Janam Technologies XT85WA Portable Data Terminal User Manual

Janam Technologies LLC Portable Data Terminal Users Manual

Contents

Users Manual.pdf

Copyright 2012 Janam Technologies LLC. All rights reserved.XM Series Quick Start GuideXT Series, Janam and the Janam logo are trademarks of Janam Technologies LLC. Other product and brand names may be trademarks or registered trademarks of their respective owners.Janam Technologies LLC assumes no responsibility for any damage or loss resulting from the use of this guide. Janam Technologies LLC assumes no responsibility for any loss or claims by third parties which may arise through the use of this product. Janam Technologies LLC assumes no responsibility for any damage or loss caused by deletion of data as a result of malfunction, dead battery or repairs. To protect against data loss, be sure to make backup copies (on other media) of all important data.Follow all usage, charging and maintenance guidelines in the Product User Guide. If you have questions, contact Janam. For a copy of the Product User Guide, visit www.janam.com.Important: Please read the End User License Agreement for this product before using the device or the accompanying software program(s). Using the device or any part of the software indicates that you accept the terms of the End User License Agreement.Janam Technologies LLCPage 1Content and Additional ResourcesTo help you get started with your XT Series mobile computer, this guide features:- Hardware Overview- Getting StartedA. Install the BatteryB. Charge the BatteryC. Attach the HandstrapD. Remove the BatteryE. Access the SIM Card Slot and microSD Card SlotContents of this guide are subject to change. For the most current version of this guide and additional product details visit, www.janam.com.For software updates and information, visit www.microsoft.com.XT Series Quick Start GuidePage 2www.janam.comTechnology at Work.®XT Series Quick Start Guide™111212XTminiQSG1Technology at Work.®
A. INSTALL THE BATTERY1. Place the plastic tabs on the base of the battery in the notches at the bottom of the battery compartment. 2. Press the top of the battery to snap in place.3. Push the battery lock switch to the lock position by sliding it to the left.B. CHARGE THE BATTERYImportant Note: The main battery charges the backup battery in the XT Series unit. Once the main battery is fully charged, do not remove it from the unit for 24 hours. During this period, the unit cannot maintain any user data if the battery is removed. To charge the battery using the USB AC Adapter Kit:1. Slide adapter plug onto the AC adapter housing.2. Insert the USB end of the USB cable into the USB port on the AC adapter housing.3. Insert the micro USB end of the USB cable into the micro USB port on the XT Series unit.4. Plug in the AC Adapter. Use only easily accessible wall sockets that are easily reached with the length of supplied power cable.To charge the battery using the USB Syncing/Charging Cable:1. Connect the power supply to the cable accessory, then connect the line cord to the power supply.2. Connect snap-on end of cable accessory to bottom of XT Series unit making sure the Janam logo on the connector faces front.3. Plug in the power supply. Use only easily accessible wall sockets that are easily reached with the length of supplied power cable.To charge the battery using a Cradle Kit:1. Connect the power supply to the cradle, then connect the line cord to the power supply.2. Plug in the power supply. Use only easily accessible wall sockets that are easily reached with the length of supplied power cable.3. Placethedeviceincradle.TheLEDonthedevicewillilluminatetoconrmconnection.4. The battery is fully charged in approximately 2 hours.Getting StartedPage 5Getting Started (continued)5. To charge a battery in the spare battery well, insert the battery into the well top down (connectors on the battery should face downward and to the back of the cradle) and gently press down. The LED lightonthecradlewillilluminatetoconrmconnection.C. ATTACH THE HANDSTRAP1. Insert plastic fastener on handstrap into the handstrap retainer clip face down as shown in diagram. It will click into place.2. Extend other end of handstrap toward base of XT Series unit (rough side of Velcro should be facing up). Feed through the handstrap bar as shown in diagram. 3. Pull handstrap through handstrap bar and fasten Velcro to close the strap. Fit strap and secure device to user’s hand by adjusting Velcro as needed.D. REMOVE THE BATTERY1. Push the battery lock switch to the unlock position by sliding it to the right.2. Liftthebatteryattheupperrightcorner(ngerliftgroovemarkedbyanarrow).E. ACCESS SIM CARD SLOT AND MICRO SD CARD SLOT1. After removing the battery, lift the media card compartment cover using notch at the top (it drops down to open).2. To access the SIM card slot, slide silver SIM card cover to the left and lift open.3. To access the microSD card slot, slide silver microSD card cover to the left and lift open.XT Series Quick Start GuidePage 6Hardware OverviewPage 361914131618 319 2171. Power Button2. Enter Key3. Back Space Key4. Micro USB Port5. Phone Disconnect Key6. Headset with Microphone7. Volume Control8. Right Trigger9. LCD10. NoticationLEDs11. Indicator LED12. Scan Window13. Receiver14. Left Trigger15. Push-to-Talk Button16. Scan Trigger17. Phone Connect Key18. Shift Key19. Microphone20. Yellow Function Key21. Connector22. Blue Function Key (Numeric keypad only)20Numeric KeypadQWERTY Keypad78512344567891121131416171819 20 212212 1215 15101110Hardware OverviewJanam Technologies LLCPage 4 8524679101Battery Compartment1. Battery2. Battery Lock Switch3. Finger Lift Groove4. Speaker5. Handstrap Retainer Clip6. Scan Window7. Lanyard Connector8. Stylus9. Camera or IrDA Window10. Stylus Slot11. Handstrap Bar12. Media Card Compartment Cover13. microSD Card Cover/Slot14. SIM Card Cover/Slot111314123

Navigation menu