Jds Uniphase Portable Optical Network Er Mts 8000 Users Manual 8000_promo_ss_ae

Portable Optical Network er MTS-8000 MTS 8000

MTS-8000 to the manual 733281ae-f374-49ee-8a06-691d18884b6b

2015-02-09

: Jds-Uniphase Jds-Uniphase-Portable-Optical-Network-er-Mts-8000-Users-Manual-566773 jds-uniphase-portable-optical-network-er-mts-8000-users-manual-566773 jds-uniphase pdf

Open the PDF directly: View PDF PDF.
Page Count: 4

DownloadJds-Uniphase Jds-Uniphase-Portable-Optical-Network-er-Mts-8000-Users-Manual- Mts-8000_promo_ss_ae  Jds-uniphase-portable-optical-network-er-mts-8000-users-manual
Open PDF In BrowserView PDF
ACTERNA TEST & MEASUREMENT SOLUTIONS

MTS-8000 Portable Optical Network Tester
All your optical network testing needs covered in a single platform
The power of one, performing
the work of many
A powerful unit
• Flexible scalable platform
• Industry-leading size and weight, e.g. platform + transport module < 7 kg
• Interchangeable modules
• Generates test results in seconds
• Fully automatic testing
• Combination of several tests
• Remotely controlled (via Ethernet, Fiber)

Fiber Characterization Testing
• Optical Time Domain Reflectometer
(OTDR)
• Chromatic Dispersion (CD)
• Polarization Mode Dispersion (PMD)
• Attenuation Profile (AP)
• Loss testing

OTDR Module
• More than 20 OTDR modules
• Combined wavelengths MM: 850/1300
SM: 1310/1383/1550/1625 nm
• Dynamic range 30 dB up to 50 dB

Pass/Fail OTDR analysis

Transport Module
• All in one module for
Full PDH/T-Carrier & SDH/SONET testing up to 10 Gb/s
Ethernet testing 10/100/1GigE/
10GigE LAN & WAN up to the IP layer

Dispersion Modules
• PMD – Polarization Mode Dispersion
• CD – Chromatic Dispersion

CWDM/DWDM Testing
• OSA with frequency range from 1250 nm to
1650 nm
• DWDM parameters OSNR, optical channel
power, wavelength deviation
• Application for EDFA and DFB testing
• Channel isolation for BER analysis
• Single or dual port analyzer
Amplified DWDM system analysis

WEBSITE: www.jdsu.com/fiberoptictest

MTS-8000 Tester

2
Fiber Characterization

Automatic bi-directional
measurement function
•
•
•
•
•

Built-in Optical Talkset
• Data transfer capability: file exchange or
remote control
• Used also for fully automatic bi-directional
measurements
• OTS-55 handheld for far end communication

Automate the acquisition process
Check fiber continuity
File transfer through the fiber
True splice loss with both end analysis
Optical talkset option needed

Data
Tested fiber
Remote

Bi-directional OTDR analysis

PC software solution for report generation

OFS-100 Results Analysis
• OTDR, CD, PMD, AP, and OSA results
analysis
• Batch processing capability via automation
process
• Pass/Fail function
• Customized printouts

OFS-200 FiberCable Acceptance
Report Generation
• Complete fiber characterization reporting
capability including bi-directional OTDR,
CD, PMD, AP, IL and ORL results
• Advanced OTDR evaluation for loop back
and mid-point management
• Powerful report preview
• Direct access keys for easy process and
efficiency

MTS-8000 00439
UHD 1310/1550/1625 nm

Local
MTS-8000 00286
UHD 1310/1550/1625 nm

Physical Fiber Testing
Key features OTDR
• Fast data acquisition enables VHD plug-in
to reach 40 dB after 10 s with a maximum
performance up to 45 dB
• Highest dynamic range with 50 dB at
1550 nm, UHD module
• New VLR module with outstanding dead
zone of 0.8 m EDZ and 4 m ADZ, 43 dB
dynamic
• Fastest scan speed at 0.1 s in real-time mode
• Up to 128000 acquisition points with sampling resolution down to 4 cm

PMD Module
• Fixed analyzer method standardized by
ITU-T, IEC and TIA/EIA
• Fast measurement time – from just
6 seconds
• Measure through multiple EDFAs

CD Module
• Pulse delay method complies with TIA/EIA
FOTP-168
• Fast single-end measurement with sectional
analysis capability
• CD analyzer and four-wavelength OTDR
(1310/1480/1550/1625 nm) with one module

Single menu for chromatic dispersion trace and table
display
1
1
1
2
1 3
1 4



PMD test results with Pass/Fail analysis


DUT
Polarized
Broadband
Source

Pulse delay method complies with TIA/EIA FOTP-168

Analyzer

OSA

MTS-8000 Tester

3
Transport Configuration

Secondary Port Bank
• 10/100/1000 Mb/s Ethernet
• 1 GigE Tx/Rx (850 nm, 1310 nm, 1550 nm)

Primary Port Bank
• 2.5 Gb/s, 622 Mb/s, and 155 Mb/s SDH/SONET
Tx/RX (1310 nm, 1550 nm)
• 10/100/1000 Mb/s Ethernet
• 1 GigE Tx/Rx (850 nm, 1310 nm, 1550 nm)

Optical Connection Check Interfaces
• High accuracy power meter
• Continuous wave power source
• Visual fault locator

10 Gb/s Port Bank
• 10 Gb/s SDH/SONET (1310 nm, 1550 nm)
• 10 GigE LAN & WAN (850 nm, 1310 nm, 1550 nm)

Port Bank #4
• T1 and E1 balanced and
unbalanced Tx/Rx

Port Bank #5
• E3, DS3, STS-1, E4 Tx/Rx
• STM-1 (e) Tx/Rx

Transport Module
• Contained in one 5 cm module
– PDH / T-carrier interfaces include
DS1, E1, E3, DS3, E4, STS-1 and STM-1e
– SDH/SONET interfaces (1310 nm, 1550 nm) include
155 Mb/s, 622 Mb/s, 2.5 Gb/s, 10 Gb/s
– Ethernet interfaces (850 nm, 1310 nm and 1550 nm)
include
10/100/1000 Mb/s electrical and 1 GigE Optical
– 10 GigE LAN + WAN
• Only 2.5 kg fully populated, total weight < 7 kg
• Fully scalable to meet your current and future needs
• Optical and electrical signal level measurements
• Up to 2.5 hours at 10 Gb/s rates with one battery
(2 batteries possible)
• Field exchangeable connectors for all standard connector
types

• SDH/SONET testing
– Mixed payload generation and analysis
– Concatenated signals
– Automatic Protection Switching (APS)
– Overhead byte manipulation and analysis
– Round Trip Delay (RTD)
• Ethernet testing
– Single and dual port Ethernet configuration
– Testing on Layer 1, 2 and 3 (IP)
– VLAN support
– Constant, burst and ramp traffic generation
– Traffic filter capabilities
– Automated RFC2544 testing
– Loop-up /loop-down of far end device

MTS-8000 Tester

Connector Inspection Scope
•
•
•
•
•

Fiber Connector Inspection Connectors
Patch panel inspection
250 or 400 magnification
Uses MTS-8000 large screen (10.4”)
Comparison with 3 other images on the same
screen
EFSCOPE250, EFSCOPE400: Optical video inspection probe

Insertion Loss Measurements

Built-in 635 nm Visual Fault Locator

Alternatively

• Power meter integrated in MTS-8000
mainframe
• Multi-wavelength laser source with CW or
modulated signals
• Easy loss measurements of a jumper or
patch cord

• Universal push/pull for all 2.5/1.25 mm
connector types

OVF-1 ball pen-sized separate visual fault
locator

OTS-55 SMART Optical Talkset
• ≥ 45 dB dynamic range
• Wavelength of operation: 1550 nm

Accessories

E80SCase3: Soft carrying case for
single module platform

E80HCase5: Hard carrying case for
single module configuration

Test & Measurement Regional Sales
NORTH AMERICA
TOLL FREE: 1 866 228 3762
FAX: +1 301 353 9216

LATIN AMERICA
TEL:+55 11 5503 3800
FAX:+55 11 5505 1598

E80keyB: USB keyboard

All statements, technical information and recommendations related to the products herein are based upon information believed to be reliable or accurate. However, the accuracy or completeness thereof is not guaranteed,
and no responsibility is assumed for any inaccuracies. The user assumes all risks and liability whatsoever in connection with the use of a product or its applications. JDSU reserves the right to change at any time without notice
the design, specifications, function, fit or form of its products described herein, including withdrawal at any time
of a product offered for sale herein. JDSU makes no representations that the products herein are free from any
intellectual property claims of others. Please contact JDSU for more information. JDSU and the JDSU logo are
trademarks of JDS Uniphase Corporation. Other trademarks are the property of their respective holders.
© 2006 JDS Uniphase Corporation. All rights reserved.

ASIA PACIFIC
TEL:+852 2892 0990
FAX:+852 2892 0770

EMEA
TEL:+49 7121 86 2222
FAX:+49 7121 86 1222

WEBSITE:

www.jdsu.com/fiberoptictest



Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Encryption                      : Standard V1.2 (40-bit)
User Access                     : Print, Fill forms, Extract, Assemble, Print high-res
Page Count                      : 4
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:0585196c-04c9-4ecd-96d2-9d7c664f51b2
Create Date                     : 2006:04:04 13:58:26Z
Metadata Date                   : 2006:05:23 12:09:25+02:00
Modify Date                     : 2006:05:23 12:09:25+02:00
Creator Tool                    : Adobe InDesign CS (3.0)
Rendition Class                 : proof:pdf
Derived From Instance ID        : 82145698-a53e-11da-ae8d-97af648d6627
Derived From Document ID        : adobe:docid:indd:bc3da740-9247-11da-b59b-e71cf4eeaba9
Document ID                     : adobe:docid:indd:f399bf4f-c3c1-11da-999f-8474cb617c3d
Manifest Link Form              : ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream
Manifest Reference Instance ID  : uuid:270411ef-0b19-11da-8c61-fa8b8f8c8836, uuid:270411ef-0b19-11da-8c61-fa8b8f8c8836, uuid:270411ef-0b19-11da-8c61-fa8b8f8c8836, uuid:d51e1509-eb0a-11da-82f4-dc56ca0fcd83
Manifest Reference Document ID  : adobe:docid:photoshop:270411ed-0b19-11da-8c61-fa8b8f8c8836, adobe:docid:photoshop:270411ed-0b19-11da-8c61-fa8b8f8c8836, adobe:docid:photoshop:270411ed-0b19-11da-8c61-fa8b8f8c8836, adobe:docid:photoshop:d51e1508-eb0a-11da-82f4-dc56ca0fcd83
Format                          : application/pdf
Title                           : mts-8000_promo_ss_ae.indd
Tagged PDF                      : Yes
Trapped                         : False
Creator                         : Adobe InDesign CS (3.0)
Producer                        : Adobe PDF Library 6.0
EXIF Metadata provided by EXIF.tools

Navigation menu