Janam Technologies XM6X HANDHELD COMPUTER TYPE BARCODE SCANNER User Manual

Janam Technologies LLC HANDHELD COMPUTER TYPE BARCODE SCANNER Users Manual

a href="https://usermanual.wiki/Janam-Technologies" itemprop="url"> Janam Technologies >

Users Manual

XM Series Quick Start Guide™Copyright 2009 Janam Technologies LLC. All rights reserved.XM Series Quick Start GuideXM Series, Janam and the Janam logo are trademarks of Janam Technologies LLC. Other product and brand names may be trademarks or registered trademarks of their respective owners.Janam Technologies LLC assumes no responsibility for any damage or loss resulting from the use of this guide. Janam Technologies LLC assumes no responsibility for any loss or claims by third parties which may arise through the use of this product. Janam Technologies LLC assumes no responsibility for any damage or loss caused by deletion of data as a result of malfunction, dead battery or repairs. To protect against data loss, be sure to make backup copies (on other media) of all important data.Follow all usage, charging and maintenance guidelines in the Product User Guide. If you have questions, contact Janam. For a copy of the Product User Guide, visit the Resource Center at www.janam.com.Important: Please read the End User License Agreement for this product before using the device or the accompanying software program(s). Using the device or any part of the software indicates that you accept the terms of the End User License Agreement.Content and Additional ResourcesTo help you get started with your XM Series mobile computer, this guide features:- Hardware Overview- Installing and Charging the Battery- Getting StartedContents of this guide are subject to change. For the most current version of this guide and additional product details visit, www.janam.com.For software updates and information, visit www.microsoft.com.XM Series Quick Start GuideJanam Technologies LLC051209XMminiQSG6Technology at Work.®Page 1Page 2www.janam.comTechnology at Work.®
Hardware OverviewGetting StartedHardware OverviewA. INSTALLING THE BATTERY1. To access the battery compartment, turn the battery screw counterclockwise to open the latch and remove battery cover.2. Position the battery-lift strap, place the Lithium-ion battery and snap into place.3. Replacethebatterycoverbypositioningthetopprongsrstandslidingcoverintoplace. Tighten battery screw by turning clockwise.B. CHARGING THE BATTERYImportant Note: The main battery charges the backup battery in the XM Series unit. Once the main battery is fully charged, do not remove it from the unit for 24 hours. During this period the device cannot maintain any user data if the battery is removed.To charge the battery using the USB Synching/Charging Cable or Serial Synching/Charging Cable:a. Connect the power supply to the USB or Serial Synching/Charging cable.b. Connect snap-on end of USB or Serial Synching/Charging cable to bottom of device making sure the word “TOP” on the connector faces front.c. Plug in the power supply. Use only easily accessible wall outlets that are easily reached with the length of supplied power cable.To charge the battery using the Single-Slot or Four-Slot Cradle:a. Connect the power supply to the cradle.b. Connect the line cord to the power supply.c. Plug in the power supply. Use only easily accessible wall outlets that are easily reached with the length of supplied power cable.d. Placethedeviceincradle.TheLEDonthedevicewillilluminatetoconrmconnection(orangeindicatescharging, green indicates fully charged and red indicates fault).e. The battery is fully charged in approximately 2 hours.f. Charge a spare battery by placing the battery in the spare battery well with label up and connectors lined up.Installing and Charging the BatteryA. CALIBRATING THE SCREENThersttimethedeviceisturnedon,theWelcomeUtilityappears.Tosetupthedevice,followtheon-screen instructions using the stylus to tap the exact center of each targetNote:IfyourXMSeriesdevicecamepre-loadedwithacustomsoftwareapplication,theWelcomeUtilitymay not appear.B. ATTACHING THE HANDSTRAP Toattachthehandstrap,rstalignthetwoholesinthemetalhandstrapanchoratthetwohandstrapscrewports. Then, for each side, place one of the screws provided into a lined up screw hole/screw port and turn clockwise. Secure both sides before fully tightening down the screws. Separate velcro to extend the handstrap and feed loose end through the handstrap bar. Fasten velcro together to close the strap. Fit strap and secure device to user’s hand by adjusting velcro as needed.Janam Technologies LLCXM Series Quick Start GuidePage 4 Page 6Page 3Page 5589647101231211 13151614111. Power2. Indicator LED3. LCD4. Connector5. Scan Trigger6. Right Trigger7. Left Trigger8. Navigation9. Home10. Enter11. Programmable12. Function Shift13. Backspace14. Alpha/Numeric Shift15. Space16. Shift742356891Battery Compartment1. Battery Door2. Battery Screw3. Reset4. Microphone5. Speaker6. IrDAWindow7. Stylus8. Stylus Slot9. Lanyard Connector10. Handstrap Screw Port11. Handstrap Bar1011
XM Series Regulatory Information™XM Series Regulatory InformationXM Series Regulatory InformationJanam Technologies LLC062609XMminiREG.5Technology at Work.®The CE Mark on the product indicates that the system has been tested to and conforms with the provisions noted within the 89/336/EEC Electromagnetic Compatibility Directive.For further information, please contact:Janam Technologies LLC100 Crossways Park West, Suite 105Woodbury, NY 11797Janam Technologies shall not be liable for use of our product with equipment (i.e., power supplies, personal computers, etc.) that is not CE marked and does not comply with the Low Voltage Directive.FCC and Canadian ComplianceXM Series mobile computers meet or exceed all applicable standards and have been manufactured to the highest level of quality. To see the specic labels associated with RF terminals congurations, visit www.janam.com.Warning: Changes or modications to this unit not expressly approved by the party responsible for compliance could void the user authority to operate the equipment.XM Series Batch TerminalRegulatory and Safety ApprovalsParameter SpecicationU.S.A. FCC Part 15 Subpart BCanada ICES-003 Issue 4European Community EN55022:1998+A1: 2000+A2:2003 EN55024:1998+A1: 2000+A2:2003Australia AS/NZS CISPR 22:2004This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.www.janam.comTechnology at Work.®Copyright 2009 Janam Technologies LLC. All rights reserved.XM Series, Janam and the Janam logo are trademarks of Janam Technologies LLC. Other product and brand names may be trademarks or registered trademarks of their respective owners.Janam Technologies LLC assumes no responsibility for any damage or loss resulting from the use of this guide. Janam Technologies LLC assumes no responsibility for any loss or claims by third parties which may arise through the use of this product. Janam Technologies LLC assumes no responsibility for any damage or loss caused by deletion of data as a result of malfunction, dead battery or repairs. Be sure to make backup copies of all important data on other media to protect against data loss.Follow all usage, charging and maintenance guidelines in the Product User Guide. If you have questions, contact Janam. For a copy of the Product User Guide, visit the online Resource Center at www.janam.com.Important: Please read the End User License Agreement with this product before using the device or accompanying software program(s). Using the device or any part of the software indicates that you accept the terms of the End User License Agreement.For additional product information, visit www.janam.com or call +1.877.JANAM.99Page 1Page 2
Download:
Mirror Download [FCC.gov]
Document ID1153899
Application IDCKUPkjZ5pwzZgAFrxGXq5A==
Document DescriptionUsers Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize39.93kB (499063 bits)
Date Submitted2009-08-14 00:00:00
Date Available2009-08-17 00:00:00
Creation Date2009-06-30 15:01:19
Producing SoftwareAdobe PDF Library 8.0
Document Lastmod2009-06-30 15:01:23
Document TitleUsers Manual
Document CreatorAdobe InDesign CS3 (5.0.2)
FCC ID Filing: UTWXM6X

Navigation menu