JVC XV N212S N210B/XV User Manual GNT0057 001A

XV-N210B XV-N210B, XV-N212S GNT0057-001A English,

User Manual: JVC XV-N212S XV-N212S English,

Open the PDF directly: View PDF .
Page Count: 2

Download
Open PDF In Browser	View PDF

XV-N210_A2.fm Page 1 Friday, August 20, 2004 11:53 AM

DVD PLAYER
XV-N210B
XV-N212S

Warnings, Cautions and Others
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN

INSTRUCTIONS

CAUTION:

TO REDUCE THE RISK OF ELECTRIC SHOCK.
DO NOT REMOVE COVER (OR BACK)
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead
symbol, within an equilateral triangle is
intended to alert the user to the presence
of uninsulated “dangerous voltage” within
the products enclosure that may be of
sufficient magnitude to constitute a risk of
electric shock to persons.
The exclamation point within an
equilateral triangle is intended to alert the
user to the presence of important
operating and maintenance (servicing)
instructions in the literature accompanying
the appliance.

VIDEO

GNT0057-001A[J/UJ]
EN
0804STHMDWJSC
©2004 Victor Company of Japan, Limited

Region code of DVD VIDEO
This player can play back DVD VIDEO discs
whose region code numbers include “1.”
Examples of playable DVD VIDEO discs:

ALL

1 2
3 4

123
456

The player’s region code is printed on the rear of
the player

WARNING: TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.

Note of Color system format
This player accommodates the NTSC system, and
also can play back discs recorded with PAL
system. (PAL video signals are converted to an
NTSC signal and output.)

For U.S.A.
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may
cause harmful interference to radio communications.
However, there is no guarantee that interference will
not occur in a particular installation. If this equipment
does cause harmful interference to radio or television
reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and
receiver. Connect the equipment into an outlet on a
circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV
technician for help.

Supplied accessories
If anything is missing, consult your dealer
immediately.
• Audio/video cable (Yellow/White/Red) (x 1)
• Remote control (x 1)
• Lithium battery CR2032 (x 1)
• AC power plug adaptor (x 1) (for PX model
ONLY)
• Manufactured under license from Dolby
Laboratories. “Dolby” and the double-D symbol are
trademarks of Dolby Laboratories.
• “DTS” and “DTS 2.0+Digital Out” are trademarks of
Digital Theater Systems, Inc.
• USE OF THIS PRODUCT IN ANY MANNER THAT
COMPLIES WITH THE MPEG-4 VISUAL STANDARD
IS PROHIBITED, EXCEPT FOR USE BY A
CONSUMER ENGAGING IN PERSONAL AND NONCOMMERCIAL ACTIVITIES.
• This product incorporates copyright protection
technology that is protected by U.S. patents and
other intellectual property rights. Use of this
copyright protection technology must be authorized
by Macrovision, and is intended for home and other
limited viewing uses only unless otherwise
authorized by Macrovision. Reverse engineering or
disassembly is prohibited.
For customer use

For Canada
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH
WIDE BLADE OF PLUG TO WIDE SLOT, FULLY
INSERT
For Canada
THIS DIGITAL APPARATUS DOES NOT EXCEED THE
CLASS B LIMITS FOR RADIO NOISE EMISSIONS
FORM DIGITAL APPARATUS AS SET OUT IN THE
INTERFERENCE-CAUSING EQUIPMENT STANDARD
ENTITLED “DIGITAL APPARATUS,” ICES-003 OF THE
DEPARTMENT OF COMMUNICATIONS.

Enter below the Model No. and Serial No. which are
located either on the rear, bottom or side of the cabinet.
Retain this information for future reference.
Model No.
Serial No.:

CAUTION
To reduce the risk of electrical shocks, fire, etc.:
1. Do not remove screws, covers or cabinet.
2. Do not expose this appliance to rain or moisture.

Avoid moisture, water, dust, and high temperatures
• Do not place the player in moist or dusty places.
• If water gets inside the player, turn off the power and
remove the plug from the wall outlet, then consult
your dealer. Using the player in this state may cause
a fire or electrical shock.
• Do not expose the player to direct sunlight or place it
near a heating device.
Notes on installation
• Select a place which is level, dry and neither too hot
nor too cold between 5˚C and 35˚C (41˚F and 95˚F).
• Leave sufficient distance between the player and the
TV.
• Do not install the player in a place subject to
vibrations.
• Do not put heavy objects on the player.
To prevent malfunction of the player
• There are no user-serviceable parts inside. If
anything goes wrong, unplug the power cord and
consult your dealer.
• Do not insert any metallic objects, such as wires,
hairpins, coins, etc. into the player.
• Do not block the vents. Blocking the vents may
damage the player.
To clean the cabinet
• Use a soft cloth. Follow the relevant instructions on
the use of chemically-coated cloths.
• Do not use benzene, thinner or other organic
solvents and disinfectants. These may cause
deformation or discoloring.

Caution ––
STANDBY/ON button!
Disconnect the mains plug to shut the power off
completely. The
STANDBY/ON button in any
position does not disconnect the mains line. The power
can be remote controlled.
IMPORTANT FOR LASER PRODUCTS
1. CLASS 1 LASER PRODUCT
2. CAUTION: Do not open the top cover. There are no
user serviceable parts inside the unit; leave all
servicing to qualified service personnel.
3. CAUTION: Visible and invisible laser radiation when
open and interlock failed or defeated. Avoid direct
exposure to beam.
4. REPRODUCTION OF LABEL: CAUTION LABEL,
PLACED INSIDE THE UNIT.

CAUTION:
• Do not block the ventilation openings or holes. (If the
ventilation openings or holes are blocked by a
newspaper or cloth, etc., the heat may not be able to
get out.)
• Do not place any naked flame sources, such as
lighted candles, on the apparatus.
• When discarding batteries, environmental problems
must be considered and local rules or laws
governing the disposal of these batteries must be
followed strictly.
• Do not expose this apparatus to rain, moisture,
dripping or splashing and that no objects filled with
liquids, such as vases, shall be placed on the
apparatus.

Turning on the power

Before making connections:
• Do not connect the AC power cord until all other connections have been made.
• Connect VIDEO OUT of the unit directly to the video input of your TV. Connecting VIDEO OUT of the player
to a TV via a VCR/an integrated TV/Video system may cause a monitor problem.

Basic Connection
S-video cable*
(not supplied)
S-VID

Set the scanning
mode selector to
“480i.”

EO
VID

LEF
T

AUD
IO
RIG

480 R
p EMO
TE
480
i

VIDE

Yellow

S-VID

VIDE

COM
PON
ENT

RIG

AUD
IO

OUT

COA

XIAL

Red
The unit

White
Connecting to a TV with component jacks
PB

DIG
IT
PCM AL OUT
/ST
REA
M

LEFT

Audio/video
cable*
(supplied)

NOTE
Some progressive TV are not fully compatible with the
unit. To check the compatibility of your TV, contact your
local JVC customer service center.
Connecting to a stereo audio amplifier (receiver)

• DVD VIDEO, SVCD, Video CD, Audio CD
VIDEO

LEFT

• DVD-R/-RW written in the DVD VIDEO format
• CD-R/RW written in the SVCD, Video CD or Audio CD
format
• CD-R/RW written in MP3/JPEG/MPEG-4 in
accordance with the “ISO 9660” format
Supported Digital audio formats:

Precautions

Linear PCM, Dolby Digital, DTS (Digital Theater Systems)

Notes on the power cord
• When you are away on travel or otherwise for an
extended period of time, remove the plug from the
wall outlet. A small amount of power (2.0 W) is always
consumed while the power cord is connected to the
wall outlet.
• When unplugging the player from the wall outlet,
always pull the plug, not the power cord.
• Do not handle the power cord with wet hands!
• Disconnect the power cord before cleaning the
player or moving the player.
• Do not alter, twist or pull the power cord, or put
anything heavy on it, which may cause fire, electric
shock, or other accidents.
• If the cord is damaged, consult a dealer and have the
power cord replaced with a new one.

NOTES
• If a disc gets dirty, scratched or warped, or due to the
disc characteristics or recording conditions, the
player may not be able to play back such discs.
• The player can play back audio signals recorded in
MIX-MODE CD, CD-G, CD-EXTRA and CD TEXT.
• With some discs, operations may not be possible.
Unplayable discs
If you try to play back discs listed below, noise may
generate causing damage to speakers.
• DVD-RW written in the VR format
• DVD-ROM, DVD-RAM, DVD AUDIO, CD-ROM,
PHOTO CD, SACD
• Unfinalized discs
• Discs of irregular shape or discs with tape, seals or
paste on either the label side or playback side.
Playing back these discs may damage the player.

NOTES
• If your TV has a monaural
audio input instead of stereo,
use an optional audio cable
which converts stereo audio
output to monaural.
• The VIDEO jack, S-VIDEO OUT
jack and COMPONENT jacks
can not be used at the same
time.
Connect only the VIDEO jack,
S-VIDEO OUT jack, or
COMPONENT jacks which you
want to use.

COMPONENT

Playable discs

DIGITAL OUT
PCM/STREAM

To component video input
RIGHT

When connecting your TV by the component video
cable, set the scanning mode selector as follows:
• When the TV does not support the progressive
scanning mode: \480i
• When the TV supports the progressive scanning
mode: \480p
• When you want to select the scanning mode
depending on the source condition: \REMOTE*
* To switch the scanning mode between Progressive
(480p) and Interlace (480i) by the remote control,
press and hold down VFP-I/P for a few seconds.
NOTES
• Connect “Y” to “Y,”“PB” to “PB(CB),”“PR” to “PR(CR)”
correctly.
• When using the COMPONENT jacks, do not connect
the S-VIDEO OUT jack with the player.
About the scanning mode indicator

COAXIAL

To analog audio input

AUDIO OUT

Connecting to a digital audio device
To enjoy high-quality surround sound, connect the
DIGITAL OUT (COAXIAL) jack to a Dolby Digital or DTS
decoder or an amplifier with a built-in decoder.
LEFT

COAXIAL

AUDIO OUT

1 Press 0 to open the disc tray.
2 Place a disc in the disc tray.
• To insert an 8-cm disc, place it in the inner recess.
3 Press 0 to close the disc tray.

Changing the display brightness
Press and hold DISPLAY/DIMMER to
change the brightness of the display
window. Release the button at the desired
brightness.

Locating the beginning of a
scene or song
STANDBY/ON

DISPLAY
/DIMMER

TITLE
/GROUP RETURN

SOUND
EFFECT

CANCEL

Changing the display window contents

Each time you press DISPLAY/DIMMER,
the display window contents changes.

+10

ANGLE SUB TITLE AUDIO

ZOOM

SLIDE EFFECT

TOP MENU

Basic playback
Buttons
3
7

With the label side up
8

Point toward the remote sensor
directly as possible (the operating
range is approx. 5 m.)

¡/1

About On-screen guide icons
: Playback.
: Pause.
Main display
• Each indicator lights up when corresponding
function/mode is activated, or corresponding
information is on the main display.

: Slow-motion playback with the current
speed.

: Fast forward/backward playback with
the current speed.

: At the beginning of a scene containing
multi-angle views.
: At the beginning of a scene containing
multi-audio sounds.
: At the beginning of a scene containing
multi-subtitles.
You can change the setting so that the on-screen
guide icons do not appear on the TV screen. (See
“ON SCREEN GUIDE” in “Initial settings.”)

¢/4

To do
Start Playback
Stop
• When RESUME MODE is ON
or DISC RESUME, this player
memorizes the position on
the disc where you
interrupted playback.
– To resume playback, press
3.
– To stop playback
completely, press 7 again.
Pause*
• Each time you press the
button, the still picture
advances to the next frame.
Fast forward/backward*
(While paused)
Slow-motion playback*
• Each time you press the
button, the playback speed
changes.
Skip chapter/track
• If you press and hold the
button during playback,
playback is advanced/
reversed at 5 times normal
speed.

QUICK
(Only for DVD Video)
PLAYBACK The disc is played back at
about 1.5 times normal speed.
The sound is not muted, and
the subtitle does not go off.
(Only for DVD Video)
The playback position moves
back 10 seconds before the
current position (only within the
same title).
* To return to normal playback, press 3.

THUMBNAIL
/LIST

ENTER

SET UP

I/P

SLOW

ON SCREEN

You can select a title/chapter/
track directly and start playback.
For DVD Video:
(While stopped) select title.
(While playing back) select
chapter.
For SVCD/VCD/CD:
Select track.
To select 5: press 5.
To select 23: press +10, +10,
then 3.
To select 40: press +10, +10,
+10, then 10.
• If you press TITLE/GROUP
before entering the number,
you can select the title instead
of the chapter.

SELECT

DVD PLAYER SET UP

You can change the sound field only
for analog audio output.
Each time you press SOUND
EFFECT, the Sound Effect mode
changes.
• As the value becomes bigger, the
Sound Effect works stronger.

The VFP (Video Fine Processor)
function allows you to adjust the
picture character according to the
type of programming, picture tone or
personal preferences.
1 Press VFP-I/P.
2 Press 2/3 to select the desired
preset.

Changing the language, sound
and scene angle
Using the disc menu
You can operate a disc—DVD and
SVCD/VCD with Playback Control*
(PBC)—using the disc menu
shown on the TV screen.
* A method of controlling disc play
for SVCD/VCD by using the disc
menu.

STANDBY/ON

DISPLAY
/DIMMER
SOUND
EFFECT

TITLE
/GROUP RETURN

CANCEL

+10

ANGLE SUB TITLE AUDIO

ZOOM

SLIDE EFFECT

USER 1
GAMMA

MID

BRIGHTNESS

+ 4

CONTRAST

+10

SATURATION

+10

TINT

+10

SHARPNESS

LOW

Y DELAY

+ 2

THUMBNAIL
/LIST

SET UP

ENTER

7 For DVD
1 Press TOP MENU or MENU to show the disc menu.
2 Press 5/∞/2/3 to select a desired item, then press
ENTER or 3 (SELECT).
• With some discs, you can also select items by entering the
number using the numeric buttons.
7 For SVCD/VCD
1 In stop mode, press TOP MENU or 3 (SELECT) to show
the menu.
2 Press the numeric buttons to select a desired item.
To select 5: press 5.
To select 23: press +10, +10, then 3.
To select 40: press +10, +10, +10, then 10.
• To move to the next or previous page of the current menu,
press 4 or ¢.
• To return to the previous menu, press RETURN.
To cancel PBC
Press the numeric buttons instead of 3 (SELECT) to start
playback.
To reactivate PBC
• Press TOP MENU or MENU - THUMBNAIL/LIST.
• Press 7 to stop playback, then 3 (SELECT).

I/P

SELECT

CLEAR

ON SCREEN

To do
For DVD Video:
select audio languages.
For SVCD/VCD/CD:
select the audio
channel.

SUBTITLE

select the subtitle.

ANGLE

select the view-angle.

ENGLISH

AUDIO LANGUAGE

ENGLISH

SUBTITLE

OFF

ON SCREEN LANGUAGE

ENGLISH

FRENCH
SPANISH

2 Press 5/∞ to select the on-screen language for

the preference displays, etc., then press ENTER.

Precautions of the safe use of battery
• Store the battery in a place where children cannot
reach. If a child accidentally swallows the battery,
consult a doctor immediately.
• Do not recharge, short, disassemble or heat the
battery or dispose of it in a fire.
Doing any of these things may cause the battery to
give off heat, crack, or start a fire.
• Do not leave the battery with other metallic materials.
Doing this may cause the battery to give off heat,
crack, or start a fire.
• When throwing away or saving the battery, wrap it in
tape and insulate; otherwise, the battery may start to
give off heat, crack, or start a fire.
• Do not poke the battery with tweezers or similar tools.
Doing this may cause the battery to give off heat,
crack, or start a fire.
• Dispose of batteries in the proper manner, according
to federal, state, and local regulations.

DVD PLAYER SET UP
MONITOR TYPE

4:3 L.B.

PICTURE SOURCE
SCREEN SAVER

16:9
AUTOLB
4:3
4:3 PS

BACK GROUND

STANDARD

3 Press 5/∞ to select the your monitor type, then

press ENTER.
• For a normal (conventional) TV, select “4:3 LB” or
“4:3 PS.” (See “MONITOR TYPE” in “Initial
settings.”)
• For a wide-screen TV, select “16:9.”
DVD PLAYER SET UP
DIGITAL AUDIO OUTPUT

DOLBY DIGITAL/PCM

PCM ONLY
ANALOG DOWN MIX

DOLBY PROLOGIC
DOLBY
DIGITAL/PCM

D.RANGE CONTROL

STREAM/PCM
ON

OUTPUT LEVEL

STANDARD

Turning on and off the player
4 Press 5/∞ to select a desired digital output

signal type, then press ENTER.
Set this item correctly according to your Dolby
Digital decoder, DTS decoder, or amplifier with a
built-in decoder.
(If you do not connect the player to such a device,
press ENTER to finish the setting.)
• When connecting to a Dolby Digital decoder,
select “DOLBY DIGITAL/PCM.”
• When connecting to a DTS decoder, select
“STREAM/PCM.”
• When connecting to other digital device, select
“PCM ONLY.”

To bring up the DVD PLAYER SET UP display later
Press SET UP for a few seconds until the DVD PLAYER
SET UP display appears.

For watching a movie
software in a room with
suppressed light.
You can adjust
parameters that affect the
picture character and
store the settings as a user
preset.See below.

Adjust this if the neutral color is bright or dark.
The brightness of dark and bright portion is
maintained (LOW/MID/HIGH).

BRIGHTNESS

Adjust this if the picture is bright or dark on the
whole (–16 (darkest) to +16 (brightest)).

CONTRAST

Adjust this if the far and near position is
unnatural (–12 to +12).

SATURATION

Adjust this if the picture is whitish or blackish
(–16 (blackest) to +16 (whitest)).

TINT

Adjust this if the appearance of flesh tone is
unnatural (–16 to +16).

SHARPNESS

Adjust this if the picture is indistinct (LOW/
HIGH).

Y DELAY

Adjust this if the picture looks separately/
overlapped (–2 to +2).

3 Press 5/∞ to adjust the parameter, then press ENTER.
4 Repeat step 2 and 3 to adjust other parameters.
5 Press VFP-I/P to finish the setting.

When a disc is inserted, press ON SCREEN twice.
A menu bar for the type of disc inserted will appear
under the status bar.
Ex.: Menu bar for DVD VIDEO

specifies a chapter to play back from
(DVD only).

To dismiss the menu bar, press ON SCREEN.

selects the audio language (DVD), sound
track (DVD), or audio channel (VCD/SVCD) during
playback.

Basic operation procedure
with.

To adjust the picture tone
1 Select “USER1” or “USER2.”
2 Press 5/∞ to select a parameter, then press ENTER.
GAMMA

specifies beginning point of a title (DVD) or a
disc (CD/VCD/SVCD) by the time.
DVD:
In any condition
CD:
In any condition except program or
random playback
VCD/SVCD: In any condition except PBC or program
or random playback

To bring up the menu bar

2 Press ENTER.

Parameter

USER1
USER2

You can use various functions from the menu bar.

1 Press 2/3 to select the icon you want to work

NORMAL For watching TV in a
general room.
CINEMA

5/∞ to select the desired item.
3 Press ENTER to finish the
setting.
AUDIO

Selected
Preset

TOP MENU

1 Press the button.
2 Press the button repeatedly or

Buttons

MENU LANGUAGE

Menu bar functions

CLEAR

Lithium coin battery
(product number: CR2032)

Changing the picture tone (VFP)

Each time you press ZOOM, the
magnification changes.
• You can use 5/∞/2/3 button to
move the zoomed position.
To return the normal playback, select
the normal size by pressing ZOOM
repeatedly.

Before enjoying this unit, make the initial settings as
follows:
1 Press ENTER.

Installing the battery in the remote control

To analog audio input

Changing the Sound Field

Zooming the picture

EXECUTE DVD PLAYER SETUP? - BASIC PICTURE/AUDIO
SETTING
YES - PRESS ENTER NO - PRESS CANCEL

NOTES
• Depending on the disc, no signal may be output from
the DIGITAL OUT. Make an analog connection in this
case.
• Set [DIGITAL AUDIO OUTPUT] in the [AUDIO]
preference display correctly according to the
connected digital audio equipment. (See “DIGITAL
AUDIO OUTPUT” in “Initial settings.”)

SLOW
PREVIOUS

After all other connections have been made, insert the
AC power plug to the wall outlet firmly.
For PX model only
The STANDBY indicator lights in red.

Turning on and off the player

When you turn on the player for the first time after
purchase, the following message appears on the TV
screen.

Inserting the AC power plug

To digital
audio input

Advanced Operations

Insert a disc

Initial setup

Press
STANDBY/ON.
For PX model only
The STANDBY/ON indicator in red on the front panel
goes off.

DIGITAL OUT
PCM/STREAM

RIGHT

[PICTURE SOURCE] Source type of DVD VIDEO
of the PICTURE menu Film source
Video source
AUTO
[DDP]
[P]
FILM
[DDP]
[DDP]
VIDEO(NORMAL)/
[P]
[P]
(ACTIVE)

Basic Operations

Turning on and off the player

Connections

selects the subtitle language (DVD) or
subtitle (SVCD) during playback.

After pressing ENTER:
(1) When a pull-down menu appears, press 5/∞ to
select the setting you want, then press ENTER.
(2) When a number-entry box appears, use the
numeric buttons to enter the number you want,
then press ENTER.
(3) When changing
setting, press ENTER

selects a desired scene angle in a multiangle part (DVD only).
specifies the playback order of tracks while
stopped (unavailable for DVD). You can program up to
99 tracks.

repeatedly to select the setting you want.
NOTES
• The selected item on the menu bar is shown in green.
• The available functions differ depending on the unit
status. Refer to the explanation below to check when
you can use a certain function.

1. After selecting

icon, press the numeric

buttons to specify tracks in the desired order.
• To correct the program, press 5/∞ to move
to
the track to be corrected, then press CANCEL. The
track is erased and the subsequent programmed
tracks move up.
Pressing 7 clears all the programmed tracks.
2. Press 3(SELECT) to start program playback.
• During program playback, you cannot edit the
program contents.
• To exit the program mode, press ON SCREEN after
clearing the program.

Menu bar functions
selects the time mode shown in the display
window and the status bar.
• TOTAL: Elapsed time of current title (DVD) or a disc
(CD/VCD/SVCD)
• T.REM: Remaining time of current title (DVD) or a
disc (CD/VCD/SVCD)
(while in stop mode, disc total time)
• TIME: Elapsed time of current chapter (DVD) or
track (CD/VCD/SVCD)
• REM: Remaining time of current chapter (DVD) or
track (CD/VCD/SVCD)
(while in stop mode, current track total time)

activates random playback while stopped
(unavailable for DVD).
1. After selecting

icon, press ENTER.

The player starts random playback.

selects repeat mode.
DVD:
During playback
CD:
In any condition
VCD/SVCD: In any condition except PBC playback
• CHAPTER: Current chapter repeat (DVD)
• TITLE:
Current title repeat (DVD)
• TRACK:
Current track repeat (CD/VCD/SVCD)
• ALL:
All track repeat (CD/VCD/SVCD)
• A-B:
A-B repeat (During playback). After
selecting A-B, press ENTER at the
beginning point of repeat, then press
ENTER again at the end point.
• OFF:
Repeat mode deactivated. Select this to
quit repeat mode.

XV-N210_A2.fm Page 2 Friday, August 20, 2004 11:53 AM

Audio/Video files playback

Initial settings

You can play back MP3/JPEG/MPEG4 (simple profile/asf file) files on a CD/CD-R/RW.

Precautions

Various playback mode

• Use “ISO 9660” as the disc format.
• The player does not support “packet writing (UDF
files)” discs.
• The player supports discs recorded with up to five
multiple sessions.
• The player may be unable to play back a disc due to
the characteristics or recording conditions.
• The player recognizes up to the fifth layer of groups,
999 files per group (including unplayable files), and
up to 250 groups per disc.
• Add the appropriate extension (“.mp3”, “.jpg”, and
“.asf”) to the file name.
• MP3i and MP3 Pro are not available.
• The player cannot play back a picture of more than
5120 x 3413 pixels (baseline JPEG) or 2048 x 1536
pixels (progressive JPEG).

GROUP

MP3

MOVIE01.asf

MPEG4

MOVIE02.asf

SLIDESHOW

PICT01.jpg

MIX

PICT02.jpg

To zoom in a picture
Press ZOOM.
Each time you press ZOOM, you can magnify a JPEG
file (x1.5/x2/x4).
• You can also magnify an MPEG-4 file (x2/x4).

Random playback

1. While stopped, press 5/∞/2/3 to move the cursor
bar to playback mode.
2. Press ENTER repeatedly to select RANDOM.
3. Press 3 to move the cursor bar to the file column,
then press 3(SELECT).

Program playback

1. While stopped, press 5/∞/2/3 to move the cursor
bar to playback mode.
2. Press ENTER repeatedly to select PROGRAM.
3. Press 5/∞/2/3 to select the desired file, then press
ENTER.
4. Repeat step 3 until all the desired files are selected.
• To erase the last programmed file, press 2 to
move the cursor bar to the programmed files
column, then press CANCEL.
5. Press 3(SELECT).

Select these
sections to show the
upper layer.
Current file

PICT03.jpg
MUSIC01.mp3
MUSIC02.mp3

Group column
Current group
Current playback mode

• To play back a disc continuously, select NORMAL.

How to set the Initial settings
LANGUAGE

To rotate/reflect a still picture
While a still picture is played back:
• Pressing 2/3 rotates the picture by 90°.
• Pressing 5 reflects the picture vertically.
• Pressing ∞ reflects the picture horizontally.

2
3
4
5

File column

1. Press and hold MENU-THUMBNAIL/LIST while a
JPEG file is selected on the Control display.
2. Press 5/∞/2/3 to select the desired picture, then
press ENTER.
• You can change the page of thumbnail list by
pressing 4/¢.

MENU LANGUAGE

ENGLISH

AUDIO LANGUAGE

ENGLISH

SUBTITLE

OFF

ON SCREEN LANGUAGE

ENGLISH

Press 2/3 to select the menu.
Press 5/∞ to move to select the item.
Press ENTER.
Press 5/∞ to select the options, then press
ENTER.

Slide show playback of JPEG files
Press 3(SELECT) while a JPEG file is selected on the
Control display.
• To select slide show effect
Press and hold ANGLE-SLIDE EFFECT until
[SLIDE EFFECT MODE:] and the current mode
appears on the TV screen.
By pressing and holding the button repeatedly, you
can select the effect out of 11 effects, random effect
selection (RAND), and no effect (NONE).
The effect is not applied to progressive JPEG files.

Contents
You can select the default menu language of DVD VIDEO.
You can select the default audio language of DVD VIDEO.
You can select the default subtitle language of DVD VIDEO.
You can select “ENGLISH,” “FRENCH,” or “SPANISH” as the on-screen language.

Item
DIGITAL AUDIO OUTPUT

PICTURE menu
ANALOG DOWN MIX
Item
MONITOR TYPE
16:9
4:3 LB

To dismiss a preference display
Press SET UP.
NOTES
• Some items in the menus cannot be changed during
playback.
• While CD-R/RW which contains MP3/MPEG-4 files is
inserted, you cannot show the menus.
• If the upper and lower parts of the menu are cut off,
adjust the picture size control of the TV.
• For settings of the LANGUAGE menu or the
PARENTAL LOCK menu, see also “Language
codes” below.
• Depending on the disc, the settings may not apply
correctly.

AUDIO menu

LANGUAGE menu
Item
MENU LANGUAGE
AUDIO LANGUAGE
SUBTITLE
ON SCREEN LANGUAGE

1 Press SET UP.

To select a JPEG files from the thumbnail list

Selecting a specific file or group

NORMAL

Various JPEG files playback

Repeat playback
1. While stopped, press 5/∞/2/3 to move the cursor
bar to playback mode.
2. Press ENTER repeatedly to select the desired repeat
mode.
• REPEAT 1: Repeats the current file.
• REPEAT GROUP: Repeats all files in the current
group.
• REPEAT ALL: Repeats all files on the disc.
3. Press 3 to move the cursor bar to the file column,
then press 3(SELECT).

You can select files or folders (groups) using the
Control display on the TV screen.
Control display
DISC CONTROL

You can change the settings of this player according to
your preferences and playing environment.

4:3 PS

Contents
You can select the monitor type to match your TV when you play back DVD VIDEO
discs recorded for wide-screen televisions.
[16:9] (Wide television screen): For a wide-screen (16:9) TV.
[4:3 LB] (Letter Box conversion): For a normal (4:3) TV. Displays a wide-screen
picture to fit the width of the TV screen keeping the aspect ratio.
[4:3 PS] (Pan Scan conversion): For a normal (4:3) TV. The picture is zoomed
up to filling the screen vertically and the left and right sides of the picture are
cut off.

D.RANGE CONTROL

OUTPUT LEVEL
PICTURE SOURCE

SCREEN SAVER
BACKGROUND

Press 5/∞/2/3 to move the cursor bar to a desired
file, then press 3(SELECT).
• When you press ENTER, only the selected file is
played back.

You can obtain optimal picture quality by selecting the source type of the disc
contents.
[AUTO]: Normally, select this option. The player recognizes the picture type (film
or video source) of the current disc according to the disc information.
[FILM]: For a film source disc.
[VIDEO(NORMAL)]: For a video source disc with relatively a few movements.
[VIDEO(ACTIVE)]: For a video source disc with relatively a lot of movements.
You can set the screen saver function to ON or OFF.
You can use your favorite image as the opening display.
[STANDARD]: Display the JVC original image.
[USER]: Display your favorite image as the opening display when a JPEG image
is registered.
[SAVE AS BACKGROUND]: To register a new image, select this while a JPEG
image is displayed on the TV.

OTHERS menu
Item
RESUME

ON SCREEN GUIDE
AUTO STANDBY
PARENTAL LOCK
PARENTAL LOCK
COUNTRY CODE

SET LEVEL

NONE

PASSWORD

____

EXIT

Troubleshooting
No picture is displayed on the TV screen or
the screen is blurred or divided into two parts.

Power does not come on.

\ The player is in the progressive scanning mode
though it is connected to a TV via the VIDEO or
S-VIDEO OUT jack. Observe the display window. If
[P] is turned on, the player is in the progressive
scanning mode.
Set the VIDEO SIGNAL SELECTOR on the rear
panel to “480i,” or set it to “REMOTE” and make the
Progressive scanning mode inactive by using the
VFP - I/P button.

\ Power plug is not inserted securely. Plug in
securely.

Operation
“REGION CODE ERROR!” is shown on the TV.
\ Region code of the inserted disc does not match the
player. Check the region code of the disc printed on
the disc jacket.

Operation is not possible.

Audio

\ Microcomputer malfunction due to lightning or static
electricity. Turn off the power and unplug the power
cord, then connect the power cord again.
\ Moisture condensation caused by a sudden change
of temperature or humidity. Turn off the power, then
turn it on a few hours later.
\ The disc does not allow the operation, or an
unplayable disc is inserted. Check and replace the
disc.

DVD VIDEO disc playback sound level is
lower than TV broadcast sound level.

\ Set the [D.RANGE CONTROL] preference to [TV
MODE].

Analog audio output is distorted.

\ Set the [OUTPUT LEVEL] preference to [LOW].

MP3/JPEG/MPEG-4

[LOCK] is displayed on the display window
and the disc tray does not open.

No sound and/or no picture comes out.

\ When you press 0 while pressing down 7 on the
player in standby mode, the tray lock function is
activated. The disc tray cannot be opened or closed
in this status. To release this status, press 0 while
pressing down 7 on the player in standby mode.

\ MP3/MPEG-4 disc is recorded with the “packet
writing (UDF file).” It cannot be played.
Check the files you want to play back.

Files (tracks) are not played in the recorded
order.

\ This player plays the files in the alphabetic order.
So, the playback order can vary.

Picture
Picture is noisy.

\ The player is connected to a VCR directly and the
copyguard function is activated. Connect the player
so that the picture signal flows directly to the TV.
With some discs, the picture may be blurred when
[PICTURE SOURCE] is set to [FILM] or [AUTO].
Set [PICTURE SOURCE] to [VIDEO (NORMAL)] or
[VIDEO (ACTIVE)].

MPEG-4 files cannot be played back.
\ The format of the file is not asf.

AD
AE
AF
AG
AI
AL
AM
AN
AO
AQ
AR
AS
AT
AU
AW
AZ
BA

Andorra
United Arab Emirates
Afghanistan
Antigua and Barbuda
Anguilla
Albania
Armenia
Netherlands Antilles
Angola
Antarctica
Argentina
American Samoa
Austria
Australia
Aruba
Azerbaijan
Bosnia and
Herzegovina
BB Barbados
BD Bangladesh
BE Belgium
BF Burkina Faso
BG Bulgaria
BH Bahrain
BI
Burundi
BJ Benin
BM Bermuda
BN Brunei Darussalam
BO Bolivia
BR Brazil
BS Bahamas
BT Bhutan
BV Bouvet Island
BW Botswana
BY Belarus
BZ Belize
CA Canada
CC Cocos (Keeling)
Islands
CF Central African
Republic
CG Congo
CH Switzerland
CI
Côte d’Ivoire
CK Cook Islands
CL Chile
CM Cameroon
CN China
CO Colombia
CR Costa Rica
CU Cuba
CV Cape Verde

CX
CY
CZ
DE
DJ
DK
DM
DO
DZ
EC
EE
EG
EH
ER
ES
ET
FI
FJ
FK
FM
FO
FR
FX
GA
GB
GD
GE
GF
GH
GI
GL
GM
GN
GP
GQ
GR
GS
GT
GU
GW
GY
HK
HM
HN
HR
HT
HU
ID
IE

Christmas Island
Cyprus
Czech Republic
Germany
Djibouti
Denmark
Dominica
Dominican Republic
Algeria
Ecuador
Estonia
Egypt
Western Sahara
Eritrea
Spain
Ethiopia
Finland
Fiji
Falkland Islands
Micronesia (Federated
States of)
Faroe Islands
France
France, Metropolitan
Gabon
United Kingdom
Grenada
Georgia
French Guiana
Ghana
Gibraltar
Greenland
Gambia
Guinea
Guadeloupe
Equatorial Guin ea
Greece
South Georgia and
theSouth Sandwich
Guatemala
Guam
Guinea-Bissau
Guyana
Hong Kong
Heard Island and
McDonald Islands
Honduras
Croatia
Haiti
Hungary
Indonesia
Ireland

IL
IN
IO
IQ
IR
IS
IT
JM
JO
JP
KE
KG
KH
KI
KM
KN
KP
KR
KW
KY
KZ
LA
LB
LC
LI
LK
LR
LS
LT
LU
LV
LY
MA
MC
MD
MG
MH
ML
MM
MN
MO
MP
MQ
MR
MS
MT

Israel
India
British Indian Ocean
Territory
Iraq
Iran (Islamic Republic
of)
Iceland
Italy
Jamaica
Jordan
Japan
Kenya
Kyrgyzstan
Cambodia
Kiribati
Comoros
Saint Kitts and Nevis
Korea, Democratic
People’s Republic of
Korea, Republic of
Kuwait
Cayman Islands
Kazakhstan
Lao People’s
Democratic Republic
Lebanon
Saint Lucia
Liechtenstein
Sri Lanka
Liberia
Lesotho
Lithuania
Luxembourg
Latvia
Libyan Arab
Jamahiriya
Morocco
Monaco
Moldova, Republic of
Madagascar
Marshall Islands
Mali
Myanmar
Mongolia
Macau
Northern Mariana
Islands
Martinique
Mauritania
Montserrat
Malta

MU
MV
MW
MX
MY
MZ
NA
NC
NE
NF
NG
NI
NL
NO
NP
NR
NU
NZ
OM
PA
PE
PF
PG
PH
PK
PL
PM

Mauritius
Maldives
Malawi
Mexico
Malaysia
Mozambique
Namibia
New Caledonia
Niger
Norfolk Island
Nigeria
Nicaragua
Netherlands
Norway
Nepal
Nauru
Niue
New Zealand
Oman
Panama
Peru
French Polynesia
Papua New Guinea
Philippines
Pakistan
Poland
Saint Pierre and
Miquelon
PN Pitcairn
PR Puerto Rico
PT Portugal
PW Palau
PY Paraguay
QA Qatar
RE Réunion
RO Romania
RU Russian Federation
RW Rwanda
SA Saudi Arabia
SB Solomon Islands
SC Seychelles
SD Sudan
SE Sweden
SG Singapore
SH Saint Helena
SI
Slovenia
SJ Svalbard and Jan
Mayen
SK Slovakia
SL Sierra Leone
SM San Marino

SN
SO
SR
ST
SV
SY
SZ
TC
TD
TF
TG
TH
TJ
TK
TM
TN
TO
TP
TR
TT
TV
TW
TZ
UA
UG
UM
US
UY
UZ
VA
VC
VE
VG
VI
VN
VU
WF
WS
YE
YT
YU
ZA
ZM
ZR
ZW

Senegal
Somalia
Suriname
Sao Tome and
Principe
El Salvador
Syrian Arab Republic
Swaziland
Turks and Caicos
Islands
Chad
French Southern
Territories
Togo
Thailand
Tajikistan
Tokelau
Turkmenistan
Tunisia
Tonga
East Timor
Turkey
Trinidad and Tobago
Tuvalu
Taiwan
Tanzania, United
Republic of
Ukraine
Uganda
United States Minor
Outlying Islands
United States
Uruguay
Uzbekistan
Vatican City State
(Holy See)
Saint Vincent and the
Grenadines
Venezuela
Virgin Islands (British)
Virgin Islands (U.S.)
Vietnam
Vanuatu
Wallis and Futuna
Islands
Samoa
Yemen
Mayotte
Yugoslavia
South Africa
Zambia
Zaire
Zimbbabwe

Language codes list for the LANGUAGE menu

Picture is distorted when using
COMPONENT or S-VIDEO OUT jack(s).

\ Both the component connection and S-video
connection are made. Disconnect the unused one.

Afar
Abkhazian
Afrikaans
Ameharic
Arabic
Assamese
Aymara
Azerbaijani
Bashkir
Byelorussian
Bulgarian
Bihari
Bislama
Bengali,Ban
gla
BO Tibetan
BR Breton

AA
AB
AF
AM
AR
AS
AY
AZ
BA
BE
BG
BH
BI
BN

CA
CO
CS
CY
DA
DZ
EL
EO
ET
EU
FA
FI
FJ
FO
FY
GA
GD

Catalan
Corsican
Czech
Welsh
Danish
Bhutani
Greek
Esperanto
Estonian
Basque
Persian
Finnish
Fiji
Faroese
Frisian
Irish
Scots Gaelic

GL
GN
GU
HA
HI
HR
HU
HY
IA
IE
IK
IN
IS
IW
JI
JW
KA

Galician
Guarani
Gujarati
Hausa
Hindi
Croatian
Hungarian
Armenian
Interlingua
Interlingue
Inupiak
Indonesian
Icelandic
Hebrew
Yiddish
Javanese
Georgian

KK
KL
KM
KN
KO
KS
KU
KY
LA
LN
LO
LT
LV
MG
MI

Kazakh
Greenlandic
Cambodian
Kannada
Korean
(KOR)
Kashmiri
Kurdish
Kirghiz
Latin
Lingala
Laothian
Lithuanian
Latvian,
Lettish
Malagasy
Maori

Macedonian
Malayalam
Mongolian
Moldavian
Marathi
Malay (MAY)
Maltese
Burmese
Nauru
Nepali
Dutch
Norwegian
Occitan
(Afan)
Oromo
OR Oriya
PA Panjabi

MK
ML
MN
MO
MR
MS
MT
MY
NA
NE
NL
NO
OC
OM

Contents
You can select the resume playback mode.
[ON]: The player resumes playback from the position where playback has been
stopped if the disc is still in the disc tray.
[OFF]: This function is deactivated.
[DISC RESUME]: The player resumes playback of the last 30 discs played. The
player retains a memory of the stopped position of each disc even if the disc is
removed from the disc tray.
Activate or deactivate the on-screen guide.
Set the time until the player turns off (into standby) automatically if playback is
stopped for more than 30 minutes or 60 minutes.
Select this item, then press ENTER to show the PARENTAL LOCK menu for
limiting playback by children. Scenes which are limited by this function are not
played or replaced with other scenes.
[COUNTRY CODE]: Select the code of your country/area.
[SET LEVEL]: Select the level of restriction. (“1” is the strictest.)
[PASSWORD]: Enter your password by pressing the numeric buttons (0 to 9).
[EXIT]: Select this and press ENTER to go back to the OTHERS menu.
Note:
• Some DVD VIDEO cannot be played by this function. If you try to play such a disc,
the PARENTAL LOCK menu appears on the TV and asks whether you want to
release the lock or not.
To release the lock and play, select “TEMPORARY RELEASE,” press ENTER, then
enter your password. Otherwise, eject the disc.
• To change the setting of the limitation, you need to enter your password.
• If you forget your pass word, enter “8888.”

Country/Area code list for Parental Lock

Power

Contents
Set this item correctly when connecting to an external device equipped with a
digital input.
[PCM ONLY]: When connecting to audio equipment which can decode only linear
PCM signals.
[DOLBY DIGITAL/PCM]: When connecting to a Dolby Digital decoder or an
amplifier with a built-in Dolby Digital decoder.
[STREAM/PCM]: When connecting to an amplifier with a built-in DTS, MPEG
8
Multichannel or Dolby Digital decoder.
Set this item properly according to your analog audio connection to play the sound of
the surround multichannel audio on a DVD VIDEO.
[DOLBY SURROUND]: Select this when connecting to a surround decoder.
[STEREO]: Select this when connecting to a stereo amplifier or TV, or in case you
want to record from a DVD VIDEO to a MiniDisc, cassette, etc.
Set this item to listen to DVD VIDEO recorded in Dolby Digital format at low or middle
volume.
[WIDE RANGE]: You can enjoy powerful playback sound.
[NORMAL]: Normally, select this.
[TV MODE]: Select this if the sound level of DVD VIDEO is lower than the one of TV
program to make the sound at a lower volume clear.
Set this item to attenuate the level of the signal output from the analog AUDIO OUT
terminals. If the sound from the speaker is distorted, select [LOW].

PL Polish
PS Pashto,
Pushto
PT Portuguese
QU Quechua
RM RhaetoRomance
RN Kirundi
RO Rumanian
RU Russian
RW Kinyarwanda
SA Sanskrit
SD Sindhi
SG Sangho
SH SerboCroatian
SI Singhalese

SK
SL
SM
SN
SO
SQ
SR
SS
ST
SU
SV
SW
TA
TE
TG
TH
TI

Slovak
Slovenian
Samoan
Shona
Somali
Albanian
Serbian
Siswati
Sesotho
Sundanese
Swedish
Swahili
Tamil
Telugu
Tajik
Thai
Tigrinya

TK
TL
TN
TO
TR
TS
TT
TW
UK
UR
UZ
VI
VO
WO
XH
YO
ZU

Turkmen
Tagalog
Setswana
Tongan
Turkish
Tsonga
Tatar
Twi
Ukrainian
Urdu
Uzbek
Vietnamese
Volapuk
Wolof
Xhosa
Yoruba
Zulu

LIMITED WARRANTY

CONSUMER VIDEO 1-90

Authorized Service Centers
®

JVC COMPANY OF AMERICA warrants this product and all parts thereof, except as set forth below ONLY TO THE
ORIGINAL PURCHASER AT RETAIL to be FREE FROM DEFECTIVE MATERIALS AND WORKMANSHIP from the date
of original retail purchase for the period as shown below. ("The Warranty Period")
PARTS

LABOR
YR

HOW TO LOCATE YOUR JVC SERVICE CENTER

DAYS

TOLL FREE: 1 (800) 537-5722

THIS LIMITED WARRANTY IS VALID ONLY IN THE FIFTY (50) UNITED STATES, THE DISTRICT OF COLUMBIA AND
IN COMMONWEALTH OF PUERTO RICO.
WHAT WE WILL DO:
If this product is found to be defective, JVC will repair or replace defective parts at no charge to the original owner.
Such repair and replacement services shall be rendered by JVC during normal business hours at JVC authorized service
centers. Parts used for replacement are warranted only for the remainder of the Warranty Period. All products and parts
thereof may be brought to a JVC authorized service center on a carry-in basis except for Television sets having a screen
size 25 inches and above which are covered on an in-home basis.
WHAT YOU MUST DO FOR WARRANTY SERVICE:
Return your product to a JVC authorized service center with a copy of your bill of sale. For your nearest JVC authorized
service center, please call toll free: (800) 537-5722.
If service is not available locally, box the product carefully, preferably in the original carton, and ship, insured, with
a copy of your bill of sale plus a letter of explanation of the problem to the nearest JVC Factory Service Center, the
name and location of which will be given to you by the toll-free number.
If you have any questions concerning your JVC Product, please contact our Customer Relations Department.
WHAT IS NOT COVERED:
This limited warranty provided by JVC does not cover:
1. Products which have been subject to abuse, accident, alteration, modification, tampering, negligence, misuse, faulty
installation, lack of reasonable care, or if repaired or serviced by anyone other than a service facility authorized by
JVC to render such service, or if affixed to any attachment not provided with the products, or if the model number
or serial number has been altered, tampered with, defaced or removed;
2. Initial installation and installation and removal for repair;
3. Operational adjustments covered in the Owner's Manual, normal maintenance, video and audio head cleaning;
4. Damage that occurs in shipment, due to act of God, and cosmetic damage;
5. Signal reception problems and failures due to line power surge;
6. Video Pick-up Tubes/CCD Image Sensor, Cartridge, Stylus (Needle) are covered for 90 days from the date of purchase;
7. Accessories;
8. Batteries (except that Rechargeable Batteries are covered for 90 days from the date of purchase);

SERVICE

QUALITY

http://www.jvc.com
Dear Customer,
In order to receive the most satisfaction from your purchase,please read the instruction booklet before
operating the unit.In the event that repairs are necessary, please call 1 (800)537-5722 for your nearest
authorized servicer or visit our website at www.JVC.com
Remember to retain your Bill of Sale for Warranty Service.

Do not service the television yourself
Caution
To prevent electrical shock,do not open the cabinet.There are no user serviceable
parts inside.Please refer to qualified service personnel for repairs.
Accessories
To purchase accessories for your JVC product,please call toll free:1 (800)882-2345 or
on the web at www.JVC.com
BT-51005-5
(0301)

Specifications Specifications and appearance are subject to change without prior notice.

There are no express warranties except as listed above.
THE DURATION OF ANY IMPLIED WARRANTIES, INCLUDING THE IMPLIED WARRANTY OF MERCHANTABILITY, IS
LIMITED TO THE DURATION OF THE EXPRESS WARRANTY HEREIN.
JVC SHALL NOT BE LIABLE FOR THE LOSS OF USE OF THE PRODUCT, INCONVENIENCE, LOSS OR ANY OTHER
DAMAGES, WHETHER DIRECT, INCIDENTAL OR CONSEQUENTIAL (INCLUDING, WITHOUT LIMITATION, DAMAGE
TO TAPES, RECORDS OR DISCS) RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH
OF THIS WARRANTY. ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR PARTICULAR PURPOSE, ARE LIMITED TO THE WARRANTY PERIOD SET FORTH ABOVE.
Some states do not allow the exclusion of incidental or consequential damages or limitations on how long an
implied warranty lasts, so these limitations or exclusions may not apply to you. This warranty gives you specific
legal rights and you may also have other rights which vary from state to state.
1700 Valley Road
Wayne, NJ 07470

JVC COMPANY OF AMERICA
DIVISION OF JVC AMERICAS CORP.

REFURBISHED PRODUCTS CARRY A SEPARATE WARRANTY, THIS WARRANTY DOES NOT APPLY. FOR DETAILS OF
REFURBISHED PRODUCT WARRANTY, PLEASE REFER TO THE REFURBISHED PRODUCT WARRANTY INFORMATION
PACKAGED WITH EACH REFURBISHED PRODUCT.
For customer use:
Enter below the Model No. which is located either on the rear, bottom or side of the cabinet. Retain this information
for future reference.
Model No. :

Serial No. :

Purchase data :

Name of dealer :

General

Audio outputs

ANALOG OUT (pin jack): 2.0 Vrms (10 kΩ)
DIGITAL OUT (COAXIAL): 0.5 Vp-p (75 Ω termination)

Readable discs:
DVD VIDEO, DVD-R (Video format), DVD-RW (Video
format), SVCD, Video CD, Audio CD (CD-DA),
CD-R/RW (CD-DA, SVCD, Video CD, MP3 format,
JPEG, MPEG-4)
Video format: NTSC, 480i/480p selectable

Audio characteristics
Frequency response
CD (sampling frequency 44.1 kHz): 2 Hz to 20 kHz
DVD (sampling frequency 48 kHz):
2 Hz to 22 kHz(4 Hz to 20 kHz for DTS and Dolby
Digital bitstream signals)
DVD (sampling frequency 96 kHz): 2 Hz to 44 kHz
Dynamic range
16 bit:
More than 98 dB
20 bit/24 bit: More than 100 dB
Wow and flutter: Unmeasurable (less than ± 0.002%)
Total harmonic distortion: less than 0.009%

Other
Power requirements: AC 120 V
, 60 Hz
Power consumption:
10.0 W (POWER ON), 2.0 W (STANDBY mode)
Mass: 1.6 kg (3.6 lbs)
Dimensions (W x H x D):
435 mm x 44 mm x 201 mm (17-3/16 inch x 1-3/4
inch x 7-15/16 inch)

Video outputs
COMPONENT (pin jacks)
Y Output:
1.0 Vp-p (75 Ω)
PB/PR Output: 0.7 Vp-p (75 Ω)
VIDEO OUT (pin jack): 1.0 Vp-p (75 Ω)
S-VIDEO OUT (S jack)
Y Output: 1.0 Vp-p (75 Ω)
C Output: 286 mVp-p (75 Ω)
Horizontal resolution: 500 lines or more

* Notes for PX model (Check the specification
indication on the rear panel.)
Power requirements: AC 110 V to 240 V
, 50 Hz/60 Hz
Power consumption: 11.0 W (POWER ON),
2.0 W (STANDBY mode)

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
Encryption                      : Standard V1.2 (40-bit)
User Access                     : Print, Fill forms, Extract, Assemble, Print high-res
Create Date                     : 2004:08:20 02:54:48Z
Modify Date                     : 2004:08:24 16:42:17+09:00
Subject                         : GNT0057-001A
Page Count                      : 2
Creation Date                   : 2004:08:20 02:54:48Z
Mod Date                        : 2004:08:24 16:42:17+09:00
Producer                        : Acrobat Distiller 5.0.1 for Macintosh
Author                          : JVC
Metadata Date                   : 2004:08:24 16:42:17+09:00
Creator                         : JVC
Title                           : XV-N210B/XV-N212S
Description                     : GNT0057-001A

EXIF Metadata provided by EXIF.tools

JVC XV N212S N210B/XV User Manual GNT0057 001A

XV-N210B XV-N210B, XV-N212S GNT0057-001A English,

Navigation menu

Versions of this User Manual:

Views

Navigation