JET OPTOELECTRONICS 3010DABOX01 3010-DA Control Box (Plastic) / 3010-DA Control Box (metal) User Manual 3010DA 20120514

Download:
Mirror Download [FCC.gov]
Document ID	1698949
Application ID	VCfSpZTXEzvxYyspFm4ytQ==
Document Description	user manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	33.84kB (422958 bits)
Date Submitted	2012-05-16 00:00:00
Date Available	2012-05-16 00:00:00
Creation Date	2017-10-31 16:14:54
Producing Software	GPL Ghostscript 9.18
Document Lastmod	2017-10-31 16:14:54
Document Title	3010DA User manual 20120514 .xls
Document Creator	PScript5.dll Version 5.2.2
Document Author:	VeraHsu

3010-DA User’s manual
一
Wi i ：Power
Wiring
：P
SSupply
l 12
12~16
16 DCV
MODULE Connection instructional diagram
，
二
Explanation & Specification：
Monitor A
Monitor B
1
WIRE CABLE FUNCTION NAME
To Power supply DCV：12V~16V
To Monitor A Red Connector Power & AV Output
To Monitor A White Connector AV Input & I2C
To Ear phome Audio Aux Output
To FM Antenna Output 88.3 MHz ~107.7 MHz
To Monitor B Blue Connector AV Input & I2C
To Monitor B Black Connector Power & AV Output
FM Transmitter frequency ： 88.3MHz ~107.7 MHz
三、 Operating Instructions
A.
POWER ON/OFF
y opened
the Monitor A and Monitor B. The look at the screen is normal
1. Press the Power key,
B.
C.
Monitor A SOURCE button to switch the screen (Monitor A.Monitor B. AUX. TV).
Or p
press the Monitor B SOURCE button to switch the screen ((Monitor B. AUX. TV.Monitor A).
To each other to see the picture and sound are normal.
FM Modulator Playback
1 To listen to the audio portion of the viewed source though the vehicle’s
2 stereo system aim the remote at the driver’s side monitor and simply press the
Sound Around (ON / OFF) button to turn the FM modulator on. The screen will now display
FM SOURCE: Monitor A . The Audio portion of the source originating from
the Driver's side headrest will now be audible through the vehicle's stereo. If a
different audible source is desired, press the Sound Around (ON / OFF) button again to select
Fm output ON and OFF. Once the desired audible source
has been selected, the transmitting frequency the FM modulator transmits on
can be changed by pressing the Sound Around (Select) button on the remote. Tune the vehicle’s
radio to the corresponding station to listen to the source that is displayed
on the driver’s side monitor.
To change the transmitting frequency, aim the remote at the driver’s side
monitor and press the Sound Around (Select) button. Each press of the button advances the
frequency as follows:
(1. 88.3， 2. 88.7 , 3. 89.1 , 4. 89.5 , 5.89.9 , 6.90.3MHZ Circulating).
The radio automatically search the radio to find the same with the Monitor A channel.
Listen to the radio, the sound is clear with or without noise or interference
(AUDIO sound source only from the Monitor A)
H
And then CH + / CH-(UP / DOWN) key, press the remote control
the Sound Around (SELECT) button to start the FM the OSD Office.
Each time you press a frequency increment or decrement 200KHZ.
The whole frequency range of FM of CH 88.3 to FMCH 107.7MHZ.
Using full-frequency (before 88.3 , 99.5 , 107.7 three)
radio must also channel the correct position.
按壓一次跳
HZ
When you want to leave when not in use,
Press the power the key to turn off the Monitor A and Monitor B Power.
This video product is designed and intended for positioning in back seating
areas of a vehicle where it cannot be viewed directly or indirectly by the driver
and possibly cause him/her to be distracted from the task of operating the
vehicle. Driver distraction is a major cause of accidents and for this reason
many states specifically prohibit the viewing of motion video within view of the
driver while the vehicle is in motion.
Th REV
The
REV-LT
LT system
ffeatures
auxiliary
ili
componentt RCA input
t jacks
j k on the
th
A/V Control Module. Devices connected to this input can be viewed on
either screen (independently or simultaneously), as well as output through
the vehicle stereo via the 3010-DA Control Box FM Transmitter. To view this input press
the SOURCE button until EXT. AUX is displayed.
NOTE: Consult your installer to determine how to access this input.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B conforme á la norme NMB-003 du Canada.
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the
following twoconditions: (1) this device may not cause interference,
interference and (2) this device must accept
any interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts
L'exploitation est autorisée aux deux conditions suivantes:(1) l'appareil ne doit pas produire de brouillage,
et(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi,
même si le brouillage est susceptible d
d'en
en compromettre le fonctionnement.
For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other
channels is not possible.
This device and its antenna(s)
( ) must not be co-located or operation in conjunction with any other
antenna or transmitter.
Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a
type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential
radio interference to other users, the antenna type and its gain should be so chosen that the equivalent
isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication.
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
●
●
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
●
Connect the equipment into an outlet on a circuit different from that to which the receiver is connect
●
Consult
l the
h d
dealer
l or an experienced
d radio/TV
di /TV technician
h i i ffor h
help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Print, Extract, Print high-res
Author                          : VeraHsu
Create Date                     : 2012:05:14 17:37:47+08:00
Modify Date                     : 2012:05:14 17:45:23+08:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Format                          : application/pdf
Creator                         : VeraHsu
Title                           : 3010DA User manual 20120514 .xls
Creator Tool                    : PScript5.dll Version 5.2.2
Metadata Date                   : 2012:05:14 17:45:23+08:00
Producer                        : Acrobat Distiller 9.2.0 (Windows)
Document ID                     : uuid:7641ed6c-07bc-46a8-95a5-a04567c5eddd
Instance ID                     : uuid:6f1f819d-fafc-45dd-91d0-3525076ac8a9
Page Count                      : 7

EXIF Metadata provided by EXIF.tools