Jean Co J71H Color Monitor User Manual users manual

Download:
Mirror Download [FCC.gov]
Document ID	178129
Application ID	DmEbcPBMGWj3+Ao2RWOIYg==
Document Description	users manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	6.47kB (80883 bits)
Date Submitted	2001-11-07 00:00:00
Date Available	2001-11-06 00:00:00
Creation Date	2001-10-22 09:17:59
Producing Software	Acrobat Distiller 4.05 for Windows
Document Lastmod	2001-10-24 11:29:47
Document Title	users manual

Operation Instructions
Thank you for purchasing this monitor, a high-resolution multi-scan color monitor.
Please read this guide thoroughly before installation.
FCC RADIO FREQUENCY INTERFERENCE STATEMENT
WARNING: (FOR FCC CERTIFIED MODELS)
This monitor has been tested and found compliant with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
proper protection against harmful interference to a residential installation. This
monitor generates, uses, and can radiate radio frequency energy. Harmful interference
to radio communication may be led as a result if it‘s not properly installed and used.
However, there is no guarantee that interference will not occur in a particular
installation. If this monitor does cause serious interference to radio or television
reception, resetting the monitor may determine it. Moreover, users are encouraged to
correct interference by doing one or more of the following:
! Reorient or relocate the receiving antenna.
! Move the monitor and the receiver further away from each other.
! Connect the monitor into an outlet on a circuit different from that to which the
receiver is connected.
! Consult your local dealer or an qualified technician.
FCC Warning:
To assure a continued FCC compliance, a user must use a grounded power supply
cord and the provided shielded video interface cable with bonded ferrite cores. Also,
any unauthorized changes or modifications to this monitor would void the user‘s
authority to operate this device.
Note: If necessary, shielded interface cables and A.C. power cord must be used to
meet the emission level limits.
EMI Certification
The Class B digital apparatus meets all requirements of the Canadian
Interference-Causing Equipment Regulation.
Cet appareil numérique de classe B respecte toutes les exigences du Règlement sur le
matériel brouilleur du Canada.
Content
First Step......................................................................................1
Quick Installation.........................................................................1
Front Panel Control .....................................................................2
Rear Exterior................................................................................2
Feature .........................................................................................3
Using OSD function ....................................................................3
OSD Funtion................................................................................4
Timing Mode ...............................................................................5
Technical Information .................................................................6
Safety Precautions .......................................................................7
Care and Maintenance .................................................................8
First Step
Thank you for purchasing this monitor of high performance!
This monitor package comes with:
Video cable with 15 pin D-SUB connector.
Power cable.
User guidebook or CD-ROM (You’re reading now)
Quick Installation
1. Connect video cable
Make sure both the monitor
and computer are powered
OFF. Connect the video cable
to the computer, then to the
monitor.
4. Windows users:Setting the
Timing Mode (Resolution and
Refresh Rate)
Example: 800 x 600 @ 75 Hz
Resolution Right-click on the
Windows desktop > Porperties >
Settings > “Desktop Area”. Set
the resolution.
Refresh Rate (vertical frequency)
See your graphic card’s user
guide for instructions.
2. Connect power cord
Connect the power cord to a
properly grounded AC outlet,
then to the monitor.
3. Power-ON computer and
monitor
Power-ON the computer, then
Power-ON the monitor.
D-Sub
Power
Front Panel Control
❻ ❺ ❹ ❸
❷
❶
❶ POWER ON/OFF SWITCH
❹ INCREASE BUTTON
❷ POWER ON/OFF INDICATOR
❺ DECREASE BUTTON
❸ FUNCTION
❻ FUNCTION
Rear Exterior
❼
❼ AC SOCKET
❽ 15 PIN D-TYPE CONNECTOR
❽
Feature
This monitor has an adapted advance CPU to control the Contrast, Brightness,
Zoom, H-phase, H-size, V-center, V-Size, Pincushion, Trapezoid,
Parallelogram, Pin-balance, Rotation, Color temperature, Morie, Language,
Degauss.
Using OSD function
Press 1
with
2 function buttons to activate OSD functions and adjust
34 to change function parameter.
OSD Function
ICON
ITEM
CONTRAST
DESCRIPTION
Increases/decreases video gain.
BRIGHTNESS
Increases/decreases raster black level.
ZOOM
Zoom In or Zoom Out the video pattern.
HORIZONTAL
POSITION
HORIZONTAL SIZE
Adjusts the H-phase of the picture.
Adjusts the H-width of the picture.
VERTICAL POSITION
Adjusts the vertical placement of the
picture .
Adjusts the vertical size of the picture .
VERTICAL SIZE
MEMORY RECALL
When use PRESET MODE press - or
+ to recall the factory default .
PINCUSHION
Controls the side distortion.
TRAPEZIOD
Controls the top of the H-width equal to
the bottom of the picture .
Controls the vertical line on both sides
to become slope and symmetry.
Controls the vertical line on both sides
to become parabola and symmetry.
Controls the tilt of the display image .
PARALLELOGRAM
PIN-BALANCE
TILT
COLOR
Selects color temperature & adjust user
color mode.
Degausses the screen.
DEGAUSS
LANGUAGE
Multi-language select.
Use - and + key to select OSD display
language.
Adjust OSD Position.
OSD POSITION
MESSAGE
Shows current horizontal & vertical
frequency & mode type.
Timing Mode
Timing modes of 70KHz
Industry
640 x 350 @ 70HZ
Industry
640 x 480 @ 60HZ
VESA
720 x 400 @ 70HZ
VESA
640 x 480 @ 75HZ
VESA
720 x 400 @ 85HZ
VESA
640 x 480 @ 85HZ
VESA
800 x 600 @ 72HZ
VESA
800 x 600 @ 75HZ
VESA
1024 x 768 @ 60HZ
VESA
800 x 600 @ 85HZ
VESA
1024 x 768 @ 75HZ
VESA
1024 x 768 @ 85HZ
Technical Information
Technical Specification
CRT
Input Signal
Power saving
modes
Size
Scanning Freq.
17-Inch Flat Type (Flat tube model)
17-Inch Flat Square Type (Traditional
Model)
16”
Flat 0.25mm / Traditional 0.27mm
90°
RGB Analogue 0.7 Vpp 75 Ohms
H/V. Separated, TTL.
Level Positive or Negative.
H: 30–70 KHz/V: 50-120 Hz
DPMS Off
<5W(orange LED)
Viewable Size
Dot Pitch
Deflection
Video Signal
Sync. Signal
POWER SOURCE:
Power Supply
Normal CRT
70KHZ
Consumption
Flat CRT
70KHZ
AC 100-240V, 60Hz/50Hz.
<75W.
Power Supply
AC 100-240V, 60Hz/50Hz.
Consumption
80W Max.
Safety Precautions
This monitor is manufactured and tested on a ground principle that a user’s
safety comes first. However, improper use or installation may result danger
to the monitor as well as to the user. Carefully go over the following
WARNINGS before installation and keep this guide handy.
WARNINGS:
This monitor should be operated only at the correct power sources
indicated on the label on the rear end of the monitor. If you’re unsure of
the power supply in your residence, consult your local dealer or power
company.
Do not try to repair the monitor yourself as it contains no
user-serviceable parts. The monitor should only be repaired by a
qualified technician.
Do not remove the monitor cabinet. There is highvoltage parts inside
that may cause electric shock to human bodies, even when the power
cord is disconnected .
Stop using the monitor if the cabinet is damaged. Have it checked by a
service technician.
Put your monitor only in a clean, dry environment. Unplug the monitor
immediately if gets wet and consult your service technician.
Always unplug the monitor before cleaning it. Clean the cabinet with a
clean, dry cloth. Apply non-ammonia based cleaner onto the cloth, not
directly onto the glass screen.
Keep the monitor away from magnetic objects, motors, TV sets, and
transformer.
Do not place heavy objects on the cable or power cord.
For Pluggable Equipment, the Socket-outlet shall be installed near the
equipment and shall be easily accessible.
Care and Maintenance
Care
! Avoid exposing your monitor directly to sunlight or other heat source.
Place your monitor away from the sun to reduce glare.
! Put your monitor in a well ventilated area. Do not place anything heavy
on top of your monitor.
! Make certain your monitor is installed in a clean and moisture-free area.
! Keep your monitor away from magnets, motors, transformers, speakers,
and TV sets.
Safety Tips:
! If smoke, abnormal noise or odor came out of your monitor, switch off
the power immediately and call your service center.
! Never remove the rear cover of your monitor cabinet. The display unit
inside contains high-voltage parts and may cause electric shock to human
bodies.
! Never try to repair your monitor yourself. Always call your
service center or a qualified technician to fix it.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Create Date                     : 2001:10:22 09:17:59
Producer                        : Acrobat Distiller 4.05 for Windows
Modify Date                     : 2001:10:24 11:29:47+08:00
Page Count                      : 10

EXIF Metadata provided by EXIF.tools