JVC UX GD6MUB GD6S/UX GD6M User Manual GD6MUB, GD6SA GVT0149 014A

UX-GD6SA UX-GD6SA GVT0149-014A English,

User Manual: JVC UX-GD6MUB UX-GD6MUB, UX-GD6SA English,

Open the PDF directly: View PDF PDF.
Page Count: 48

Scroll down to view the document on your mobile browser.
MICRO COMPONENT SYSTEM UX-GD6S —Consists of CA-UXGD6S and SP-UXGD6S UX-GD6M —Consists of CA-UXGD6M and SP-UXGD6M INSTRUCTIONS GVT0149-014A[A, UB]SUPER VIDEOUX-GD6S UX-GD6MCover[A].fm Page 1 Wednesday, March 23, 2005 10:01 AM
G-1 Warnings, Cautions and Others CAUTION— (STANDBY/ON) button! Disconnect the mains plug to shut the power off completely (all lamps and indications go off). The (STANDBY/ON) button in any position does not disconnect the mains line.•When the unit is on standby, the STANDBY/ON lamp lights in red.•When the unit is turned on, the STANDBY/ON lamp lights in green.The power can be remote controlled. CAUTION To reduce the risk of electrical shocks, fire, etc.:1. Do not remove screws, covers or cabinet.2. Do not expose this appliance to rain or moisture. IMPORTANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave all servicing to qualified service personnel.3. CAUTION: Visible and invisible laser radiation when open and interlock failed or defeated. Avoid direct exposure to beam.4. REPRODUCTION OF LABEL: CAUTION LABEL, PLACED INSIDE THE UNIT. CAUTION • Do not block the ventilation openings or holes.(If the ventilation openings or holes are blocked by a newspaper or cloth, etc., the heat may not be able to get out.)• Do not place any naked flame sources, such as lighted candles, on the apparatus.• When discarding batteries, environmental problems must be considered and local rules or laws governing the disposal of these batteries must be followed strictly.•Do not expose this apparatus to rain, moisture, dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus. Caution: Proper Ventilation To avoid risk of electric shock and fire, and to prevent damage, locate the apparatus as follows:1. Front: No obstructions and open spacing.2. Sides/ Top/ Back: No obstructions should be placed in the areas shown by the dimensions below.3. Bottom: Place on the level surface. Maintain an adequate air path for ventilation by placing on a stand with a height of 10 cm or more.10 cm15 cm1 cm15 cm15 cm 1 cm15 cm15 cmFront view Side viewSP-UXGD6SSP-UXGD6MCA-UXGD6SCA-UXGD6MSP-UXGD6SSP-UXGD6MCA-UXGD6SCA-UXGD6MSP-UXGD6SSP-UXGD6MSafty[A].fm Page 1 Wednesday, March 23, 2005 10:01 AM

Navigation menu