Japan Radio CMN851 WLAN MODULE User Manual CMN 727A Installation Manual

Download:
Mirror Download [FCC.gov]
Document ID	1559902
Application ID	r11zdlTNZKdL/hKlfm40xg==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	66.36kB (829529 bits)
Date Submitted	2011-10-13 00:00:00
Date Available	2011-10-13 00:00:00
Creation Date	2011-10-05 10:54:02
Producing Software	Microsoft® Office Word 2007
Document Lastmod	2011-10-05 10:54:02
Document Title	CMN-727A Installation Manual
Document Creator	Microsoft® Office Word 2007
Document Author:	user

CMN-851 Installation Manual
CAUTION
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
1. Compliance statement and notification

Declaration of Conformity
Product Name: WLAN Module
Model Number: CMN-851
This device complies with Part 15 of FCC Rules and RSS-Gen of IC Rules. Operation is
subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference, including interference that may cause undesired
operation of this device.
RF exposure compliance:
This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled
environment and meets the FCC radio frequency（RF）Exposure Guidelines in Supplement C to
OET65 and RSS-102 of the IC radio frequency（RF）Exposure rules. This equipment has very low
levels of RF energy that it deemed to comply without maximum permissive exposure evaluation
（MPE）. But it is desirable that it should be installed and operated keeping the radiator at least
20cm or more away from person’s body（excluding extremities: hands, wrists, feet and ankles）.
< FCC >
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with the
1/9
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an AC outlet on a circuit different from that to which the receiver is
connected.
-Consult the dealer or an experienced radio/TV technician for help.
In according with 47 CFR Part15.407 (e) U-NII devices operating in 5.15-5.25GHz frequency
bands are restricted to indoor operations only.
This transmitter must not be co-located or operated in conjunction with any other antenna or
transmitter.
This device is slave equipment, the device is not radar detection and not ad-hoc operation in the
DFS band.
End Product Labeling
This transmitter module is authorized only for use in device where the antenna may be installed
such that 20cm may be maintained between the antenna and users. The final end product must
be labeled in a visible area with the following: "Contains FCC ID: CKECMN851”
< IC >
Canada, Industry Canada (IC) Notices
This Class B digital apparatus complies with Canadian ICES-003 and RSS-210.
Operation is subject to the following two conditions: (1) this device may not cause
interference, and (2) this device must accept any interference, including interference
that may cause undesired operation of the device.
Radio Frequency (RF) Exposure Information
The radiated output power of the Wireless Device is below the Industry Canada (IC) radio frequency
exposure limits. The Wireless Device should be used in such a manner such that the potential for
human contact during normal operation is minimized.
2/9
This device has also been evaluated and shown compliant with the IC RF Exposure limits under
mobile exposure conditions. (antennas are greater than 20cm from a person's body).
This device has been certified for use in Canada. Status of the listing in the Industry
Canada’s REL (Radio Equipment List) can be found at the following web address:
http://www.ic.gc.ca/app/sitt/reltel/srch/nwRdSrch.do?lang=eng
Additional Canadian information on RF exposure also can be found at the following web address:
http://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf08792.html
Canada, avis d'Industry Canada (IC)
Cet appareil numérique de classe B est conforme aux normes canadiennes ICES-003 et RSS-210.
Son fonctionnement est soumis aux deux conditions suivantes : (1) cet appareil ne doit pas
causer d'interférence et (2) cet appareil doit accepter toute interférence, notamment les
interférences qui peuvent affecter son fonctionnement.
Informations concernant l'exposition aux fréquences radio (RF)
La puissance de sortie émise par l’appareil de sans fil est inférieure à la limite d'exposition aux
fréquences radio d'Industry Canada (IC). Utilisez l’appareil de sans fil de façon à minimiser les
contacts humains lors du fonctionnement normal.
Ce périphérique a également été évalué et démontré conforme aux limites d'exposition aux RF d'IC
dans des conditions d'exposition à des appareils mobiles (les antennes se situent à moins de 20 cm du
corps d'une personne).
Ce périphérique est homologué pour l'utilisation au Canada. Pour consulter l'entrée correspondant à
l’appareil dans la liste d'équipement radio (REL - Radio Equipment List) d'Industry Canada
rendez-vous sur:
http://www.ic.gc.ca/app/sitt/reltel/srch/nwRdSrch.do?lang=eng
Pour des informations supplémentaires concernant l'exposition aux RF au Canada rendez-vous sur :
http://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf08792.html
Information to Be Supplied to the End User by the OEM or Integrator
The following regulatory and safety notices must be published in documentation supplied to the
end user of the product or system incorporating an adapter in compliance with local regulations.
Host system must be labeled with "Contains IC: 768B-CMN851 “
3/9
This radio transmitter IC: 768B-CMN851 has been approved by Industry Canada to operate
with the antenna types listed below with the maximum permissible gain and required antenna
impedance for each antenna type indicated. Antenna types not included in this list, having a
gain greater than the maximum gain indicated for that type, are strictly prohibited for use with
this device.
Antenna List
No. Manufacturer
Part No.
Antenna Type
Peak Gain
AH 104N2450D1
Chip Antenna
2.1dBi in 2.4GHz
TAIYO YUDEN
2.4dBi in 5GHz
Note: The Cable (I-pex type) connects WLAN module and Chip antenna.

CE Marking:
Please describe the following sentences to the label or the user manual of the product in each
language in the sales country:
Hereby, Japan Radio CO., Ltd. declares that this CMN-851 is in compliance with the
essential requirements and other relevant provisions of Directive 1999/5/EC.
4/9
2. Hardware Specification
2.1 Radio Specification
ITEM
Communication Standard
Access Control
Frequency Band and
Operating Channels
Channel Space
Modulation
Data Rates Supported
Antenna Connectors
Table 2-1 Radio Specification
Descriptions
IEEE802.11b/g/n
IEEE802.11a/n
CSMA/CA
U.S.A：2412～2462MHz
U.S.A：5180-5320MHz
5500 – 5700MHz
11 channels（1～11）
19 channels
Canada：2412～2462MHz
Canada：5180-5320MHz
11 channels（1～11）
5500 – 5700MHz
Europe：2412～2472MHz
19 channels
13 channels（1～13）
Europe：5180-5320MHz
Japan：2412～2472MHz
5500 – 5700MHz
13 channels（1～13）
19 channels
Japan：5180-5320MHz
5500 – 5700MHz
19 channels
5MHz
20MHz
DSSS / OFDM
OFDM
802.11b：1,2,5.5,11Mbps
802.11b：1,2,5.5,11Mbps
802.11g：6,9,12,18,24,36
802.11g：6,9,12,18,24,36
,48,54Mbps
,48,54Mbps
802.11n：HT20/40, MCS0～15 802.11n：HT20/40, MCS0～15
U.FL or equivalent, 2pcs.
2.2 Power Supply
PARAMETER
Supply Voltage (Vcc)
Operating Current
MIN
3.13
Table 2-2 Power Supply
TYP
MAX
UNIT
3.3
3.47
0.74
0.93
5/9
COMMENTS
Supply regulated voltage
Condition: Vcc=3.3V
2.3 Host Interface
2.3.1 Electrical Interface
PCI-express mini-card Rev1.1
2.3.2 Host Interface connector pin layout
Fig.1 Host Interface Connector pin layout
2.3.3 Pin assignment and signal descriptions
Pin No.
Signal name
#WAKE
Signal type
OD
3.3Vaux
COEX1
I/O
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
GND
COEX2
1.5V
CLKREQ#
UIM PWR
GND
UIM_DATA
REFCLKUIM_CLK
REFCLK+
UIM_RESET
GND
UIM_VPP
Reserved UIM_C8)
GND
Reserved UIM_C4)
W_DISABLE#
GND
RESET#
PERn0
3.3Vaux
PERp0
Descriptions
-PCIe service a function-initiated wake up
event request
-Open Drain Output
I/O
NC
PCIE reference clock request
NC
OD
NC
PCIE differential reference clock(100MHz)
NC
PCIE differential reference clock (100MHz)
NC
NC
NC
NC
IH/OH
IH
PCIE reset
PCIE Differential transmit
PCIE Differential transmit
6/9
Pin No.
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
Signal name
GND
GND
+1.5V
GND
SMB_CLK
PETn0
SMB_DATA
PETp0
GND
GND
USB DGND
USB D+
3.3Vaux
GND
3.3Vaux
LED_WWAN#
GND
LED_WLAN#
Reserved
LED_WPAN#
Reserved
+1.5V
Reserved
GND
Reserved
3.3Vaux
Signal type
Descriptions
GND
NC
GND
NC
PCIE Differential receive
NC
PCIE Differential receive
GND
NC
NC
GND
NC
GND
NC
IH/OH
NC
NC
NC
NC
NC
GND
NC
Signal type
OD
Description
Input
Output
Open Drain
Pull up
2.4 Environmental Conditions
ITEM
Operating Temperature
Operating Humidity
MIN
20
TYP
MAX
+50
95
7/9
UNIT
degC
%Rh
COMMENTS
Non condensing
2.5 Mechanical Specification
Size
: 30(W)x26.8(D)x4.75(H)mm
Weight : Approx. 5g
Label
Fig.2- Outline Drawing
8/9
3. Installation
(1) Please insert the module in the host side connector firmly.
insert the module
(2) Please connect the antenna cables with ANT-A and ANT-B
9/9

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Page Count                      : 9
Language                        : ja-JP
Tagged PDF                      : Yes
XMP Toolkit                     : 3.1-701
Producer                        : Microsoft® Office Word 2007
Title                           : CMN-727A Installation Manual
Creator                         : user
Creator Tool                    : Microsoft® Office Word 2007
Create Date                     : 2011:10:05 10:54:02Z
Modify Date                     : 2011:10:05 10:54:02Z
Document ID                     : 6197AC59-5DF9-4EA2-9CA9-FEE067B5FD39
Instance ID                     : 6197AC59-5DF9-4EA2-9CA9-FEE067B5FD39
Part                            : 1
Conformance                     : B
Author                          : user

EXIF Metadata provided by EXIF.tools