JVC KD R736BTU R736BT User Manual GET0778 001A

KD-R736BTU KD-R736BTU (Asia) GET0778-001A

User Manual: JVC KD-R736BTU KD-R736BTU Английский, Русский, Арабский, Персидский, Тайский,

Open the PDF directly: View PDF .
Page Count: 141

Download
Open PDF In Browser	View PDF

ENGLISH

CD RECEIVER

‫ ﮔﻴﺮﻧﺪﻩ ﺳﯽ ﺩﯼ‬/ CD ‫ﺭﺍﺩﻳﻮ ﻣﻊ ﻣﺸﻐﻞ‬

Instructions

KD-R736BT

.‫ ﻳﺮﺟﻰ ﻣﺮﺍﺟﻌﺔ ﻛﺘﻴﺐ ﺍﻟﺘﻌﻠﻴﻤﺎﺕ ﺍﻟﻤﻨﻔﺼﻞ‬،‫ﻟﻌﻤﻠﻴﺎﺕ ﺍﻟﺘﺮﻛﻴﺐ ﻭﺍﻟﺘﻮﺻﻴﻼﺕ‬
.‫ ﺑﻪ ﺩﻓﺘﺮﭼﻪ ﺭﺍﻫﻨﻤﺎﯼ ﻣﺮﺑﻮﻃﻪ ﺭﺟﻮﻉ ﺷﻮﺩ‬،‫ﺑﺮﺍﯼ ﻧﺼﺐ ﻭ ﻣﺘﺼﻞ ﮐﺮﺩﻥ‬

KD-R736BTU_Cover.indd 1

1111DTSSANJEIN

KD-R736BT
CD RECEIVER / РЕСИВЕР С ПРОИГРЫВАТЕЛЕМ
КОМПАКТ-ДИСКОВ / ϟΦυϙϧϏΩϟχΕλ CD

For installation and connections, refer to the separate manual.
Указания по установке и выполнению соединений приводятся в отдельной инструкции.
ΣυϚεϔζϛΦϛΕσϙϏιϗϧϠτΣηΕϔΩύϔΣ ϢλΣϔυηϖζηϓϨΩϠχϒΣϔυϟάϙϧϏσηΕϏ

KD-R736BT

K EN, RU, TH, AR, PE
© 2011 JVC KENWOOD Corporation

ไทย

For canceling the display demonstration, see page 4. /
Информацию об отмене демонстрации функций дисплея см. на стр. 4. /
ζϛιϗϧύλΖϔ 4 ϟπϙϧϏτΣϟχϖΣΣϔυόϔκϖηςϔπνυϒΣϏμ

/ .٤ ‫ ﺭﺍﺟﻊ ﺻﻔﺤﺔ‬،‫ﻹﻟﻐﺎء ﺍﺳﺘﻌﺮﺍﺽ ﺷﺎﺷﺔ ﺍﻟﻌﺮﺽ‬
.‫ ﻣﺮﺍﺟﻌﻪ ﻧﻤﺎﺋﻴﺪ‬۴ ‫ ﺑﻪ ﺻﻔﺤﻪ‬،‫ﺑﺮﺍﯼ ﻟﻐﻮ ﻧﻤﺎﻳﺸﮕﺮ‬

‫ﺩﻟﻴﻞ ﺍﻟﺘﻌﻠﻴﻤﺎﺕ‬
‫ﺩﺳﺘﻮﺭﺍﻟﻌﻤﻞ ﻫﺎ‬

РУCCKИЙ

INSTRUCTIONS
ИНСТРУКЦИИ ПО ЭКСПЛУАТАЦИИ

ΦϕϠλϒλϕ

GET0778-001A
[U]

11/20/2011 1:49:58 PM

Thank you for purchasing a JVC product.
Please read all instructions carefully before operation, to ensure your complete understanding and to
obtain the best possible performance from the unit.

IMPORTANT FOR LASER PRODUCTS
1. CLASS 1 LASER PRODUCT
2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit;
leave all servicing to qualified service personnel.
3. CAUTION: Visible and/or invisible class 1M laser radiation when open. Do not view
directly with optical instruments.
4. REPRODUCTION OF LABEL: CAUTION LABEL, PLACED OUTSIDE THE UNIT.

Warning:
[European Union only]

Stop the car before operating the unit.

Caution:
Adjust the volume so that you can hear sounds
outside the car. Driving with the volume too high
may cause an accident.
Avoid using the USB device or iPod/iPhone if it
might hinder driving safety.

Caution on volume setting:
Digital devices (CD/USB) produce very little noise
compared with other sources. Lower the volume
before playing these digital sources to avoid
damaging the speakers by the sudden increase of
the output level.

Temperature inside the car:
If you have parked the car for a long time in hot
or cold weather, wait until the temperature in the
car becomes normal before operating the unit.

Condensation:
When the car is air-conditioned, moisture may
collect on the laser lens. This may cause disc read
errors. In this case, remove the disc and wait for
the moisture to evaporate.

|‫ޓ‬ENGLISH

KD-R736BT_U_EN

2011/11/18‫ޓ‬19:25:31

How to attach/detach the
control panel

Contents
Preparation ............................................................ 4
Canceling the display demonstration
Setting the clock
Basic operations ................................................... 4
Radio ........................................................................ 6

How to reset your unit
Your preset adjustments will
also be erased.

CD/USB .................................................................... 8
iPod/iPhone ............................................................. 9
Quick Search ....................................................... 10
External components ...................................... 10
Bluetooth姞 connection ..................................... 11
Bluetooth mobile phone ................................ 13

How to forcibly eject a disc
(Hold)

Bluetooth audio player ................................... 17
Illumination color adjustments .................... 18
Brightness adjustments .................................. 19

Be careful not to drop the disc when it ejects.
If this does not work, reset your unit.

Sound adjustments .......................................... 19
Menu operations ............................................... 20

Maintenance
Cleaning the unit
Wipe off the dirt on the panel with a dry silicon or
soft cloth. Failure to observe this precaution may
result in damage to the unit.

Remote controller ............................................... 23
Additional information ................................... 23
Troubleshooting ................................................ 26
Specifications ..................................................... 28

Cleaning the connector
Wipe off dirt on the connector of the unit and
panel. Use a cotton swab or cloth.

How to read this manual:

This manual mainly explains operations using
the buttons on the control panel.
< > indicates the displays on the control
panel.
[XX] indicates the initial setting of a menu
item.

ENGLISH‫ |ޓ‬3
KD-R736BT_U_EN

2011/11/18‫ޓ‬19:25:31

Preparation
Preparation
Canceling the display
demonstration

Setting the clock
1

(Hold)

The display demonstration is always turned on
unless you cancel it.

2 Select .

(Hold)

2
3 Select .
(Initial setting)

3 Select .
4 Adjust the hour.
4 Press MENU to exit.
5 Adjust the minute.

6 Press MENU to exit.

Basic operations
Display information
Changes the display information. (Press)
Scrolls the current display information. (Hold)
Source

Station name*1 - Frequency - Clock - (back to the beginning)

CD/USB/Bluetooth Audio
iPod/iPhone (HEAD MODE/
IPOD MODE)

Album title/Artist* - Track title* - Track no./Playing time - Track
no./Clock - (back to the beginning)
* “NO NAME” appears for conventional CDs or if not recorded.

iPod/iPhone (APP MODE)

APP MODE) APP/Clock

External Components (AUX)

AUX IN) Clock

Display

Radio

“NO NAME” appears if no name is assigned to the station.

|‫ޓ‬ENGLISH

KD-R736BT_U_EN

2011/11/18‫ޓ‬19:25:31

Basic operations

Control panel

Remote controller

Control dial

Detaches the panel

Display window
Loading slot

Ejects the disc

AUX input jack
USB input terminal
Remote sensor
Aim the remote controller directly at the sensor.
DO NOT expose to bright sunlight.

When you press or hold the following button(s)...
Control panel

/SOURCE

Control dial
(turn)
Control dial
(press)

Remote
controller
—
SOURCE
VOL - / +
—

)
—

Number
buttons
(1 - 6)
EQ

—
SOUND
—

—

General function
Turns on.
Turns off. (Hold)
Press the /SOURCE button on the control panel and turn
the control dial within 2 seconds to select the source.
Press repeatedly to select the source.
Adjusts the volume level.
Selects items.
Mutes the sound or pauses playback.
Press the button again to cancel muting or resume
playback.
Confirms selection.
Selects the preset stations.
Stores the current station into the selected number button.
(Hold) (' page 6)
Selects the preset sound mode. (' page 19)
Enters “Hands-Free” menu (' page 14), or answers
incoming call when the unit rings.
Ends a call. (Hold)
Returns to the previous menu.
Selects a preset station. (' page 6)
Selects MP3/WMA folder. (' page 8)
Searches for a station automatically. (' page 6)
Searches for a station manually. (Hold)
Selects track. (' page 8, 9, 17)
Fast-forwards or reverses track. (Hold)

ENGLISH‫ |ޓ‬5
KD-R736BT_U_EN

2011/11/18‫ޓ‬19:25:31

Radio
Radio
Searching for a station
B A

Select or .
Auto search. (Press)
Manual search. (Hold)
“M” flashes, then press the button repeatedly.

“ST” lights up when receiving an FM stereo broadcast with sufficient signal strength.

Auto presetting (FM only)

Storing stations in memory
Manual presetting
You can preset up to 18 stations for FM and 6
stations for AM.

SSM (Strong-station Sequential Memory)
You can preset up to 18 stations for FM.

(Hold)

While listening to a station...

(Hold)
The preset number flashes and “MEMORY”
appears. The current station is stored to the
selected number button (1 - 6).
- - - - - - - - or - - - - - - - -

(Hold)

-
-
-
“SSM” flashes. When all the stations are stored,
“SSM” stops flashing.
To preset /,
repeat steps 1 and 2.

Selecting a preset station

“PRESET MODE” flashes.

2 Select preset number.
- - - - - - - - or - - - - - - - -

The preset number flashes and “MEMORY”
appears.

You can also select a preset station using / .

|‫ޓ‬ENGLISH

KD-R736BT_U_EN

2011/11/18‫ޓ‬19:25:31

Radio

Setting the Radio Timer
You can tune in to a preset station at a specific
time regardless of the current source.

(Hold)

[OFF]

Naming the stations
You can assign names for up to 30 station
frequencies (FM and AM) using a maximum of 8
characters for each name.

1 Select or .

-
-
-//

Cancels Radio Timer.

ONCE

Activates once.

DAILY

Activates daily.

2 Enter “Name Entry” menu.
(Hold)
(Hold)
3 Enter the desired name.
Move
Select

3 Select the preset station.
-/
-<01> ... <18> for FM/
<01> ... <06> for AM

4 Set the activation time.

5 Press MENU to exit.

lights up after the Radio Timer has been set.
Only one timer can be set. Setting a new timer
will override the previous setting.
The Radio Timer will not activate if the unit is
turned off or if is set to after
selecting an AM station for the timer.

Select the desired character (A to Z, 0 to 9, —, /, <,
>) or a space, then move to the next (or previous)
character position.
Repeat step 3 until you have finished entering the
name.

4 Press the control dial to confirm.

If you try to assign names to more than 30
station frequencies, “NAME FULL” appears.
Delete unwanted names before assignment.

To erase the entire name, press and hold DISP
after step 2, then press the control dial.

ENGLISH‫ |ޓ‬7
KD-R736BT_U_EN

2011/11/18‫ޓ‬19:25:31

CD/USB
CD/USB
Playing a CD/USB device
USB input terminal
USB 2.0 cable
(not supplied)

Label side

or
USB cable from the rear of the unit
The source changes to “CD” and playback starts.

The source changes to “USB” and playback starts.

This unit can play MP3/WMA files stored in CD-R, CD-RW, and MP3/WMA/WAV files in USB mass
storage device (such as a USB memory and Digital Audio Player).
Make sure all important data has been backed up. We shall bear no responsibility for any loss of data
in USB mass storage class device while using this system.
Ejected disc not removed within 15 seconds will reload automatically.
If the disc cannot be ejected, ' page 3.

Selecting a folder/track
Selects folder.
(For MP3/WMA/WAV)

Selecting the playback modes
You can select one of the following playback
modes at a time.

Selects track. (Press)
Fast-forwards or reverses
the track. (Hold)

Press 1 for REPEAT.
Press 2 for RANDOM.
Press again to exit.
- - - - - - - - or - - - - - - - -

(Hold)

Selecting a track/folder from
the list

)

2 Select a folder. (For MP3/WMA/WAV)

REPEAT
RPT OFF

3 Select a track.

Repeats current track.

FOLDER RPT *

Repeats current folder.

RANDOM
RND OFF

For MP3/WMA/WAV
If there are many folders or tracks, you can fast
search for the desired folder or track by turning
the control dial quickly, or use Quick Search
(' page 10).

Cancels repeat playback.

TRACK RPT

Cancels random playback.

FOLDER RND *

Randomly plays all tracks of
current folder, then tracks of
next folders.

ALL RND

Randomly plays all tracks.

* For MP3/WMA/WAV

|‫ޓ‬ENGLISH

KD-R736BT_U_EN

2011/11/18‫ޓ‬19:25:31

iPod/iPhone
Playing an iPod/iPhone

3 Select the desired track.

USB input terminal
USB 2.0 cable (accessory
of the iPod/iPhone)
or

Repeat this step until the desired track is selected.
If the selected menu contains many tracks, you
can fast search for the desired track by turning
the control dial quickly, or use Quick Search
(' page 10).

USB cable from the
rear of the unit
The source changes to “IPOD-FRONT/IPOD-REAR”
and playback starts.

Selecting the control mode
#//

HEAD
MODE
IPOD
MODE
APP
MODE

Controls iPod playback through this
unit.
Controls iPod playback from the
iPod/iPhone.
The sound of any functions (music,
games, applications, etc.) running on
the connected iPod/iPhone is
emitted through the speakers
connected to this unit.
You can also change the setting using in the menu. (' page 22)

Selecting the playback modes
Applicable under only.
You can select one of the following playback
modes at a time.
1
Press 1 for REPEAT.
Press 2 for RANDOM.
Press again to exit.
- - - - - - - - or - - - - - - - -

(Hold)
)

REPEAT
RPT OFF
ONE RPT

Selecting a track
Applicable under
only.
For , applicable only for some audio
applications.
Selects track/chapter. (Press)
Fast-forwards or reverses the
track. (Hold)

Selecting a track from the list
Applicable under only.

ALL RPT

Cancels repeat playback.
Functions the same as “Repeat
One” of the iPod.
Functions the same as “Repeat
All” of the iPod.

RANDOM
RND OFF
Cancels random playback.
Functions the same as “Shuffle
SONG RND
Songs” of the iPod.
Functions the same as “Shuffle
ALBUM RND
Albums” of the iPod.

“ALBUM RND” is not applicable for some iPod/
iPhone.

iPod/iPhone application
2 Select the desired list.

You can operate JVC original application with this
unit in . For more details, visit JVC
website: (English website only).

PLAYLISTS)ARTISTS)ALBUMS)SONGS)
PODCASTS)GENRES)COMPOSERS)
AUDIOBOOKS) (back to the beginning)

ENGLISH‫ |ޓ‬9
KD-R736BT_U_EN

2011/11/18‫ޓ‬19:25:31

Quick
Search
Quick Search
If you have many folders/tracks/contacts, you can search through them quickly according to the first
character (A to Z, 0 to 9 and OTHERS).

1 Enter list menu or “Hands-Free” menu.
CD (MP3/WMA)/
USB (MP3/WMA/WAV)

iPod/iPhone

Bluetooth phonebook

Select the desired list.

Select .

2 Select the desired character (A to Z, 0 to 9
and OTHERS).

“OTHERS” appears if the first character is not A to
Z or 0 to 9, such as #, -, !, etc.

3 Select your desired folder/track/contact.

For CD/USB and iPod/iPhone, repeat step 3 until
the desired track is selected.
Searching may not work on some of the layers
of the selected menu (for iPod/iPhone).

External components
You can connect an external component to the AUX (auxiliary) input jack on the control panel.
For details, refer also to the instructions supplied with the external components.
.

Playing an external component
from AUX
3.5 mm stereo mini plug
(not supplied)

1 Connect to AUX on the control panel.
2 Select .

3 Turn on the connected component and
start playing the source.

Portable audio player, etc.
Use a 3-terminal plug head
stereo mini plug for optimum
audio output.

10 |‫ޓ‬ENGLISH
KD-R736BT_U_EN

2011/11/18‫ޓ‬19:25:31

Bluetooth姞 connection

iPod/iPhone

By connecting the supplied KS-UBT1 USB Bluetooth Adapter and microphone to this unit, you can
operate a Bluetooth device using this unit. Refer to the “Installation/Connection Manual” for details on
connecting the microphone.
Once the USB Bluetooth Adapter is attached, this unit is always
available for pairing.
Refer also to the instructions supplied with the Bluetooth
device.
Refer to the separate appendix to check the countries where
Microphone
KS-UBT1
you may use the Bluetooth function.
If you turn off the unit, detach the control panel, or unplug the USB Bluetooth Adapter during a
phone call conversation, the Bluetooth connection is disconnected. Continue the conversation using
your mobile phone.
This unit supports the following Bluetooth profiles
Hands-Free Profile (HFP 1.5)
Object Push Profile (OPP 1.1)
Phonebook Access Profile (PBAP 1.0)
Advanced Audio Distribution Profile (A2DP 1.2)
Audio/Video Remote Control Profile (AVRCP 1.3)

Warning:
Stop the car in a safe place before operating complicated steps such as dialing numbers, using
phonebook, etc.

Pairing a Bluetooth device
When connecting a Bluetooth device to the unit for the first time, perform pairing between the unit and
the device.
Up to five Bluetooth devices can be registered in this unit.
A maximum of two Bluetooth phones and one Bluetooth audio device can be connected at any
time.
This unit supports Secure Simple Pairing (SSP).

1 Connect the USB Bluetooth adapter
(KS-UBT1) to one of the USB input
terminals.

USB input terminal
KS-UBT1
(supplied)
or
USB cable from the
rear of the unit

2 Search and select “JVC Unit” on the Bluetooth device.
“BT PAIRING” flashes on the display.
For some Bluetooth devices, you may need to enter the Personal Identification Number (PIN) code
immediately after searching.

ENGLISH‫ |ޓ‬11
KD-R736BT_U_EN

2011/11/18‫ޓ‬19:25:31

Bluetooth姞 connection
3 Perform (A) or (B) depending on what scrolls on the display.
For some Bluetooth devices, pairing sequence may vary from the steps described below
(A) If “[Device Name]”#“XXXXXX”#
(B) If “[Device Name]”#“VOL – YES”#
“BACK – NO” scrolls on the display,
“VOL – YES”#“BACK – NO” scrolls on the
display,
Select “YES” to start the pairing.
“XXXXXX” is a 6-digit passkey randomly
generated during each pairing.

Ensure that the passkey which appears
on the unit and Bluetooth device is the
same.
Select “YES” to confirm the passkey.

(1) If “PAIRING”#“PIN 0000” scrolls on the
display, enter the PIN code “0000” into the
Bluetooth device.

You can change to a desired PIN code before
pairing. (' page 22)

(2) If only “PAIRING” appears, operate the
Bluetooth device to confirm pairing.

Operate the Bluetooth device to confirm
the passkey.

After pairing is successful, “PAIRING COMPLETED” appears on the display.
The unit will establish a connection with the newly paired Bluetooth device, “” lights up on the
display and you can now control the Bluetooth device through the unit.

“” will light up when a phone is connected.
“” will light up when an audio device is connected.
Once the connection is established, the device is registered to the unit and there is no need to
perform the pairing again unless you delete the registered device.
Some Bluetooth devices may not be able to connect to the unit after pairing. Connect the device to
the unit manually. Refer to the instruction manual of the Bluetooth device for more information.

Connecting/Disconnecting a registered device manually
To connect
1

To disconnect
1

(Hold)

2 Select .
-
-/

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
Encryption                      : Standard V1.2 (40-bit)
User Access                     : Print, Fill forms, Extract, Assemble, Print high-res
Create Date                     : 2011:11:18 20:36:57+08:00
Subject                         : GET0778-001A
GTS PDFX Version                : PDF/X-1:2001
GTS PDFX Conformance            : PDF/X-1a:2001
Modify Date                     : 2011:11:24 08:31:25+08:00
Producer                        : Acrobat Distiller 7.0.5 (Windows)
Trapped                         : False
Creation Date                   : 2011:11:18 20:36:57+08:00
Mod Date                        : 2011:11:24 08:31:25+08:00
Author                          : JVC
Metadata Date                   : 2011:11:24 08:31:25+08:00
Creator Tool                    : Adobe Acrobat 7.0
Document ID                     : uuid:C719DCC2E111E1119B0AB526F5CBD2D7
Instance ID                     : uuid:7d9504aa-82a0-4c69-8087-eb7b93e2da27
Derived From                    : 
Format                          : application/pdf
Title                           : KD-R736BT
Description                     : GET0778-001A
Creator                         : JVC
Has XFA                         : No
Page Count                      : 141
Page Layout                     : SinglePage

EXIF Metadata provided by EXIF.tools

JVC KD R736BTU R736BT User Manual GET0778 001A

KD-R736BTU KD-R736BTU (Asia) GET0778-001A

Navigation menu

Versions of this User Manual:

Views

Navigation