Jebsee Electronics TR-6000 2.4G Wireless Audio Sender User Manual U0805019
Jebsee Electronics Company Ltd 2.4G Wireless Audio Sender U0805019
Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 639546 |
| Application ID | tbpGFyPmmvpWfobHF8GcpA== |
| Document Description | Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 97.89kB (1223645 bits) |
| Date Submitted | 2006-03-22 00:00:00 |
| Date Available | 2006-03-22 00:00:00 |
| Creation Date | 2006-02-22 11:34:03 |
| Producing Software | Corel PDF Engine Version 9.397 |
| Document Lastmod | 2006-03-09 17:16:24 |
| Document Title | U0805019 |
| Document Creator | CorelDRAW Version 9.397 |
| Document Author: | B3 |
2. Transmitter is USB connector, it can be plugged into an USB port of MP3 music player using Windows 2000 and above systems. PRODUCT FEATURES 1. Super high frequency for wireless stereo digital audio sender. 3. There is no sound from horn or earphone of receiver, try to check if the LED on USB connector is flashing, if not, please re-plug USB connector to play songs. 4. The AC adapter, which comes with this system, should not be plugged into the same outlet with other appliances to reduce interference probability. Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: 2. Transmitter is USB connector, it can be plugged into an USB port of MP3 music player using Windows 2000 or above system. 3. High frequency can prevent interference and provides best audio quality. 4. Receiver converts the received digital signal into analog and outputs the analog signal to speakers or broadcast speakers. 5. Can be installed easily. LIST OF PACKAGED CONTENTS 1. One transmitter USB STEREO AUDIO SENDER 2. One receiver ES R EL NDE WIR SE R DIO IV AU ECE 1. Reorient or relocate the receiving antenna. 2. Increase the separation between the equipment and receiver. 3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 3. One power adapter (output : 9V 200mA) 4. Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. IMPORTANT NOTE: FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth fo r an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. FEATURES Transmitter 1. Channel selection button USB STEREO Receiver 1. Right audio input (white) 2. Left audio input (red) 3. Earphone output 4. Channel selection button 5. Power input (9V 200mA) WIRELESS AUDIO SENDER RECEIVER This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter AUDIO SENDER CONNECTING THE TRANSMITTER Connect earphone's 3.5 mm stereo connector to the receiver's output earphone. Connect transmitter to PC 1. Connect transmitter to PC's USB port. When MP3 Broadcast Software broadcasts music, the transmitter's LED will be flashing. This indicates that MP3 audio has sent out normally. 2. If during MP3 broadcasting, USB connector is pulled out, then re-plug in again. The LED at the USB connector will not be flashing the music must be re-chosen again in the MP3 Broadcast Software. The LED at the USB connector will start flashing again. Earphone SPECIFICATIONS PC USB STEREO AUDIO SENDE CONNECTING THE RECEIVER Connect receiver to speaker 1. Connect speaker's 3.5 mm stereo connector to the receiver's earphone. Earphone Speaker 2. If the user's speaker is RCA cable based, then connect to the receiver's R/L output jacks. 3. If the speaker cable connecting to the receiver's R/L output jacks is not RCA cable, one can consider using a 3.5 mm stereo to RCA cable converter. Then it can connect to the receiver's R/L output jacks. 4. Plug the power source into receiver's power input jack. Connect receiver to earphone Audio Speaker TRANSMITTER : Frequency range ........................................... 2400MHz~2483.5MHz Modulation .................................................... FSK Channel number ........................................... 8 Channel spacing .......................................... 9MHz Channel frequency ....................................... 2410MHz, 2419MHz~2473MHz Frequency stability ....................................... Âą100KHz RF output ..................................................... 9.14 dBm Audio Input .................................................... USB MAIL - Jack (V1.1) Ant. Type & Gain ........................................... Inverted-F / 0dBi RECEIVER : Frequency range .......................................... 2400MHz~2483.5MHz Channel number ........................................... 8 Channel spacing ........................................... 9MHz Channel frequency ....................................... 2410MHz, 2419MHz~2473MHz Frequency stability ....................................... Âą100KHz Ant. Type ...................................................... Inverted-F Audio Output level ....................................... 3.4 Vp-p (Max at 4Vp-p IN) Audio Output impedance ............................. Response (I/L) .............................................. SNR (Signal Noise Ratio) ............................. Power Requirement ..................................... RCA Jack (L&R), <1KW 20Hz~20KHz, -3dB 87dB (Typical) 9V 200mA ACadapter NOTES FOR INSTALLING THIS SYSTEM 1. This system is a wireless communication product. The installation location should have no blockage to avoid interfering with transmission and reception. The distance between sender and receiver should be greater than 30 metres to have every sender transmit its best signal strength.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Encryption : Standard V1.2 (40-bit) User Access : Print, Copy, Fill forms, Extract, Assemble, Print high-res Modify Date : 2006:03:09 17:16:24+08:00 Create Date : 2006:02:22 11:34:03Z Page Count : 3 About : uuid:c16c6d34-fe0e-4517-9243-599f242124ff Producer : Corel PDF Engine Version 9.397 Mod Date : 2006:03:09 17:16:24+08:00 Creation Date : 2006:02:22 11:34:03Z Author : B3 Creator Tool : CorelDRAW Version 9.397 Metadata Date : 2006:03:09 17:16:24+08:00 Document ID : uuid:fd636374-4a8f-472b-b320-7fbf53be2b79 Format : application/pdf Title : U0805019 Creator : B3 Has XFA : NoEXIF Metadata provided by EXIF.tools