user manual
FREEDOM USER GUIDE FCC ID: XX8-F5 IC: 20385-F5 ENGLISH SET-UP Quick Start.................................................................................................................. 3 In-the-box.. .................................................................................................................. 9 Fit................................................................................................................................ 10 Comply......................................................................................................................... 11 Ear Fins....................................................................................................................... 13 Cord Management Clips.............................................................................................. 16 Cord Clip. . .................................................................................................................... 18 Power On: Music & Calls.. ............................................................................................ 19 MySound App............................................................................................................... 20 DETAILED INSTRUCTIONS Charging / Battery Status........................................................................................... 22 Charging Clip............................................................................................................... 24 Controls for Music and Calls.. ..................................................................................... 29 Pairing. . ....................................................................................................................... 30 Multipoint.................................................................................................................... 32 ShareMe...................................................................................................................... 34 Smartwatches. . ........................................................................................................... 36 Troubleshooting.......................................................................................................... 37 Specs & Warranty....................................................................................................... 38 QUICK START OVE REM DO NOT PULL CORD A CH AT T “POWER ON” “SEARCHING FOR YOUR MUSIC DEVICE” “HEADPHONES CONNECTED” PAIRING 4 SEC PUSH LISTEN FOR VOICE PROMPT CUSTOMIZE YOUR SOUND SETTINGS AND SAVE THEM TO YOUR BUDS MYSOUND CHOOSE THE FIT OPTION/COMBINATION THAT WORKS BEST FOR YOU COMPLY TM EAR TIPS OVER-EAR SILICONE EAR FINS SILICONE EAR TIPS UNDER-EAR FOR RUNNERS SHORTEN CORD TO KEEP THE CONTROLLER SNUG. UNDER-EAR OVER-EAR MUSIC + CALLS SHARE ME PAIRING WITH COMPLETE REMOTE CONTROLS SHARE 1 DEVICE WITH 2 BUDS PAGE 21 PAGE 37 REMEMBER UP TO 8 DEVICES MULTIPOINT SMARTWATCH MYSOUND APP CONNECT YOUR BUDS TO 2 DEVICES SIMULTANEOUSLY LEAVE YOUR PHONE BEHIND & PAIR WITH YOUR SMARTWATCH CUSTOMIZE YOUR SOUND SETTINGS AND SAVE THEM TO YOUR BUDS PAGE 39 PAGE 22 PAGE 35 PAGE 32 Video instructions at jaybirdsport.com IN-THE-BOX 1. Freedom Bluetooth Headphones 2. 3 pairs Silicone Eartips (S,M,L) 1. 3. 3 pairs Comply TM Premium Foam 4. Eartips (S,M,L) 4. 3 Pairs Ear Fins (S,M,L) 5. USB Charging Cable 3. 2. 6. 2 Cord Management Clips 7. Cord Clip 8. Charging Clip 5. 9. Carry Pouch 7. 6. 8. 9. FIT GREAT SOUND PERFORMANCE IS IN SELECTING THE RIGHT SIZE EARTIP We love great sound. Make sure you hear it. Because everyone’s ears are different, be sure to try all sizes of eartips. Only with the right size eartips will you enjoy a snug fit & premium sound quality. SILICON EAR TIPS COMPLY TM PREMIUM SPORT FOAM EAR TIPS 10 COMPLY TM Premium Comply™ Foam ear tips exclusively designed for Jaybird Freedom deliver maximum noise isolation and comfort. Slide Comply Foam tip onto Freedom speaker housing. 11 Compress Comply Foam tip by rolling with fingers. Pull ea a deep entire Secure-Fit: Expands to give you a custom Noise Blocking: Allows you to enjoy your fit and remarkable in-ear retention. Your music in noisy environments without earbuds remain secure whether you’re in raising the volume. the gym, on the slopes, or on the go. Audio Experience: Creates an optimal Soft Comfort: Unique memory foam seal and channels sound directly into the provides all-day comfort, while ear canal, transforming your listening eliminating in-ear irritation and fatigue. experience. 15-30 seconds by 12 Pull ear back to open ear canal for a deeper more secure fit. Insert entire foam tip into ear. Hold in place 15-30 sec for foam to expand and create a seal. EAR FINS INSTALL YOUR PREFERRED SIZED SECURE FIT EAR FINS AS SHOWN. LEFT SIZE 13 LEFT / RIGHT RIGHT Slide the secure-fit ear fins back until the ridges in the fins line up with the grooves on the buds. 14 LOCK THE TIP OF THE EAR FIN INTO THE TOP OF THE BOWL OF THE EAR AS SHOWN. You should have a snug fit with contact on the lower, back and top portions of the bowl of the ear. 15 CORD MANAGEMENT CLIPS BEFORE FITTING, INSTALL THE CORD MANAGEMENT CLIPS TO REDUCE THE SLACK FOR A CUSTOMIZED FIT. 16 THE CORD CLIPS CAN BE USED IN THREE WAYS TO MANAGE THE LENGTH OF YOUR CORD AND FIND THE RIGHT FIT FOR YOU. 17 CORD CLIP USE THE INCLUDED CORD CLIP TO SECURE YOUR FREEDOM BUDS TO THE BACK OF YOUR SHIRT. 18 POWER ON PUSH 1 SEC PUSH 4 SEC PUSH MUSIC & CALLS PAIR HEADPHONES TO YOUR MUSIC DEVICE, PLAY MUSIC, AND TRY EACH SIZE OF EARTIP TO FIND THE BEST FIT AND SOUND PERFORMANCE. VOICE PROMPT: “Searching...” FROM OFF STATE HOLD FOR 4 SEC TO PAIR. FROM ON STATE HOLD 4 SEC TO POWER OFF. A proper seal is essential for you to fully appreciate the high quality audio of Freedom. MICROPHONE ALTERNATING RED & GREEN 19 ON MYSOUND APP TO CUSTOMIZE THE SOUND PROFILE ON YOUR NEW FREEDOM BUDS DOWNLOAD THE JAYBIRD MYSOUND APP IN THE APPLE OR GOOGLE PLAY STORE. WARMTH CUSTOMIZE Your new sound settings are saved right on your buds, so you can take your custom sound with you no matter where you go with any device you use. NOTE: The MySound app works with Jaybird Freedom. Other manufacturers and older Jaybird headphones are not supported. JAYBIRD SIGNATURE JAYBIRD ENHANCED WARMTH EXTENDED LISTENING REMOVE SHARPNESS R & B FREAK Jaybird Freedom 60% 20 DASHBOARD DISCOVER PROFILE MORE SAVE SOUND Save your new preset to your dashboard for easy access to all your favorite sound settings. Customize your sound settings. Changes are saved to your Freedom buds. SAVE HISTORY MUSIC Track through a history of your changes. Indicates if music is playing on your device. DEVICE DISCOVER Discover presets from athletes and other users. HISTORY Jaybird Freedom 60% 21 DASHBOARD DISCOVER PROFILE MORE See your connected device and battery status. CHARGING / BATTERY STATUS QUI ON CLIP ON BUDS 1 HR =PLAYTIME HRS PLAY TIME ARGE CK 20 MIN CH 4HRS 4HRS Charging the battery before use is recommended but not required. Freedom ships partially pre-charged, however initial charge will vary. Look for this Bluetooth headset battery status icon in the top right corner of your iPhone screen. Or this icon in the bottom right in the MySound app to see the status of Freedom’s battery. 22 90% BATTERY LEVEL The MySound App is able to report the battery level of your Freedom headphones to a 1% accuracy. When not connected to the MySound App, your Freedom headphones will announce an average battery level when you turn them on. Alternatively, an average battery level announcement can be triggered by pressing the Volume + or Volume – button when connected and not playing music. On your Freedom headphones the values are rounded to the nearest 20%. 26% reported in the App for example would result in the following prompt: “Battery 20 percent”. VOICE PROMPT When not playing music, pressing ‘Volume + or Volume –’ will announce battery status. MICRO USB CHARGING The charging clip that came with your buds also acts as a charging dock. 2.5 hrs for full charge gives 4 + 4 hours of playtime. 20 mins charging gives 1 hour of play time. The clip can also be charged separately and used at a later time. 23 ARE THE HEADPHONES ON? IS THE BATTERY LOW? In Standby* mode, push +, watch LED: Single Green Flash = 10% or more battery remaining Single Red Flash = Below 10% battery remaining No Light = Powered off *S tandby Mode: Powered and not connected to a device but not playing music or on a phone call. LED STATUS Red: Charging Green: Charged (while charger clip is attached) Red+Green Alternating: Pair Mode No Light: Standby / Play Mode / Phone Call / Powered Off CHARGING CLIP To charge your freedom buds, securely attach the charging clip to the back of the controller and insert the micro USB end of your included cable into the bottom end of the charging clip. Plug the other end into any 5V 500mA USB power source. This charges both your buds and the charging clip simultaneously for extended listening. RED LED = CURRENTLY CHARGING GREEN LED = FULLY CHARGED (with USB cable connected to a power source) 24 USING THE CHARGING CLIP TO CHARGE YOUR BUDS In addition to using the USB charging cable, your charging clip can charge your buds without having to be connected to a power source. Your charging clip has an internal battery and circuitry that extends your play time by 4 hours. Simply attach it to the back of the controller and it automatically start charging. Every time you attach the charging clip it will reset your buds by turning them off. You may turn the your buds ON and continue to listen to your music while the charging clip is attached and transferring power. NOTE: Although the freedom buds are sweatproof, the charging clip is not. Exposing to moisture or sweat will void the warranty. 25 4 HRS + 4 HRS = 8 HRS PLAY TIME Do not use your buds while the USB cable is plugged into a power source. Doing so could cause an electric shock if your power source develops an electrical fault. OVE REM ATTACHING & REMOVING THE CHARGING CLIP Attach the charging clip by pushing it directly onto the back of the controller until you feel it click securely in place. A CH AT T 26 When removing the charging clip apply pressure to the top of the controller and separate it from the charging clip. DO NOT PULL CORD When removing the clip DO NOT pull on the cord. Doing this may cause damage to your device. 27 CHARGING CLIP MICRO USB STANDARD USB Charge your buds/charging clip through any native 5V 500mA USB power source. If you use a USB wall or car adapter ensure that is supplies no more than 5V 500mA. USB adapters that supply more that 5V 500mA may harm smaller electronic devices and may void your warranty. We recommend using Jaybird approved USB wall and car adapters (available at jaybirdsport.com). 28 CONTROLS PUSH 1 SEC PUSH 4 SEC PUSH MUSIC & CALLS ADDITIONAL CALL COMMANDS Switch call to Freedom, Answer 2nd call, end call. Reject 1st/2nd call, switch between 2 calls, voice dial ON OFF Redial Mute & un-mute call When not on a call or playing music: Siri or Voice Commands 29 On center button activates If you have a 2nd incoming call: On center button will answer 2nd call, hold active and switch between active and hold PAIRING 1 . W ith headphones turned off, & within 1 meter (3 ft) of music device, press & hold center key for more than 4 sec until you see alternating red/green LED and a voice prompt saying “Searching for your music device”. 2. O n your phone/music device, turn Bluetooth on & have it search for Bluetooth devices. 3. C heck for “Freedom” and select (enter passcode 0000 if prompted). 4. F reedom voice prompt will say “headphones connected”. 5. I f the pairing is not successful, switch off headphones by pushing the center key for more than 4 seconds and repeat the steps outlined above. 30 Jaybird Freedom PAIRING WITH A BLUETOOTH ADAPTER 1. P lace headphones and mobile phone within 1 meter (3 feet) of each other. 2. P ut the headphones into pair mode as outlined on prior page. 3. I f using BAU Universal Bluetooth Adapter put into pair mode also (see BAU manual). 4. P lug the Bluetooth adapter into the music device and play a song. 5. T he headphones and adapter will pair automatically (passcode of adapter must be 0000). 6. A fter successful pairing and connecting, the headphones will say “Headphones connected”. 31 MULTIPOINT PAIRING WITH SEVERAL BLUETOOTH DEVICES Multipoint enables you to simultaneously pair and connect your buds with two different Bluetooth devices. For example you can have your Freedom buds connected to your laptop and your phone at the same time. You can listen to music from your laptop and are still able to answer an incoming call on your phone using your Freedom buds controller. Pretty wicked, eh?! 32 MULTIPOINT 1. P air your buds to the first device. Jaybird Freedom 2. P ut your buds back in pairing mode and then hold down the center button. 3. S earch and select your Freedom buds on the second device. 33 Jaybird Freedom SHARE ME Share the music you are listening to with another pair of Freedom buds. Follow these steps to connect a second pair of headphones. Love is in the air! 34 SHARE ME 1. P ower on both buds, with just one of the buds paired and connected to only one device. 2. P ush and hold Vol + on the connected buds, while you push and hold the Vol - button on the second buds until both device LEDs flash alternating red and green. oth buds will be connected when the LEDs stop flashing and “Headphones connected” will play on both buds. 3. P lay Music. 35 SMARTWATCHES With the right smartwatch you can leave your phone at home. Just sync music to your smartwatch and pair with your buds. Now that’s freedom! NOTE: Some smartwatches use a weaker Bluetooth signal strength which may cause possible intermittent signal drop. Works with smartwatches like: APPLE 36 SAMSUNG MOTOROLA TROUBLESHOOTING RESET If your buds are not responding, connect the charging clip and USB cable to a power source. This will turn your buds off and perform a soft reset. FACTORY RESET 1. T o reset your buds to their original factory settings put your buds in pairing mode by the turning the buds off then press & hold center button for more than 4 sec until you see alternating red/green LED. 2. W hile the LEDs are flashing red / green double tap the center button. Upon successful factory reset, the LED turns orange and the device turns off. 37 NOTE: Once your buds have been reset and you power on they will automatically go into pairing mode. Select “Forget” or “Remove” Jaybird Freedom from your device’s Bluetooth menu and pair again. LED SPECIFICATIONS Bluetooth Version 4.1, Multipoint Codecs SBC, Customized SBC, AAC (customized SBC codec offers high fidelity sound without needing APT-X) Profile Handsfree , Headset , A2DP , AVCRP , SPP Effective Range 10 meters (30 feet) Play Time 8 Hrs* (4 hrs on buds plus an additional 4 hrs with included charging clip) Standby Time 110 Hrs* AC Power DC 5V 500mA Charging Time 2.5 Hrs Quick Charge 20 Min = 1 Hr play time on buds + an extra hour through charging clip Dimensions 23 x 13 mm earbud size, 490 mm cord length Weight Approx 13 g * P lay time and standby time may vary due to usage conditions. Adding additional bass to your sound profile through the MySound app may slightly reduce play time. 38 WARNINGS, WARRANTY, CARE & MAINTENANCE Full warranty, care & maintenance details at jaybirdgear.com/warranty +1.866.244.3399 WARNING: Due to the isolating characteristics of these headphones do not use while driving, riding a bike or where vehicular traffic is present, or in any other activity where failure to hear surrounding sounds could be dangerous. Use of these headphones at excessive volumes may cause permanent hearing damage. Always turn the volume down before use. Take caution in regards to inserting objects into ear canal, use at own risk. Do not wear the device while it is connected to a power source driven from main 110V or 220V lines. Copyright 2016 Jaybird, LLC. All rights reserved. Jaybird, and the Jaybird logo are trademarks of Jaybird, LLC. Bluetooth is a trademark owned by Bluetooth SIG, Inc. USA, and licensed to Jaybird, LLC. iPhone is a trademark of Apple, Inc., registered in the U.S. and other countries. Manufactured under Freebit patent numbers EP2177045, US8630436, US8976995 and corresponding international patents. Assembled in Malaysia. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications to device will void the user’s authority to operate the device. The battery is recycled. Do not dispose of the battery in fire, as it may cause explosion. Administrative Regulations on Low Power Radio Waves Radiated Devices warning: Article 12 - Without permission granted by the NCC, any company, enterprise, or user is not allowed to change frequency, enhance transmitting power or alter original characteristic as well as performance to an approved low power radio-frequency devices. Article 14 - The low power radio-frequency devices shall not influence aircraft security and interfere legal communications; If found, the user shall cease operating immediately until no interference is achieved. The said legal communications means radio communications is operated in compliance with the Telecommunications Act. The low power radio-frequency devices must be susceptible with the interference from legal communications or ISM radio wave radiated devices. 39 LISTEN RESPONSIBLY Avoid excessive volume levels and prolonged periods of listening. Prolonged listening at excessive volume levels may cause permanent hearing disability. Do not use around road traffic. Video instructions at jaybirdsport.com NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1)this device may not cause interference, and(2) this device must accept any interference, includinginterference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables auxappareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes :(1) l'appareil ne doit pas produire de brouillage, et(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre lefonctionnement.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Encryption : Standard V2.3 (128-bit) User Access : Print, Extract, Print high-res XMP Toolkit : 3.1-701 Create Date : 2016:04:04 21:09:27-06:00 Metadata Date : 2016:05:18 15:54:15+08:00 Modify Date : 2016:05:18 15:54:15+08:00 Creator Tool : Adobe InDesign CC 2015 (Macintosh) Instance ID : uuid:e00b26cb-40a6-47e1-9583-3bd232cccb0b Original Document ID : xmp.did:89f289ea-5992-4ee6-8be2-c6569208e3ac Document ID : xmp.id:dc6328f2-dbb0-416d-9c11-f348bde3e2d0 Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:eaffb51b-d1ca-447e-bdc9-7dfd6e1e8f8e Derived From Document ID : xmp.did:018e0b3a-a938-4d49-9547-595795693be4 Derived From Original Document ID: xmp.did:89f289ea-5992-4ee6-8be2-c6569208e3ac Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CC 2015 (Macintosh) History Changed : / History When : 2016:04:04 21:09:27-06:00 Format : application/pdf Producer : Adobe PDF Library 15.0 Trapped : False Page Count : 42 Language : en-US Creator : Adobe InDesign CC 2015 (Macintosh)EXIF Metadata provided by EXIF.tools