JVC GR D21EK+(Install) _001EN_SHEET_M3D1_EK Sheet User Manual D21EK (Install), D31EK (Install) LYT1135 001A
GR-D31EK+(Install) GR-D31EK (Install) LYT1135-001A glish,
User Manual: JVC GR-D21EK+(Install) GR-D21EK (Install), GR-D31EK (Install) glish,
Open the PDF directly: View PDF 
.
Page Count: 8
| Download | |
| Open PDF In Browser | View PDF |
Master Page: Sheet-Cov _001EN_SHEET_M3D1_EK-Sheet.fm Page 1 Wednesday, December 18, 2002 3:12 PM ENGLISH SOFTWARE INSTALLATION AND DV CONNECTION GUIDE LYT1135-001A COPYRIGHT © 2003 VICTOR COMPANY OF JAPAN, LTD. M3D1 EK Printed in Japan 1202-HO-ID-VP JVC SOFTWARE LICENSE AGREEMENT IMPORTANT TO CUSTOMERS: PLEASE MAKE SURE TO READ THIS CAREFULLY BEFORE INSTALLING OR USING THE SOFTWARE PROGRAM NAMED “DIGITAL PHOTO NAVIGATOR” (“Program”) ON YOUR PC. The right to use the Program is granted by Victor Company of Japan, Limited (“JVC”) to You only on the condition that You agree to the following. Should You not agree to the terms hereof, You may not install or use the Program. HOWEVER, INSTALLING OR USING THE PROGRAM INDICATES YOUR ACCEPTANCE OF THESE TERMS AND CONDITIONS. 1 COPYRIGHT; OWNERSHIP You acknowledge that all copyrights and other intellectual property rights in the Program are owned by JVC and its licensor, and remain vested in JVC and such licensor. The Program is protected under the copyright law of Japan and other countries, and related Conventions. 2 GRANT OF LICENSE (1) Subject to the conditions of this Agreement, JVC grants to You a non-exclusive right to use the Program. You may install and use the Program on a HDD or other storage devices incorporated in Your PC. (2) You may make one (1) copy of the Program solely for your personal backup or archival purposes. 3 RESTRICTION ON THE PROGRAM (1) You may not reverse engineer, decompile, disassemble, revise or modify the Program, except to the extent that expressly permitted by applicable law. (2) You may not copy or use the Program, in whole or in part, other than as expressly specified in this Agreement. (3) You have no right to grant a license to use the Program, and may not distribute, rent, lease or transfer the Program to any third party or otherwise let them use the Program. 4 LIMITED WARRANTY JVC warrants that any media in which the Program is embodied are free from any defects in materials and workmanship for a period of thirty (30) days from the date of Your purchasing any our products accompanying the Program. JVC’s entire liability and your exclusive remedy in connection with the Program shall be replacement of such defective media. EXCEPT FOR THE EXPRESS WARRANTIES STATED HEREIN AND TO THE EXTENT PERMITTED BY APPLICABLE LAW, JVC AND ITS LICENSORS DISCLAIM ANY OTHER WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE IN REGARD TO THE PROGRAM AND THE ACCOMPANYING PRINTED MATERIALS. SHOULD THERE BE ANY PROBLEM ARISING FROM OR CAUSED BY THE PROGRAM, YOU SHOULD SETTLE ALL SUCH PROBLEM AT YOUR OWN COST AND EXPENSE. —1— _001EN_SHEET_M3D1_EK-Sheet.fm Page 1 Master Page: Right _001EN_SHEET_M3D1_EK-Sheet.fm Page 2 Wednesday, December 18, 2002 3:12 PM 5 LIMITED LIABILITY TO THE EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL JVC AND ITS LICENSORS BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES WHATSOEVER, REGARDLESS OF THE FORM OF ACTION WHETHER IN CONTRACT, TORT OR OTHERWISE ARISING OUT OF OR IN CONNECTION WITH THE USE OF OR INABILITY TO USE THE PROGRAM, EVEN IF JVC HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. YOU WILL INDEMNIFY AND HOLD HARMLESS JVC FROM ANY LOSS, LIABILITY OR COST ARISING OUT OF OR IN ANY WAY CONNECTED TO CLAIMS FROM ANY THIRD PARTY RELATING TO THE USE OF THE PROGRAM. 6 TERM This Agreement will become effective on the date when You install and use the Program on Your machine, and continue to be in effect until the termination under the following provision. Should You breach any provision of this Agreement, JVC may terminate this Agreement without giving any notice to You. In this event, JVC may claim against You for any damages caused by Your breach. Should this Agreement be terminated, You must immediately destroy the Program stored in Your machine (including the erasing from any memory in Your PC), and no longer own such Program. 7 EXPORT CONTROL You agree that You will not ship, transfer or export the Program or underlying information and technology to any countries to which Japan and other relevant countries have initiated an embargo on such goods. 8 U.S. GOVERNMENT USER If You are an agency of the United States of America (the “Government”), You acknowledge JVC’s representation that the Program is a “Commercial Item” as defined in Federal Acquisition Regulation (FAR) part 2.101 (g) consisting unpublished “Commercial Computer Software” as those items are used at FAR part 12.212 and is only licensed to You with the same use rights JVC grants all commercial end users pursuant to the terms of this Agreement. 9 GENERAL (1) No modification, change, addition, deletion or other alternation of or to this Agreement will be valid unless reduced to writing and signed by an authorized representative of JVC. (2) If any part of this Agreement is held invalid by or in conflict with any law having jurisdiction over this Agreement, the remaining provisions will remain in full force and effect. (3) This Agreement shall be governed by and interpreted under the laws of Japan. The Tokyo District Court has jurisdiction over all disputes which may arise with respect to the execution, interpretation and performance of this Agreement. Victor Company of Japan, Limited Note: If You acquired the Program in Germany, the provisions of Sections 4 (Limited Warranty) and 5 (Limited Liability) provided above will be replaced with those of the German version of this Agreement. CAUTION: ● Operate this equipment according to the operating procedures described in this manual. ● Use only the provided CD-ROM. Never use any other CD-ROM to run this software. ● Do not attempt to modify this software. ● Changes or modifications not approved by JVC could void user’s authority to operate the equipment. How to handle a CD-ROM ● Take care not to soil or scratch the mirror surface (opposite to the printed surface). Do not write anything or put a sticker on either the front or back surface. If the CD-ROM gets dirty, gently wipe it with a soft cloth outward from the center hole using a circular motion. ● Do not use conventional disc cleaners or cleaning spray. ● Do not bend the CD-ROM or touch its mirror surface. ● Do not store your CD-ROM in a dusty, hot or humid environment. Keep it away from direct sunlight. ● You can find the latest information (in English) on the provided software program at our world wide web server at http://www.jvc-victor.co.jp/english/index-e.html —2— _001EN_SHEET_M3D1_EK-Sheet.fm Page 2 Master Page: Right _001EN_SHEET_M3D1_EK-Sheet.fm Page 3 Wednesday, December 18, 2002 4:53 PM Notice for Users Use of this software is authorized according to the terms of the software license. When contacting the nearest JVC office or agency in your country about this software (refer to the JVC Worldwide Service Network at http://www.jvc-victor.co.jp/english/worldmap/index-e.html), please fill out the following and have the appropriate information ready. Product Name Model Problem Error Message Manufacturer □ Desktop Model PC □ Laptop CPU OS Memory MB Available Hard Disk Space MB Please note that it may take some time to respond to your questions, depending on their subject matter. JVC cannot answer questions regarding basic operation of your PC, or questions regarding specifications or performance of the OS, other applications or drivers. Operating Environment The following requirements must be satisfied to use Digital Photo Navigator. Windows® OS : Windows® Millennium Edition (Me) (pre-installed), Windows® 2000 Professional (2000) (pre-installed), Windows® XP Home Edition (XP) (pre-installed), or Windows® XP Professional (XP) (pre-installed) CPU : Intel MMX® Pentium®, at least 200 MHz RAM : At least 64 MB recommended Free hard disk space : At least 10 MB for installation, at least 500 MB recommended Connector : IEEE1394 (i.LINK) connector Display : Must be capable of displaying 800 x 600 dots with 16-bit color Miscellaneous : Internet Explorer 5.5 or later —3— _001EN_SHEET_M3D1_EK-Sheet.fm CONTINUED ON NEXT PAGE Page 3 Master Page: Right _001EN_SHEET_M3D1_EK-Sheet.fm Page 4 Wednesday, December 18, 2002 3:12 PM 䡲 For ImageMixer with VCD In addition to the requirements on the previous page, the following requirements must be satisfied to use ImageMixer with VCD. OS : The same as requirements on the previous page. CPU : For capturing video via an IEEE1394 (DV) cable, Intel Pentium® III, at least 500 MHz, at least 800 MHz recommended Free hard disk space : At least 300 MB for installation, at least 1 GB recommended Connector : IEEE1394 (i.LINK) connector Miscellaneous : DirectX 8.0a or later ● The system requirements information above is not a guarantee that the provided software will work on all personal computers meeting those requirements. ● Microsoft® and Windows® are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. ● Other product and company names included in this instruction manual are trademarks and/or registered trademarks of their respective holders. —4— _001EN_SHEET_M3D1_EK-Sheet.fm Page 4 Master Page: Right _001EN_SHEET_M3D1_EK-Sheet.fm Page 5 Thursday, December 19, 2002 3:36 PM Software Installation (Windows®) Follow the procedure described below to install the software. From the [Setup] screen in step 2, you can install the following software. Quit any other software you are using. (Check that there are no other application icons on the status bar.) ImageMixer with VCD 1.1 This application is used to capture still images and video clips from a camcorder through an IEEE1394 (i.LINK) connector, and is also used to manage and edit the still images and video clips, and to create Video CDs. Digital Photo Navigator 1.0 This application is used to organise still images on your PC and convert them into a variety of formats. Adobe® Acrobat® Reader 5.0 This application is used to read PDF files. 1 Load the provided CD-ROM in the PC. After a moment, the [Setup] screen appears. From the [Setup] screen, you can install the desired software. 2 Click [Install] on the right side of the desired software and follow the on screen instructions to complete the installation. The installation of the selected software starts. The procedure differs depending on the software. The following is the example of Digital Photo Navigator on Windows® Me. [License Agreement] screen appears. Click [Yes]. Then, [Choose Destination Location] screen appears. Click [Next]. Next, [Select Program Folder] screen appears. —5— _001EN_SHEET_M3D1_EK-Sheet.fm CONTINUED ON NEXT PAGE Page 5 Master Page: Right _001EN_SHEET_M3D1_EK-Sheet.fm Page 6 Wednesday, December 18, 2002 3:12 PM Click [Next]. [Setup Status] screen appears. Wait for a moment until the installation is finished. When the installation is finished, [Digital Photo Navigator Setup] screen appears and asks you if you want to create the icon on the desktop. If you need it, click [Yes]. If not, click [No]. 3 When the message asking whether it is OK to restart the PC appears, click [Yes]. The PC restarts, and after a moment the [Setup] screen from step 1 appears. 4 Repeat steps 2 and 3 to install all of the desired software. Installing [ImageMixer with VCD 1.1] When the error message below appears while installing ImageMixer, click [OK] to complete installation. —6— _001EN_SHEET_M3D1_EK-Sheet.fm CONTINUED ON NEXT PAGE Page 6 Master Page: Right _001EN_SHEET_M3D1_EK-Sheet.fm Page 7 Wednesday, December 18, 2002 3:12 PM NOTES: ● The Digital Photo Navigator and ImageMixer with VCD instruction manual is included on the CD-ROM in PDF format. Double-click the [JVC] folder and then double-click the [Docs] folder. Open the “Instructions” file. Note that Adobe® Acrobat® Reader must be installed to read PDF files. ● When installing the [ImageMixer with VCD 1.1], select the desired language in the [Choose Setup Language] screen. ● If you perform installation of a software that is already installed, uninstallation will start. In this case, perform the installation again after uninstallation is finished. ● When you install ImageMixer with VCD 1.1 with Windows® 2000/XP, the [Microstaff WINASPI] screen appears. Click [Next] to continue installation. Connections (Windows®) Connecting the DV cable Connect the DV cable to use ImageMixer in capturing video. PC To IEEE1394 connector To DV connector Camcorder DV cable 1 To assure safety, make sure all units are turned off before making any connections. 2 Use the DV cable to connect the camcorder to the IEEE1394 connector on the PC. ● We recommend that you use the AC Adapter. NOTE: ● When the DV cable is connected, turning on or off the camcorder causes malfunctions of the PC. —7— _001EN_SHEET_M3D1_EK-Sheet.fm Page 7 Master Page: Right _001EN_SHEET_M3D1_EK-Sheet.fm Page 8 Wednesday, December 18, 2002 3:12 PM —8— _001EN_SHEET_M3D1_EK-Sheet.fm Page 8
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : Yes Encryption : Standard V1.2 (40-bit) User Access : Print, Fill forms, Extract, Assemble, Print high-res Modify Date : 2002:12:19 17:22:16+09:00 Create Date : 2002:12:03 22:26:50Z Subject : LYT1135-001A Page Count : 8 Creation Date : 2002:12:03 22:26:50Z Mod Date : 2002:12:19 17:05:07+09:00 Producer : Acrobat Distiller 5.0 (Windows) Author : idea Metadata Date : 2002:12:19 17:05:07+09:00 Creator : idea Title : _001EN_SHEET_M3D1_EK-Sheet.fm Page Mode : UseOutlines Page Layout : SinglePageEXIF Metadata provided by EXIF.tools