Japan Radio NTG420 Solid State Transmitter-Receiver User Manual SSradarMaintenanceManual
Japan Radio Co Ltd. Solid State Transmitter-Receiver SSradarMaintenanceManual
Contents
- 1. Usera manual(Installation)
- 2. Users manual(Operation)
Users manual(Operation)
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3102730 |
| Application ID | b9+RGwxOL5xaWfLaqQQ9QA== |
| Document Description | Users manual(Operation) |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 201.02kB (2512730 bits) |
| Date Submitted | 2016-08-18 00:00:00 |
| Date Available | 2016-08-26 00:00:00 |
| Creation Date | 2016-07-27 09:06:46 |
| Producing Software | Adobe PDF Library 15.0 |
| Document Lastmod | 2016-07-27 09:06:53 |
| Document Title | SSradarMaintenanceManual |
| Document Creator | Word 用 Acrobat PDFMaker 15 |
| Document Author: | JRC |
7ZPRR002 Operation Manual for THE NTG-420 SOLID STATE TRANSMITTER-RECEIVER Document No.7ZPRR0002 APR 2016 7ZPRR002 Revision Hsitory Revision Description Issued 7ZPRR002 TABLE OF CONTENTS SAFETY INFORMATION ................................................................................................4 1. Overview ...................................................................................................................10 2. Operation..................................................................................................................11 2.1 How to start the system.....................................................................................11 2.2 How stop the System. ........................................................................................13 2.3 Radar Control Module (N_Cont. exe) Main Window ........................................13 2.4 Solid State Radar Signal Input Module(N_Solid.exe) ......................................22 2.4.1 Icon ...............................................................................................................22 2.4.2 Start-up the Screen .....................................................................................23 2.4.3 Main Menu ....................................................................................................23 2.4.3.1 File..........................................................................................................23 2.4.3.2 View........................................................................................................24 2.4.3.3 Help ........................................................................................................24 2.4.4 Tree Menu and Functional Description ..................................................25 2.4.4.1 Radar Image ..........................................................................................26 2.4.4.2 Input Image ............................................................................................37 2.4.4.3 Failure history .......................................................................................43 2.4.4.4 Simulation..............................................................................................43 2.4.4.5 Sweep Tag .............................................................................................44 2.5.5 Admin Menu .................................................................................................47 2.5.5.1 Radar Image ..........................................................................................47 2.5.5.2 On Error Reboot ....................................................................................48 2.5.5.3 Admin Password ...................................................................................48 2.5.5.4 Process ..................................................................................................48 2.5.5.5 Common Memory ..................................................................................49 2.5.5.6. Debug ....................................................................................................49 2.6 Startup parameter ..............................................................................................49 3. Specification ............................................................................................................50 FCC Caution .................................................................................................................52 IC (Indutry Canada)......................................................................................................52 7ZPRR002 SAFETY INFORMATION To prevent harm to those who use this product or other people and damages to property, safety precautions to be followed are described as follows. ★ The degrees of harm and damages caused by misuse with neglecting indications are classified and described as follows. DANGER WARNING This indication means "Hazard can cause severe injury or This indication means "Hazard can cause injury or only physical damages." ★ Kinds of precautions to be followed are classified and described with the following icons. (A few examples of icons are as follows.) This icon is to call attentions. This icon is to prohibit some actions This icon is to force some actions. 7ZPRR002 DANGER Plug in completely In case of malfunctions or abnormal conditions (smoke, foul odor, sound, etc.), turn the power off and turn off may the breaker of the power distributor. Turn the power off and generate heat to cause a shock consult with our company. or a fire. Do not repair the device by Incomplete plugging yourself Unplug Do not put the device on unstable because it is dangerous. Do not wet or water the device. places(a shaky stand, tilted place, etc.). Dropping or falling down of the Wetting the device may cause a device may cause injury. shock or a fire. Do not wet Prohibition Do not put things (containers with Do not put liquid such as water, liquid, flower pots, etc.) or creatures metals or inflammable objects inside on the device. the device. Entering of liquid or Entering may cause a shock or a fire. excrement may cause a Prohibition shock or a fire. ★ In case of entering, Prohibition In case of entering, unplug unplug from the outlet and from the outlet and consult consult with our company. with our company. 7ZPRR002 DANGER Do not drop or bump the device. Do not use the device under a voltage other than the indicated power-supply voltage. Physical shock may cause a s Malfunction may occur hock or a fire. cause a shock or a fire. to Prohibition Prohibition Do not remove the back lid, the cabinet or When thunder has started, do not touch the cover, or do not modify the device. the power cables, the signal cables and the device. Consult with our company for Touching will cause a shock internal inspection and repair. Do not touch Do not decompose Do not damage the power cord or the plug. Damaging, processing, loading, heating, bending and twisting forcedly or pulling may deteriorate insulation of coating, expose cores or break the cord to cause a shock or a fire. Prohibition ★ In the case of damages, unplug from the outlet and ask our company 7ZPRR002 WARNINGS Carry the CRT monitor by more than Disconnect the plug and the connection one people since the monitor is lines when moving the device. heavy. Stumbling, etc. may cause injury. Damage of cords may cause a shock or a fire. Unplug Unplug with holding the plug. Unplug from the outlet for safety when maintaining Damage of cords may cause a A shock may be caused. shock or a fire. Unplug Unplug 7ZPRR002 WARNINGS Do not unplug with wet hands Do not block the ventilation holes of the cabinet. A shock may be caused. Heating up internally may cause malfunction or a fire. Pay attention to the following: Prohibition Prohibition ★Do not turn over, lay down or set upside down the device Do not put the device where much moisture Ask our company for internal or dust exists, and greasy fumes or steam is inspection and cleaning periodically. generated. Prohibition Putting the device on a Without cleaning for a long time, cooking table or near a dust gathered inside the device heater may cause a shock or a may cause malfunction or a fire. fire. Unplug from the outlet when not using for a long time. Dust gathered on the plug may cause a fire or a shock. Unplug 7ZPRR002 CAUTIONS Ground the earth wire of the plug. Do not put other devices (a TV, a display device, etc.) or magnetized objects near the CRT monitor. Installing the CRT monitor near those may have an effect on the screen (disturbing without grounding the earth colors or swaying the screen). shock may be caused wire. Furthermore, poor reception ★ Move the device seemed to effect away as possible. In case for TV's, radios, etc. may the phenomenon does not stop even so, Do not put the device in direct Do not use the device in a dark place at sunshine or in the heat of heating close range for a long time. Using the device apparatus. in a dark place at close range for long time may weary eyes or weaken eyesight. Heat may cause deformation of the cabinet ★Use the device at a distance of 40 or malfunction of parts. or 50 cm in a bright place where newspaper can read easily. rest for eyes every 30 minutes. Do not contact the cabinet with rubber or plastic products for a long time. The quality of the cabinet may alter or the coating may come off. Take a 7ZPRR002 1. Overview This manual describes operation function of the NTG-420 Solid State Transmitter-Receiver that is used for the land based radar surveillance system. Figure-1.1 shows total system illustration diagram of the NTG-420 and peripheral equipments. And Figure-1.2 shows functional data flow of the NTG-420. Figure-1.1 Total System Illustration Diagram of the Radar System. 10 7ZPRR002 X-band Radar Antenna SSPA TRX NTG-420 (Signal Processor CDC-1469) TCP Server TCP Client UDP (TCP/IP) Radar Control/Monitoring PC NCD-2247-1B Image Capture Fig. 1.2 Functional Data flow of the Radar System 2. Operation 2.1 How to start the system 1) Turn on the DC48V Power Supply by it’s switch or attached NFB. 11 7ZPRR002 2) Turn on the power switch on the NCD-2247-1B 3) Open the main menu Window (CDC-1469 control module by LAN (NMEA). See paragraph 2.3 4) Confirm the no error indication on main menu. 5) Turn on Antenna motor NFB. (Before turn on, It checks that there are no people near the antenna. 6) Click the Transmit ON button on the main menu 7) Echo will appear on the “Solid State radar Signal Input Module window”. See paragraph 2.4 12 7ZPRR002 2.2 How stop the System. 1) Stop the system by reverse procedure of the how to start. 2.3 Radar Control Module (N_Cont. exe) Main Window The following indication will be displayed when NTG-420 and NCD-2247-1B are connected normally. SIGNAL MODE(1) window menu Control/Monitor Main :TRX-1 displayed Transmit : OFF: Transition turned off, ON: Transmission turned on Stagger Transmit : OFF: Stagger Transition turned off, ON: Stagger Transmission turned on Range Table : Selects Range Table shown as table below. 13 7ZPRR002 Table No1. Transmit No. PW(us) FM(MHz) 0.07 0.15 0.3 0.15 0.15 0.3 0.6 0.07 Remarks; No.2 Transmit PW(us) FM(MHz) 2.8 30 4.6 30 9.1 20 18.3 30 28.0 30 9.1 30 9.1 30 2.8 30 PRF (Hz) 2280 2280 2280 1280 640 1864 1280 4100 Tm1 (us) 97.52 97.52 97.52 97.52 97.52 97.52 97.52 97.52 PW: Pulse Width, FM: Frequency Modulation range, PRF: Pulse Repetition Frequency, TM1: Time interval between No.1 and No.2 transmission No.1 Transmit No.2 Transmit PRF PW PW Tm1 FM FM: Frequency Modulation Shift Interference Rejection: Adjusts the interference rejection strength level Off / Low / Middle / High TRX Information Encoder Type : 2048 (Encoder pulse numbers) Unit Type : CDC-1469 (Signal Processor Model) Interface Revision : 00 CPU Software Version : 0000 FPGA Software Version : 0000 Request : Updated when click this button Failure State Initialization Failure : FPGA initialization failure. PLL Lock Failure : PLL lock faiture on the master clock of signal processor. Antenna Switch Failure : Antenna Safety Switch turned ON. ARP Signal Failure ACP Signal Failure : Lacked the Antenna encoder reference pulse. : Lacked the Antenna encoder pulse. Direction of Rotation Failure : Antenna is reverse rotation. Trigger Signal Failure : Lacked the Radar trigger signal. Video Signal Failure : Lacked the radar video signal during specified period. Internal Power Supply Failure : TRX internal power supply became abnormal condition. TRX. 14 7ZPRR002 IF Light Signal Failure : IF Optical Fiber signal Lost. High-speed IF Board Failure : AVAL Optical Board is Failure. TRX Monitor FPGA Temperature : xxx°shows temperature SP-Board Temperature : xxx°shows temperature Communication State 192.168.1.32(50000) SD RD : Green :Normal condition, Red :Abnormal(See below) 15 7ZPRR002 Sector Blank window menu Transmission Sector blanking angle can be presentable. This radar system has 7(seven) sector blanking area which are presentable individually. Input preset angle data Actual preset data(response TRX) 16 angle from 7ZPRR002 The blanking data of an input is reflected by pushing a SET button. Advanced Setting window menu Input data Actual preset angle data(response from TRX) Fine Tuning : Reserved Function. Sweep Integration Mode : ON or OFF (Reduce the Noise and Clutter echo) CFAR : ON or OFF (Constant False Alarm Rate) Maker Setting window menu This menu is presented by manufacture’s factory, so that please do not change recklessly.. 17 7ZPRR002 A password input is required when open the maker setting window. Initial password is “admin”. Setting of Password The mask of the inputted password is canceled temporarily. Click the ENT button and password will be memorized. * When a blank is set up, attestation with a password is not carried out. * It is enciphered and the inputted password is saved at an initialization file. Operation Mode FD : Not used Single This system can be used Single only 18 7ZPRR002 Main TRX Not used in this system. Pulse Transmit Mode (Default is P+Q) TRX-1 : P+Q (Indicate current transmission mode) P+Q : Select Both P(non-chirp) and Q(chirp) transmission pulse P : Select P pulse only Q : Select Q pulse only Encoder Type 2048 : Select antenna encoder 2048 pulse type 4096 : Select antenna encoder 4096 pulse type 2048 Green indication (Indicate current selected encoder type) Communication Preset Window 19 7ZPRR002 TCP Client Open/Close a socket Socket open state Socket connection state Flashing at sending and receiveing Server IP address Server port number Indicate the communication event Communication Event Log indication Update of the log of a communication event is stopped. The log of a communication event is cleared. ※ If you want to save the contents that are displayed in the file, copy it to the clipboard using such as Ctrl + A and Ctrl + C, please save the file using Memo-pad etc. 20 7ZPRR002 History of Failures Log Window indication Click the here The history of failure window displayed. 21 7ZPRR002 2.4 Solid State Radar Signal Input Module(N_Solid.exe) This module captures in a radar picture using an UDP socket (TCP/IP) from a solid-state TRX signal processing circuit (CDC-1469). The captured radar picture is provided through a shared memory to other applications. Also, Radar PPI image can be monitored using this module. SSTRX S/P Circuit CDC-1469 Radar Signal UDP (TCP/IP) Display Application Capture module Shared Momory N_Solid.exe VTS,ATC etc 2.4.1 Icon 22 7ZPRR002 2.4.2 Start-up the Screen Main Menu Tool Bar Tree Menu Radar Image Input Panel Status Bar 2.4.3 Main Menu 2.4.3.1 File (1) Exit Exit the Application Note: When this application is started according to the launcher process (Stater2.exe) of exclusive use, a window is closed and it operates in the background. 23 7ZPRR002 2.4.3.2 View Data Link：Display the Data Link Screen Tool Bar：Display on/off of the tool bar Tree Menu：Display on/off of the tree menu Input Panel：Display on/off the input panel Status Bar：Display on/off of the status bar (1) Data Link screen Other applications and the state of InterProcess communication are displayed. 2.4.3.3 Help (1) Version 24 7ZPRR002 2.4.4 Tree Menu and Functional Description The picture and input panel relevant to the selected function name are di A function name is displayed in tree form. When a function name is selected, a related picture and a related input panel are displayed. 25 7ZPRR002 2.4.4.1 Radar Image (1) A Scope : Image update is stopped when this switch turned ON. Range: Selects radar display range. 0.5 NM, 0.75 NM, 1.5 NM, 3 NM, 6 NM, 12 NM, 24 NM, 48 NM, 96 NM, 192 NM, Fixed: Fixed the display azimuth. Rng.: Displays distance of cursor position. Amp.: Displays echo level(amplitude) of the cursor position (reference value). Input Panel Radar Azimuth: Displays the radar antenna azimuth angle. Range Mark: Selects display on/off of the Range Marker. Amplitude Mark: Selects display on/off of the amplitude marker. Paint Out: : Selects painting out on/off. 26 7ZPRR002 Painting out off Painting out on (Please select according to CPU load) 1) Scale Amplitude Scale: Selects amplitude scale.(Scale/Marker Interval) ・ 0.5 / 0.1 V ・ 1.0 / 0.2 V ・ 2.0 / 0.5 V ・ 5.0 / 1.0 V (Amplitude(level) is reference value). 2) Display Interval Interval: Presets the update interval of radar picture. (Preset range:10～1000mS) Lap time: Displays the radar picture depiction lap time. If an updating cycle is shortened, the load of CPU will increase. (Please preset according to CPU load) Depiction time Interval (2) B-Scope 27 7ZPRR002 : Image update is stopped when this switch turned ON. : Shows cursor position in the picture. : Moves picture position. Range: Selects radar display range. Rng.: Displays distance of cursor position. Azi.: Displays azimuth angle of cursor position. Input Panel Radar Azimuth : Displays the radar antenna azimuth angle. Range Mark : Selects display on/off of the Range Marker. Azimuth Mark : Selects display on/off of the azimuth marker. Histogram : Selects display on/off of the histogram. 28 7ZPRR002 : Selects the histogram section width. 1 x 256, 4 x 64, 8 x 32, 16 x 16, 32 x 8 1 x 256 4 x 64 8 x 32 Split Color: Display on/off of the function to classify a radar picture by color to two gradation is changed. 3D Scope：Selects the 3D display on/off. 29 7ZPRR002 1) Scale Azimuth Scale: Selects azimuth scale. (Scale/Marker interval) ・ 30 / 5 deg ・ 60 / 10 deg ・ 90 / 15 deg ・120 / 20 deg ・180 / 30 deg ・270 / 45 deg ・360 / 60 deg 2) Display Interval Interval: Presets the update interval of radar picture. (Preset range:10～1000mS) Lap time: Displays the radar picture depiction lap time. If an updating cycle is shortened, the load of CPU will increase. (Please preset according to CPU load) Depiction time Interval 3) Color 30 7ZPRR002 White Button: Sets the radar picture display color to white monochrome. Green Button: Sets the radar picture display color to green monochrome. Yellow Button: Sets the radar picture display color to yellow monochrome. Red Slide Bar: Adjusts the red level of radar picture color. Green Slide Bar: Adjusts the green level of radar picture color. Blue Slide Bar: Adjusts the blue level of radar picture color. Reset Button: Resets the gradation curvature. Brightness Scroll Bar: Adjusts the brightness of gradation curvature. Contrast Scroll Bar: Adjusts the contrast of gradation curvature. Gamma Scroll Bar: Adjusts the gamma level of gradation curvature. Example of Adjusting of gamma level 4) Stretch Mode Stretch Mode: Selects the pixel composite method for B-scope conversion. ・None : Pixel composition is not carried out. ・Peak Hold :Maximum value is used. ・Average : Average value is used. 31 7ZPRR002 ・Minimum None Average : Minimum value is used. Peak Hold Minimum (3) PPI Scope 32 7ZPRR002 : Image update is stopped when this switch turned ON. : Shows cursor position in the picture. : Moves picture position. (Off-Center) :Expand the position of cursor. (Zoom-in) : Reduce the position of cursor. (Zoom-out) : Shows display range and range marker interval. Rng. : Displays distance of cursor position. Azi. : Displays azimuth angle of cursor position. Input Panel Radar Azimuth : Displays the radar antenna azimuth angle. Range Mark : Selects display on/off of the Range Marker. Azimuth Mark : Selects display on/off of the azimuth marker. 33 7ZPRR002 Histogram : Selects display on/off of the histogram. : Selects the histogram section width. 1 x 256, 4 x 64, 8 x 32, 16 x 16, 32 x 8 1 x 256 4 x 64 8 x 32 Split Color: Display on/off of the function to classify a radar picture by color to two gradation is changed. 3D Scope：Selects the 3D display on/off. 34 7ZPRR002 1) Scale Range: Selects the display range scale. (Range/Range Marker Interval) • 0.25 / 0.05 NM • 0.5 / 0.1 NM • 1 / 0.2 NM • 2 / 0.5 NM • 4 / 1 NM • 8 / 2 NM • 16 / 5 NM • 32 / 10 NM • 64 / 20 NM • 128 / 50 NM 2) Display Interval Interval: Presets the update interval of radar picture. (Preset range:10～1000mS) Lap time: Displays the radar picture depiction lap time. If an updating cycle is shortened, the load of CPU will increase. (Please preset according to CPU load) Depiction time Interval 3) Color 35 7ZPRR002 White Button: Sets the radar picture display color to white monochrome. Green Button: Sets the radar picture display color to green monochrome. Yellow Button: Sets the radar picture display color to yellow monochrome. Red Slide Bar: Adjusts the red level of radar picture color. Green Slide Bar: Adjusts the green level of radar picture color. Blue Slide Bar: Adjusts the blue level of radar picture color. Reset Button: Resets the gradation curvature. Brightness Scroll Bar: Adjusts the brightness of gradation curvature. Contrast Scroll Bar: Adjusts the contrast of gradation curvature. Gamma Scroll Bar: Adjusts the gamma level of gradation curvature. Example of Adjusting of gamma level 4) Stretch Mode Stretch Mode: Selects the pixel composite method for B-scope conversion. ・None : Pixel composition is not carried out. ・Peak Hold :Maximum value is used. ・Average : Average value is used. ・Minimum : Minimum value is used. 36 7ZPRR002 None Average Peak Hold Minimum 2.4.4.2 Input Image Selectes the input source Radar (Socket) : Selects radar signal. Simple Pattern : Selects the Test Pattern. Cycle: Presets the test pattern rotation speed. Bitmap File: Makes the bitmap file. : Selects the bitmap file. Noise++ : Superimpose the noise signal. (This setup is not saved.) 37 7ZPRR002 (1) Socket The TCP/IP UDP client socket for connecting with radar signal processing equipment (CDC1469) on NTG-420 SSTRX is set up. Startup – Auto Open: Automatically sets the socket to the application startup in the case to be open. Port No: Presets the receiving port number of UDP socket. Status : Status of UDP socket. : Close : Open : Ready for Transmission : Under transmission : Waiting the receiving : Under receiving Open(or Close) Button : Open (or close) the socket Receive Buff Size : Presets the receiving buffer size. (1 - 512MB) 1) Radar Information Azimuth : Displays radar antenna azimuth angle. (Latest sweep message angle) ACP Resolution : Displays ACP resolution. Rotational Period : Displays Antenna revolution period and rotation speed(rpm). Azimuth Resolution]: Displays azimuth resolution. (The value which divided 360 degrees by the number of sweeps) 2) Message1 38 7ZPRR002 Display the header information of the receiving message. Format of Receiving Message Type Size Header 12 bytes Range bin size +3bytes Sweep data Description Message ID (0x48) Message size(12) Sequence Number(0 – 255) Range bin size Antenna encoder bit number(0x00:11,0x01:12) Antenna Angle information CRC32c Message ID (0 x 44) Message size(Range bin size + 3) Data (Echo strength data) 3) Message2 & Counters Message ID :Displays the message ID of sweep data (0 x 44). Message Size :Displays the message size of sweep data. *Message size = Range bin size+3. Event Counters :Displays event counters of sweep message receiving process. Contents of event counters Location Outline Upper1 It is interrupted 2 seconds or more during message reception. Upper2 Sequence number error Upper3 Azimuth error(skipping) Upper4 Invalid data before Header Upper5 Split receiving of header Lower1 Sweep data ID error Lower2 Mismatching of sweep range bin number 1 Lower3 Mismatching of sweep data range bin number 2 Occurrence of exception during sweep data receiving Lower4 data Detailed If received during the reception of the message is interrupted for two seconds, and discard the message received up to the middle of its sweep. The number of times. Number of times that the header sequence number is not correctly incremented. Number of times that the angle is open more than once of the orientation information in the header. In a state of waiting for reception of the header, bytes on read-and-discard mode of data that is not recognized as a header. In a state of waiting for reception of the header, the header is received over a plurality of reception processing. The number of times. In a state of waiting for the reception of the sweep data, the number of bytes on read-and-discard mode when the message ID is not detected. Indicates the number of times the number of data of the range bins number and sweep data of the header do not match. Always 0. The counter to be detected above is always 0. Always 0. (Referred to debugging) 39 7ZPRR002 Lower5 Sweep number Shows maximum sweep number in receved data at 1 time receving by appilication. Indication of whether it is processed smoothly. 4) Receiving Rate Read Size: : Display the maximum of the data size processed by one reception processing. Receive Rate: Display the maximum of the receiving data size per second. Counter Reset Button: Clear the maximum value of both Read Size and Receive Rate. 5) Error Status It will display an error of application definition that occurred during the receiving process. Error Code: Display the error number. Error File: Display the error of occurred location (source file name). Error Line: : Display the places that have occurred error (line number on the source file). Clear Button: Clear the error display. (2) Video Gain Video Gain Scroll Bar: Adjust the radar video gain. (-1.00～+1.00) : Reset the Video Gain to default value. (+1.00) Video Offset Scroll Bar: Adjust the offset voltage of radar video. (-1.00～+1.00) : Reset the Video Offset to default value. (0.00) Profit Offset: Gain offset. This value is controlled by other module. 40 7ZPRR002 Video Input ＊ ＋ A/D Gain ＋ Offset Profit offset (3) RangeRate Range Rate: Select the Range Rate (Resolution) 0 - 7.5m/pixel (20MHz) 1 - 15m/pixel (10MHz) 2 - 22.5m/pixel 3 - 30m/pixel (5MHz) 4 - 37.5m/pixel 5 - 45m/pixel 6 - 52.5m/pixel 7 - 60m/pixel (2.5MHz) 8 - 67.5m/pixel 9 - 75m/pixel (2MHz) 10 - 82.5m/pixel 11 - 90m/pixel 12 - 97.5m/pixel 13 - 105m/pixel 14 - 112.5m/pixel 15 - 120m/pixel (1.25MHz) (4) Input Bin Size Input Bin Size: Specify the input range bin size. (512 – 8192) *By shortening the capture range bin size(length), you can reduce the CPU load. 41 7ZPRR002 (5) 0m Adjustment 0m Adjustment: Adjust the radar echo start range bin. (-2500m - +2500m)） This adjustment is for adjusting the center of the radar image and shift the radar image on the home side in pixels. (6) Azimuth Adjustment Azimuth Adjustment: Adjust the radar azimuth angle. (0x0000 - 0xFFFF) This is for radar echo azimuth angle. Resolution is 360/65536(deg.) 42 7ZPRR002 2.4.4.3 Failure history Failure history will be displayed for the troubleshooting. Update Button: Update the current logging information. All Clear Button: Clear the all logging information. Save to file Button: Save the current logging data with file name. 2.4.4.4 Simulation This function is to simulate the output of the message of the CDC-1469. It can not use that it has not Open the receiving socket so to send will use the socket for reception. Enabled: This is switch for simulation on/off. Period: Specify the radar antenna rotation speed for the simulation. IP Addr: Specify the output IP address. (127.0.0.1 is special IP which mean own IP address) Port No: Specify the output port number. Send one sweep Button: Outputs the message of one sweep data as single. Outputs the whether Enabled check box is off. 43 7ZPRR002 Err Sim 1 Button: Outputs the CRC32C of header with taking small interval. Err Sim 2 Button: Outputs any of the data before header. Err Sim 3 Button: Lack the message of 1 sweep length. *These functions are for communication confirmation and debugging. (1) Message1 Specify the header information of simulated sweep message. Type Header Size 12 bytes Range bin size + 3 bytes Sweep Data Description Message ID (0x48) Message size(12) Sequence Number(0 – 255) Range bin size Antenna encoder bit number(0x00:11,0x01:12) Antenna Angle information CRC32c Message ID (0 x 44) Message size(Range bin size + 3) Data (Echo strength data) (2) Message2 & Counters Message ID : Specify the message ID of simulated sweep data (0 x 44). Message Size : Specify the message size od simulated sweep data. *Message size = Range bin size+3. Send Counter : Select the both sending data counter and sweep counter. Receive Counter: Select the both receiving data counter and sweep counter. Difference :Select the different. (Send Counter) – (Receive Counter) Number of bytes: Display the data counter. Number of sweeps: Display the sweep counter. Clear Button: Clear the above counter. 2.4.4.5 Sweep Tag Tag Format (Size): 44 7ZPRR002 None(0): No hardware Tag. Range bin 4080～4095 3～4079 Description Padding data 16bytes Radar picture data 3 - 4079 Radar picture data 2 Radar picture data 1 Radar picture data 0 Remarks 0 Fixed Valid Valid Valid Valid PciVdo(16): Pci – Vdi format Range bin Description Radar picture data 0 - 4079 16～4095 15 Command register H 14 Command register L 13 End distance H 12 End distance L 11 Start distance H 10 Start distance L Times of day H Times of day L Dummy PPS counter value H PPS counter value M PPS canter value L External Tag H External Tag L Radar antenna azimuth H [65536 / 360] Radar antenna azimuth L [65536 / 360] Remarks Valid 0 Fixed 0 Fixed Valid Valid 0 Fixed 0 Fixed 0 Fixed 0 Fixed uncertainty 0 Fixed 0 Fixed 0 Fixed 0 Fixed 0 Fixed Valid Valid PciRvi(4) : Pci – Rvi format Range bin Description Padding data 12 bytes 4084～4095 Radar picture data 0 - 4079 4～4083 External Tag H External Tag L Radar antenna azimuth H [65536 / 360] Radar antenna azimuth L [65536 / 360] Remarks 0 Fixed Valid 0 Fixed 0 Fixed Valid Valid 45 7ZPRR002 PciRvi(16): Pci – Rvi format + 12 bytes padding Range bin 16～4095 4～15 Description Radar picture data 0 - 4079 Padding data 12bytes External Tag H External Tag L Radar antenna azimuth H [65536 / 360] Radar antenna azimuth L [65536 / 360] Remarks Valid 0 Fixed 0 Fixed 0 Fixed Valid Valid Nams(10): Nams format Range bin 4090～4095 10～4089 Description Padding data 6bytes (=0) Radar picture data 0 - 4079 End distance H End distance L Start distance H Start distance L Radar antenna azimuth H [65536 / 360] Radar antenna azimuth L [65536 / 360] PPS times of day H PPS times of day MH PPS times of day ML PPS times of day L Remarks 0 Fixed Valid Valid Valid 0 Fixed 0 Fixed Valid Valid 0 Fixed 0 Fixed 0 Fixed 0 Fixed Nams(16): Nams format + 6bytes padding Range bin 16～4095 10～15 Description Radar picture data 0 - 4079 Padding data 6bytes End distance H End distance L Start distance H Start distance L Radar antenna azimuth H [65536 / 360] Radar antenna azimuth L [65536 / 360] PPS times of day H PPS times of day MH PPS times of day ML PPS times of day L 46 Remarks Valid 0 Fixed Valid Valid 0 Fixed 0 Fixed Valid Valid 0 Fixed 0 Fixed 0 Fixed 0 Fixed 7ZPRR002 2.5.5 Admin Menu This menu is a summary of the settings to be performed when the system is introduced. This is not used in normal. To display this menu, complete the following steps. i. Click the File of main menu with pushing the Ctrl key. ii. Select the Admin Menu of Menu. iii. Push the OK button after input the password. (Initial password: “Admin”) Administrator menu 2.5.5.1 Radar Image (1) A Scope It is an item holder for the A Scope display. 1) Double Buffered Double Buffered: In case a radar picture is updated, it carries out through a buffer. Flicker when moving the image will be reduced by this function. (2) B Scope It is an item holder for the B Scope display. 1) Double Buffered 47 7ZPRR002 Double Buffered: In case a radar picture is updated, it carries out through a buffer. Flicker when moving the image will be reduced by this function. (3) Ppi Scope It is an item holder for the Ppi Scope display. 1) Double Buffered Double Buffered: In case a radar picture is updated, it carries out through a buffer. Flicker when moving the image will be reduced by this function. 2.5.5.2 On Error Reboot If reboots, when an error occurs: Reboots the PC at error occurrence. Forced reboot: Reboots immediately. (Test use) 2.5.5.3 Admin Password Admin Password: Set the password to enter to display the Administrator menu. 2.5.5.4 Process Process Priority: Select the application process priority. 0 – Real time 1 - High 2 - Above Normal 3 - Normal 4 - Below Normal 5 - Idle High priority ↑ ↓ Low priority Thread Priority: Select the priority of the application's main thread. 0 - Time Critical 1 - Highest 2 - Above Normal High priority ↑ 48 7ZPRR002 3 - Normal 4 - Below Normal 5 - Lowest 6 - Idle ↓ Low priority CPU Select: (Not using) 2.5.5.5 Common Memory It is an interface for providing other applications with a radar picture. Main output: Output for shared memory name to the image processing module. Group core: Shared memory name for the final output. 2.5.5.6. Debug For debugging (No discloser) 2.6 Startup parameter The format of the command line parameters Space N_Solid.exe /ini=aaa.ini No space Enclosed in a long file name is "" /log=”aadf dsa.log” No space The following control is possible by the command line parameter. Command Line Parameter Description /ini=(Initialization file name) Specify the initialization file. The default is to N_Solid.ini of module directory. /log=(Failure log file name) Specify the failure log file name. The default is to N_Solid.log of module directory. /name=(Instance distinguished name) Specify the unique identification name to create multiple instances in the PC. /mem=( Shared memory name) Specify the name of the destination shared memory of the captured radar image. 49 7ZPRR002 3. Specification Transmitting frequency : Non-chirp pulse 9,410MHz(P0N) Chirp pulse 9,440 ± 15MHz(Q0N) Non-Chirp/Chirp pulse (P0N/Q0N) *1 Transmitting power : 200W +1dB, -3dB (100W~251W)*2 Transmitter Type : Solid State Power Amplifier(SSPA) Transmission pulse width : Refer to Transmission Table(1) Pulse repetition frequency(PRF) : Refer to Transmission Table(1) Transmission Table(1) No. Non-chirp pulse 0.07us 0.15us 0.3us 0.15us 0.15us 0.3us 0.6us 0.07us Pulse width Chirp Non-chirp pulse /Chirp pulse pulse 2.8us 0.07us/2.8us 4.6us 0.15us/4.6us 9.1us 0.3us/9.1us 18.3us 0.15/18.3us 28.0us 0.15us/28.0us 9.1us 0.3us/9.1us 9.1us 0.6us/9.1us 2.8us 0.07us/2.8us PRF 2280Hz 2280Hz 2280Hz 1280Hz 640Hz 1864Hz 1280Hz 4100Hz Minimum Detection Signal(MDS) : -93dBm or less A/D Sampling rate : 16bit/84MHz Pulse compression : Provided Video Processing function : Interference rejection, CFAR and Coherent integration Output signal : Radar video and Trigger Radar control/monitoring : TCP/IP communication Power supply : DC48V ± 10% Power consumption : Less than 130W Dimensions : 554mm(W) x 330mm(D) x 580mm(H) (Including Mounting Plate) Operation temperature range : -15 ~ +50ºC, Non-condensing Relative humidity : 93% @+40ºC Storage temperature range : -25 ~ +60ºC *1: Transmits both P0N and Q0N at simultaneously *2: Transmitting power is fixed. 2) Radar Control/Monitoring PC display Hardware PC Model : HP Z230 or equivalent/ 32 or 64bit Model CPU : Xeon 2.8GHz or more Memory : 4Gbyets or more Hard Disk : 500GB or more 50 7ZPRR002 NIC#1 NIC#2 OS Software Feature : Gigabit (1000Mbps) Jumbo Frame more than 9014bytes : Ethernet (1000Mbps/100Mbps/10Mbps) : Windows 7 Professional (32 or 64bit) : Radar Control Radar Condition Monitoring Radar Echo Display NTP Time adjustment VNC Server 51 7ZPRR002 FCC Caution Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: 1) Reorient or relocate the receiving antenna. 2) Increase the separation between the equipment and receiver. 3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 4) Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 80 and Part 90 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. IC (Indutry Canada) This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : 1) l’appareil ne doit pas produire de brouillage; 2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement. 52
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : Yes Author : JRC Create Date : 2016:07:27 09:06:46+09:00 Modify Date : 2016:07:27 09:06:53+09:00 Subject : Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 5.6-c015 84.158975, 2016/02/13-02:40:29 Metadata Date : 2016:07:27 09:06:53+09:00 Creator Tool : Word 用 Acrobat PDFMaker 15 Document ID : uuid:76a1a4ba-2bff-4a83-9a1c-86cee14433e9 Instance ID : uuid:4811b6b2-54d2-45fe-99a2-3e8447546a29 Format : application/pdf Title : SSradarMaintenanceManual Description : Creator : JRC Producer : Adobe PDF Library 15.0 Keywords : Source Modified : D:20160727000621 Company : Page Layout : OneColumn Page Count : 52EXIF Metadata provided by EXIF.tools