JETOP IBC233B BLUETOOTH CD/RADIO BOOMBOX User Manual

JETOP INDUSTRIAL LIMITED BLUETOOTH CD/RADIO BOOMBOX

User Manual

AC power input: requires an AC power cable (included)IBC233B Bluetooth BoomboxWarning: Changes or modications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.• Consult the dealer or an experienced radio/TV technician for help.• To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna. Pour respecter les directives d’exposition RF de la FCC, cet équipement doit être installé et utilisé à une distance minimum entre 20cm le radiateur de votre corps: Utilisez uniquement l’antenne fournie. • The apparatus shall not be exposed to dripping or splashing and that no objects lled with liquids, such as vases, shall be placed on apparatus. L’appareil ne doit pas être exposé aux écoulements ou aux éclaboussures et aucun objet ne contenant de liquide, tel qu’un vase, ne doit être placé sur l’objet.• Main plug is used as disconnect device and it should remain readily operable during intended use. In order to disconnect the apparatus from the mains completely, the mains plug should be disconnected form the mains socket outlet completely. La prise du secteur ne doit pas être obstruée ou doit être facilement accessible pendant son utilisation. Pour être complètement déconnecté de l’alimentation d’entrée, la prise doit être débranchée du secteur.• Battery shall not be exposed to excessive heat such as sunshine, re or the like. Les piles ne doivent pas être exposées à de forte chaleur, tel qu’à la lumière du soleil, au feu ou autres choses de semblable.• Caution marking is located at the rear or bottom of the apparatus. Attention marquage est situé sur le paneau arrière ou inférieur de l’unité.• The marking information is located at the rear or bottom of apparatus. Le marquage est situé sur le paneau arrière ou inférieur de l’unité.1. Read these Instructions.2. Keep these Instructions.3. Heed all Warnings.4. Follow all instructions.5. Do not use this apparatus near water.6. Clean only with a dry cloth.7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampliers) that produce heat.9. Do not defeat the safety purpose of the polarized or grounding - type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. When the provided plug does not t into your outlet, consult an electrician for replacement of the obsolete outlet.10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.11. Only use attachments/accessories specied by the manufacturer.12. Use only with a cart, stand, tripod, bracket, or table specied by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. Unplug this apparatus during lightning storms or when unused for long periods of time.13. Refer all servicing to qualied service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.• CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.• WARNING:To reduce the risk of re or electric shock, do not expose this apparatus to rain or moisture.• AVERTISSEMENT: Pour réduire le risque d’incendie ou de choc électrique, ne pas exposer cet appareil sous la pluie et l’humidité.• CAUTION: Use of controls or adjustments or performance of procedures other than those specied may result in hazardous radiation exposure.• WARNING: Changes or modications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.• WARNING:Do not place this unit directly onto furniture surfaces with any type of soft, porous, or sensitive nish. As with any rubber compound made with oils, the feet could cause marks or staining where the feet reside. We recommend using a protective barrier such as a cloth or a piece of glass between the unit and the surface to reduce the risk of damage and/or staining.• WARNING: Use of this unit near uorescent lighting may cause interference regarding use of the remote. If the unit is displaying erratic behavior move away from any uorescent lighting, as it may be the cause.• CAUTION:Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.• PRÉCAUTION: Danger d’explosion si les piles sont remplacées de façon incorrect. Remplacer les piles seulement par le même type de pile ou l’équivalent.• WARNING: There is a danger of explosion if you attempt to charge standard Alkaline batteries in the unit. Only use rechargeable NiMH batteries.• WARNING: The remote control’s button cell battery contains mercury. Do not put in the trash, instead recycle or dispose of as hazardous waste• WARNING:Lithium batteries, like all rechargeable batteries are recyclable and should be recycled or disposed of in normal household waste. Contact your local government for disposal or recycling practices in your area. They should never be incinerated since they might explode.• WARNING: Shock hazard - Do Not Open.• AVIS: RISQUE DE CHOC ÉLECTRIQUE - NE PAS OUVRIRMains plug is used as disconnect device and it should remain readily operable during intended use. In order to disconnect the apparatus from the mains completely, the mains plug should be disconnected form the mains socket outlet completely. La prise du secteur est utilisé pour déconnecter le système.La prise du secteur ne doit pas être obstruée ou doit être facilement accessible pendant son utilisation. Pour être complètement déconnecté de l’alimentation d’entrée, la prise doit être débranchée du secteur.Do not mix old and new batteries.Do not mix alkaline, standard (carbon-zinc), or rechargeable (ni-cad, ni-mh, etc) batteries.No mezcle baterías viejas y nuevas.No mezcle baterías alcalinas, estándar (carbono-zinc) o recargables (ni-cad, ni-mh, etc.).WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.ATTENTIONRISQUE D' ÉLECTROCUTIONNE PAS OUVRIRCAUTIONRISK OF ELECTRIC SHOCKDO NOT OPENThe exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.This symbol indicates that this product incorporates double insulation between hazardous mains voltage and user accessible parts.The lightning ash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufcient magnitude to constitute a risk of electric shock to persons.IMPORTANT SAFETY INSTRUCTIONSIntroduction and SetupFCC WarningsPowerRequires 6 C batteries (not included)Battery BackupAdditional WarningsWARNINGS AND PRECAUTIONSFor Warranty Information and the most up-to-date version of this User’s Guide, go to www.iLiveElectronics.com Customer Service: 1-888-999-4215Email Support: prodinfo@dpiinc.com, Email Parts: partsinfo@dpiinc.comCopyright © 2012 Digital Products International (DPI, Inc.) All other trademarks appearing herein are the property of their respective owners. Specications are subject to change without notice.USER’S GUIDEV:884-02SOURCEPRESET-/ PRESET+/ PROG/MEMPAIR/TUN+/TUN-/VOL- VOL+Telescopic FM AntennaVolumePress to adjust the volume.SourcePress to switch between CD, Bluetooth, Line In, and FM Radio modes.Tun/Skip/SearchIn FM Radio mode, press to tune the radio. Press and hold to search for the next available station. In CD mode, press to skip to the next track. Press and hold to search. In Bluetooth mode, press to skip to the next track.Prog/MemIn CD Mode, press to program tracks to play in a specic order. In FM Radio mode, press to begin saving a station as a preset. Preset-/RepeatIn FM Radio mode, press to cycle though preset stations. In CD Mode, press to repeat the current track. Press twice to repeat the entire album.Preset+/StopIn FM Radio mode, press to cycle though preset stations. Press to stop the current track.Pair/Play/PausePress to begin pairing a Bluetooth device. Press to play or pause the current track.PowerPress to turn the unit on or off.Line InLINE IN
RadioTuning the FM RadioTuning to a Preset Radio StationRadio ReceptionTo download this User’s Guide in English, Spanish, or French, or to get answers to frequently asked questions, visit the support section at: www.iLiveElectronics.comPara descargar este Manual del Usuario en inglés, español y francés, o para obtener respuestas a preguntas frecuentes, visite la sección de apoyo en www.iLiveElectronics.comPour télécharger ce guide de l’utilisateur en anglais, espagnol ou français, ou pour obtenir des réponses à des questions fréquemment posées, consultez la rubrique d’assistance sur www.iLiveElectronics.comInternational SupportFor Warranty Information and the most up-to-date version of this User’s Guide, go to www.iLiveElectronics.com Customer Service: 1-888-999-4215Email Support: prodinfo@dpiinc.com, Email Parts: partsinfo@dpiinc.comCopyright © 2012 Digital Products International (DPI, Inc.) All other trademarks appearing herein are the property of their respective owners. Specications are subject to change without notice.Requires a 3.5mm audio cable (not included)1. Connect the 3.5mm audio cable to the Line In on the unit and an audio output on an MP3 player or other audio source.2. Press the Source button to switch to Line In mode.3. Use the native controls on the connected MP3 player or other audio source to play and control audio played through the clock radio.Line InUsing the Line InBluetooth SetupPairing a Bluetooth Device for the First Time1. Power on the unit by pressing the Power button.2. Press the Source button to switch to Bluetooth Mode.The display will show the letters “BT” and “bt”.3. “bt”will ash on the display.When pairing, remain within 3 feet of the unit.If the unit does not automatically begin to pair, press the Pair button.4. Using the native controls on your Bluetooth device, select the “IBC233” in your Bluetooth settings to pair.If your device requests a password, enter the default password “ 0 0 0 0 ”. Refer to the user’s manual for your specic device for instructions on pairing and connecting Bluetooth devices.5. When successfully paired, the display will stop ashing. After initial pairing, the unit will stay paired unless unpaired manually by the user or erased due to a reset of the device. If your device should become unpaired, follow the above steps again.If any pairing issues should occur, un-pair the unit on your Bluetooth device and follow the above steps again. 1. Follow the instructions for Pairing a Bluetooth Device.2. Use the native controls on the connected Bluetooth Device to select a track.3. To play, pause or skip the selected track, use the native controls on the connected Bluetooth Device or press the Pair/Play/Pause or Tun/Skip/Search buttons.4. Audio played through the connected Bluetooth device will now be heard through the speakers. Playing Audio WirelesslySaving a Station as a Preset1. Press the Source button to switch to FM Radio mode.2. Press the Tun/Skip/Search buttons to tune the radio manually, press and hold to search for the next available station. Adjust the position of the Telescopic FM Antenna to improve FM radio reception.1. Follow the instructions for Playing the Radio.2. Press the Prog/Mem button.3. Press the Tun/Skip/Search to select a preset number.Up to 20 stations may be preset.4. Press the Mem button to save the current station to the selected preset.1. In FM Radio mode, press the Preset-/Repeat and Preset+/Stop buttons to cycle through saved presets.CDLoading a CD1. Open the Disc Door.2. Place a CD into the unit, label side facing up.3. Close the Disc Door.Playing a CD1. Follow the instructions for Loading a CD.2. Press the Source button to switch to CD mode.3. Press the Pair/Play/Pause button to begin playing the loaded CD.Programming a CD1. Follow the instructions for Loading a CD and Playing a CD.2. Press the Prog/Mem button.3. Press the Tun/Skip/Search buttons to select a track.4. Press the Prog/Mem button to save the track to the program. 5. Repeat step 3 and 4 until the desired number of CD tracks are programmed.6. Press the Play button to begin playing the program.Note: This unit is not compatible with MP3 CDs.

Navigation menu