Janam Technologies XT2WA Mobile Computer User Manual HT K10 Manual Toshiba page1 130103

Janam Technologies LLC Mobile Computer HT K10 Manual Toshiba page1 130103

User Manual

HANDHELD TERMINALQuick start guideXT2WAFrontPackage contents Device layoutDeviceStylus pen with TetherAC/DC Adaptor (AC plug)BatteryWrist StrapLCD protection filmTouch ScreenScan keyFront cameraDevice layoutUp/down & sides I/O ConnectorExit windowDevice layoutScan keyPower keyVolume Up/DownLED indicatorHeadset jackBackMSRBattery cover lockBattery coverSpeakerCamera & FlashlightMenu keysDC socketMenu keys Installing battery1. Rotate lock to counter clockwise and pull up the battery cover by holding both sides at bottom. 3. Hold the ribbon and lift upward to remove batteryFunction keyRecents key• Tap to open the list of recent apps.Home key • Press to return to the Home screen while running apps• Press to return to the Home screen from other screens• Press and hold to launch internetBack key • Tab to return to the previous screen or to close current screen (dialog box, option menu, notification panel, etc)Function key • Press to set functions on keys• Press to create shortcut of programs 2. Insert battery, top first, into the battery compartment.4. Insert battery cover,top first and press it in the order named on the picture. Then press down on battery at the center again.Back keyHome keyRecents keyRemoving battery•Please read this manual before using the device and follow the instructions correctly.•Some content may differ from your device depending on the device’s software version.
Installing/ Removing Micro SD card Standard accessoryInstalling Micro SD card1. Remove battery from device and insert Micro SD card.2. Insert battery again after installing Micro SD card.Removing Micro SD card1. Press Micro SD card gently and slide it out.2. Remove Micro SD card from device.3. Insert battery again.<Caution>•Micro SD card is not standard/optional accessory. Do purchase it from distributor.•Device supports storage extension upto 32GB with Micro SD card.•Turn off the device before removing battery.Charging the battery•Due to installing/ removing battery, save the working data first and then install or remove Micro SD card. 1. Insert plug on AC/DC Adaptor and connect to electric socket to charge.2. LED indicator on upper left of device shows red light while charging and it turns to green light when the device is fully charged. <Caution> •Use only items provided in your purchase for charging.•You can also charge the device with optional accessory, cradle.5V 2A AC/DC AdaptorWrist StrapStylus pen with TetherBattery (3000mAh)AC plug(US/EU/UK)LCD protection filmOptional accessarySSC(Single Slot Cradle) 4SC(4 Slot Cradle)4SBC(4 Slot Battery Charger)PUSHI/O USB Sync cable Extended Battery(4000mA)Getting StartedTurning the device on and offOn- Press power key on upper right of device to turn on.After few seconds, device will turn on.Off- Press and hold power key for a while till you and tap power off on the screen options.Home screen itemsPoint the scanning beam at the center of barcode andkeep scanning angle vertical to it.Scanning range varies according to bar code size sokeep minimum distance for small barcode and furtherdistance for bigger one.ScanningStatus bar• Displays status/notification• Tap and drag down to show notification panelGood: Well aimedSo so: aimed a bit below but still readablePoor: aimed a bit one sided but still readable.Bad: aimed diagonal, cannot readBad: aimed too one sided to read, cannot readBad: aimed vertical, cannot readScanning: aiming patternStart with setting language input, google account, GPS, etc when the device is on for the first time.Device works without SIM card and device functions are available through WLAN network connection and google account registration.Set upBrowser barTab and google search by textTab and google search by voice12Home screen• Tab and slide right/left to go other screens• Tab icons to open applications/ foldersFavorites shortcut•Press and hold to set/move applicationsOpens apps windowScanningEnable/ disable Scan Wedge1. Tab status bar on the top and drag to open notification panel.2. Tab Scan Wedge to enable/ disable scanner.3 If Scan Wedge is set disabled, scanner is at same status.Enabled scanner icon1. Execute Demos application on home screen.2. Tab ScanDemo to open. 3. Press both scan keys at once or any of scan key on the device to scan barcode.4. Scanned barcode data will show on screen as on the picture left.Testing barcode scanner
Wireless Specification (Frequency)WLAN•802.11b/g/n : 2412~2472MHz•802.11a/n: 5180~5240, 5260~5320, 5500~5620,5745~5805MHzBluetooth• 1~3Mbps: 2402~2480MHz•LE: 2402~2480MHzGSM•GSM850 : 824~849MHz(TX), 869~894MHz(RX)•GSM900 : 880~915MHz(TX), 925~960MHz(RX)•DCS1800 : 1715~1785MHz(TX), 1810~1880MHz(RX)•PCS1900 : 1850~1910MHz(TX), 1930~1990MHz(RX)WCDMA•B1 : 1920~1980MHz(TX), 2110~2170MHz(RX)•B2 : 1850~1910MHz(TX), 1930~1990MHz(RX)•B4 : 1710~1755MHz(TX), 2110~2155MHz(RX)•B5 : 824~849MHz(TX), 869~894MHz(RX)•B8 : 880~915MHz(TX), 925~960MHz(RX)LTE•B2 : 1850~1910MHz(TX), 1930~1990MHz(RX)•B3 : 1715~1785MHz(TX), 1810~1880MHz(RX)•B4 : 1710~1755MHz(TX), 2110~2155MHz(RX)•B5 : 824~849MHz(TX), 869~894MHz(RX)•B13 : 777~787MHz(TX), 746~756MHz(RX)•B17 : 704~716MHz(TX), 734~746MHz(RX)Resetting the deviceRebootPress and hold power key for 3 seconds and select Reboot on options to reboot the device.Factory resetFollow the process by tapping next button to complete factory reset.<Caution>•Back up all data - personal, application settings,account information and etc. before performing factoryreset as it causes all data delete.Setting the date and timeGo to below route to set date and time.Access to above route and alter the following settings according to user’s decision.•Set date•Set time•Select time zone•Use 24-hour format•Select date formatOfflineTel: 02-3397-7870Fax: 02-3397-7872Address: 100 Crossways Park Drive West, Suite 105, Woodbury, NY 11797 USAOnlineWebsite: http://www.janam.comE-mail: inquiries@janam.comUser guides supports detailed information on safety & regulations of device and accessories.Due to the possibility of electric wave interference by device, no support on life safety.Technical support & A/SUser guidesCertificationEquipment name: Mobile ComputerModel: XT2WATrade name of certified: Janam Technology LLC. Manufacturer/ Country of origin: Janam Technology LLC. Production date: 2016.XX.XXFCC ID: UTWXT2WAIC ID: 6914A-XT2WAConnecting USB data Sync cableConnect to PC and transfer data in Micro SD card/ device storage with I/O USB data Sync cable.Connecting –connect USB cable to USB port of PC and I/O connector.–Tab media device connection on notification panelof status bar.–Select file transfer on pop up window.Disconnecting –Tab to show notification panel and select media device connection.–Select media device (MTP) and disable theconnection.Connecting to PCSettings -> back up and reset -> Factory reset -> Reset phoneSettings -> Date and time -> Uncheck automatic date & time,Uncheck automatic time zoneStandard featuresItemSpecificationsModelXT2WAOperatingSystemAndroid 5.X or higher(GMS/CTScertified)SoftwareToolsand DemosMicro-ProcessorQualcomm8916 1.4GHz Quad CoreMemory2GB RAM X 16GB FlashMemoryextensionUseraccessible Micro SD memory card slot.Display5.0”Wideviewing angle IPS(1280 X720 pixels)Data captureoptions2D engine : SE4710KeypadTouchscreen & Front 4 hard keysAudioBuilt-in microphone and speakerI/OHighspeed USB 2.0 from cradle (or I/O cable)Weight279g / 293g(MSR model) with batteryWifi802.11 a/b/g/n(Up to 150Mbps)BluetoothBluetoothv4.x, class2UMTS/ HSPDA/HSUPAGSM:850/900/1800/1900(MHz)WCDMA: BAND1, 2, 4, 5, 8LTE: FDD2, 3, 4, 5, 13,17NFC/RFID13.5593MHzSerial(RS232C)9600bps,19.2kpbs,38.4kbps,57.6kbps,115.2kbpsUSBUSBHS 2.0 OTG Support via I/O connectorBatteryLi-ion battery 3.8V / 3000 mAh / 11.4 WhAdaptorOutput: 5V / 2A, Input: 100-240V~50/60Hz 0.4ACharger5V input through DC port.BatteryCapacity: 3000mAh –Less than 4hrs.Operatingtemperature-20ºC ~ 60ºCRain/dustprotectionIP67Li-ion battery follows varied regulations in each region/ country. Accordingly, recycle or disuse li-ion battery properly. Do not leave or store it in fire or heat it or disassemble or short circuit it.Prevent plug and consent from dust and dirt to keep them clean. Improper storing or misuse may cause fire, electric shock, etc.WarningDo not allow any strong pressure or impact on thetouch screen. Do not touch any interior liquid fromLCD panel breakage that may cause skin irritation.Use only approved AC/DC power adaptor provided with device or from distributor.Disapproved products may cause unexpected problems as fire, electric shock, etc.Disapproved modification or repair is not guaranteed. Inquire to distributor for any troubleshooting.HANDY TERMINALQuick start guideXT2WA•For more details of product information and userguide, please refer to our website (www.Janam.com)Allowed to use in all area.Please use the device at 1 cm or more distance away from your body.
Certificate & RegulatoryFCCAllowed to use in all area. Please use the device at 1 cm or more distance away from your body.This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device has been tested andfound to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residentialinstallation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turningthe equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:-Reorient or relocate the receiving antenna.-Increase the separation between the equipment and receiver.-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.-Consult the dealer or an experienced radio/TV technician for help.ICCanadian Compliance This radio transmitter has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain and required antenna impedance for each antenna type indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropicallyradiated power (e.i.r.p) is not more than that necessary for successful communication. This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1)this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.Le présent émetteur radio a été approuvé par Industrie Canada pour fonctionner avec les types d'antenne énumérés ci-dessous et ayant un gain admissible maximal et l'impédance requise pour chaque typed'antenne. Les types d'antenne non inclus dans cette liste, ou dont le gain est supérieur au gain maximal indiqué, sont strictement interdits pour l'exploitation de l'émetteur.Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peut fonctionner avec une antenne d'un type et d'un gain maximal (ou inférieur)approuvé pour l'émetteur par Industrie Canada. Dans le but de réduire les risques de brouillage radioélectrique à l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que lapuissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas l'intensité nécessaire à l'établissement d'une communication satisfaisante.Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.L'exploitation est autorisée aux deux conditions suivantes :(1)l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.CE markingCAUTION! This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made. IC RF Exposure Statement NII frequency band 5150-5250 MHz is restricted to indoor use only.

Navigation menu