JVC KENWOOD 701349 A/V Remote Control TX User Manual IOM701349A
JVC KENWOOD Corporation A/V Remote Control TX IOM701349A
Exhibit A Users Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 83806 |
| Application ID | AxwLbG70r+gIfa61whmhpg== |
| Document Description | Exhibit A Users Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 15.17kB (189582 bits) |
| Date Submitted | 2000-01-27 00:00:00 |
| Date Available | 2000-02-16 00:00:00 |
| Creation Date | 2000-01-18 14:31:36 |
| Producing Software | Acrobat PDFWriter 4.0 Windows |
| Document Lastmod | 2000-01-18 14:39:04 |
| Document Title | æ©¡IOM701349A.PDF |
| Document Creator | æ©¡Microsoft Word |
| Document Author: | æ©¡s872605 |
EXHIBIT A [FCC Ref. 2.1033(b)(3)] "Installation and Operating Instructions Furnished to the User" Kenwood/RC-R1110 FCC ID: IOM701349 EXHIBIT A VR-4900/VR-4700 KRF-V9993D B60-4502-00 00 CH (K, M, T, X) OC 9912 Chapter Four : Warnings and Specifications Chapter Four: Warnings and Specifications Read this page carefully to ensure safe operation. Warnings FCC WARNING This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made. Specifications 52 NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment may cause harmful interference to radio communications if it is not installed and used in accordance with the instructions. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and the receiver. • Connect the equipment into an outlet on a circuit different from the one that the receiver is connected to. • Consult the dealer or an experienced radio/TV technician for help. FCC Compliance Notice Audio-video Receiver, VR-4900 and VR-4700 These devices comply with Part 15 of FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. KENWOOD U.S.A. CORPORATION 2201 East Dominguez St., Long Beach, CA 90801-5745 Telephone: 310-639-9000 IC(Industry Canada) Notice Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. VR-4900 (for U.S.A. and Canada only) / KRF-V9993D (for U.K. only) Specifications Audio Section Rated Output Power during stereo operation 100 watts per channel minimum RMS, both channels driven, at 6 Ω from 20 Hz to 20 kHz with no more than 0.03% total harmonic distortion (FTC). Effective Output Power during surround operation Front 1 kHz, 0.06 % T.H.D. at 6 Ω, one channel driven .......................................................................... 130 W + 130 W Center 1 kHz, 0.06 % T.H.D. at 6 Ω, one channel driven ........ 130 W Surround 1 kHz, 0.06 % T.H.D. at 6 Ω, one channel driven .......................................................................... 130 W + 130 W Total Harmonic Distortion ............... 0.004 % (1 kHz, 50 W, 6 Ω) Frequency Response (IHF’78) CD1 ........................................... 5 Hz ~ 80 kHz, +0.5 dB, -3 dB Signal to Noise Ratio (IHF ‘66) Phono (MM) ................................................................... 77 dB CD1 ................................................................................... 90 dB Note to CATV System Installer: This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical. Input Sensitivity / Impedance Phono (MM) .................................................... 2.5 mV / 47 kΩ CD1 .................................................................. 200 mV / 47 kΩ NOTE: Do not use contact cleaning agents because they could cause a malfunction. Be especially careful not to use contact cleaning agents containing oil, since they may deform the plastic components. Loudness Control Volume at -40 dB level ......... +7 dB (100 Hz), +4 dB (10 kHz) Output Level / Impedance Tape Rec ........................................................... 200 mV / 220 Ω Pre Out (Front, Center, Surround, Subwoofer) ....... 1 V / 1 kΩ Tone Control Bass ............................................................. + 7 dB (at 100 Hz) Treble .......................................................... + 7 dB (at 10 kHz) Digital Audio Section Sampling Frequency ............................ 32 kHz, 44.1 kHz, 48 kHz Input Level / Impedance / Wavelength Optical ......................... -15 dBm ~ -21 dBm, 660 nm +30 nm Coaxial .............................................................. 0.5 Vp-p / 75 Ω
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : No Creator : .橡.Microsoft Word Create Date : 2000:01:18 14:31:36 Title : .橡.IOM701349A.PDF Author : .橡.s872605 Producer : Acrobat PDFWriter 4.0 Windows Modify Date : 2000:01:18 14:39:04+09:00 Page Count : 3EXIF Metadata provided by EXIF.tools