JETOP IBC233B BLUETOOTH CD/RADIO BOOMBOX User Manual
JETOP INDUSTRIAL LIMITED BLUETOOTH CD/RADIO BOOMBOX
JETOP >
User Manual
AC power input: requires an AC power cable
(included)
IBC233B Bluetooth Boombox
Warning: Changes or modications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
• To maintain compliance with FCC’s RF Exposure guidelines, This equipment
should be installed and operated with minimum distance between 20cm the
radiator your body: Use only the supplied antenna.
Pour respecter les directives d’exposition RF de la FCC, cet équipement doit
être installé et utilisé à une distance minimum entre 20cm le radiateur de votre
corps: Utilisez uniquement l’antenne fournie.
• The apparatus shall not be exposed to dripping or splashing and that no
objects lled with liquids, such as vases, shall be placed on apparatus.
L’appareil ne doit pas être exposé aux écoulements ou aux éclaboussures et aucun
objet ne contenant de liquide, tel qu’un vase, ne doit être placé sur l’objet.
• Main plug is used as disconnect device and it should remain readily operable during
intended use. In order to disconnect the apparatus from the mains completely, the
mains plug should be disconnected form the mains socket outlet completely.
La prise du secteur ne doit pas être obstruée ou doit être facilement
accessible pendant son utilisation. Pour être complètement déconnecté de
l’alimentation d’entrée, la prise doit être débranchée du secteur.
• Battery shall not be exposed to excessive heat such as sunshine, re or the like.
Les piles ne doivent pas être exposées à de forte chaleur, tel qu’à la
lumière du soleil, au feu ou autres choses de semblable.
• Caution marking is located at the rear or bottom of the apparatus.
Attention marquage est situé sur le paneau arrière ou inférieur de l’unité.
• The marking information is located at the rear or bottom of apparatus.
Le marquage est situé sur le paneau arrière ou inférieur de l’unité.
1. Read these Instructions.
2. Keep these Instructions.
3. Heed all Warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as
radiators, heat registers, stoves, or other apparatus
(including ampliers) that produce heat.
9. Do not defeat the safety purpose of the polarized
or grounding - type plug. A polarized plug has two
blades with one wider than the other. A grounding
type plug has two blades and a third grounding
prong. The wide blade or the third prong are
provided for your safety. When the provided plug
does not t into your outlet, consult an electrician
for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or
pinched particularly at plugs, convenience receptacles,
and the point where they exit from the apparatus.
11. Only use attachments/accessories
specied by the manufacturer.
12. Use only with a cart, stand, tripod, bracket, or table
specied by the manufacturer, or sold with the
apparatus. When a cart is used, use caution when
moving the cart/apparatus combination to avoid injury
from tip-over. Unplug this apparatus during lightning
storms or when unused for long periods of time.
13. Refer all servicing to qualied service personnel.
Servicing is required when the
apparatus has been damaged in
any way, such as power-supply
cord or plug is damaged, liquid
has been spilled or objects have
fallen into the apparatus, the
apparatus has been exposed to
rain or moisture, does not operate
normally, or has been dropped.
• CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE
BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
• WARNING:To reduce the risk of re or electric shock, do
not expose this apparatus to rain or moisture.
• AVERTISSEMENT: Pour réduire le risque d’incendie ou de choc
électrique, ne pas exposer cet appareil sous la pluie et l’humidité.
• CAUTION: Use of controls or adjustments or performance of procedures
other than those specied may result in hazardous radiation exposure.
• WARNING: Changes or modications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
• WARNING:Do not place this unit directly onto furniture surfaces with any type of soft, porous,
or sensitive nish. As with any rubber compound made with oils, the feet could cause marks
or staining where the feet reside. We recommend using a protective barrier such as a cloth or a
piece of glass between the unit and the surface to reduce the risk of damage and/or staining.
• WARNING: Use of this unit near uorescent lighting may cause interference
regarding use of the remote. If the unit is displaying erratic behavior move
away from any uorescent lighting, as it may be the cause.
• CAUTION:Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
• PRÉCAUTION: Danger d’explosion si les piles sont remplacées de façon incorrect.
Remplacer les piles seulement par le même type de pile ou l’équivalent.
• WARNING: There is a danger of explosion if you attempt to charge standard
Alkaline batteries in the unit. Only use rechargeable NiMH batteries.
• WARNING: The remote control’s button cell battery contains mercury. Do
not put in the trash, instead recycle or dispose of as hazardous waste
• WARNING:Lithium batteries, like all rechargeable batteries are recyclable and should be
recycled or disposed of in normal household waste. Contact your local government for disposal
or recycling practices in your area. They should never be incinerated since they might explode.
• WARNING: Shock hazard - Do Not Open.
• AVIS: RISQUE DE CHOC ÉLECTRIQUE - NE PAS OUVRIR
Mains plug is used as disconnect device and it should remain readily operable during
intended use. In order to disconnect the apparatus from the mains completely, the
mains plug should be disconnected form the mains socket outlet completely.
La prise du secteur est utilisé pour déconnecter le système.
La prise du secteur ne doit pas être obstruée ou doit être facilement
accessible pendant son utilisation. Pour être complètement déconnecté de
l’alimentation d’entrée, la prise doit être débranchée du secteur.
Do not mix old and new batteries.
Do not mix alkaline, standard (carbon-zinc), or rechargeable (ni-cad, ni-mh, etc) batteries.
No mezcle baterías viejas y nuevas.
No mezcle baterías alcalinas, estándar (carbono-zinc) o recargables (ni-cad, ni-mh, etc.).
WARNING: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER-
SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE
PERSONNEL.
ATTENTION
RISQUE D' ÉLECTROCUTION
NE PAS OUVRIR
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and maintenance
(servicing) instructions in the literature
accompanying the appliance.
This symbol indicates that this product
incorporates double insulation between hazardous
mains voltage and user accessible parts.
The lightning ash with arrowhead symbol,
within an equilateral triangle, is intended to alert
the user to the presence of uninsulated “dangerous
voltage” within the product’s enclosure that may
be of sufcient magnitude to constitute a risk of
electric shock to persons.
IMPORTANT SAFETY INSTRUCTIONS
Introduction and Setup
FCC Warnings
Power
Requires 6 C batteries (not included)
Battery Backup
Additional Warnings
WARNINGS AND PRECAUTIONS
For Warranty Information and the most up-to-date version of this User’s Guide, go to www.iLiveElectronics.com Customer Service: 1-888-999-4215
Email Support: prodinfo@dpiinc.com, Email Parts: partsinfo@dpiinc.com
Copyright © 2012 Digital Products International (DPI, Inc.) All other trademarks appearing herein are the property of their respective owners. Specications are subject to change without notice.
USER’S GUIDE
V:884-02
SOURCE
PRESET-/ PRESET+/ PROG/
MEM
PAIR/
TUN+/TUN-/
VOL- VOL+
Telescopic FM
Antenna
Volume
Press to adjust the
volume.
Source
Press to switch
between CD,
Bluetooth, Line In, and
FM Radio modes.
Tun/Skip/Search
In FM Radio mode,
press to tune the
radio. Press and hold
to search for the next
available station. In
CD mode, press to
skip to the next track.
Press and hold to
search. In Bluetooth
mode, press to skip to
the next track.
Prog/Mem
In CD Mode, press to
program tracks to play
in a specic order.
In FM Radio mode,
press to begin saving
a station as a preset.
Preset-/Repeat
In FM Radio mode,
press to cycle though
preset stations.
In CD Mode, press
to repeat the current
track. Press twice
to repeat the entire
album.
Preset+/Stop
In FM Radio mode,
press to cycle though
preset stations. Press
to stop the current
track.
Pair/Play/Pause
Press to begin pairing
a Bluetooth device.
Press to play or pause
the current track.
Power
Press to turn the unit
on or off.
Line In
LINE IN
Radio
Tuning the FM Radio
Tuning to a Preset Radio Station
Radio Reception
To download this User’s Guide in English,
Spanish, or French, or to get answers to
frequently asked questions, visit the support
section at: www.iLiveElectronics.com
Para descargar este Manual del Usuario en
inglés, español y francés, o para obtener
respuestas a preguntas frecuentes, visite la
sección de apoyo en www.iLiveElectronics.
com
Pour télécharger ce guide de l’utilisateur en
anglais, espagnol ou français, ou pour obtenir
des réponses à des questions fréquemment
posées, consultez la rubrique d’assistance
sur www.iLiveElectronics.com
International Support
For Warranty Information and the most up-to-date version of this User’s Guide, go to www.iLiveElectronics.com Customer Service: 1-888-999-4215
Email Support: prodinfo@dpiinc.com, Email Parts: partsinfo@dpiinc.com
Copyright © 2012 Digital Products International (DPI, Inc.) All other trademarks appearing herein are the property of their respective owners. Specications are subject to change without notice.
Requires a 3.5mm audio cable (not included)
1. Connect the 3.5mm audio cable to the
Line In on the unit and an audio output
on an MP3 player or other audio source.
2. Press the Source button to switch to
Line In mode.
3. Use the native controls on the
connected MP3 player or other audio
source to play and control audio
played through the clock radio.
Line In
Using the Line In
Bluetooth Setup
Pairing a Bluetooth Device for the First Time
1. Power on the unit by pressing the Power
button.
2. Press the Source button to switch to
Bluetooth Mode.
The display will show the letters “BT” and
“bt”.
3. “bt”will ash on the display.
When pairing, remain within 3 feet of the
unit.
If the unit does not automatically begin to
pair, press the Pair button.
4. Using the native controls on your
Bluetooth device, select the “IBC233” in
your Bluetooth settings to pair.
If your device requests a password, enter
the default password “ 0 0 0 0 ”.
Refer to the user’s manual for your specic
device for instructions on pairing and
connecting Bluetooth devices.
5. When successfully paired, the display will
stop ashing.
After initial pairing, the unit will stay paired
unless unpaired manually by the user or
erased due to a reset of the device.
If your device should become unpaired,
follow the above steps again.
If any pairing issues should occur, un-pair
the unit on your Bluetooth device and
follow the above steps again.
1. Follow the instructions for Pairing a
Bluetooth Device.
2. Use the native controls on the
connected Bluetooth Device to select a
track.
3. To play, pause or skip the selected track,
use the native controls on the connected
Bluetooth Device or press the Pair/Play/
Pause or Tun/Skip/Search buttons.
4. Audio played through the connected
Bluetooth device will now be heard
through the speakers.
Playing Audio Wirelessly
Saving a Station as a Preset
1. Press the Source button to switch to FM
Radio mode.
2. Press the Tun/Skip/Search buttons to
tune the radio manually, press and hold
to search for the next available station.
Adjust the position of the Telescopic FM
Antenna to improve FM radio reception.
1. Follow the instructions for Playing the
Radio.
2. Press the Prog/Mem button.
3. Press the Tun/Skip/Search to select a
preset number.
Up to 20 stations may be preset.
4. Press the Mem button to save the current
station to the selected preset.
1. In FM Radio mode, press the Preset-/
Repeat and Preset+/Stop buttons to
cycle through saved presets.
CD
Loading a CD
1. Open the Disc Door.
2. Place a CD into the unit, label side
facing up.
3. Close the Disc Door.
Playing a CD
1. Follow the instructions for Loading a CD.
2. Press the Source button to switch to CD
mode.
3. Press the Pair/Play/Pause button to
begin playing the loaded CD.
Programming a CD
1. Follow the instructions for Loading a CD
and Playing a CD.
2. Press the Prog/Mem button.
3. Press the Tun/Skip/Search buttons to
select a track.
4. Press the Prog/Mem button to save the
track to the program.
5. Repeat step 3 and 4 until the desired
number of CD tracks are programmed.
6. Press the Play button to begin playing
the program.
Note: This unit is not compatible
with MP3 CDs.