JVC KW AV50U AV50[U] User Manual LVT2288 001A
KW-AV50U KW-AV50U (Asia) LVT2288-001A
User Manual: JVC KW-AV50U KW-AV50U English, Traditional Chinese, Thai,
Open the PDF directly: View PDF 
.
Page Count: 183
ENGLISH
Instructions
Having TROUBLE with operation?
Please reset your unit
MONITOR WITH DVD RECEIVER
KW-AV50
MONITOR WITH DVD RECEIVER
Refer to page of How to reset your unit
For canceling the display demonstration, see page 8.
KW-AV50
For installation and connections, refer to the separate manual.
INSTRUCTIONS
EN, CT, TH
© 2011 JVC KENWOOD Corporation
Covers_AV50[U]001A.indb 2
LVT2288-001A
[U]
0911NSHMDWJEIN
11/08/03 15:12
Covers_AV50[U]001A.indb 2
11/09/23 9:22
ENGLISH
Thank you for purchasing a JVC product.
Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best
possible performance from the unit.
IMPORTANT FOR LASER PRODUCTS
1. CLASS 1 LASER PRODUCT
2. CAUTION: Do not open the
top cover. There are no user
serviceable parts inside the
unit; leave all servicing to
qualified service personnel.
3. CAUTION: Visible and/or invisible class 1M laser radiation when open. Do not view directly with optical
instruments.
4. REPRODUCTION OF LABEL: CAUTION LABEL, PLACED OUTSIDE THE UNIT.
WARNINGS: (To prevent accidents and damage)
• DO NOT install any unit or wire any cable in a location
where;
– it may obstruct the steering wheel and gearshift
lever operations.
– it may obstruct the operation of safety devices
such as air bags.
– it may obstruct visibility.
• DO NOT operate the unit while driving.
If you need to operate the unit while driving, be sure
to look around carefully.
• The driver must not watch the monitor while driving.
• The driver must not put on the headphones while
driving.
[European Union only]
2
EN_KW-AV50U.indb 2
11/09/14 10:30
Cautions on the monitor:
How to reset your unit
ENGLISH
• The monitor built in this unit has been produced with
high precision, but it may have some ineffective dots.
This is inevitable and is not considered defective.
• Do not expose the monitor to direct sunlight.
• Do not operate the touch panel using a ball-point
pen or similar tool with the sharp tip.
Touch the buttons on the touch panel with your
finger directly (if you are wearing a glove, take it off).
• When the temperature is very cold or very hot...
– Chemical changes occur inside, causing malfunction.
– Pictures may not appear clearly or may move
slowly. Pictures may not be synchronized with
the sound or picture quality may decline in such
environments.
• Your preset adjustments will also be erased (except the
registered Bluetooth devices).
How to forcibly eject a disc
+
(Hold)
For safety...
(Hold)
• Do not raise the volume level too much, as this will
make driving dangerous by blocking outside sounds,
and may cause hearing loss.
• Stop the car before performing any complicated
operations.
Temperature inside the car...
• Be careful not to drop the disc when it ejects.
• If this does not work, reset your unit. (☞ above)
If you have parked the car for a long time in hot or cold
weather, wait until the temperature in the car becomes
normal before operating the unit.
How to read this manual:
• This manual mainly explains operations using the buttons on the monitor panel and touch panel. For
operations using the remote controller (RM-RK252), ☞ page 50.
• < > indicates the variable screens/menus/operations/settings that appear on the touch panel.
• [ ] indicates the buttons on the touch panel.
• Indication language: English indications are used for the purpose of explanation. You can select the
indication language from the menu. (☞ page 45)
3
EN_KW-AV50U.indb 3
11/09/14 10:30
ENGLISH
Contents
How to reset your unit ........................................... 3
How to forcibly eject a disc .................................... 3
Sound adjustment ................................35
Using the sound equalization ............................. 35
Adjusting the cross over frequency ...................... 36
INTRODUCTIONS
Changing display design .......................37
Setting for video playback ....................39
Detaching/attaching the monitor panel...5
Component names and functions ............6
Initial Settings .......................................7
Canceling the display demonstration and
setting the clock ..............................8
Common operations .............................10
Picture adjustment ............................................. 39
Changing the aspect ratio ................................... 40
Zooming picture .................................................. 40
Using a rear view camera ......................41
Setting menu items ..............................42
Turning on the power ......................................... 10
Adjusting the volume ......................................... 10
Turning off the screen ......................................... 10
Turning on the AV source .................................... 11
Touch screen operation........................................ 11
Memorizing/recalling the settings ..................... 46
Adjusting the touch position ............................... 47
BLUETOOTH OPERATIONS
Operations on a Bluetooth device
(using JVC KS-BTA100, separately
purchased) ....................................48
Switching screens ................................12
AV SOURCE OPERATIONS
Using the Bluetooth audio player ....................... 48
Using the Bluetooth mobile phone ..................... 49
Selecting the playback source ...............13
Listening to the radio ...........................14
Disc operations.....................................19
REFERENCE
Using the remote controller ..................50
Playing a disc ...................................................... 19
Playable disc type................................................ 20
Playback operations ........................................... 21
Settings for disc playback ................................... 25
Operations using the remote controller
(RM-RK252) ........................................................ 50
Maintenance........................................53
More about this unit .............................54
Troubleshooting ...................................57
Specifications.......................................60
USB operations.....................................26
Playing a USB device ........................................... 26
Listening to the iPod/iPhone device ......28
Preparation ......................................................... 28
Setting iPod control mode ................................... 29
Selecting preference settings for iPod/iPhone
playback .............................................................. 29
iPod/iPhone playback operations ....................... 30
Selecting a track/video from menu on the iPod/
iPhone ................................................................ 31
Using other external components..........32
AV-IN ................................................................... 32
Front AUX ............................................................ 32
Using the external navigation unit ..................... 33
4
EN_KW-AV50U.indb 4
11/09/14 10:30
Detaching/attaching the monitor panel
Cautions
ENGLISH
INTRODUCTIONS
• Hold the monitor panel securely so as not to drop it accidentally.
• Fit the monitor panel onto the attaching plate until it is firmly locked.
Detaching
Attaching
Turn off the ignition switch before detaching the
monitor panel.
1
2
3
Soft case (supplied)
5
EN_KW-AV50U.indb 5
11/09/14 10:30
ENGLISH
Component names and functions
Screen (touch panel)
Monitor panel
1 Loading slot
2 0 (Eject) button
Ejects the disc.
3 MENU/DISP OFF button
• Displays screen. (Press)
(☞ page 12)
• Turns off/on the screen. (Hold) (☞ page 10)
4 SRC / button
• Selects the AV source. (Press) (☞ page 13)
• Turns off the AV source. (Hold)
5 VOLUME/ATT knob (☞ page 10)
• Attenuates the sound. (Press)
• Adjusts the audio volume. (Turn)
6 Remote sensor
7 Reset button
Resets the unit. (☞ page 3)
8 AUX input terminal
(Detach) button
9
Detaches the monitor panel. (☞ page 5)
Caution on volume setting:
Digital devices (CD/USB) produce very little noise
compared with other sources. Lower the volume
before playing these digital sources to avoid
damaging the speakers by sudden increase of the
output level.
You can change the color of the buttons on the
monitor panel. (☞ page 37)
6
EN_KW-AV50U.indb 6
11/09/14 10:30
3 Finish the procedure.
When you power on the unit for the first time or reset
the unit, the initial setting screen appears.
• You can also change the settings on the
screen. (☞ page 42)
ENGLISH
Initial Settings
1 Turn on the ignition switch.
The power is turned on, and the initial setting
screen appears.
2
is displayed.
• is selected initially. Select the
playback source. (☞ page 13)
Text
Language
Select the text language used
for on-screen information.
(☞ page 45)
Audio Input
Select the use of the LINE IN
jacks. (☞ page 44)
Video Input
Select the use of the VIDEO IN
jack. (☞ page 44)
Camera Input Select when
connecting the rear view
camera. (☞ page 44)
Display
Design
Select the background and
the colors of the text and the
monitor panel buttons. (☞
page 37)
7
EN_KW-AV50U.indb 7
11/09/14 10:30
ENGLISH
Canceling the display demonstration and setting the clock
Canceling the display
demonstration
Setting the clock
1 Display screen.
1 Display screen.
2 Display screen.
2 Display screen.
3
3
Select .
4 Finish the procedure.
8
EN_KW-AV50U.indb 8
11/09/14 10:30
4 Set the clock time.
ENGLISH
To set the clock manually
Sets the clock manually. (☞
right column)
Synchronizes the clock time
with Radio Data System.
1 Select the time display format
2 Adjust the hour
3 Adjust the minute
5 Finish the procedure.
9
EN_KW-AV50U.indb 9
11/09/14 10:30
ENGLISH
Common operations
Turning on the power
Turning off the screen
Turn on the ignition switch.
• The power is turned off when the ignition switch is
turned off.
(Hold)
Adjusting the volume
The screen is turned off.
To adjust the volume
• About the adjustable volume range, ☞ page 42
().
Decrease
• You can also turn off the screen on
screen.
Increase
• On the control screen, you can also adjust the
volume by moving your finger on the touch panel as
illustrated.
Decrease
Increase
To return to the screen
Touch the screen.
To attenuate the sound
The ATT indicator lights up.
To cancel the attenuation, press the volume
adjustment knob.
10
EN_KW-AV50U.indb 10
11/09/14 10:30
Turning on the AV source
Touch screen operation
ENGLISH
A Displays the video control menu while
playing a video.
You can activate the AV function by selecting source on
screen.
B Displays the operation buttons
while playing a video.
Goes to the previous
chapter/track.*
To turn off the AV source
Goes to the next
chapter/track.*
A Video control menu
(Hold)
or
B Source control screen for video playback
• The operation buttons disappear by touching the
screen or when no operation is done for about 10
seconds.
* Not available for video from an external component.
Dragging your finger to left or right functions in the
same way as touching.
11
EN_KW-AV50U.indb 11
11/09/14 10:30
ENGLISH
Switching screens
Source control screen
Common operating buttons
[
[TP]
• Changes the AV source.
• Displays the screen.
]
Displays the sound adjustment screen.
(☞ page 35)
Activates/deactivates TA standby reception
mode. (☞ page 17)
Changes the detailed settings. (☞ page 42)
Changes the page
☞ page 13
Select an item to display on the screen.
[AV]
Displays the source control screen.
(☞ above)
[Camera] Displays the picture from the rear view
camera. (☞ page 41)
[Off]
Turns off the screen. (☞ page 10)
• Press [
] to return to the previous screen.
• Press [ ] to display the current source control
screen.
12
EN_KW-AV50U.indb 12
11/09/14 10:30
ENGLISH
AV SOURCE OPERATIONS
Selecting the playback source
TUNER (☞ page 14)
Switches to the radio broadcast.
DISC (☞ page 19)
Plays a disc.
USB (☞ page 26)
Plays files on a USB device.
iPod (☞ page 28)
Plays an iPod/iPhone.
1
AV-IN* (☞ page 32)
Switches to an external component connected to LINE IN/VIDEO IN jacks
on the rear panel.
Bluetooth*2 (☞ page 48)
Operates a Bluetooth device.
Front AUX (☞ page 32)
Switches to an external component connected to AUX input terminal on
the monitor panel.
AV Off
Turns off the AV source.
1
* Select an appropriate input setting on