Jam MLP1-RP MARSHALL RECORD PLAYER User Manual jtm33 manual

Jam Industries Ltd MARSHALL RECORD PLAYER jtm33 manual

User Manual

Model: MLP1-RP
IMPORTANT SAFETY INSTRUCTIONS1. Read these instructions carefully.2. Keep these instructions for later reference.3. Heed all warning.4. Follow all instructions.5. Do not use the device near water.6. Clean only with a dry cloth.7. Do not block any ventilation openings. Always ensure a sufficient ventilation. Install in accordance with the manufacturer’s instructions.8. Do not install near any heat sources such as radiators, heat registers, stoves, or other devices (including amplifiers) that produce or radiate heat.9. Do not defeat the safety purpose of the polarized or grounding-type plug. A grounding-type plug has two blades, one being wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.11. Only use attachments/accessories that have been specified by the manufacturer.12. Use only with a cart, stand, tripod, bracket or table specified by manufacturer, or sold along with the device. When a cart is used, use caution when moving the cart/device combination to avoid injury for tip-over.13. Unplug this device during lightning storms or when not being used for a longer periods of time.14. Refer all servicing to qualified service personnel only. Servicing is required when the device has been damaged in any way, such as: Power supply cord or plug has been damaged, liquid has been spilled or entered the device, the device has been exposed to rain or moisture, or objects have fallen into the device, the device does not work normally, or it has been dropped.15. Please keep the unit in a good ventilation environment at any time.
PRODUCT DESCRIPTION1. Speaker 2. Power Button3. Volume Knob4. Bass Knob5. Midrange Knob6. Treble Knob7. Function Knob8. Headphone Jack9. Input Jack10. 45 RPM Adapter11. Counterweight 12. Tonearm Lever13. Tonearm Rest14. Tonearm15. Speed Knob16. Pitch Control Knob17. Headshell and Cartridge18. Turntable Platter19. Power Jack20. Line Out Jack21. USB Charging PortITEMS IN THE PACKAGE Please check thoroughly and make sure you find the following items that come along with this package: • Turntable • Turntable Mat • Turntable Platter (with belt)• Tonearm Counterweight • 45 RPM Adaptor• Power Adaptor (including EU-UK-US Interchangeable plugs)• RCA-RAC CableRetain the original packaging materials for exchange or return purposes.
SETUP & ASSEMBLY Some assembly required before you can begin to use your new unit. Please follow the assembly instruction below before attempting to use your new turntable.PRECAUTIONS ON PLACEMENT: 1.Do not place the unit in a location where it will be exposed to direct sunlight or near any type of heating appliance.2.Do not place the unit in a location where there is high humidity or a lot of dust.3.Install this unit on a horizontal surface that is stable and vibration free.4.The rubber feet have been specially designed to isolate the unit from excess vibration. The feet may also be used to stabilize the main body horizontally.ASSEMBLY 1.Remove the main unit with the packing from the box and remove the packing. 2.Set the platter onto the spindle and make sure that the platter is fully seated on the spindle.Make sure that the belt does not get twisted. 5.Set the slip mat on the platter.6.Slide counterweight (same for both side)onto tonearm until the counterweight was locked by the spring piece.Note: a. The countweight was designed and fitted according tocartridge by factory, it is no necessary for user to adjust the Down force.b. In case it is necessary to take off the countweight, please press the spring piece by finger unit the countweight can be moved, then push the countweight out.7.Connect AC adapter to the power jack of the unit.Note: a. Do not plug AC power adapter to power outlet before all the assembly is completed.b. Do not remove the twist tie for clamping the tonearm until assembly is completed.3.Rotate the platter until you see the drive motor pulley through the window.4. Carefully grab the drive belt and put it around the slot of motor pulley.
BLUETOOTH OPERATIONThis unit has a Bluetooth transmitter to send audio to a Bluetoothspeaker wirelessly.1. Power on your Bluetooth speaker and ensure it is in pairing mode.2. Power on the unit, the BT will auto search when the unit turn on,3. When paired , the light will be on. Play the music from the unit to your device Note: This unit will connect to the closest Bluetooth speaker that is near it.If after 2 minutes no Bluetooth speaker can be found to pair with, the Bluetooth transmitter will become inactive.4.To disconnect pairing, power off the turntable or turn off Bluetooth pairing on your Bluetooth speaker. PHONO OPERATION1. Rotate the FUNCTIONS KNOB to select PHONO mode.2. Set the SPEED CONTROL KNOB to desired speed (33 1/3,45,78 rpm). Place the record on the turntable.Remark: Place the 45 RPM adapter over the spindle if you play the 45 rpm records.3. Remove the stylus cover from the stylus.4.Unlock the tonearm lock and push the TONEARM LEVER to raise the tone arm off its rest. Pull the TONE ARM gently to the left, the turntable will star turning.5. Move the TONE ARM over the record and push the TONEARM LEVER to lower it to the point you want the record to start. 6. Adjust the VOLUME knob to the desired sound level.Note:a.At the end of the record, you must return the TONE ARM to rest by handb.During playback, keep your hands away from the tonearm and the turning vinyl record.c.During playback, do not stop the rotation of the platter by hand.PITCH CONTROLThe turntable speed can be increased or decreased by approximately 10% by rotating the Pitch Control Knob. To increase the speed, turn the Pitch Control Knob clockwise. To decrease the speed, turn the knob counter-clockwise.
LINE OUT CONNECTIONThis system includes a set of LINE OUT sockets(L/R) which allow you to record from the Radio or phonograph of this system to an external recording device such as a cassette recorder. Mini-Disc, etc. In any play mode, insert the audio cable (not include) into the matching”LINE OUT” socket of the unit, operate the unit as usual, and through the speakers of external device. You can hear the sound from the unit..HEADPHONE OPERATION1. Connect a headphone to the HEADPHONE JACK.2. Adjust VOLUME KNOB to the desired levelNOTE: a. When using headphone, the sound of the unit speakers will be cut off.b. Headphones is not included with unit.USB CHARGING OPERATION1.The output DC voltage of the USB port of the unit is 5V. To use this unit power bank feature, use the USB cable (not include) to connect your mobile device and the unit.2.Turn on the power of the unit and it will start charging your device.AUX IN OPERATION1. Rotate the FUNCTIONS KNOB to select AUX mode. 2. Plug the auxiliary cable into AUX IN JACK on the front panel of the unit.3. Plug the other end of auxiliary cable into the external devices.4. Play the external devices as you normally do and the playback will be played from the unit
SPECIFICATION 1.PRODUCT Belt-Drive Turntable 2.GENERAL SECTIONPower Supply DC12V，2.0A Dimensions 421(W) x 431(D) x 181(H) mm Consumption 20 W 3.TURNTABLE SECTIONMotor DC motorDriving Method Belt driveSpeeds 331/3 / 45/78 rpm4.ACCESSORIES SUPPLIED Instruction manual x 1 Warranty x145 rpm adaptor x 12P RCA Cord x 1Counter weight x 1Power Adapter x 1Platter x1 Slipmat x15. TECHNICAL SPECIFICATIONS: AT-3600L (audio-technica)Frequency response 20Hz-20kHz Recommended load resistance 47kohmsChannel balance ＜2.5dB Amplifier connection MM - input Channel separation ＞18dB Recommended tracking force 3.5±0.5gOutput voltage 2.5mV Weight 5gNote: Design and specifications are subject to change without notice.
FCC & IC STATEMENTS NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:- Reorient or relocate the receiving antenna.- Increase the separation between the equipment and receiver.-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.-Consult the dealer or an experienced radio/TV technician for helpChanges or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part15 of the FCC Rules. Operation is subject to the following two conditions:(1) this device may not cause harmful interference, and(2) this device must accept any interference received, including interference that may cause undesired operation.This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1)this device may not cause interference(2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables auxappareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes :(1) l'appareil ne doit pas produire de brouillage, et(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre lefonctionnement.This equipment should be installed and operated with a minumum distanceof 20 cm between the radiator and your body.This equipment should be installed and operated with a minumum distanceof 20 cm between the radiator and your body.Cet équipement doit être installé et utilisé à une distance minimale de 20 cmentre le radiateur et votre corps.

Navigation menu