Jasco HH2TX 14 Channel Family Radio Service (FRS) Transceiver User Manual 3028 FRSManualA

Download:
Mirror Download [FCC.gov]
Document ID	295860
Application ID	p0nsZ3f9fy+SCc0SIB9SBg==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	16.26kB (203216 bits)
Date Submitted	2003-01-15 00:00:00
Date Available	2003-01-15 00:00:00
Creation Date	2002-11-18 16:16:16
Producing Software	Acrobat Distiller 5.0 (Windows)
Document Lastmod	2002-11-18 16:16:16
Document Title	3028 FRSManualA.cdr
Document Author:	marvin

LCD
SCREEN
UP
MONITOR
DOWN
menu
mon
pwr
scan
MIC
SCAN
POWER
MENU
SPEAKER
2. Press the TALK button to communicate on that
channel and leave the scan mode, or press
or to continue scanning for other active
channels.
3. Press the SCAN button again to stop scanning.
MONITORING CHANNELS
By pressing the MONITOR button, you are able to
'listen' to all traffic or noise active on the current
channel, regardless of signal strength and subcode
settings. For continuous monitoring, press and
hold the MONITOR button for at least three seconds.
To deactivate continuous monitoring, press the
MONITOR button again.
CALL
The Handheld 2-Way Radio is equipped with a
call feature that allows you to alert another party.
In order for the call feature to work, all radios
must be on.
1. Press the CALL button once. Transmit Indicator
will light RED and the TX symbol will appear
BATTERY LIFE
INDICATOR
SCAN CHANNELS
KEY LOCK
VOICE-ACTIVATED
TRANSMISSION
BATTERY INSTALLATION
The Handheld 2-Way Radio is designed to
incorporate both standard alkaline batteries
and the GE/Sanyo Rechargeable Battery Pack
(GES-NCF01FR). This battery pack can be
purchased separately.
1. Remove the belt clip by pushing up on it while
pulling on the battery clip tab.
2. Remove the battery cover by sliding it down.
Use 4 X AAA
alkaline battery or
Ni-Cd battery pack
GP35AAAK4BX
or JB35AAANC4BC
If using the GE/Sanyo
Rechargeable Battery
Pack (GES-NCF01FR):
3. Insert the rechargeable battery
pack making sure that the metal
contacts are facing out (toward the battery cover).
4. Replace the battery cover and belt clip.
IMPORTANT: MAKE SURE THAT YOU USE ONLY
THE RECHARGEABLE BATTERY PACK THAT IS
SPECIFIED ABOVE (GES-NCF01FR). USING
ANOTHER MAY NOT WORK AS THE UNIT IS
DESIGNED SPECIFICALLY FOR IT.
If using the special rechargeable battery
pack, you can purchase the GE Wireless
Intercom (GE5811-WCOM), which
is equipped with two convenient
charging cradles. You can have
multiple handheld units and
intercoms to complete your
family communications
needs. The units will all
communicate with each
other as long as they are set to the same channel
and subcode (see SETTING THE CHANNEL and
SETTING THE SUBCODE for more information).
CAUTION: DO NOT ATTEMPT TO RECHARGE
ALKALINE BATTERIES. KEEP THE HANDHELD
UNITS OUT OF THE CHARGING CRADLES WHEN
USING STANDARD BATTERIES.
IMPORTANT: Remove batteries before storing
the Handheld 2-Way Radio for extended periods.
Batteries corrode over time and may cause
VOICE-ACTIVATED TRANSMISSION
The Handheld 2-Way Radio is equipped with a
voice-activated transmission mode (hands-free
mode). The unit will transmit voice signals (and
other loud sounds) without having to press the
TALK button.
1. Press the MENU button repeatedly until the
symbol flashes on the LCD.
2. Use the button to enable voice activated
transmission and the button to disable it.
3. Press the TALK button to confirm the selection
and return to the standby mode.
SETTINGS, OR OTHER SETTINGS WHEN THE KEY
LOCK FEATURE IS ACTIVATED.
1. To lock the unit, press and hold the MENU
button for five seconds until the symbol
appears on the LCD.
2. To unlock the unit, press and hold the MENU
button for five seconds until the symbol
disappears from the LCD.
damage. Battery contacts can be wiped with
a dry, lint-free cloth.
If the radio gets wet, turn off and remove batteries
immediately. Dry the battery compartment with
a soft cloth to minimize potential water damage.
Leave cover off the battery compartment overnight
or until completely dry. Do not use radio until
completely dry.
ICON BATTERY LIFE INDICATOR
The symbol on the LCD shows the remaining
battery level. Squares inside the symbol disappear
as the battery life decreases. When the battery
level is low, the
symbol will flash, indicating
that the batteries need to be changed or recharged
(see BATTERY INSTALLATION for more
information).
KEY LOCK
This function prevents unintended setting changes
by locking all buttons. IMPORTANT: YOU WILL
NOT BE ABLE TO CHANGE THE CHANNEL,
SUBCODE , VOICE-ACTIVATED TRANSMISSION
CARING FOR YOUR HANDHELD RADIO
To clean the Handheld 2-Way Radio, wipe with
a soft cloth, slightly dampened with water. Do not
use cleaners or solvents on the radio as they can
harm the body and leak inside, causing permanent
SPECIFICATIONS
Frequency range ..............462.5625 to 467.7125 MHz
FRS channels .......................................................... 14
Channel separation ........................................... 25 kHz
Frequency deviation ............................................ 1 kHz
CTCSS subcodes ..................................................... 38
Maximum range .............................................. 2 miles*
Maximum RF output power ............................ 0.06W
Battery life ........ 45 hours (40 standby, 5 talk/receive)
using ALKALINE BATTERIES
on the LCD for three full seconds, indicating
that a call transmission is taking place.
2. All nearby radios operating on the same
channel and subcode will emit a page tone.
To communicate with others in your group,
all members must have their units configured
to the same channel and subcode (see SETTING
THE CHANNEL and SETTING THE SUBCODE
for more information).
TURNING THE RADIO ON AND OFF
When the radio is on and not transmitting, the
1.To turn the radio on, press and hold the POWER
unit is in the standby mode. When you receive
button. The radio will emit a short tone and the
a signal from another member in your group, the
LCD screen will display "FRS" followed by the
symbol will be displayed on the LCD.
current channel.
To send a signal:
2.To turn the radio off, press and hold the POWER
1. Press and hold the TALK button to transmit.
button for at least two seconds. The radio will
The Transmit Indicator will light RED and the
emit a short tone and the LCD screen will go blank.
symbol will be displayed on the LCD.
ADJUSTING THE VOLUME
2. While holding the TALK button, speak in a
The speaker volume level is indicated by the number
normal voice holding the unit approximately 6
of bars on the
symbol displayed on the
inches away.
top right portion of the LCD screen.
3. Release the TALK button when you have
1. Press the
button to increase the volume
finished speaking.
and the
button to decrease the volume.
IMPORTANT: To ensure that part of your
communication is not cut off, allow a short pause
TRANSMITTING/RECEIVING - TALKING
after pressing and before releasing the TALK
TO OTHERS IN YOUR GROUP
permanent damage to the unit. Different types
of batteries or new and used batteries should
not be mixed. Exhausted batteries should be
removed from the unit and disposed of properly.
button when speaking. YOU CANNOT RECEIVE
INCOMING MESSAGES WHEN THE TALK
BUTTON IS PRESSED.
CHANNELS AND SUBCODES
The Handheld 2-Way Radio transmits and
receives voice signals on 14 selectable channels
(frequencies). In addition to the 14 channels,
the units are equipped with 38 selectable
subcodes. To speak with others in your group,
all members must have their units configured
to the same channel and subcode.
SETTING THE CHANNEL
1. Press the MENU button repeatedly until
the current channel flashes on the LCD.
2. Use the and
buttons to select
the desired channel (1-14).
3. Press the TALK button to confirm the channel
selection and return to the standby mode.
SETTING THE SUBCODE
Subcodes help filter interference and noise from
your body while using the headset accessory, use only
the supplied belt clip for this product and when
transmitting, take it out of the belt to ensure that the
antenna is at least 2 inches (5 cm) from your body.
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
Use only the supplied antenna. Unauthorized antennas, interference to radio communications.
modifications, or attachments could damage the
transmitter and may violate FCC regulations.
However, there is no guarantee that interference will
FCC INFORMATION
not occur in a particular installation. If this equipment
Your wireless hand-held portable transceiver contains a This device complies with Part 15 of the FCC Rules.
low power transmitter. When the Push-to-Talk (PTT) Operation is subject to the following two conditions: does cause harmful interference to radio or television
button is pushed it sends out radio frequency (RF)
(1) this device may not cause harmful interference, and reception, which can be determined by turning the
signals. The device is authorized to operate at a duty (2) this device must accept any interference received equipment off and on, the user is encouraged to try to
factor not to exceed 50 %. In August 1996, the
Including interference that cause undesired operation. correct the interference by one or more of the following
measures:
Federal Communications Commissions (FCC) adopted
RF exposure guidelines with safety levels for hand-held WARNING: Adjustment to this unit or replacement
wireless devices.
Of any transmitter component (crystal, semiconductor Reorient or relocate the receiving antenna.
Increase the separation between the equipment and
IMPORTANT: To maintain compliance with the FCC's Etc,) to this unit that could result in a violation of the
receiver.
rules.
RF exposure guidelines, hold the transmitter and
antenna at least 2 inches (5 cm) from your face and NOTE: This equipment has been tested and found to Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
speak in a normal voice, with the antenna pointed up comply with the limits for a Class B digital device,
and away from the face. If you wear the handset on pursuant to Part 15 of the FCC Rules. These limits are Consult the dealer or an experienced radio/TV
technician for help.
13 hours (11.5 standby, 1.5 talk/receive) using
SPECIAL RECHARGEABLE BATTERY PACK
* Functional range may be adversely affected by
one or more of the following factors: weather,
radio frequency interference, low transmitter
battery and obstructions between the
transmitter and receiver.
10
11
12
13
14
15
1.8125"
1.8125"
1.8125"
1.8125"
1.8125"
1.8125"
1.8125"
other systems operating on the same channel.
When a subcode is activated, the unit ignores
signals that are set to a different subcode. Thus,
a group can communicate on a 'noisy' channel
using the subcode feature. The feature is perfect
for areas with heavy usage (e.g. construction zones)
in which all 14 channels may be occupied.
1. Press the MENU button repeatedly until
the current subcode flashes on the LCD.
2. Use the and buttons to select the
desired subcode (0-38). Selecting 0 disables the
subcode feature.
3. Press the TALK button to confirm the subcode
selection and return to the standby mode.
2.9375"
TX
INDICATOR
2-Way Radio
SUBCODE
PULL UP
ON TAB
AAA
TALK
(push to
talk: PTT)
CHANNEL
If using standard
alkaline batteries:
3. Insert 4 "AAA"
alkaline batteries
with the polarities
as shown.
4. Replace the battery
cover and belt clip.
AAA
CALL
VOLUME
SCANNING CHANNELS
This feature continuously scans all channels and
stops on the first active channel (observed traffic).
1. Press the SCAN button once. The
symbol
appears on the LCD and the unit begins scanning
all 14 channels in order. The unit stops on the
first active channel detected.
FAMILY COMMUNICATIONS
HANDHELD 2-WAY RADIO
2.9375"
ANTENNA
EAR/MIC
JACK
RECEIVE/
TRANSMIT
INDICATOR
AAA
THE LCD SCREEN
AAA
BUTTONS AND FUNCTIONS
Questions? Call 1-800-GE LIGHT
Made in China for
GE Home Electric Products, Inc.,
Nela Park, Cleveland, OH 44112
Desc.: GE5811-WHH
INSTRUCTION MANUAL
1.8125"

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Create Date                     : 2002:11:18 16:16:16+08:00
Modify Date                     : 2002:11:18 16:16:16+08:00
Page Count                      : 1
Creation Date                   : 2002:11:18 08:16:16Z
Mod Date                        : 2002:11:18 08:16:16Z
Producer                        : Acrobat Distiller 5.0 (Windows)
Author                          : marvin
Metadata Date                   : 2002:11:18 08:16:16Z
Creator                         : marvin
Title                           : 3028 FRSManualA.cdr

EXIF Metadata provided by EXIF.tools