Janam Technologies XT2WA Mobile Computer User Manual HT K10 Manual Toshiba page1 130103

Download:
Mirror Download [FCC.gov]
Document ID	2964584
Application ID	Hgd3ql+yNTpeZWb/ZFaMvg==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	115.91kB (1448829 bits)
Date Submitted	2016-04-20 00:00:00
Date Available	2016-10-17 00:00:00
Creation Date	2016-03-23 10:19:47
Document Lastmod	2016-04-11 11:02:44
Document Title	HT-K10 Manual-Toshiba_page1_130103
Document Author:	cgt

Package contents
Device layout
Front
Device layout
Device layout
Back
Up/down & sides
Front camera
I/O Connector
MSR
DC socket
LED indicator
Speaker
Exit window
Device
Touch Screen
Stylus pen with Tether
Scan key
Camera & Flashlight
AC/DC Adaptor (AC plug)
Battery cover
Battery
Volume Up/Down
Wrist Strap
Headset jack
Power key
LCD protection film
Scan key
Battery cover lock
Menu keys
Installing battery
Menu keys
Removing battery
HANDHELD TERMINAL
Quick start guide
XT2WA
Recents key
Home key
Back key
Function key
Recents key
• Tap to open the list of recent apps.
1. Rotate lock to counter clockwise and pull up the
battery cover by holding both sides at bottom.
Home key
• Press to return to the Home screen while running apps
• Press to return to the Home screen from other screens
• Press and hold to launch internet
4. Insert battery cover,
top first and press it
in the order named
on the picture.
Back key
• Tab to return to the previous screen or to close current
screen (dialog box, option menu, notification panel, etc)
•
•
Please read this manual before using the device and
follow the instructions correctly.
Some content may differ from your device depending
on the device’s software version.
3. Hold the ribbon and lift upward to remove battery
Then press down on
battery at the center
again.
Function key
• Press to set functions on keys
• Press to create shortcut of programs
2. Insert battery, top first, into the battery compartment.
Installing/ Removing Micro SD card
Charging the battery
Standard accessory
5V 2A AC/DC Adaptor
Installing Micro SD card
Optional accessary
AC plug(US/EU/UK)
SSC(Single Slot Cradle)
4SC(4 Slot Cradle)
1. Remove battery from
device and insert Micro SD
card.
2. Insert battery again after
installing Micro SD card.
Removing Micro SD
card

•
•
Micro SD card is not
standard/optional
accessory. Do purchase it
from distributor.
Device supports storage
extension upto 32GB with
Micro SD card.
Turn off the device before
removing battery.
Battery (3000mAh)
Stylus pen with Tether
Wrist Strap
4SBC(4 Slot Battery Charger)
1. Press Micro SD card
gently and slide it out.
2. Remove Micro SD card
from device.
3. Insert battery again.
PUSH
•
LCD
protection
film
•
Due to installing/ removing
battery, save the working
data first and then install or
remove Micro SD card.
Getting Started
1. Insert plug on AC/DC Adaptor and connect to electric socket to
charge.
2. LED indicator on upper left of device shows red light while
charging and it turns to green light when the device is fully
charged.
On- Press power key on upper right of device to turn on.
After few seconds, device will turn on.
Off- Press and hold power key for a while till you and
tap power off on the screen options.
Set up
Start with setting language input, google account, GPS,
etc when the device is on for the first time.
Device works without SIM card and device functions
are available through WLAN network connection and
google account registration.
•
•
Use only items provided in your purchase for charging.
You can also charge the device with optional accessory,
cradle.
Scanning
Enable/ disable Scan Wedge
1. Tab status bar on the
top and drag to open
notification panel.
2. Tab Scan Wedge to
enable/ disable scanner.
3 If Scan Wedge is set
disabled, scanner is at
same status.
Testing barcode scanner
1. Execute Demos
application on home
screen.
2. Tab ScanDemo
open.
So so: aimed a bit below
but still readable
to
Point the scanning beam at the center of barcode and
keep scanning angle vertical to it.
Home screen
• Tab and slide right/left to go other screens
• Tab icons to open applications/ folders
Enabled scanner icon
Poor: aimed a bit one sided
but still readable.
3. Press both scan keys
at once or any of scan
key on the device to scan
barcode.
4. Scanned barcode data
will show on screen as on
the picture left.
• Displays status/notification
• Tap and drag down to show notification
panel
Browser bar
1 Tab and google search by text
2 Tab and google search by voice
Opens apps window
Scanning: aiming pattern
Good: Well aimed
Home screen items Status bar
Favorites shortcut
• Press and hold to set/move applications
Extended Battery(4000mA)

Scanning
Turning the device on and off
I/O USB Sync cable
Scanning range varies according to bar code size so
keep minimum distance for small barcode and further
distance for bigger one.
Bad: aimed diagonal,
cannot read
Bad: aimed too one sided
to read, cannot read
Bad: aimed vertical, cannot
read
Resetting the device
Reboot
Setting the date and time
Connecting to PC
Technical support & A/S
Offline
Tel: 02-3397-7870
Fax: 02-3397-7872
Address: 100 Crossways Park Drive West, Suite 105,
Woodbury, NY 11797 USA
Go to below route to set date and time.
Press and hold power key for 3 seconds and select
Reboot on options to reboot the device.
Settings -> back up and reset -> Factory reset ->
Reset phone
Factory reset
Follow the process by tapping next button to complete
factory reset.
Settings -> Date and time -> Uncheck automatic date & time,
Uncheck automatic time zone
Access to above route and alter the following
settings according to user’s decision.
User guides
• Set date
User guides supports detailed information on safety
& regulations of device and accessories.
• Set time
Connecting USB data Sync cable
• Select time zone
• Use 24-hour format

• Back up all data - personal, application settings,
account information and etc. before performing factory
reset as it causes all data delete.
Online
Website: http://www.janam.com
E-mail: inquiries@janam.com
• Select date format
Due to the possibility of electric wave interference
by device, no support on life safety.
Connect to PC and transfer data in Micro SD card/ device
storage with I/O USB data Sync cable.
Certification
Connecting –connect USB cable to USB port of PC and I/O
connector.
– Tab media device connection on notification panel
of status bar.
– Select file transfer on pop up window.
Equipment name: Mobile Computer
Model: XT2WA
Trade name of certified: Janam Technology LLC.
Manufacturer/ Country of origin: Janam Technology LLC.
Production date: 2016.XX.XX
FCC ID: UTWXT2WA
IC ID: 6914A-XT2WA
Disconnecting – Tab to show notification panel and select
media device connection.
– Select media device (MTP) and disable the
connection.
Warning
Standard features
Item
Specifications
Do not allow any strong pressure or impact on the
touch screen. Do not touch any interior liquid from
LCD panel breakage that may cause skin irritation.
Model
Operating
System
Software
XT2WA
Use only approved AC/DC power adaptor
provided with device or from distributor.
Disapproved products may cause unexpected
problems as fire, electric shock, etc.
Micro-Processor Qualcomm 8916 1.4GHz Quad Core
Disapproved modification or repair is not
guaranteed. Inquire to distributor for any
troubleshooting.
Li-ion battery follows varied regulations in each
region/ country. Accordingly, recycle or disuse li-ion
battery properly. Do not leave or store it in fire or
heat it or disassemble or short circuit it.
Prevent plug and consent from dust and dirt to
keep them clean. Improper storing or misuse may
cause fire, electric shock, etc.
Android 5.X or higher(GMS/CTS certified)
Tools and Demos
Memory
Memory
extension
Display
Data
capture
options
Keypad
2GB RAM X 16GB Flash
Audio
Built-in microphone and speaker
User accessible Micro SD memory card slot.
5.0” Wideviewing angle IPS(1280 X 720 pixels)
2D engine : SE4710
Touch screen & Front 4 hard keys
I/O
Weight
Wifi
Bluetooth
High speed USB 2.0 from cradle (or I/O cable)
279g / 293g(MSR model) with battery
802.11 a/b/g/n(Up to 150Mbps)
Bluetooth v4.x, class2
GSM: 850/900/1800/1900(MHz)
UMTS / HSPDA /
WCDMA: BAND1, 2, 4, 5, 8
HSUPA
LTE : FDD2, 3, 4, 5, 13, 17
13.5593MHz
NFC/RFID
Serial(RS232C)
9600bps,19.2kpbs,38.4kbps,57.6kbps,115.2kbps
USB
USB HS 2.0 OTG Support via I/O connector
Battery
Li-ion battery 3.8V / 3000 mAh / 11.4 Wh
Adaptor
Output: 5V / 2A, Input: 100-240V~50/60Hz 0.4A
Charger
Battery
Operating
temperature
Rain/dust
protection
5V input through DC port.
Capacity: 3000mAh – Less than 4hrs.
-20ºC ~ 60ºC
IP67
Wireless Specification (Frequency)
WLAN
• 802.11b/g/n : 2412~2472MHz
• 802.11a/n: 5180~5240, 5260~5320, 5500~5620,
5745~5805MHz
Bluetooth
• 1~3Mbps: 2402~2480MHz
• LE: 2402~2480MHz
GSM
• GSM850 : 824~849MHz(TX), 869~894MHz(RX)
• GSM900 : 880~915MHz(TX), 925~960MHz(RX)
• DCS1800 : 1715~1785MHz(TX), 1810~1880MHz(RX)
• PCS1900 : 1850~1910MHz(TX), 1930~1990MHz(RX)
HANDY TERMINAL
Quick start guide
XT2WA
WCDMA
• B1 : 1920~1980MHz(TX), 2110~2170MHz(RX)
• B2 : 1850~1910MHz(TX), 1930~1990MHz(RX)
• B4 : 1710~1755MHz(TX), 2110~2155MHz(RX)
• B5 : 824~849MHz(TX), 869~894MHz(RX)
• B8 : 880~915MHz(TX), 925~960MHz(RX)
LTE
• B2 : 1850~1910MHz(TX), 1930~1990MHz(RX)
• B3 : 1715~1785MHz(TX), 1810~1880MHz(RX)
• B4 : 1710~1755MHz(TX), 2110~2155MHz(RX)
• B5 : 824~849MHz(TX), 869~894MHz(RX)
• B13 : 777~787MHz(TX), 746~756MHz(RX)
• B17 : 704~716MHz(TX), 734~746MHz(RX)
•
Allowed to use in all area.
Please use the device at 1 cm or more distance
away from your body.
For more details of product information and user
guide, please refer to our website (www.Janam.com)
Certificate & Regulatory
FCC
Allowed to use in all area. Please use the device at 1 cm or more distance away from your body.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device has been tested and
found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
IC
Canadian Compliance
This radio transmitter has been approved by Industry Canada to operate with the antenna types listed below with
the maximum permissible gain and required antenna impedance for each antenna type indicated. Antenna types not included in this list,
having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device.
Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum
(or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically
radiated power (e.i.r.p) is not more than that necessary for successful communication.
This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1)this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
Le présent émetteur radio a été approuvé par Industrie Canada pour fonctionner avec les types d'antenne énumérés ci-dessous et ayant un gain admissible maximal et l'impédance requise pour chaque type
d'antenne. Les types d'antenne non inclus dans cette liste, ou dont le gain est supérieur au gain maximal indiqué, sont strictement interdits pour l'exploitation de l'émetteur.
Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peut fonctionner avec une antenne d'un type et d'un gain maximal (ou inférieur)
approuvé pour l'émetteur par Industrie Canada. Dans le but de réduire les risques de brouillage radioélectrique à l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la
puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas l'intensité nécessaire à l'établissement d'une communication satisfaisante.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
L'exploitation est autorisée aux deux conditions suivantes :
(1)l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.
CE marking
CAUTION! This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful
interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this
equipment if an unauthorized change or modification is made.
IC RF Exposure Statement
NII frequency band 5150-5250 MHz is restricted to indoor use only.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Has XFA                         : No
Language                        : ko-KR
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.6-c015 81.157285, 2014/12/12-00:43:15
Format                          : application/pdf
Creator                         : cgt
Title                           : HT-K10 Manual-Toshiba_page1_130103
Create Date                     : 2016:03:23 10:19:47+09:00
Creator Tool                    : Microsoft® PowerPoint® 2013
Modify Date                     : 2016:04:11 11:02:44+09:00
Metadata Date                   : 2016:04:11 11:02:44+09:00
Producer                        : Microsoft® PowerPoint® 2013
Document ID                     : uuid:0970e2bb-253b-4b3c-974d-1d3d7d374f25
Instance ID                     : uuid:df2db5bd-dd68-44cc-a23c-a580e67321cc
Page Count                      : 4
Author                          : cgt

EXIF Metadata provided by EXIF.tools