JVC KD R80BTUN R80BT User Manual GET0800 004A

KD-R80BTUN KD-R80BTUN (Asia) GET0800-004A

User Manual: JVC KD-R80BTUN KD-R80BTUN English, Indonesian,

Open the PDF directly: View PDF PDF.
Page Count: 58

DownloadJVC KD-R80BTUN KD-R80BT User Manual GET0800-004A
Open PDF In BrowserView PDF
ENGLISH
INDONESIA

[TIPE]

KD-R80BT
[TAPE MOBIL]

CD RECEIVER / ALAT PENERIMA CD

For canceling the display demonstration, see page 4. /
Untuk membatalkan tampilan demonstrasi, lihat halaman 4.
For installation and connections, refer to the separate manual.
Untuk instalasi dan penyambungan, lihat buku pedoman terpisah.

INSTRUCTIONS
BUKU PETUNJUK
ʷʿʷʷƖʷʷʻ
ƾƿ

Thank you for purchasing a JVC product.
Please read all instructions carefully before operation, to ensure your complete understanding and to
obtain the best possible performance from the unit.

IMPORTANT FOR LASER PRODUCTS
1. CLASS 1 LASER PRODUCT
2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit;
leave all servicing to qualified service personnel.
3. CAUTION: Visible and/or invisible class 1M laser radiation when open. Do not view
directly with optical instruments.
4. REPRODUCTION OF LABEL: CAUTION LABEL, PLACED OUTSIDE THE UNIT.

Warning:
[European Union only]

Stop the car before operating the unit.

Caution:
Adjust the volume so that you can hear sounds
outside the car. Driving with the volume too high
may cause an accident.
Avoid using the USB device or iPod/iPhone if it
might hinder driving safety.

Caution on volume setting:
Digital devices (CD/USB) produce very little noise
compared with other sources. Lower the volume
before playing these digital sources to avoid
damaging the speakers by the sudden increase of
the output level.

Temperature inside the car:
If you have parked the car for a long time in hot
or cold weather, wait until the temperature in the
car becomes normal before operating the unit.
 appears on the display and animation/text
scroll will be stopped to prevent the display from
being blurred when the temperature falls below
0°C. Once operating temperature is normalised,
these functions will start working again.

Condensation:
When the car is air-conditioned, moisture may
collect on the laser lens. This may cause disc read
errors. In this case, remove the disc and wait for
the moisture to evaporate.

2

|‫ޓ‬ENGLISH

KD-R80BT_UN_EN

2012/2/6‫ޓ‬16:12:22

How to attach the control panel

Contents
Preparation ............................................................ 4
Canceling the display demonstration
Setting the clock
Basic operations ................................................... 4

How to detach the control panel
Avoid touching the connectors.

Radio ........................................................................ 6
CD/USB .................................................................... 8
iPod/iPhone ............................................................. 9
Quick Search ....................................................... 10
External components ...................................... 10
Bluetooth姞 connection ..................................... 11

How to reset your unit
Your preset adjustments will also
be erased.

Bluetooth mobile phone ................................ 13
Bluetooth audio player ................................... 17
Illumination color adjustments .................... 18
Brightness adjustments .................................. 19
Sound adjustments .......................................... 19
Menu operations ............................................... 20

How to forcibly eject a disc
(Hold)

Remote controller ............................................... 23
Additional information ................................... 23
Troubleshooting ................................................ 26




Be careful not to drop the disc when it ejects.
If this does not work, reset your unit.

Maintenance

Specifications ..................................................... 28

How to read this manual:


Cleaning the unit
Wipe off the dirt on the panel with a dry silicon or
soft cloth. Failure to observe this precaution may
result in damage to the unit.

Cleaning the connector




This manual mainly explains operations using
the buttons on the control panel.
< > indicates the displays on the control
panel.
[XX] indicates the initial setting of a menu
item.

Wipe off dirt on the connector of the unit and
panel. Use a cotton swab or cloth.

ENGLISH‫ |ޓ‬3
KD-R80BT_UN_EN

2012/2/6‫ޓ‬16:12:22

Preparation
Preparation
Canceling the display
demonstration

Setting the clock
1

The display demonstration is always turned on
unless you cancel it.

1

(Hold)

2

PUSH

DEMO

Clock

DEMO
PUSH

Clock
Color

3 Select .

On

(Initial setting)

Clock
Clock Display

3 Select .
DEMO
PUSH

DEMO

Clock

Clock

DEMO
Off
PUSH

SET UP

2 Select .

SET UP
PUSH

(Hold)

Off

PUSH

Set Clock
24/12H

4 Adjust the hour.

On

Set Clock

4 Press MENU to exit.

1 : 00AM

PUSH

(Initial setting)

5 Adjust the minute.
Set Clock
1 : 00AM

PUSH

6 Select <24H/12H>.
Clock
Set Clock
PUSH

24/12H

Clock Adjust

7 Select <24Hours> or <12Hours>.
8 Press MENU to exit.

Basic operations
Display information
Changes the display information. (Press)
Scrolls the current display information. (Hold)
Source
Radio
CD/USB/Bluetooth Audio
iPod/iPhone (Headunit Mode/iPod
Mode)
iPod/iPhone (Application Mode)
External Components (AUX)
*1

4

Display (Normal display pattern)*1
Station name/Frequency
Track title/Album title/Artist*
* “No Name” appears for conventional CDs or if not
recorded.
Application Mode
Aux In

Display information varies for large font and large clock display patterns.

|‫ޓ‬ENGLISH

KD-R80BT_UN_EN

2012/2/6‫ޓ‬16:12:22

Basic operations

Control panel

Remote controller
Display window

Flips down the panel

Remote sensor
Aim the remote controller directly at the sensor.
DO NOT expose to bright sunlight.

Control dial

When you press or hold the following button(s)...
Control panel

Remote
controller

General function

SOURCE

Turns on.
Turns off. (Hold)
 Press the /SOURCE button on the control panel and turn
the control dial within 2 seconds to select the source.
Press repeatedly to select the source.

Control dial
(turn)

VOL - / +

Adjusts the volume level.

Control dial
(press)

)

EQ

SOUND



/SOURCE

—

—

—



Selects items.
 Mutes the sound or pauses playback.
 Press the button again to cancel muting or resume
playback.
Confirms selection.
Selects the preset sound mode. (' page 19)
Enters “Hands-Free” menu (' page 14), or answers
incoming call when the unit rings.
 Ends a call. (Hold)
Returns to the previous menu.


—



—

/

/





/

/





Selects a preset station. (' page 6)
Selects MP3/WMA/WAV folder. (' page 8)
Searches for a station automatically. (' page 6)
Searches for a station manually. (Hold)
Selects track. (' page 8, 9, 17)
Fast-forwards or reverses track. (Hold)

ENGLISH‫ |ޓ‬5
KD-R80BT_UN_EN

2012/2/6‫ޓ‬16:12:22

Radio
Radio
Searching for a station
B A

ST DYNAMIC 1:00AM

FM

 Select  or .
 Auto search. (Press)
Manual search. (Hold)
“M” appears, then press the button repeatedly.

88.3 MHz

“ST” lights up when receiving an FM stereo broadcast with sufficient signal strength.

Auto presetting (FM only)

Storing stations in memory
Manual presetting
You can preset up to 18 stations for FM and 6
stations for AM.

SSM (Strong-station Sequential Memory)
You can preset up to 18 stations for FM.

1

(Hold)

While listening to a station...

1

(Hold)

“Preset Mode” screen appears.

2 Select preset number.

The preset number flashes.

2

-
-
-
“SSM” appears. When all the stations are stored,
“SSM” disappears.
To preset /,
repeat steps 1 and 2.

Selecting a preset station

You can also select a preset station using  / .

6

|‫ޓ‬ENGLISH

KD-R80BT_UN_EN

2012/2/6‫ޓ‬16:12:22

Radio

Setting the Radio Timer
You can tune in to a preset station at a specific
time regardless of the current source.

1

(Hold)

2

Naming the stations
You can assign names for up to 30 station
frequencies (FM and AM) using a maximum of 8
characters for each name.

1 Select  or .

[Off]

-
-
-//

Cancels Radio Timer.

Once

Activates once.

Daily

Activates daily.

3 Select the preset station.

2 Enter “Name Entry” menu.

(Hold)
(Hold)
3 Enter the desired name.
Move
Select

-/
-<1> ... <18> for FM/
<1> ... <6> for AM

4 Set the activation time.

5 Press MENU to exit.




lights up after the Radio Timer has been set.
Only one timer can be set. Setting a new timer
will override the previous setting.
The Radio Timer will not activate if the unit is
turned off or if  is set to  after
selecting an AM station for the timer.
(' page 22)

Select the desired character (A to Z, 0 to 9, —, /, <,
>) or a space, then move to the next (or previous)
character position.
Repeat step 3 until you have finished entering the
name.

4 Press the control dial to confirm.



If you try to assign names to more than 30
station frequencies, “Name Full” appears.
Delete unwanted names before assignment.

To erase the entire name, press and hold DISP
after step 2, then press the control dial.

ENGLISH‫ |ޓ‬7
KD-R80BT_UN_EN

2012/2/6‫ޓ‬16:12:22

CD/USB
CD/USB
Playing a CD/USB device
Label side
USB cable from the rear
of the unit
or
The source changes to “CD” and playback starts.





The source changes to “USB” and playback starts.

This unit can play MP3/WMA files stored in CD-R, CD-RW, and MP3/WMA/WAV files in USB mass
storage device (such as a USB memory and Digital Audio Player).
Make sure all important data has been backed up. We shall bear no responsibility for any loss of data
in USB mass storage class device while using this system.
Ejected disc not removed within 15 seconds will reload automatically.
If the disc cannot be ejected, ' page 3.

Selecting a folder/track
Selects folder.
(For MP3/WMA/WAV)

Selecting the playback modes
You can select one of the following playback
modes at a time.

1



Selects track. (Press)
Fast-forwards or reverses the
track. (Hold)

Selecting a track/folder from
the list
1
2 Select a folder. (For MP3/WMA/WAV)

(Hold)
)

2

Repeat  
Off

Cancels repeat playback.

Track

Repeats current track.

Folder *

Repeats current folder.

Random  
Off

Cancels random playback.

Folder *

Randomly plays all tracks of
current folder, then tracks of
next folders.

All

Randomly plays all tracks.

3 Select a track.

* For MP3/WMA/WAV


8

For MP3/WMA/WAV
If there are many folders or tracks, you can fast
search for the desired folder or track by turning
the control dial quickly, or use Quick Search
(' page 10).

|‫ޓ‬ENGLISH

KD-R80BT_UN_EN

2012/2/6‫ޓ‬16:12:22

iPod/iPhone
Playing an iPod/iPhone
USB cable from the rear
of the unit

or

2 Select the desired list.

Playlists)Artists)Albums)Songs)
Podcasts)Genres)Composers)
Audiobooks) (back to the beginning)

3 Select the desired track.

USB 2.0 cable (not supplied)*
The source changes to “iPod-1/iPod-2” and
playback starts.
* Recommend to use a cable suitable for car use.

Selecting the control mode
-/
/

Controls iPod playback through
this unit.
Controls iPod playback from the
iPod/iPhone.
The sound of any functions
(music, games, applications, etc.)
running on the connected iPod/
iPhone is emitted through the
speakers connected to this unit.

Repeat this step until the desired track is selected.
 If the selected menu contains many tracks, you
can fast search for the desired track by turning
the control dial quickly, or use Quick Search
(' page 10).

(Hold)
Headunit
Mode
iPod Mode
Application
Mode



You can also change the setting using  in the menu. (' page 22)

Selecting a track
Applicable under / only.
For , applicable only for
some audio applications.
 Selects track/chapter. (Press)
 Fast-forwards or reverses the
track. (Hold)

Selecting a track from the list
Applicable under  only.

1

Selecting the playback modes
Applicable under  only.
You can select one of the following playback
modes at a time.

1

(Hold)
)

2

Repeat  
Off
One
All

Cancels repeat playback.
Functions the same as “Repeat
One” of the iPod.
Functions the same as “Repeat
All” of the iPod.

Random  
Off
Cancels random playback.
Functions the same as “Shuffle
Song
Songs” of the iPod.
Functions the same as “Shuffle
Album
Albums” of the iPod.


“Album” is not applicable for some iPod/
iPhone.

iPod/iPhone application
You can operate JVC original application with this
unit in . For more details, visit
JVC website:  (English website only).
ENGLISH‫ |ޓ‬9

KD-R80BT_UN_EN

2012/2/6‫ޓ‬16:12:22

Quick
Search
Quick Search
If you have many folders/tracks/contacts, you can search through them quickly according to the first
character (A to Z, 0 to 9 and OTHERS).

1 Enter list menu or “Hands-Free” menu.
CD (MP3/WMA)/
USB (MP3/WMA/WAV)

iPod/iPhone

Bluetooth phonebook

Select the desired list.

Select .

2 Select the desired character (A to Z, 0 to 9
and OTHERS).

“OTHERS” appears if the first character is not A to
Z or 0 to 9, such as #, -, !, etc.

3 Select your desired folder/track/contact.

For CD/USB and iPod/iPhone, repeat step 3 until
the desired track is selected.
 Searching may not work on some of the layers
of the selected menu (for iPod/iPhone).

External components
You can connect an external component to the AUX (auxiliary) cable from the rear of the unit.
For details, refer also to the instructions supplied with the external components.
.

Playing an external component
from AUX
Portable audio
player, etc.

1 Connect to AUX cable from the rear of the
unit.
2 Select .

3 Turn on the connected component and
start playing the source.

AUX

3.5 mm stereo mini plug
(not supplied)
Use a 3-terminal plug head
stereo mini plug for optimum
audio output.

10 |‫ޓ‬ENGLISH
KD-R80BT_UN_EN

2012/2/6‫ޓ‬16:12:22

Bluetooth姞 connection

Bluetooth姞 connection

By connecting the supplied KS-UBT1 USB Bluetooth Adapter and microphone to this unit, you can
operate a Bluetooth device using this unit. Refer to the “Installation/Connection Manual” for details on
connecting the microphone.
Once the USB Bluetooth Adapter is attached, this unit is always
available for pairing.
 Refer also to the instructions supplied with the Bluetooth
device.
 Refer to the separate appendix to check the countries where
Microphone
KS-UBT1
you may use the Bluetooth function.
 If you turn off the unit, detach the control panel, or unplug the USB Bluetooth Adapter during a
phone call conversation, the Bluetooth connection is disconnected. Continue the conversation using
your mobile phone.
This unit supports the following Bluetooth profiles
 Hands-Free Profile (HFP 1.5)
 Object Push Profile (OPP 1.1)
 Phonebook Access Profile (PBAP 1.0)
 Advanced Audio Distribution Profile (A2DP 1.2)
 Audio/Video Remote Control Profile (AVRCP 1.3)

Warning:
Stop the car in a safe place before operating complicated steps such as dialing numbers, using
phonebook, etc.

Pairing a Bluetooth device
When connecting a Bluetooth device to the unit for the first time, perform pairing between the unit and
the device.
 Up to five Bluetooth devices can be registered in this unit.
 A maximum of two Bluetooth phones and one Bluetooth audio device can be connected at any
time.
 This unit supports Secure Simple Pairing (SSP).

1 Connect the USB Bluetooth adapter
(KS-UBT1) to one of the USB input
terminals.

USB cable from the
rear of the unit

or

KS-UBT1

2 Search and select “JVC Unit” on the Bluetooth device.


For some Bluetooth devices, you may need to enter the Personal Identification Number (PIN) code
immediately after searching.

ENGLISH‫ |ޓ‬11
KD-R80BT_UN_EN

2012/2/6‫ޓ‬16:12:22

Bluetooth姞 connection
3 Perform (A) or (B) depending on what appears on the display.
For some Bluetooth devices, pairing sequence may vary from the steps described below



(A)

Pairing?

Device: [Device name]
Passkey: XXXXXX


(B)

Pairing?
Yes: Press VOL
No: Press BACK

“XXXXXX” is a 6-digit passkey randomly
generated during each pairing.

 Ensure that the passkey which appears
on the unit and Bluetooth device is the
same.
 Select “Yes” to confirm the passkey.

Pairing?

Device: [Device name]

Pairing?
Yes: Press VOL
No: Press BACK

 (1) When the Bluetooth device prompts
you to key in a PIN or passcode, enter the
PIN code “0000” into the Bluetooth
device. The above should then appear on
the display.


You can change to a desired PIN code before
pairing. (' page 22)

(2) If only “Pairing” appears, operate the
Bluetooth device to confirm pairing.
 Operate the Bluetooth device to confirm
the passkey.

 Select “Yes” to confirm the pairing.

After pairing is successful, “Pairing COMPLETED” appears on the display.
The unit will establish a connection with the newly paired Bluetooth device and you can then control
the Bluetooth device through the unit.
 “” will light up when a phone is connected.
 “” will light up when an audio device is connected.



Once the connection is established, the device is registered to the unit and there is no need to
perform the pairing again unless you delete the registered device.
Some Bluetooth devices may not be able to connect to the unit after pairing. Connect the device to
the unit manually. Refer to the instruction manual of the Bluetooth device for more information.

Connecting/Disconnecting a registered device manually
To connect
1

To disconnect
1

(Hold)

2 Select .

(Hold)

2 Select .
-
-/

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
Encryption                      : Standard V1.2 (40-bit)
User Access                     : Print, Fill forms, Extract, Assemble, Print high-res
Create Date                     : 2012:02:06 17:30:05+08:00
Subject                         : GET0800-004A
GTS PDFX Version                : PDF/X-1:2001
GTS PDFX Conformance            : PDF/X-1a:2001
Modify Date                     : 2012:02:13 14:02:51+08:00
Producer                        : Acrobat Distiller 7.0.5 (Windows)
Trapped                         : False
Creation Date                   : 2012:02:06 17:30:05+08:00
Mod Date                        : 2012:02:13 14:02:51+08:00
Author                          : JVC
Metadata Date                   : 2012:02:13 14:02:51+08:00
Creator Tool                    : Adobe Acrobat 7.0
Document ID                     : uuid:D71F3E20A550E111A637D792A827C8E1
Instance ID                     : uuid:c6bb3ddc-cc94-44e4-b4bc-ec54900b938d
Derived From                    : 
Format                          : application/pdf
Title                           : KD-R80BT
Description                     : GET0800-004A
Creator                         : JVC
Page Count                      : 58
Page Layout                     : SinglePage
EXIF Metadata provided by EXIF.tools

Navigation menu