JSW Pacific SAV-2450 Wireless Dual-Mode Color Camera Kit User Manual
JSW Pacific Corporation Wireless Dual-Mode Color Camera Kit Users Manual
Users Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 528911 |
| Application ID | zQ3UISk1kjzM9bLQ1BautQ== |
| Document Description | Users Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 201.48kB (2518490 bits) |
| Date Submitted | 2005-04-04 00:00:00 |
| Date Available | 2005-04-04 00:00:00 |
| Creation Date | 2004-12-01 15:54:25 |
| Producing Software | Adobe PDF Library 5.0 |
| Document Lastmod | 2005-03-21 16:49:10 |
| Document Title | Users Manual |
| Document Creator | HP PDF Formatter version 1.0.0.229 |
- - - -------- -[ Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. Navigator" This equipment generates, uses and can radiate radio frequency energy and, if not installed and User's Manual used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this Model No.: SAV-2450 equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one .. .. of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Walkie- Watchie Wireless Dual-Mode Color Camera Kit - 2.4GHz - Wireless Wireless Receiver with Rod Antenna PIT Color Camera FCC Caution :To assure continued compliance, any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. (Example - use only shielded interface cables when connecting to computer or peripheral devices). 00 """'u This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference !I that may cause undesired operation. )\ f\ ~ --. aaa~ aa a.O Q). 0° O~ooo PLEASE READ CAREFULLY AND SAVE This manual contains important information about this product's operation. If you are installing this product for use by others you must leave this manual -or a copy- with the end user. -= - - Model No.: SAV-2450 Walkie-Watchie Wireless Dual-Mode Color Camera Kit Important! Contents Please read this booklet carefully before installing or using these units. DANGER- HIGH VOLTAGE- These units should ONLY be opened by an authorized technician if service is required. Safety Precautions For correct and safe operation of this system, it is essential that installers, endusers and service technicians should follow all safety procedures outlineq in this manual. Specific Warning and Caution statements (and/or symbols) are marked on the units where needed. Warning and Caution Statements "WARNING" indicates a situation where failure to follow proper procedures can cause personal injury. "CAUTION" indicates a situation where failure to follow proper procedures can cause damage to the equipment. Important Safety Precautions ... Specifications Parts Included with This System , Parts of Wireless Dual-Mode Color Camera Kit - Parts of the Receiver - Parts of the Comera ... Installation - Installing Camera Mounting Bracket for wall mounting - Installing Wireless Troubleshooting Warranty Dual-mode Color Camera Kit S Guide Important Safety Precautions FCC/CE Please read before Installing Congratulations on your purchase of the Walkie-watchie Wireless Dual-Mode Color Camera Kit. Please read these safety and operating instructions carefully before installing and using this system. - Keep the camera, monitor and ACIDC adapter cord out of reach of children. - Do not place the camera, monitor or ACIDC adapter cord in a crib or playpen. - Do not use the camera near water or damp and wet environments, such as a bathtub, laundry tub, kitchen sink, or wet basements. - Locate the camera, monitor and ACIDC adapter where there is adequate ventilation. Do not locate the camera in direct sunlight. - Do not locate the camera, monitor and AC/DC adapter near heat sources such as heat registers, radiators, ovens, furnaces or other appliances with high operating temperatures. - Do not use with extension cords. Use only the ACIDC adapter provided with this system. Use of other adapters may damage the camera or monitor and void your warranty. - Only plug components into standard household voltage outlets (110V 240V AC, 50Hz or 60 Hz). - Do not place cords from the ACIDC adapters, camera or monitor where they can be pinched or stepped on. Protect the cords by keeping them out of the way of children, pets and routine household traffic. Do not place heavy objects on power cords or cover cords with rugs or carpet. - When cleaning, use a DRY, lint-free cloth. Unplug the camera, monitor and ACIDC adapter before cleaning. NEVER immerse any components in water and do not spray cleaners or solvents on the unit. Doing so may damage the unit or cause electrical shock. - Unplug the ACIDC adapter from the wall outlet when the system is not in use. - Mishandling, alterations or modifications not approved by the manufacturer will void the warranty. A CAUTION! - Connect this unit ONLY to other compatible units. Do not connect it to any other type of alarm or auxiliary device. Connecting anything else to this unit may damage it or prevent it from operating properly. A CAUTION! - Do not paint A CAUTIONI - This system uses public airwaves for wireless operation. The sound and video may be broadcast to and picked up by other 2.4 GHz receiving devices. Conversations and images from other rooms near the camera may be broadcast and picked up. To protect your privacy, always turn the camera off when not in use. 'W Video monitor equipment and cart combinations should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the equipment combination to overturn. FCC/CE NOTICE The user is cautioned that changes or modifications not expressly approved by the manufacturer could void the user's authority to operate the equipment. Linear radio controls provide a reliable communications link and fill an important need in portable wireless signaling. However, there are some limitations which must be observed. The radios are required to comply with FCC Rules and Regulations as Part 15 devices and CE I-ETS 300 440. As such, they have limited transmitter power and therefore limited range. A receiver cannot respond to more than one transmitted signal at a time and may be blocked by radio signals that occur. on or near their operating frequencies. Changes or modifications to the device may void FCC and CE compliance. Infrequently used radio links should be tested regularly to protect against undetected interference or fault. RECEIVER: CAMERA: RECEIVERDISTANCE Up to 300 Feet IMAGE SENSOR 1 Vp-o 75 Ohm AUDIO OUT 1 Vp-o 600 Ohm POWER SUPPLY 7.5V 500mA OPERATING TEMP. 32°F - 122°F O°C- 50°C DIMENSIONS WEIGHT RESOLUTION lENS 330 Horizontal TV Lines 4.3mm POWER CONSUMPTION 7.5V 500mA 1.3 Watts IllUMINATION < 6 lux with IR at F2.0 (5 meter) IRActivated Automatically Approx. 12 x 8 x 4cm (LxWxH) 113" Color CMOS Image Sensor ( Clear Line of Sight) VIDEO OUT and cart VENTILATION- Slots and openings in the cabinet and the back or bottom are provided for ventilation and to ensure reliable operation of the video monitor or equipment and to protect it from overheating. These openings must not be blocked or covered. The openings should never be blocked by placing the video monitor on a bed, sofa, rug, or other similar surface. Video monitor or equipment receiver should never be placed near or over a radiator or heat register. Video monitor or equipment receiver should not be placed in a built-in installation such as a bookcase unless proper ventilation is provided. 3. Plug the Receiver into a different wall outlet so that the Receiver is on a different branch circuit. 4. If necessary, the user should consult the dealer or an experienced radio/television technician for additional suggestions. The user may find the following booklet prepared by the Federal Communication Commission helpful: "How to Identify and Resolve TV Interference Problems." This booklet is available from the US Government Printing Office, Washington, D.C. 20402, Stock No. 004-000-00345-4. ACCESSORIES- Do not place video monitor or equipment on an unstable cart, stand or table. The video monitor or equipment may fall causing serious injury to a child or adult, and serious damage to the equipment. Wall or shelf mounting should follow the manufacturer's instruction, and should use a mounting kit approved by the manufacturer. 2. Relocate the Receiver away from the TV/radio receiver. Specifications over the camera. IMPORTANT! WARNING This equipment generates and uses radio frequency energy and if not installed and used properly, that is, in strict accordance with the manufacture's instructions, may cause interference to radio and television reception. It has been tested and found to comply with limits for a Class 8 digital device in accordance with Part 15 of FCC Rules and CE I-ETS 300 440, which are designed to provide reasonable protection against such interference in a residential installation. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: 1. Reorient the TV/radio antenna. OPERATING TEMP. 32°F -122°F O°C 50°C DIMENSIONS Approx. 12 x 8 x 4cm (LxWxH) WEIGHT Approx.157g Approx.165g J c::I Parts of the Camera Parts Included with This System - PIT Camera with Built-In Transmitter - 2.4 GHz AudioNideo Receiver - 7.5V 500mA Adapter for the Receiver - 7.5V 500mAAdapter for the Camera antenna -AN Cable low battery indicator power indicator channel switch (CH 1-4) Parts of Wireless Dual-Mode Color Camera Kit jack for AC adapter power on/off switch Parts of the Receiver eye ball camera lens IRLED camera on/off switch (camera kiUbaby monitor) microphone Volume LED Indicator antenna wall mount slot channel switch (CH1-4) power indicator AVoutput jack for AC adapter power on/off switch and volume dial low battery indicator battery compartment Installation belt clip Tools you will need: Pencil, Drill, Drill Bits, Phillips-head Screwdriver, Hammer battery compartment Installing Camera Mounting Bracket for wall mounting 1. Securely fasten one flat head wood screw on the wall. (For best results, use a 3/4-inch screw; mount in a solid wood panel, or use a screw anchor). 2. Leave the screw head protruding from the wall by at least 1/4-inch. 3. Fit the screw head salt (on the back of the unit) over the screw head and slide the unit down to seat it firmly. 4. To test that the unit is securely mounted, press on its edges. Attach Stand to Mounting Surface Troubleshooting Guide Installing Wireless Dual-Mode Color Camera Kit If the Camera and/or Receiver... To install the system, follow these steps: Receiver: 1. Plug the AC/DC adapter cord into the DC input jack on the back of the receiver. 2. Plug the audio/video cord to the anuio/video output jack of the receiver. Plug the other end of the cord to the audiolvideo input jacks on your 1V or monitor. 3. Plug the 7.5V ACIDC adapter into a standard (11 OV-240V) outlet. The power indicator LED located on the top of the receiver should light. Camera: 1. Plug the 7.5V ACIDC adapter cord into the DC input jack on the back of the camera. 2. Plug the adapter into a standard (110V-240V) AC outlet. System Setup: 1. Select the channel (ChanneI1-4) to be used on both the camera and receiver. NOTE: Make sure the camera and receiver are set to the same channel (1, 2, 3 or 4) and Camera should be turn on. 2. Set the selected channel by gently pushing the dip-switch for same channel on both the camera and the receiver. For example, to set both the camera and receiver on Channel 1: Push the Channel 1 dip-switch located on the Camera Set to side of the camera and the receiver to be in same channel. Channel 1 No Power No sound or picture. Distorted sound or 1. Check the channel switch settings on the camera and receiver. Make sure the channels match on both units. picture 2. Signal interference from a microwave oven. Check if a micro-wave oven is in use or located in the path between the camera and receiver. If so, turn it off or move it out of the path. 3. Signal interference from other slgnai producing devices. (a) Change the channel setting on both camera and receiver. (b) Identify and eliminate the source of the interference. (c) Relocate the transmitter and/or receiver closer to each other. 4. Camera and Receiver are too far apart. Relocate the Camera and/or Receiver. Receiver Set to Channel 1 5. Batteries are low in one or both units'-Please in one or both units. Additional Notice- When installing the camera, check the reception of the receiver before final installation. Have someone hold the camera in the area to be monitored and another person to check the reception with your TV or monitor. If interference or other problems occur, refer to the Troubleshooting Guide. 3. For the baby monitor feature, please make sure to turn off the camera on the transmitter unit. (A) Parent's Unit (Receiver) a. Install the two AA batteries or insert the AC adapter plug into the jack on the side of unit, then plug the adapter into an electrical outlet. (B) Child's Unit (Transmitter) a. Position the Child's Unit with approximately 6 feet of your child, yet out of the child's reach. b. Insert the AC adapter plug into the jack on the side of the unit, then plug the adaptor into an electrical outlet or install two AA batteries for battery operation. NOTE: For the Monitor to work properly, both units must be set to the same channel. 4. Turn the volume dial on the Parent's Unit clockwise to the desired loudness level. 5. Keep the Parent's Unit with you. For best reception keep both units as near upright as possible. 6. Using belt clip: Slide onto your belt or waistband. The belt clip has two slots; you can thread your belt through these slots for added security. 7. Changing channels: Always keep both units set to the same chanel (1,2,3 or 4). If clarity is not satisfactory channel, switch to the other. 8. Volume LED Indicator Lights: Here's how to interpret the lights on the Parent's Unit. 1} Three Quiet Sound Lights No Lights Lit No sound from Child's unit (Baby is quiet). One or More Lights Green (starting from 55 db) Quiet sounds (Baby may be whimpering or talking). 2} Two Loud Sound Lights One or More Lights Red (upto 75 db) - Loud 1. Check that the power cord(s) is properly connected. 2. Check that the camera and receiver are turned ON. 3. Batteries are dead. Please replace new batteries. ~'f You should... on one replace batteries 6. Out of Range. Move Receiver Unit closer to Camera Unit and be sure the power of Camera Unit is turned on. 7. Volume is set too low. Please raise volume setting. Noisy Feedback (high-pitched "screech") For Baby Monitoring System 1. Units too close together. Please make sure Receiver Unit is at least 3 feet from Camera Unit. 2. Volume too high. Please lower volume setting in Receiver Unit. 1 Year Limited Warranty: JSW Pacific Corp., the maker of Navigato. brand products, warrants that for a period of 1 year from the date of purchase, this product will be free from defects in material and workmanship. JSW, at its option, will repair or replace this product or any component of the product found to be defective during the warranty period. Replacement will be made with a new or remanufactured product or component. If the product is no longer available, replacement may be made with a similar product of equal or greater value. This is your exclusive warranty. This warranty is valid for the original purchaser from the date of initial purchase with JSW and is not transferable. This warranty does not cover nonnal wear of parts or damage resulting from any of the following: negligent use or misuse of the product, use on improper voltage or current, use contrary to the operating instructions, disassembly, repair or alteration by anyone other than JSW or an authorized service center. Further, the warranty does not cover acts of God, such as fire, flood, hurricanes and tornadoes or any batteries that are included with this unit. JSW shall not be liable for any incidental or consequential damages caused by the breach of any express or implied warranty. sounds (Baby may be crying or talking loudly).
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Modify Date : 2005:03:21 16:49:10+08:00 Create Date : 2004:12:01 15:54:25+08:00 Creator : HP PDF Formatter version 1.0.0.229 Page Count : 5 Mod Date : 2005:03:21 16:49:10+08:00 Creation Date : 2004:12:01 15:54:25+08:00 Producer : Adobe PDF Library 5.0 Metadata Date : 2005:03:21 16:49:10+08:00EXIF Metadata provided by EXIF.tools