JVC KW M25BT User Manual Instruction B5A 3197 00B

User Manual: JVC KW-M25BT KW-M25BT Instruction manual

Open the PDF directly: View PDF .
Page Count: 32

Download
Open PDF In Browser	View PDF

KW-M25BT
MONITOR WITH RECEIVER

INSTRUCTION MANUAL

• Updated information (the latest Instruction Manual, etc.) is available from
.

Model name indication position
See “Removing the trim plate” (P.22)

Trim plate

© 2019 JVC KENWOOD Corporation

!B5A-3197-00_KWM.indb 1

B5A-3197-00b (E)

2019/06/11 16:42

Contents
Before use.....................................................................................2
How to read this manual........................................................................................2
Precautions.....................................................................................................................2

Getting Started...........................................................................3
Clock settings................................................................................................................4
Touch panel adjustment........................................................................................4

Basics..............................................................................................5
Functions of the Buttons on the Front Panel...........................................5
Common operations................................................................................................5
HOME screen descriptions...................................................................................6
Source control screen descriptions................................................................6
List screen........................................................................................................................6

USB..................................................................................................7
Preparation......................................................................................................................7
Playback operations..................................................................................................7

iPod/iPhone.................................................................................9
Preparation......................................................................................................................9
Playback operations..................................................................................................9

Mirroring.....................................................................................11
Preparation....................................................................................................................11
Mirroring operations..............................................................................................11

Tuner.............................................................................................12
Tuner Basic Operation.......................................................................................... 12
Presetting stations.................................................................................................. 12
FM RDS features........................................................................................................ 12
Tuner Setup.................................................................................................................. 13

External Components............................................................14
Using external audio/video players............................................................. 14
Rear view camera..................................................................................................... 14

Bluetooth smartphone..........................................................15
Register your smartphone to the unit....................................................... 15
Receive a phone call.............................................................................................. 15
Make a phone call.................................................................................................... 16
Playing Bluetooth Audio Device.....................................................................17
Delete the registered Bluetooth device....................................................17

Controlling Audio....................................................................18
Controlling General Audio................................................................................. 18
Equalizer Control...................................................................................................... 18
Subwoofer settings................................................................................................ 18

Remote control.........................................................................19
Functions of the Remote control Buttons............................................... 19

Installation................................................................................. 20
Before Installation....................................................................................................20
Installing the unit..................................................................................................... 21

About this Unit......................................................................... 25
More information.....................................................................................................25
Troubleshooting.......................................................................................................25
Copyrights....................................................................................................................26
Specifications.............................................................................................................28

How to read this manual

Before use
Precautions
#WARNING
ÑÑTo prevent injury or fire, take the
following precautions
• To prevent a short circuit, never put or leave any
metallic objects (such as coins or metal tools) inside
the unit.
• Do not watch or fix your eyes on the unit’s display
when you are driving for any extended period.
• If you experience problems during installation,
consult your JVC dealer.

ÑÑPrecautions on using this unit
• When you purchase optional accessories, check
with your JVC dealer to make sure that they work
with your model and in your area.
• The Radio Data System or Radio Broadcast Data
System feature won’t work where the service is not
supported by any broadcasting station.

ÑÑProtecting the monitor
• To protect the monitor from damage, do not
operate the monitor using a ballpoint pen or similar
tool with the sharp tip.

ÑÑCleaning the Unit
If the front panel of this unit is stained, wipe it with
a dry soft cloth such as a silicon cloth. If the front
panel is stained badly, wipe the stain off with a cloth
moistened with neutral cleaner, then wipe it again
with a clean soft dry cloth.

!!CAUTION
• Applaying spray cleaner directly to the unit may affect
its mechanical parts. Wiping the front panel with a
hard cloth or using a volatile liquid such as thinner
or alcohol may scratch the surface or erase screened
print.
ÑÑHow to reset your unit
If the unit or the connected unit fails to operate
properly, reset the unit.

Reset button

• The panels shown in this guide are examples used to
provide clear explanations of the operations. For this
reason, they may be different from the actual panels.
• In operation procedures, bracket shape indicates the
key or button you should control.
< >: indicates the name of panel buttons.
[ ]: indicates the name of touch keys.
2

!B5A-3197-00_KWM.indb 2

2019/06/11 16:42

Getting Started
1 Turn the ignition key of your car to ACC.
The unit is turned on.

2 Press the < > button.
3 Touch [Settings].

BT Auto Connection
The unit automatically reconnect when the last
connected Bluetooth device is within range.
“ON” (Default), “OFF”
Clock Setting
Adjust the clock time. (P.4).
Default
Touch [Default] to set all the settings to the initial
default settings.

5 Touch [6].

4 Touch the corresponding key and set the value.

Audio
Sound Effect
Displays the Equalizer screen. (P.18)
Beep
Activates or deactivates the key-touch tone.
“ON” (Default), “OFF”
Loudness
Sets the amounts of boost of low and high tones.
“ON”, “OFF” (Default)
Subwoofer
Displays the Subwoofer screen. (P.18)
Display
Panel Adjust
Adjust the sensing position of touch panel. See
“Touch panel adjustment” (P.4).
Aspect
Select the screen mode.
“16:9” (Default), “4:3 Pan Scan”
Tuner
Displays the Tuner Settings screen. (P.13)
General
Language
Select the language used for the control screen and
setting items. Default is “English”.
1) Touch [Language].
2) Select the desired language.
* You can change the page to display more items
by pressing [ ]/ [ ].
English |

3

Continued on the next page...
!B5A-3197-00_KWM.indb 3

2019/06/11 16:42

Getting Started
Clock settings
ÑÑSynchronizing the clock time with FM RDS
Activate [RDS Clock Sync]. See “Tuner Setup”
(P.13).

ÑÑAdjusting the clock manually

✎✎NOTE

• Deactivate [RDS Clock Sync] before adjusting the
clock. See “Tuner Setup” (P.13).

Touch panel adjustment
1 Press the < > button.
2 Touch [Settings].
3 Touch [Display].
4 Touch [Panel Adjust].
5 Follow the instruction on the screen and touch
the center of each +.

1 Press the < > button.
2 Touch [Settings].
3 Touch [General].
4 Touch [Clock Setting].
Clock screen appears.

5 Selects time format.
[12] / [24] (Default)

• To cancel the touch panel adjustment, touch
[Cancel].
• If the touch position is deviated, [OK] is not
displayed. Retry from the beginning.

6 Touch [OK].

6 Touch [R] or [S] to set the clock time.

• If you have selected [12] as the time format, touch
[AM] or [PM] before setting the clock time.

7 Touch [6].

4

!B5A-3197-00_KWM.indb 4

2019/06/11 16:42

Basics
Basics
Functions of the Buttons on the Front
Panel
1
2

Common operations
ÑÑTurning on the power

1 Press the <

> button.

3
4
5
6

1 Remote Sensor
• Receives the remote control signal.
2 (HOME)
• Displays the HOME screen. (P.6)
• Pressing for 1 second turns the power off.
• When the power off, turns the power on.
3 EQ
• Displays the Equalizer screen.* (P.18)
* During video file playback, you can set only the
preset equalizer curve.
* The Equalizer screen is not displayed during
picture file playback or on the list screen or
SETUP screen etc,
4 + , – (Volume)
• Adjusts volume. The volume will go up until 20
when you keep pressing [ + ].
(MUTE, Display off)
5
• Mutes/restores the sound.
• Pressing for 1 second turns the screen off.
When the screen is off, touch the display to turn
on the screen.
6 Reset
• If the unit or the connected unit fails to operate
properly, the unit returns to factory settings when
this button is pressed.

ÑÑTurning off the power

1 Press and hold the <

> button.

ÑÑAdjusting the volume

1 Press the <+> or <–> button.

✎✎NOTE

• The volume will go up until 20 when you keep
pressing [ + ].

ÑÑMutes the sound

1 Press the <

> button.

⿠To
⿠ restore the sound, touch the button again, or
adjust the volume.

ÑÑTurn off the screen

1 Press and hold the <

> button.

⿠To
⿠ turn on the screen, touch the display.

English |

5

Continued on the next page...
!B5A-3197-00_KWM.indb 5

2019/06/11 16:42

Basics
HOME screen descriptions
1 Press the <

Source control screen descriptions
You can perform source playback operations on the
source control screen.

> button.

1
5

2
3
HOME screen appears.

2

3

4
4

1
5

6

7

1 Clock display
Touch to displays the Clock screen.
2 Switches to the radio broadcast. (P.12)
3 [USB]
Plays files on a USB device. (P.7)
[iPod]
Plays an iPod/iPhone. (P.9)
• When iPod/iPhone is connected.
[Mirroring]
Displays the Mirroring screen.(P.11)
• When android device with “Mirroring OA for JVC”
application installed is connected.
4 Switches to an external component connected to
the AV-IN input terminal. (P.14)
5 Displays the Hands Free screen. (P.16)

1 Clock display
Touch to displays the Clock screen.
2 Source name
3 •

appears when the Bluetooth smartphone is
connected. *
•
appears when the Bluetooth audio player is
connected. *
•
appears when the mute function is active.
(P.5)
4 [DIM]
Select dimmer mode. Dim 1, Dim 2, Not dim
5 Returns to previous screen.

List screen
There are some common function keys in the list
screens of most sources.

6 Plays a Bluetooth audio player. (P.17)
7 Displays the SETUP screen. (P.3)

1 You can change the page to display more items
by pressing [

]/ [

].

6

Continued on the next page...
!B5A-3197-00_KWM.indb 6

2019/06/11 16:42

USB
USB
Preparation
ÑÑConnecting a USB device

1 Remove the cap of the USB terminal.
2 Connect the USB device with the USB cable.

Playback operations
ÑÑControl the music you are listening to on
the source control screen

6
1

The unit reads the device and playback starts.

ÑÑTo disconnect the USB device

1 Press the < > button.
2 Touch a source other than [USB].
3 Detach the USB device.
ÑÑUsable USB device
This unit can play MPEG1/ MPEG2/ MPEG4/ H.264/
MKV/ WMV/ MP3/WMA/ AAC/ WAV/ FLAC/ JPEG/ BMP/
PNG files stored in a USB mass storage class device.
(P.25)
• File system: FAT16/ FAT32
• This unit can recognize a total of 9 999 files and 320
folders (a maximum of 9 999 files per folder).
• The maximum number of characters:
––Folder names : 24 characters
––File names : 24 characters
––Tag : 30 characters

✎✎NOTE

• When the USB device is connected to this unit, it can
be charged through the USB cable.
• Install the USB device in the place where it will not
affect safe driving.
• You cannot connect a USB device via a USB hub and
Multi Card Reader.
• Take backups of the audio files used with this unit.
The files may be erased depending on the operating
conditions of the USB device.
We shall have no compensation for any damage
arising from any erased data.
• No USB device comes with this unit. You need to
purchase a commercially available USB device.
• Cap the USB terminal whenever not using.

5
4

2
3

1 The jacket of the currently playing file is displayed.
2 ##:##:## : Song time
Play time bar : For confirmation of current playing
position
3 [L] : Plays or pauses.
[E] [F] : Searches the previous/next content.
Touch and hold to fast forward or fast backward.
Touch [L] to resumes normal play.
[ ] : Selects Repeat playback mode.
Lights off (Default): Repeats all files in the USB
device.
: Repeats the current file.
FO : Repeats all files in the current folder.
[ ] : Selects Random playback mode.
: Randomly plays all files.
Lights off (Default): Normal playback.
4 Displays the information of the current file.
Only a file name is displayed if there is no tag
information.
5 Searches file. (P.8)
6 D, etc. : Playback status
: Repeat playback mode indicator
: Random playback mode indicator

English |

d on the next page...

7

Continued on the next page...
!B5A-3197-00_KWM.indb 7

2019/06/11 16:42

USB
ÑÑPlaying videos and pictures

ÑÑSelecting a track in a list (Searches file)

1 When the operation buttons are not displayed on

1 Touch [
].
2 Select whether you search by audio files [

the screen, touch the display.

1

5

video files [

] or picture files [

],

].

4
2
2
3
1 D, etc. : Playback status
: Repeat playback mode indicator
: Random playback mode indicator
##:##:## : Song time (Video file only)
Play time bar : For confirmation of current playing
position (Video file only)
2 To switch the operation buttons.

3 Touch [Y] to moves to the upper hierarchy.
4 Touch the desired folder.

3 [

] : You can adjust image quality in video screen.
[Brightness]: Adjusts the brightness. (00 to 12)
[Contrast]: Adjusts the contrast. (00 to 12)
[Tint]: Adjusts the tint. (00 to 12)
[Color]: Adjusts the color. (00 to 12)
[Reset]: To clear the adjustment.
[ ] : Select the zoom ratio.
“Off”, “x2”, “x3”, “x4”, “x5”, “1/2”, “1/3”, “1/4”
[3] [2] [ < ] [ > ] : Scrolls the screen.
4 The operation buttons disappear when 4 is
touched or when no operation is done for about
10 seconds.
5 Displays the File List screen.* (P.8)
* Stops the currently playing file.

When you touch a folder its contents are displayed.

5 Touch desired item from the content list.
Playback starts.

✎✎NOTE

• When file types are switched, the Random/Repeat
playback setting is cancelled.

8

!B5A-3197-00_KWM.indb 8

2019/06/11 16:42

iPod/iPhone
iPod/iPhone
Preparation

Playback operations

ÑÑConnecting iPod/iPhone
• For Lightning connector models: Use USB
Audio cable for iPod/iPhone—KS-U62 (optional
accessory).
• For details about connecting iPod/iPhone, see page
24 .

1 Remove the cap of the USB terminal.
2 Connect the iPod/iPhone.

The unit reads the device and playback starts.

ÑÑTo disconnect the iPod/iPhone

1 Press the < > button.
2 Touch a source other than [iPod].
3 Detach the iPod/iPhone.
ÑÑConnectable iPod/iPhone
The following models can be connected to this unit.
Made for
iPhone XS Max
iPhone XS
iPhone XR
iPhone X
iPhone 8 Plus
iPhone 8
iPhone 7 Plus
iPhone 7

✎✎NOTE

iPhone SE
iPhone 6s Plus
iPhone 6s
iPhone 6 Plus
iPhone 6
iPhone 5s

• If you start playback after connecting the iPod, the
music that has been played by the iPod is played first.
• Cap the USB terminal whenever not using.

ÑÑControl the music you are listening to on
the source control screen

6
1

5
4

2
3
1 Artwork (Shown if the track contains artwork)

2 ##:##:## : Song time
Play time bar : For confirmation of current playing
position
3 [L] : Plays or pauses.
[E] [F] : Searches the previous/next content.
Touch and hold to fast forward or fast backward.
[ ] : Selects Repeat playback mode.
Lights off: Repeat off
: Functions the same as Repeat All.
1 : Functions the same as Repeat One.
[ ] : Selects Random playback mode.
: Functions the same as Shuffle Songs.
Lights off: Random off
4 Displays the information of the current file.
5 Searches content. (P.10)
6 D, etc. : Playback status
: Repeat playback mode indicator
: Random playback mode indicator

English |

9

Continued on the next page...
!B5A-3197-00_KWM.indb 9

2019/06/11 16:42

iPod/iPhone
ÑÑSelecting a content in a list

1 Touch [
].
2 Touch desired item.

When you touch a category its contents are
displayed.

3 Touch desired item from the content list.

Playback starts.
• Touch [6] to moves to the upper hierarchy.

✎✎NOTE

• The source control screen appears when you touch
[6] at the top hierarchy.

10

!B5A-3197-00_KWM.indb 10

2019/06/11 16:42

Mirroring
Mirroring
Preparation
Pair your smartphone with the unit via Bluetooth.
See Register your smartphone to the unit (P.15)
and Connect the Bluetooth device.

Mirroring operations
ÑÑMirroring Operation

1 Touch [Mirroring].

ÑÑCompatible Android smartphone
• Android version 7.0 or later
• Bluetooth support

✎✎NOTE
• This unit may not work for some Android smartphone’s.

ÑÑConnecting Android smartphone
• For details about connecting Android smartphone,
see page 24 .

1 Download Mirroring App from Google Play.
Install the latest version of the Mirroring application
“Mirroring OA for JVC” on your Android.

2 Remove the cap of the USB terminal.
3 Connect the Android smartphone.
4 Launch Mirroring App on your Android
Smartphone.
Touch “OK” to start Mirroring App.
Touch “Start now” to start capturing your Android
screen.

• You can display the same screen of the Android
device on the monitor of the unit.

ÑÑTo turn off the Mirroring

1 Press the <

> button.

• HOME screen appears.

5 Start to enjoy Mirroring.
ÑÑTo disconnect the Android smartphone

1 Press the <8MENU> button.
2 Touch a source other than [Mirroring].
3 Detach the Android smartphone.

English |

11

Continued on the next page...
!B5A-3197-00_KWM.indb 11

2019/06/11 16:42

Tuner
ÑÑManual memory

Tuner Basic Operation

You can store the current receiving station in
memory.

1 Press the < > button.
2 Touch [Tuner].

1 Tune in to a station you want to preset.
2 Touch and hold [#] (#:1-6) in which you want to

ÑÑSource control screen

1

store the station.

5

2
3

4

1 Displays the information of the current station:
PS name, Frequency, PTY Genre, Indicator Items
[<<] [>>] : Touch to the next frequency manually.
2 Recalls the memorized station.
When touched for 2 seconds, stores the current
receiving station in memory.
3 [E] [F] : Tunes in a station with good
reception automatically. *1
[TA] : Sets the traffic information mode.
“ON”, “OFF” (Default) *2 (P.12)
[PTY] : Select the available Program Type. *2 (P.12)
*1 If “AF” is set to ON on the Tuner screen, only RDS
stations are received. (P.13)
*2 FM only
4 [1] : Presets stations automatically. (P.12)
5 [FM] : Switches the FM band.
“FM1”, “FM2”, “FM3”
[AM] : Switches the AM band.
“AM1”, “AM2”

Presetting stations
ÑÑStoring stations in the memory
You can preset 18 stations for FM and 12 stations for
AM.

ÑÑRecalling the preset station

1 Touch [#] (#:1-6).
✎✎NOTE

• Only frequencies are registered as preset stations.
Information about RDS stations is not registered.

FM RDS features
ÑÑSearch by program type

1 Touch [PTY].
2 Select a program type from the list.

PTY Search starts.

ÑÑTraffic Information

1 Touch [TA].

Switches to the traffic information automatically
when the traffic bulletin starts. (TA indicator lights
up.)
“ON”, “OFF” (Default)
• If “AF” is set to “ON” on the Tuner screen, the station is
switched to the RDS station. (P.13)
When the traffic bulletin starts
The Traffic Information screen appears automatically.

1 Touch [FM] or [AM] to select the band.
2 Touch [1].

The local stations with the strongest signals are
found and stored automatically.
• If “AF” is set to “ON” on the Tuner screen, only RDS
stations are stored in the memory. (P.13)

12

!B5A-3197-00_KWM.indb 12

2019/06/11 16:42

Tuner
Tuner Setup
ÑÑFunction menu

1 Press the < > button.
2 Touch [Settings].

AF
When station reception is poor, automatically switches
to the station that is broadcasting the same program
over the same Radio Data System network.
“ON” (Default), “OFF”

5 Touch [6].

3 Touch [Tuner].

4 Set each item as follows.

Stereo
Determines whether to receive stereo broadcasts
in the stereo mode or monaural mode (the MONO
indicator lights up).
“ON” (Default), “OFF”
Local
Tunes in only to the stations with sufficient signal
strength. (LOC indicator lights up.)
“ON”, “OFF” (Default)
RDS Clock Sync
Synchronizing the Radio Data System station time
data and this unit’s clock.
“ON” (Default), “OFF”

English |

13

Continued on the next page...
!B5A-3197-00_KWM.indb 13

2019/06/11 16:42

External Components

External Components

Using external audio/video players
ÑÑStarting playback

1 Connect an external component to the AV-IN
input terminal. (P.23)

2 Press the < > button.
3 Touch [AV-IN].
4 Turn on the connected component and start

Rear view camera
To use a rear view camera, the REVERSE lead
connection is required. For connecting a rear view
camera. (P.23)

ÑÑDisplaying the picture from the rear view
camera
The rear view screen is displayed when you shift the
gear to the reverse (R) position.

playing the source.

ÑÑFor Video playback

1 When the operation buttons are not displayed on
the screen, touch the display.

• To erase the caution message, touch the screen.

1

The operation buttons disappear when 1 is
touched or when no operation is done for about 5
seconds.

✎✎NOTE

• When the picture from the rear view camera is
displayed on the AV-IN screen, the picture output
from the Visual Output terminal disappears.

14

!B5A-3197-00_KWM.indb 14

2019/06/11 16:42

Bluetooth smartphone
Bluetooth
smartphone
ÑÑAbout the Bluetooth smartphone and
Bluetooth audio player
This unit conforms to the following Bluetooth
specifications:
Version
Bluetooth Ver.2.1 + EDR
Profile
Smartphone/ Cell-phone:
HFP (V1.6) (Hands Free Profile)
PBAP (V1.1.1) (Phonebook Access Profile)
Audio player:
A2DP (V1.2) (Advanced Audio Distribution Profile)
AVRCP (V1.3) (Audio/Video Remote Control Profile)
Sound codec
SBC

ÑÑDisconnecting the device
• Turn off the Bluetooth function from your
smartphone/cell-phone.
• Turn off the ignition switch.

Receive a phone call
1 Touch [Û].

• [Ý] : Reject an incoming call.

ÑÑOperations during a call
ÑÑAbout mobile phones compatible with
Phone book Access Profile (PBAP)
If your mobile phone supports PBAP, you can display
the following items on the touch panel screen when
the mobile phone is connected.
• Phone book (up to 1000 entries)
• Dialed calls, received calls, and missed calls (up to 20
entries in total)

Register your smartphone to the unit
You can use your Bluetooth smartphone when paired
to this unit.
You can register up to 5 Bluetooth devices.
• You can pair the device and the unit using SSP (Secure
Simple Pairing) which only requires confirmation.
• One device can be connected at a time.
• When you register a new Bluetooth device, disconnect
the Bluetooth device currently connected and then
register the new device.
• A new device cannot be registered if there are 5
registered Bluetooth units. Delete unnecessary
registration. (P.17)

[Ý]

Ending a call
You can send tones by touching desired keys
on the screen.
• Touch [
] to close the window.
Switches the speaking voice output between
cell-phone and speaker.

⿠Adjust
⿠
the receiver volume
Press the <+> or <–> button.

1 Turn on the Bluetooth function on your
smartphone/cell-phone.

2

Search the unit from your smartphone/cell-phone.
If a PIN code is required, enter the PIN code (“0000”).
•
appears when the Bluetooth smartphone is
connected.
•
appears when the Bluetooth audio player is
connected.

English |

15

Continued on the next page...
!B5A-3197-00_KWM.indb 15

2019/06/11 16:42

Bluetooth smartphone
Make a phone call
1 Press the < > button.
2 Touch [Phone].
3 See the table below for each operation method.

• [
• [

] : Disconnects the Bluetooth smartphone.
] : Closes the screen for sending tones while
talking.
• [
] : Displays the screen for deleting the
previously registered Bluetooth devices.
(P.17)
Call by entering a phone number
1) Touch [
].
2) Enter a phone number with number keys.
3) Touch [Û].
Make a call
• Touch [W] to delete the last entry.

Call using the phonebook
1) Touch [
].
2) Select the name from the list.

Make a call
• [
] : Updates the phonebook. Touch this
button after you have made a change to
the phonebook of your cell-phone.
Call by voice
You can make a voice call using the voice recognition
function of the Bluetooth smartphone.
1) Touch [
].
2) Touch [
].
3) Say the name registered in the Bluetooth
smartphone.

Call using call records
1) Touch [
] (Incoming Calls), [
] (Outgoing
Calls), [
] (Missed Calls).
2) Select the phone number from the list.

• Touch [

] to cancel voice dialing.

Make a call

16

!B5A-3197-00_KWM.indb 16

2019/06/11 16:42

Bluetooth smartphone
Playing Bluetooth Audio Device

Delete the registered Bluetooth
device

1 Press the < > button.
2 Touch [BT Audio].
ÑÑSource control screen

3

1 Press the < > button.
2 Touch [Phone].
3 Touch [
].
4 Touch the device name.

2

1
1 [L] : Plays or pauses.
[E] [F] : Searches the previous/next content.
2 Displays the information of the current file.
Only a file name and a folder name are displayed if
there is no tag information.
3 D, etc. : Playback status
: Repeat playback mode indicator *
: Random playback mode indicator *
* The settings on the Bluetooth audio device are
displayed.

5 Touch [

].

✎✎NOTE

• Operations and display indications may differ
according to their availability on the connected
device.

English |

17

Continued on the next page...
!B5A-3197-00_KWM.indb 17

2019/06/11 16:42

Controlling Audio

Controlling Audio

Controlling General Audio

Equalizer Control

1 Press the < > button.
2 Touch [Settings].
3 Touch [Audio].
4 Touch [Sound Effect].
5 Touch [
].
6 Set each item as follows.

1 Press the < > button.
2 Touch [Settings].
3 Touch [Audio].
4 Touch [Sound Effect].
5 Set each item as follows.

1
2

Adjust the front and rear volume balance.
] 12 (front) to -12 (rear)
Balance Adjust the left and right volume balance.
[ ] [ ] 12 (right) to -12 (left)
Fader
[ ][

[Reset]

3

1 You can select frequency bar and adjust its level.
(-7 to +7)
• The adjustments are stored and “User” is activated.
2 To recall the preset equalizer curve.
3 The “User” preset and the current EQ curve returns
to flat.

To clear the adjustment.

ÑÑLoudness

1 Press the < > button.
2 Touch [Settings].
3 Touch [Audio].
4 Touch [Loudness].

Sets the amounts of boost of low and high tones.
“ON”, “OFF” (Default)

Subwoofer settings
1 Press the < > button.
2 Touch [Settings].
3 Touch [Audio].
4 Touch [Subwoofer].
5 Set each item as follows.

Low Pass Filter adjustment. /
Frequency
[80Hz], [120Hz], [OFF]: Turns off the subwoofer
output. (Default OFF)
[160Hz], [OFF]
Adjusts the subwoofer level. 0 to 12
Volume
(Default 6)
[–], [+]

18

!B5A-3197-00_KWM.indb 18

2019/06/11 16:42

Remote control
Remote
control
This unit can be operated using the remote control.
The remote control RM-RK258 (optional accessory)
can be used.

!!WARNING
• Do not ingest the battery, Chemical Burn Hazard
The remote control supplied with this product
contains a coin / button cell battery. If the coin/button
cell battery is swallowed, it can cause severe internal
burns in just 2 hours and can lead to death.
Keep new and used batteries away from children.
If the battery compartment does not close securely,
stop using the product and keep it away from
children.
If you think batteries might have been swallowed or
placed inside any part of the body, seek immediate
medical attention.
!!CAUTION
• Put the remote control in a place where it will
not move during braking or other operations. A
dangerous situation could result, if the remote control
falls down and gets wedged under the pedals while
driving.
• Do not leave the battery near fire or under direct
sunlight. A fire, explosion or excessive heat generation
may result.
• Do not recharge, short, break up or heat the battery
or place it in an open fire. Such actions may cause the
battery to leak fluid. If spilled fluid comes in contact
with your eyes or on clothing, immediately rinse with
water and consult a physician.
ÑÑRemoving the battery sheet
Pull the battery sheet out from the remote controller
to activate the battery.

ÑÑChanging the battery of the remote
controller

Functions of the Remote control
Buttons
• Aim the remote control directly at the remote sensor
on the faceplate.
• DO NOT expose the remote sensor to bright light
(direct sunlight or artificial lighting).

SRC

Switches to the source to be played.

VOL + –

Adjusts the volume.

ATT

Mutes/restores the sound

DISP

Not used.

FM/R
AM/S

ANGLE

Selects the folder to be played.
During tuner source, select FM/ AM band
to be received.
Selects the track or file to be played.
During tuner source, switches to broadcast
stations received by the unit.
Not used.

Û

When a call comes in, answers the call.

DIRECT

Not used.

ASPECT

Not used.

Numeric
Keypad

Not used.

CLR

Clears the telephone number input on the
Phone screen.
Not used.

E 2
F 3

ENT

CR2025 (+side)
• Use a commercially available button battery (CR2025).
• Insert the battery with the + and – poles aligned
properly.
––If the effectiveness of the remote controller
decreases, replace the battery.
English |

19

Continued on the next page...
!B5A-3197-00_KWM.indb 19

2019/06/11 16:42

Installation
Installation

Before Installation
Before installation of this unit, please note the
following precautions.
#WARNINGS
• If you connect the ignition wire (red) and the battery
wire (yellow) to the car chassis (ground), you may
cause a short circuit, that in turn may start a fire.
Always connect those wires to the power source
running through the fuse box.
• Do not cut out the fuse from the ignition wire (red)
and the battery wire (yellow). The power supply must
be connected to the wires via the fuse.
#CAUTION
• Install this unit in the console of your vehicle.
Do not touch the metal part of this unit during and
shortly after the use of the unit. Metal part such as the
heat sink and enclosure become hot.

✎✎NOTE

• Mounting and wiring this product requires skills and
experience. For best safety, leave the mounting and
wiring work to professionals.
• Make sure to ground the unit to a negative 12V DC
power supply.
• Do not install the unit in a spot exposed to direct
sunlight or excessive heat or humidity. Also avoid
places with too much dust or the possibility of water
splashing.
• Do not use your own screws. Use only the screws
provided. If you use the wrong screws, you could
damage the unit.
• If the power is not turned ON (“There is an error in
the speaker wiring. Please check the connections.” is
displayed), the speaker wire may have a short-circuit or
touched the chassis of the vehicle and the protection
function may have been activated. Therefore, the
speaker wire should be checked.
• If your car’s ignition does not have an ACC position,
connect the ignition wires to a power source that
can be turned on and off with the ignition key. If you
connect the ignition wire to a power source with a
constant voltage supply, such as with battery wires,
the battery may be drained.
• If the console has a lid, make sure to install the unit so
that the front panel will not hit the lid when closing
and opening.
• If the fuse blows, first make sure the wires aren’t
touching to cause a short circuit, then replace the old
fuse with one with the same rating.
• Insulate unconnected wires with vinyl tape or other
similar material. To prevent a short circuit, do not
remove the caps on the ends of the unconnected
wires or the terminals.

• Secure the wires with cable clamps and wrap vinyl
tape around the wires that comes into contact with
metal parts to protect the wires and to prevent short
circuit.
• Connect the speaker wires correctly to the terminals
to which they correspond. The unit may be damaged
or fail to work if you share the ¤ wires or ground
them to any metal part in the car.
• When only two speakers are being connected to
the system, connect the connectors either to both
the front output terminals or to both the rear output
terminals (do not mix front and rear). For example,
if you connect the ¢ connector of the left speaker
to a front output terminal, do not connect the ¤
connector to a rear output terminal.
• After the unit is installed, check whether the brake
lamps, blinkers, wipers, etc. on the car are working
properly.
• Mount the unit so that the mounting angle is 30° or
less.
• Do not press hard on the panel surface when installing
the unit to the vehicle. Otherwise scars, damage, or
failure may result.
• Reception may drop if there are metal objects near
the Bluetooth antenna.

Bluetooth antenna unit

ÑÑSupplied accessories for installation
1

2
x2

x1
4

3
x1
5

(3 m)
x1

(2 m)
x1

20

!B5A-3197-00_KWM.indb 20

2019/06/11 16:42

Installation
ÑÑInstallation procedure
1) To prevent a short circuit, remove the key from
the ignition and disconnect the ¤ terminal of the
battery.
2) Make the proper input and output wire connections
for each unit.
3) Connect the wire on the wiring harness.
4) Take Connector B on the wiring harness and connect
it to the speaker connector in your vehicle.
5) Take Connector A on the wiring harness and connect
it to the external power connector on your vehicle.
6) Connect the wiring harness connector to the unit.
7) Install the unit in your car.
8) Reconnect the ¤ terminal of the battery.
9) Press the reset button.

Installing the unit
ÑÑNon-Japanese cars

ÑÑTrim plate
1) Attach accessory 1 to the unit.

1

ÑÑMicrophone unit
1) Check the installation position of the microphone
(accessory 4).
2) Clean the installation surface.
3) Remove the separator of the microphone (accessory
4), and stick the microphone to the place shown
below.
4) Wire the microphone cable up to the unit with it
secured at several positions using tape or other
desired method.
5) Adjust the direction of the microphone (accessory 4)
to the driver.

Bend the tabs of the
mounting sleeve with
a screwdriver or similar
utensil and attach it in
place.

4

✎✎NOTE

• Make sure that the unit is installed securely in place. If
the unit is unstable, it may malfunction (eg, the sound
may skip).
Fix a cable with a commercial item of tape.

✎✎NOTE

• Swap the clips if necessary.

English |

21

Continued on the next page...
!B5A-3197-00_KWM.indb 21

2019/06/11 16:42

Installation
ÑÑRemoving the trim plate

ÑÑRemoving the unit

1) Use the extraction key (accessory 3) to lever out the
four tabs (two on the left part, two on the right part).

1) Remove the trim plate by referring to step 1 in
“Removing the trim plate”.
2) Insert the extraction key (accessory 2) deeply into
the slot as shown. (The protrusion at the tip of the
extraction key must face toward the unit.)

3

2) Pull the trim plate forward.
2
3) With the inserted extraction key secured, insert the
other extraction key into the slot.

2
4) Pull out the unit halfway.

✎✎NOTE

• Be careful to avoid injury from the catch pins on the
extraction key.
5) Pull the unit all the way out with your hands, being
careful not to drop it.

22

!B5A-3197-00_KWM.indb 22

2019/06/11 16:42

Installation
ÑÑConnecting wires to terminals
Light Green
(Parking sensor wire)
Accessory 5 Extension cable

USB device[2]

PARKING
BRAKE

USB terminal[1] (0.8 m)
5V=1A

Cap
Accessory 4:
Bluetooth Microphone

For best safety, be
sure to connect the
parking sensor.

Connect to the
vehicle’s parking
brake detection
switch harness.

MIC

REVERSE
GEAR
SIGNAL

Purple/White
(Reverse sensor wire)
Connect to vehicle’s reverse lamp harness
when using the optional rear view camera.

Subwoofer Preout

SUB
WOOFER

Light Blue/Yellow
(Steering remote control wire)
To steering remote
To use the steering wheel remote control
feature, you need an exclusive remote
adapter (not supplied) matched to your car.
STEERING
WHEEL
REMOTE
CONTROL

Cap

Connector B
Connector A

1 3 5 7
2 4 6 8

AV-IN

REAR

L

L

FRONT

L

R

R

R

V

CAM

VOUT

FM/AM antenna input

15A

1 3 5 7
2 4 6 8

FM/AM antenna
ANT

Fuse (15A)

AV-IN audio input
(Left; White, Right; Red)
Rear Audio Preout
(Left; White, Right; Red)

ISO Connector

Front Audio Preout
(Left; White, Right; Red)

ÑÑWiring harness connector function guide
Pin
Color and function
A-4
Yellow
Battery
A-5
Blue/White[3]
Power Control
A-7
Red
Ignition (ACC)
A-8
Black
Earth (Ground) Connection
B-1/ B-2 Purple (+) / Purple/Black (–)
Rear Right
B-3/ B-4 Gray (+) / Gray/Black (–)
Front Right
B-5/ B-6 White (+) / White/Black (–)
Front Left
B-7/ B-8 Green (+) / Green/Black (–)
Rear Left
• Speaker Impedance: 4-8 Ω

Visual Output (Yellow)
Rear view camera input (Yellow)
AV-IN visual input (Yellow)
 SB maximum power supply current : DC 5 V = 1 A
U
Sold separately
[3]
Max. 300mA, 12V
[1]

[2]

!!CAUTION
Before you connect the commercially available ISO
connectors to the unit, check the following condition:
• Make sure that the pin assignment of the connector
matches with the JVC unit.
• Take extra notice of the power wire.
• In case battery wire and ignition wire are not
corresponding then change them accordingly.
• In case the car does not have an ignition wire, use a
commercially available interface.
English |

23

Continued on the next page...
!B5A-3197-00_KWM.indb 23

2019/06/11 16:42

Installation
ÑÑConnecting an iPod/iPhone

ÑÑConnecting an Android smartphone

iPod/iPhone[2]
Lightning connector
KS-U62 (0.8m)

[3]

Android smartphone[2]
Micro USB to USB cable

USB terminal[1] (0.8 m)

USB terminal[1] (0.8 m)

5V=1A

5V=1A

Cap

Cap

AV-IN

REAR

FRONT

AV-IN

REAR

L

L

L

L

L

L

R

R

R

R

R

R

V

CAM

VOUT

V

CAM

VOUT

15A

15A

ANT

iPod/iPhone maximum power supply current :
DC 5 V = 1 A
[2]
Sold separately
[3]
Optional accessory
[1]

FRONT

ANT

 ndroid maximum power supply current :
A
DC 5 V = 1 A
[2]
Sold separately
[1]

24

Not used
!B5A-3197-00_KWM.indb 24

2019/06/11 16:42

About
this Unit
About this Unit
More information

Troubleshooting

ÑÑPlayable Audio files
Audio
format
MP3 (.mp3)

Bit rate

16 – 320kbps,
VBR
WMA (.wma) 16 – 320kbps
AAC-LC (.m4a) 16 – 320kbps
WAV (.wav)
–
FLAC (.flac)
–

Sampling frequency
16 – 48 kHz
16 – 48 kHz
16 – 48 kHz
16 – 192 kHz
16 – 192 kHz

• This unit can show ID3 Tag Version 1.0/1.1/2.2/2.3/2.4
(for MP3).
• The maximum number of characters:
––Tag : 30 characters

✎✎NOTE

• WMA and AAC of which is covered with DRM cannot
be played.
• Although the audio files are complied with the
standards listed above, the play may be impossible
depending on the types or conditions of media or
device.

ÑÑAcceptable Video files
Video
format
MPEG-1
(.mpg, .mpeg)
MPEG-2
(.mpg, .mpeg)
MPEG-4
(.mp4, .avi)
H.264
(.mp4, mkv,
avi, .flv, .f4v)
MKV (.mkv)
WMV (.wmv)

What appears to be trouble is not always serious.
Check the following points before calling a service
center.
• For operations with the external components, refer
also to the instructions supplied with the adapters
used for the connections (as well as the instructions
supplied with the external components).

ÑÑGeneral
No sound comes out of the speakers.
• Adjust the volume to the optimum level.
• Check the cords and connections.
The unit does not work at all.
• Reset the unit. (P.2)
The remote controller does not work.
• Replace the battery.

ÑÑUSB
While playing a track, sound is sometimes
interrupted.
• The tracks are not properly copied into the USB device.
Copy the tracks again, and try again.

Video codec

Audio codec

ÑÑiPod/iPhone

MPEG-1

No sound comes out of the speakers.
• Disconnect the iPod/iPhone, then connect it again.
• Select another source, then reselect “iPod”.

MPEG-4

MPEG Audio
Layer 2
MPEG Audio
Layer 2
MP3, AAC-LC (2ch)

H.264

MP3, AAC

MPEG-2

H.264 / MPEG-4 AVC, MP3, AAC, WMA,
MPEG4, WMV (VC1) Vorbis, FLAC
WMV (VC1)
WMA

ÑÑAcceptable Picture files
• JPEG (.jpg)
32 x 32 to 16,241 x 15,225 (JPEG) or 5,847 x 5,481
(Progressive JPEG)
––It may take time to display the file.
––Lossless JPEG files cannot be played.
• BMP (.bmp)
32 x 32 to 9,873 x 9,873 resolution
––It may take time to display the file.
• PNG (.png)
32 x 32 to 8,192 x 7,680
––It may take time to display the file.

The iPod/iPhone does not turn on or does not
work.
• Check the connecting cable and its connection.
• Update the firmware version of iPod/iPhone.
• Charge the battery of iPod/iPhone.
• Reset the iPod/iPhone.
Sound is distorted.
• Deactivate the equalizer either on this unit or the
iPod/iPhone.
A lot of noise is generated.
• Turn off (uncheck) “VoiceOver” on the iPod/iPhone.
For details, visit .

ÑÑTuner
Automatic presetting does not work.
• Store stations manually. (P.12)
Static noise while listening to the radio.
• Connect the antenna firmly.

English |

25

Continued on the next page...
!B5A-3197-00_KWM.indb 25

2019/06/11 16:42

About this Unit
ÑÑAV-IN

Copyrights

No picture appears on the screen.
• Turn on the video component if it is not on.
• Connect the video component correctly.

• The Bluetooth word mark and logos are registered trademarks
owned by the Bluetooth SIG, Inc. and any use of such marks by
JVC KENWOOD Corporation is under license. Other trademarks
and trade names are those of their respective owners.
• Use of the Made for Apple badge means that an accessory has
been designed to connect specifically to the Apple product(s)
identified in the badge, and has been certified by the
developer to meet Apple performance standards. Apple is not
responsible for the operation of this device or its compliance
with safety and regulatory standards. Please note that the use
of this accessory with an Apple product may affect wireless
performance.
• Apple, iPhone, iPod, and Lightning are trademarks of Apple
Inc., registered in the U.S. and other countries.
• The “AAC” logo is a trademark of Dolby Laboratories.
• Microsoft and Windows Media are either registered
trademarks or trademarks of Microsoft Corporation in the
United States and/or other countries.
• Android is a trademark of Google LLC.
• THIS PRODUCT IS LICENSED UNDER THE MPEG-4 VISUAL
PATENT PORTFOLIO LICENSE FOR THE PERSONAL AND
NON-COMMERCIAL USE OF A CONSUMER FOR (¡) ENCODING
VIDEO IN COMPLIANCE WITH THE MPEG-4 VISUAL STANDARD
(“MPEG-4 VIDEO”) AND/OR (¡¡) DECODING MPEG-4 VIDEO THAT
WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL
AND NON-COMMERCIAL ACTIVITY AND/OR WAS OBTAINED
FROM A VIDEO PROVIDER LICENSED BY MPEG LA TO PROVIDE
MPEG-4 VIDEO. NO LICENSE IS GRANTED OR SHALL BE
IMPLIED FOR ANY OTHER USE. ADDITIONAL INFORMATION
INCLUDING THAT RELATING TO PROMOTIONAL, INTERNAL
AND COMMERCIAL USES AND LICENSING MAY BE OBTAINED
FROM MPEG LA, LLC. SEE HTTP://WWW.MPEGLA.COM
• THIS PRODUCT IS LICENSED UNDER THE MPEG-4 VISUAL
PATENT PORTFOLIO LICENSE FOR THE PERSONAL AND
NON-COMMERCIAL USE OF A CONSUMER FOR (¡) ENCODING
VIDEO IN COMPLIANCE WITH THE MPEG-4 VISUAL STANDARD
(“MPEG-4 VIDEO”) AND/OR (¡¡) DECODING MPEG-4 VIDEO THAT
WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL
AND NON-COMMERCIAL ACTIVITY AND/OR WAS OBTAINED
FROM A VIDEO PROVIDER LICENSED BY MPEG LA TO PROVIDE
MPEG-4 VIDEO. NO LICENSE IS GRANTED OR SHALL BE
IMPLIED FOR ANY OTHER USE. ADDITIONAL INFORMATION
INCLUDING THAT RELATING TO PROMOTIONAL, INTERNAL
AND COMMERCIAL USES AND LICENSING MAY BE OBTAINED
FROM MPEG LA, LLC. SEE HTTP://WWW.MPEGLA.COM
• THIS PRODUCT IS LICENSED UNDER THE VC-1 PATENT
PORTFOLIO LICENSE FOR THE PERSONAL AND NONCOMMERCIAL USE OF A CONSUMER TO ( i ) ENCODE VIDEO
IN COMPLIANCE WITH THE VC-1 STANDARD (“VC-1 VIDEO”)
AND/OR ( ii ) DECODE VC-1 VIDEO THAT WAS ENCODED
BY A CONSUMER ENGAGED IN A PERSONAL AND NONCOMMERCIAL ACTIVITY AND/OR WAS OBTAINED FROM A
VIDEO PROVIDER LICENSED TO PROVIDE VC-1 VIDEO. NO
LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER
USE. ADDITIONAL INFORMATION MAY BE OBTAINED FROM
MPEG LA, L.L.C. SEE HTTP://WWW.MPEGLA.COM

ÑÑBluetooth
Phone sound quality is poor.
• Reduce the distance between the unit and the
Bluetooth mobile phone.
• Move the car to a place where you can get a better
signal reception.
The sound is interrupted or skipped while using a
Bluetooth audio player.
• Reduce the distance between the unit and the
Bluetooth audio player.
• Turn off, then turn on the unit. (When the sound is not
yet restored) connect the player again.
The connected audio player cannot be controlled.
• Check whether the connected audio player supports
AVRCP (Audio/Video Remote Control Profile).
The Bluetooth device does not detect the unit.
• Search from the Bluetooth device again.
The unit does not pair with the Bluetooth device.
• Turn off, then turn on the Bluetooth device.
• Disconnect the Bluetooth device currently connected
and then register the new device. (P.15)

26

!B5A-3197-00_KWM.indb 26

2019/06/11 16:42

About this Unit
• libFLAC
Copyright (C) 2000-2009 Josh Coalson
Copyright (C) 2011-2013 Xiph.Org Foundation
Redistribution and use in source and binary forms, with
or without modification, are permitted provided that the
following conditions are met:
–– Redistributions of source code must retain the above
copyright notice, this list of conditions and the following
disclaimer.
–– Redistributions in binary form must reproduce the above
copyright notice, this list of conditions and the following
disclaimer in the documentation and/or other materials
provided with the distribution.
–– Neither the name of the Xiph.org Foundation nor the
names of its contributors may be used to endorse or
promote products derived from this software without
specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS
AND CONTRIBUTORS ``AS IS’’ AND ANY EXPRESS OR IMPLIED
WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT
SHALL THE FOUNDATION OR CONTRIBUTORS BE LIABLE FOR
ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY,
OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY
WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
OF THE POSSIBILITY OF SUCH DAMAGE.

English |

27

Continued on the next page...
!B5A-3197-00_KWM.indb 27

2019/06/11 16:42

About this Unit
Specifications
ÑÑMonitor section
Picture Size
: 6.75 inches (diagonal) wide
: 151.8 mm (W) × 79.7 mm (H)
Display System
: Transparent TN LCD panel
Drive System
: TFT active matrix system
Number of Pixels
: 1,152,000 (800H x 480V x RGB)
Effective Pixels
: 99.99 %
Pixel Arrangement
: RGB striped arrangement
Back Lighting
: LED

ÑÑUSB interface section
USB Standard
: USB 2.0 High Speed
File System
: FAT 16/ 32
Maximum Power Supply Current
: DC 5 V 1 A
D/A Converter
: 24 Bit
Audio Decoder
: MP3/ WMA/ WAV/ AAC/ FLAC
Video Decoder
: MPEG1/ MPEG2/ MPEG4/ H.264/ MKV/ WMV
Frequency Response
• 192 kHz : 20 – 20,000 Hz
• 96 kHz : 20 – 20,000 Hz
• 48 kHz : 20 – 20,000 Hz
• 44.1 kHz : 20 – 20,000 Hz

ÑÑBluetooth section
Technology
: Bluetooth Ver.2.1 + EDR
Frequency
: 2.402 – 2.480 GHz
Output Power
: +4 dBm (MAX), Power Class2
Maximum Communication range
: Line of sight approx. 10m (32.8 ft)
Audio Codec
SBC
Profile (Multi Profile support)
• HFP (Hands Free Profile)
• A2DP (Advanced Audio Distribution Profile)
• AVRCP (Audio/Video Remote Control Profile)
• PBAP (Phonebook Access Profile)

ÑÑFM tuner section
Frequency Range (step)
: 87.5 MHz – 108.0 MHz (50 kHz)
Usable Sensitivity
: 12.2 dBf
: 1.1 μV/75 Ω, S/N : 30 dB
Frequency Response
: 30 Hz – 14 kHz
S/N Ratio (dB)
: 55 dB (MONO)
Selectivity (± 400 kHz)
: Over 70 dB
Stereo Separation
: 37 dB (1 kHz)

ÑÑAM tuner section
Frequency Range (step)
: 531 – 1611 kHz (9 kHz)
Usable Sensitivity
: 29 μV

ÑÑVideo section

NOTE
• Although the effective pixels for the liquid crystal
panel is given as 99.99% or more, 0.01% of pixels
may not light or may light incorrectly.
• Specifications subject to change without notice.

Color System of External Video Input
: NTSC/PAL
External Video Input Level (RCA jacks)
: 1.0 Vp-p/ 75 Ω
External Audio Max Input Level (RCA jacks)
: 1.8 V/ 10 kΩ
Video Output Level (RCA jacks)
: 1.0 Vp-p/ 75 Ω

28

!B5A-3197-00_KWM.indb 28

2019/06/11 16:42

About this Unit
ÑÑAudio section
Maximum Power (Front & Rear)
: 50 W × 4
Full Bandwidth Power (Front & Rear)
Full Bandwidth Power (at less than 1% THD)
: 21 W × 4
Preout Level (V)
: 2 V/ 10 kΩ
Preout Impedance
: ≤ 600 Ω
Speaker Impedance
:4–8Ω
Equalizer
: 7 Band
Band
Frequency: 62.5/ 160/ 400/ 1k/ 2.5k/ 6.3k/ 16k Hz
Level: -7 – +7 (-7 dB – +7 dB)
LPF
Frequency: 80/ 120/ 160 Hz/ Off

ÑÑInformation on Disposal of Old Electrical
and Electronic Equipment and Batteries
(applicable for EU countries that have
adopted separate waste collection
systems)
Products and batteries with the symbol (crossed-out
wheeled bin) cannot be disposed as household waste.
Old electrical and electronic equipment and batteries
should be recycled at a facility capable of handling
these items and their waste byproducts.
Contact your local authority for details in locating a
recycle facility nearest to you.
Proper recycling and waste disposal will help conserve
resources whilst preventing detrimental effects on our
health and the environment.
Notice: The sign “Pb” below the symbol for batteries
indicates that this battery contains lead.

ÑÑGeneral
Operating Voltage
: 12 V DC car battery
Installation Dimensions (W × H × D)
: 182 × 112 × 75 mm
Main Unit Installation size (W × H × D)
: 178 × 100 × 75 mm (w/o sleeve)
Weight
: 1.1 kg
(Including Mounting Sleeve and Trim plate)

For Israel
‫מידע בדבר השלכה לאשפה של ציוד חשמלי ואלקטרוני‬Ñ Ñ
‫ישן וכן סוללות (רלוונטי למדינות שמשתמשות במערכת‬
.)‫איסוף אשפה מופרדת‬
X ‫לא ניתן להשליך מוצרים וסוללות עם הסימון (פח אשפה עם‬
.‫עליו) כאשפה ביתית רגילה‬
‫יש למחזר ציוד חשמלי ואלקטרוני ישן וכן סוללות במתקן‬
.‫המסוגל לטפל בפריטים כאלה ובתוצרי הלוואי שלהם‬
‫צרו קשר עם הרשות המקומית לקבלת פרטים אודות מתקן‬
‫ מיחזור והשלכה לאשפה נאותים יעזרו‬.‫המיחזור הקרוב אליכם‬
‫לשמר משאבים ולמנוע השפעות שליליות על בריאותנו ועל‬
.‫הסביבה‬
‫ שמתחת לסימון עבור סוללות מציין‬Pb ‫ הסימון‬:‫שימו לב‬
.‫שהסוללה מכילה עופרת‬

English |

29

Continued on the next page...
!B5A-3197-00_KWM.indb 29

2019/06/11 16:42

Declaration of Conformity with regard to the RE Directive 2014/53/EU
Declaration of Conformity with regard to the RoHS Directive 2011/65/EU
Manufacturer:
JVC KENWOOD Corporation
3-12, Moriyacho, Kanagawa-ku, Yokohama-shi, Kanagawa 221-0022, JAPAN
EU Representative:
JVCKENWOOD Europe B.V.
Amsterdamseweg 37, 1422 AC UITHOORN, THE

NETHERLANDS

!B5A-3197-00_KWM.indb 30

2019/06/11 16:42

English
Hereby, JVC KENWOOD declares that the radio equipment KW-M25BT is in
compliance with Directive 2014/53/EU. The full text of the EU declaration of
conformity is available at the following internet address:
Français
Par la présente, JVC KENWOOD déclare que l’équipement radio KW-M25BT est
conforme à la directive 2014/53/UE. L’intégralité de la déclaration de conformité
UE est disponible à l’adresse Internet suivante :
Deutsch
Hiermit erklärt JVC KENWOOD, dass das Funkgerät KW-M25BT der Richtlinie
2014/53/EU entspricht. Der volle Text der EU-Konformitätserklärung steht unter
der folgenden Internetadresse zur Verfügung:
Nederlands
Hierbij verklaart JVC KENWOOD dat de radioapparatuur KW-M25BT in
overeenstemming is met Richtlijn 2014/53/EU. De volledige tekst van de EUverklaring van overeenstemming is te vinden op het volgende internetadres:
Italiano
Con la presente, JVC KENWOOD dichiara che l’apparecchio radio KW-M25BT
è conforme alla Direttiva 2014/53/UE. Il testo integrale della dichiarazione di
conformità UE è disponibile al seguente indirizzo internet:
Español
Por la presente, JVC KENWOOD declara que el equipo de radio KW-M25BT
cumple la Directiva 2014/53/EU. El texto completo de la declaración de
conformidad con la UE está disponible en la siguiente dirección de internet:
Português
Deste modo, a JVC KENWOOD declara que o equipamento de rádio KW-M25BT
está em conformidade com a Diretiva 2014/53/UE. O texto integral da declaração
de conformidade da UE está disponível no seguinte endereço de internet:
Polska
Niniejszym, JVC KENWOOD deklaruje, że sprzęt radiowy KW-M25BT jest zgodny
z dyrektywą 2014/53/UE. Pełny tekst deklaracji zgodności EU jest dostępny pod
adresem:
Český
Společnost JVC KENWOOD tímto prohlašuje, že rádiové zařízení KW-M25BT
splňuje podmínky směrnice 2014/53/EU. Plný text EU prohlášení o shodě je
dostupný na následující internetové adrese:
Magyar
JVC KENWOOD ezennel kijelenti, hogy a KW-M25BT rádióberendezés megfelel a
2014/53/EU irányelvnek. Az EU konformitási nyilatkozat teljes szövege az alábbi
weboldalon érhető el:
Hrvatski
JVC KENWOOD ovim izjavljuje da je radio oprema KW-M25BT u skladu s
Direktivom 2014/53/EU. Cjeloviti tekst deklaracije Europske unije o usklađenosti
dostupan je na sljedećoj internet adresi:
Svenska
Härmed försäkrar JVC KENWOOD att radioutrustningen KW-M25BT är i enlighet
med direktiv 2014/53 / EU. Den fullständiga texten av EU-försäkran om
överensstämmelse finns på följande Internetadress :
Suomi
JVC KENWOOD julistaa täten, että radiolaite KW-M25BT on direktiivin 2014/53/
EU mukainen. EU-vaatimustenmukaisuusvakuutus löytyy kokonaisuudessaan
seuraavasta internet-osoitteesta:
Slovensko
S tem JVC KENWOOD izjavlja, da je radijska oprema KW-M25BT v skladu z
Direktivo 2014/53/EU. Celotno besedilo direktive EU o skladnosti je dostopno na
tem spletnem naslovu:

Slovensky
Spoločnosť JVC KENWOOD týmto vyhlasuje, že rádiové zariadenie KW-M25BT
vyhovuje smernici 2014/53/EÚ. Celý text EÚ vyhlásenia o zhode nájdete na
nasledovnej internetovej adrese:
Dansk
Herved erklærer JVC KENWOOD, at radioudstyret KW-M25BT
er i overensstemmelse med Direktiv 2014/53/EU. EUoverensstemmelseserklæringens fulde ordlyd er tilgængelig på følgende
internetadresse:
Norsk
JVC KENWOOD erklærer herved at radioutstyret KW-M25BT er i samsvar med
Direktiv 2014/53/EU. Den fullstendige teksten til EU-konformitetserklæringen er
tilgjengelig på følgende internettaddresse:
Ελληνικά
Με το παρόν, η JVC KENWOOD δηλώνει ότι ο ραδιοεξοπλισμός KW-M25BT
συμμορφώνεται με την Οδηγία 2014/53/ΕΕ. Το πλήρες κείμενο της δήλωσης
συμμόρφωσης της ΕΕ είναι διαθέσιμο στην ακόλουθη διεύθυνση στο διαδίκτυο:
Eesti
Käesolevaga JVC KENWOOD kinnitab, et KW-M25BT raadiovarustus on
vastavuses direktiiviga 2014/53/EL. ELi vastavusdeklaratsiooni terviktekst on
kättesaadav järgmisel internetiaadressil:
Latviešu
JVC KENWOOD ar šo deklarē, ka radio aparatūra KW-M25BT atbilst direktīvas
2014/53/ES prasībām. Pilns ES atbilstības deklarācijas teksts ir pieejams šādā
tīmekļa adresē:
Lietuviškai
Šiuo JVC KENWOOD pažymi, kad radijo įranga KW-M25BT atitinka 2014/53/EB
direktyvos reikalavimus. Visą EB direktyvos atitikties deklaracijos tekstą galite
rasti šiuo internetiniu adresu:
Malti
B’dan, JVC KENWOOD jiddikjara li t-tagħmir tar-radju KW-M25BT huwa konformi
mad-Direttiva 2014/53/UE. It-test kollu tad-dikjarazzjoni ta’ konformità huwa
disponibbli fl-indirizz intranet li ġej:
Українська
Таким чином, компанія JVC KENWOOD заявляє, що радіообладнання
KW-M25BT відповідає Директиві 2014/53/EU. Повний текст декларації про
відповідність ЄС можна знайти в Інтернеті за такою адресою:
Türkçe
Burada, JVC KENWOOD KW-M25BT radyo ekipmanının 2014/53/AB Direktifine
uygun olduğunu bildirir. AB uyumluluk deklarasyonunun tam metni aşağıdaki
internet adresinde mevcuttur.
Русский
JVC KENWOOD настоящим заявляет, что радиооборудование KW-M25BT
соответствует Директиве 2014/53/EU. Полный текст декларации
соответствия ЕС доступен по следующему адресу в сети Интернет:
Limba română
Prin prezenta, JVC KENWOOD declară că echipamentul radio KW-M25BT este
în conformitate cu Directiva 2014/53/UE. Textul integral al declarației de
conformitate UE este disponibil la urmatoarea adresă de internet:
Български език
С настоящото JVC KENWOOD декларира, че радиооборудването на
KW-M25BT е в съответствие с Директива 2014/53/ЕС. Пълният текст на ЕС
декларацията за съответствие е достъпен на следния интернет адрес:

URL: http://www.jvc.net/cs/car/eudoc/

!B5A-3197-00_KWM.indb 31

2019/06/11 16:42

!B5A-3197-00_KWM.indb 32

2019/06/11 16:42



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Print, Extract
Create Date                     : 2019:06:13 18:50:22+09:00
Modify Date                     : 2019:06:13 18:52:32+09:00
Language                        : ja-JP
XMP Toolkit                     : Adobe XMP Core 5.6-c016 91.163616, 2018/10/29-16:58:49
Metadata Date                   : 2019:06:13 18:52:32+09:00
Format                          : application/pdf
Document ID                     : uuid:8cb91e7f-fdb2-a848-af16-0557e0477337
Instance ID                     : uuid:90b1ba39-3463-6c42-b38a-66e74990b935
Page Count                      : 32

EXIF Metadata provided by EXIF.tools