JBT Smart Lighting 890001 Gateway User Manual WiFi turn Bluetooth Gateway 1

Download:
Mirror Download [FCC.gov]
Document ID	4006540
Application ID	x25oRgNzeuIZMzQAd++Fmg==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	24.31kB (303913 bits)
Date Submitted	2018-09-14 00:00:00
Date Available	2018-09-14 00:00:00
Creation Date	2018-09-14 08:37:43
Producing Software	Acrobat Distiller 9.0.0 (Windows)
Document Lastmod	2018-09-14 08:37:43
Document Title	Microsoft Word - WiFi turn Bluetooth Gateway_1_
Document Creator	PScript5.dll Version 5.2.2
Document Author:	USER

Gateway
March
h 1st 2017
Ga
atew
way
S ecificcatio
Spe
on V1.0
V 0
Date
201
17‐03‐01
Version
V1.0
Update record
Author
Firstt time
Ben Lee
015 All rights of those documents reseerved by Shen
nzhen JBT Smart Ligh
hting Co.,
©20
LTD
DThe informatiion contained in this document and the acctual companyy and product name mentiooned
in thiis document are
a all Shenzhen JBT Sm
mart Lightin
ng Co., LTD
D（ shortsfo
or：
“ JBTorOur
com
mpany“）Copyright
owne
er or owner's trademark。
No part
p of this doccument shall be
b reproduced
d, stored in any
y retrieval system, or transm
mitted without the
专业物联网模块及智能家居系统方案提供商
官网：http://www.antheroiot.com
written consent of the ant hero. After the update the new version, this document without prior notice.
Index
1.Product introduction .............................................................................................................. 1
1.1Product description .............................................................................................................. 1
1.2 Product features .................................................................................................................. 1
1.3 Product usage ...................................................................................................................... 1
2. Technical specification .......................................................................................................... 1
2.1Behaviour of electricity ............................................................................................................. 1
2.2 WiFi moudles ....................................................................................................................... 1
2.3 Bluetooth communication moudles .............................................................................. 2
2.4 Circuit design ....................................................................................................................... 2
3. Instuction manual .................................................................................................................. 3
3.1 Usage condition ................................................................................................................. 3
3.2 Deployment diagram ........................................................................................................... 4
3.3 Cautions ............................................................................................................................... 5
深圳市蚂蚁雄兵物联技术有限公司
电话：0755-61865256地址：深圳宝安沙井中心路102号时代中心19楼
专业物联网模块及智能家居系统方案提供商
官网：http://www.antheroiot.com
1. Product introduction
1.1 Production description:
WiFi to bluetooth gateway is a gateway developed by our company for Amazon's voice assistant
Echo, which can receive voice commands through the WiFi module of the gateway, The Bluetooth
module is converted into bluetooth signal and sent to the corresponding bluetooth device, so as to
achieve the effect of controlling the bluetooth device. The gateway integrates the WiFi module of
ESP8266 and the bluetooth module of BLE1046, with features of low power consumption, strong stability
and Bluetooth Mesh networking.
1.2 Product features
◆Using WiFi to connect to the Internet, the network communication stability is high.
◆With the function of bluetooth Mesh networking, bluetooth one-to-many communication can be
realized
◆The bluetooth communication distance of Mesh is far, and it can even cover the whole house, far
exceeding the 20-meter limit of bluetooth communication in the market.
◆Voice control can be realized with Amazon's voice assistant
1.3 Product usage:
This gateway can be applied to the scheme of smart home. It can be matched with corresponding
bluetooth devices and voice control through Echo.
2. Technical specification
2.1Behaviour of electricity
Product model
Gateway
Input voltage
DC 5V
Working power
<130mA
Standby power consumption
<90mA
Bluetooth communication distance
20m
2.2WiFi Module
ESP8266 is a wi-fi module that fully complies with 802.11b/g/n wireless protocol. It integrates a
complete TCP/IP protocol stack internally, including an arm-cm3 MCU, WLAN MAC and a single-stream
WLAN baseband。The module includes onboard antenna, external antenna interface and rf output pin.
ESP8266 Integrated TCP/IP protocol stack, support ARP, IP, ICMP, TCP, UDP, DHCP CLIENT, DHCP
SERVER, DNS and other protocols. Support AP, Station, AP+Station modes. ESP8266 provides a wealth
of AT commands for various applications, enabling users to easily and quickly use modules to network
and send and receive data. The ESP8266 module also supports transparent transmission, enabling
individual or batch configuration parameters through the use of PC tools, mobile apps and other tools,
and then the module can connect the serial port and network to be used normally. The serial port baud
rate of ESP8266 module can support up to 921600bps, which fully satisfies low speed applications.
Features below：
◆Supports command and transparent transport modes.
◆Support multiple baud rates with a maximum baud rate of 921600.
◆ Support wireless configuration and OTA firmware upgrades.
◆ Support UART interface, OTW upgrade function.
◆ Easyconfig supports one-click networking.
◆ Support AP, STA, AP+STA modes.

2.3Bluetooth communication module

Bluetooth module can build strong network nodes with very low material cost. In accordance with
bluetooth specification, it can be applied to wireless sensor, control and data acquisition. At the same
time, special firmware is developed for LED lighting application, which supports switch, timing, grouping,
scenario mode, firmware wireless upgrade, parameter setting and other functions.
The bluetooth module is integrated on the sensor to allow the sensor and the corresponding
bluetooth lamps to form a network to achieve wireless control of the lighting device. At the same time, the
sensor height can also be customized through the supporting APP, such as the timing switch of the
sensor, the length of switching time, etc.
Features below:
◆
◆
◆
◆
◆
◆
◆
◆
Supports Bluetooth Mesh.
Support 5-channel PWM output, I2C, UART external communication interface.
Support point-to-point and point-to-point communication.
For LED lighting, firmware wireless upgrade, parameter setting and other functions.
1Mbps wireless communication rate.
512KB Flash chip on board, can save user data when power off.
Small size, low cost, low power consumption, high sensitivity to sending and receiving.
According to bluetooth specification, it can be used for wireless sensor, control and data
acquisition
.◆ Adaptive frequency hopping technology, high performance wireless transceiver system.
◆ The communication distance of open ground is about 150 meters, and the indoor
communication distance is about 50 meters.
2.4 Circuit design
WiFi
Module Circuit design
Application circuit of bluetooth module
3. Instruction manual
3.1 Usage condition:
The gateway needs to connect to the network and receive commands sent from the server side
The gateway needs to connect to the network and receive commands sent from the server side。The
gateway is connected to the network through wifi, so the gateway should be deployed where it can
receive stable WIFI signals. At the same time, The gateway communicates with other terminal devices
through bluetooth signals, so the gateway should not be too far away from the terminal device. It is
recommended not to exceed 20 meters. If the distance between the terminal device and the gateway is
completely isolated, Then the communication distance will be shortened accordingly。But this gateway
USES bluetooth support Mesh, so only ask the latest bluetooth devices within the effective
communication, and the distance between the other bluetooth devices in effective communication range.
3.2 Deployment diagram
3.3 Cautions:
（1）WIFI module antenna of this gateway is onboard, so the wifi reception capacity will be lower
than laptops, is likely to be less than a small number of mobile phone, so please set the gateway
deployment where wifi signal is stable and strong enough
（2）The bluetooth module of this gateway and other bluetooth terminals communicate through
Mesh, so the gateway and other devices must be in the same Mesh network before they can be used
normally.
FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired
operation.
Any changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
‐‐ Reorient or relocate the receiving antenna.
‐‐ Increase the separation between the equipment and receiver.
‐‐ Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
‐‐ Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be
installed and operated with minimum 20cm distance between the radiator and your body:
Use only the supplied antenna.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : USER
Create Date                     : 2018:09:14 08:37:43+08:00
Modify Date                     : 2018:09:14 08:37:43+08:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Creator Tool                    : PScript5.dll Version 5.2.2
Format                          : application/pdf
Title                           : Microsoft Word - WiFi turn Bluetooth Gateway_1_
Creator                         : USER
Producer                        : Acrobat Distiller 9.0.0 (Windows)
Document ID                     : uuid:a2a5a63e-5a3d-4851-9e61-d05f240d68b5
Instance ID                     : uuid:4863b5cf-0f74-4e84-8cc0-cb6fe3afc913
Page Count                      : 7

EXIF Metadata provided by EXIF.tools