JAPAN REMOTE CONTROL RF2RPA Remote Control Spread Spectrum Transceiver User Manual 1

JAPAN REMOTE CONTROL CO., LTD. Remote Control Spread Spectrum Transceiver Users Manual 1

Contents

Users Manual 1

Download: JAPAN REMOTE CONTROL RF2RPA Remote Control Spread Spectrum Transceiver User Manual 1
Mirror Download [FCC.gov]JAPAN REMOTE CONTROL RF2RPA Remote Control Spread Spectrum Transceiver User Manual 1
Document ID2429479
Application IDkk4K72l/lgEulrZmYwbuGw==
Document DescriptionUsers Manual 1
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize71.67kB (895842 bits)
Date Submitted2014-10-28 00:00:00
Date Available2015-04-26 00:00:00
Creation Date2017-10-20 18:04:47
Producing SoftwareGPL Ghostscript 9.18
Document Lastmod2017-10-20 18:04:47
Document TitleUsers Manual 1
Document CreatorMicrosoft® Excel® 2010
Document Author: yanagihara

DATA : NEM-Ci04A7RG712BX7En7manualai
DATE : 2014.08
PRINT : SANEI
ficRG7IEBX
76h 2.4GHz RECEIVER
DMSS 2.4GHz 7ch Receiver
(Coaxial Diversity Antenna mm and Telemetry)
Operation Manual
ihank you for purchasing this JR roduct.
To allow correct and safe use oft is
. iisauriertt i
product, please read this operation ”9"
MI bariton- mastic"
mutton .traaiiieiit
teemnsmn tiara-sits.
humanism
Featurls
-With DMSS, cross modulation is restricted. This high sensitivity
receiver is not easily affected by interrmodulaflon interference,
~The telemetry system is ca able ofieedirtg back information
such as receiverbatteryvo tage.
-Brand new receiver diversity antenna system gives bullet proof
signal reception like never before. These antennas are also used
tor synchronized transmission or telemetry data. providing impr-
oved signal back to your transmitter.
-The optional remote antenna adds an even greater layer or security.
-It is possible to confirm receiver operation by way oi LED‘s.
~5upports transmittersetting oiiail sate.
Configuration
omrizax ReceiverMaill Urit .B'irid Plug
.Operation Manual lthis document)
To allow safe use, be certain to obse we the following points
.Basic precautions for safe operation
(I l The Z AGHI hand is nota lrequency exclusively iol use with RC aircraft
The band is partufthe lMS (Industry, science, and medical care)
trequency allocation, which is widely used tar shortcdistance
transmissions such as miciowave ovens. wireless LAN, dlgllal cordleS
phones, gaming devices, em Because oislgnal congestion, the
response or any 2.46m system may be reduced in urban areas in the
event or any iriterterence, immediately cease operation and attempt
to identity the interterence source
(ZlAt lacellacksand allfieldsminimlzethe use of devices that operate
on the ZAGHI hand. Be sure to perrorrn an adequate range check
betore commencing operation.
[3i Always maintain lineoi sight with thedliclaft as 2.4GHz signals may
be blocked by buildings, trees, etc. Always fly the alrciaft where it can
be usually observed,
In ardent) prevmtirtittrytotheoperatiorordirdpartis
(crdamageto property). phaseobservethefdlawirtg
A DANGER
Not tollowrng this advice carries high rlsk or death or serious
injury to the user or third parties.
0 Do not use this product inthe rain as water may cause electronic
devices to malfunction,
.This productcarrres a risk ori rydue to heat fire, and erectnc shock.
everdisaeeinbie or rnodiry tlils product,
when turning on the iecervei, the engine [or motor) can start rotating
athigh speed,causlng lnlu'y.
0 Before turning on, always set thetransmitter throttle stickto the
lowest speed position Turn on the transmitter first then the receiver,
Toshut down, switch ofitle receiver (rm and then rite transmitter.
Receiver Spec:
riadrn iiuiiiltei imizsx
iiete‘rrrrig System i oiainel bliss System
waolit lsg
Dimcntoni l4 5x 15.5X47.5"Ill
ostrairrg voted: 4 saw
itemartt Coaxial antenna yintenraitoaxiaii iu'lmrnm
Telemetry sensor
isold s arateiyi
SENSOR
Connec
on Sensor Connections
whenconnecting sensors,
use a ir-rtarnessisaid separatelyi
he
lElND/BATl/SENSI terminal
- it isnot necessary to retaind
the receiver arteradding
sensors
Receivcrlsattery
isold separateiyi
codsepararelyi
Switch Harnss
(sold separatelyi
RG7! 28X Receiver
airs sysierri product
vvrien inserting the
mnnectors hire note
olthetorrertdirection
Werecornmend youad- an options J-
rernoteantenna whenyou urethis
receiverrn very demanding envirorments For exam le where
remote menu- the model is constructed trorri materials which shie he istrdi
lsald seaarareivi as tarpon noeri
Note» Aiter addng a remote antenna you must rebrnd to ensue correct runctionalriy
A WARNING
Nottollowrng this athrtce may result in death or serious iniury to
the useror third parties.
0 Do not use this receiver in combinatlon wltl't other ma’iufaclulers
products such as servos, gyros etc
oNeverallovvthereceivertoreceivea strong rmpactasthe electronic
components in the receiver are susceptible to damage.
.lidegraded servo movement is detected, stop operating immediately
identity the source oithe problem before further operation (check
battery yolta e,etc),
. Do not use e product In the following locations, as there will be a
risk oian outcotrcoritiol condition or accident
~ where interrerence exists ~Wherethere istrathc passing nearby,
. Near high-tension electric lines, bulldiitgs,orlri rriountarnousareas, etc
ear houses or people. - Near radio or TV transmitters
O lithe reca‘ver becomes submerged in water, it may appear to operate
irorrrialiy after being hilly dried. However, it may ntairunction ata later
hrne Do notconti‘nueto use the product -Contact your JR distributor
toairange an inspection.
A CAUTION
Nottollowtng this advicerriay (auselnjury tothe userorthrrd party
tor cause damageto property).
setore use, theciithe following:
.ls there enough battery voltage forboth thetransmltter and receiver?
.Ls there any fuel s illage on the receiver, servos, etc. that wascaused by
leaitagetroin the uel tank7 lsthere enough iuel7
.Check that no linkage interreies win the aiicrait body Conduct a
vibration test by restraining the model and setting the engine (or
motor) to full power whilst keeping your hands well clear Dime
rcpellei, Checkthateach Control surface moves correctly. For the
initial rlights or a new rnodel always in in a sate place, avoid rl rig at
greatdistance,and keep the model closetothelanding area rseveral
minutes until you arel‘uly confident that the receiver is operating
correctly.
lit you haverurtiier questions. please contact your local dealer
or JRdistributor in your country.
l—
nsta a n 0! the rec er antennas
The antenna tip should always be fixed in a strai? ht positionThe antenna tip should never be bent ortut. Be sure to
osition the antenna as farflom Carbon materia sor metal pieces as actital. Please note that carbon, metal, battery, fuel
ank and etc, may block RF sr nals‘Therefore lt l5 recommended to p ace the antenna. least 10mm awayflom these
shleldlng matenalslfthe fuse age ls made otmatenal whlch shrelds RF, be sure to osmon theantenna tl ns outsrdethe
fuselage byat least 30mm. mm mwwmhomwm R ®DONOTbendlhe antennatip!
aesueto pla
Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Print, Extract, Print high-res
Author                          : yanagihara
Create Date                     : 2014:10:28 17:12:24+09:00
Modify Date                     : 2014:10:28 11:05:51-04:00
Language                        : ja-JP
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Format                          : application/pdf
Creator                         : yanagihara
Creator Tool                    : Microsoft® Excel® 2010
Metadata Date                   : 2014:10:28 11:05:51-04:00
Producer                        : Microsoft® Excel® 2010
Document ID                     : uuid:27164313-f5a4-48b3-aab0-558937b2b56d
Instance ID                     : uuid:07f992b8-ea66-4e2f-9900-b6df702ef584
Page Count                      : 3
EXIF Metadata provided by EXIF.tools
FCC ID Filing: AXG-RF2RPA

Navigation menu