Jebsee Electronics TR-7000 2.4GHz Wireless Audio Sender User Manual TR 7000

Jebsee Electronics Company Ltd 2.4GHz Wireless Audio Sender TR 7000

Manual

GHz
LIST OF PACKAGED CONTENTSPRODUCT FEATURES2. One receiver 1. One transmitter 3. Two power adapter (output : 9V 200mA)11. Transmitter / receiver as one set, it has stereo function.2. Transmitter is RCA Jack, it can be connected to DVD, VCD, game, Hi-Fi, etc, audio output. 3. It is transmitted at 2.4GHz (converts the original analog signal into digital, and transmits via RF).4. Receiver is RCA Jack; it outputs the received signal to speakers or broadcast speakers.5. Can be installed easily.6. Low fidelity loss, good anti-interferece and transmission distance is greater than 30 meters.7. Eight channels; the receiver switches channel automatically if there is interference.
Line-In4FEATURESTransmitter1. Right audio input (red)2. Left audio input (white)3. Earphone output4 Channel selection button. Power input (9V 200mA). 5Receiver 1235WIRELESSAUDIO SENDERRECEIVERWIRELESSAUDIO SENDERTRANSMITTER1. Right audio input (red)2. Left audio input (white)3. Line-in input4 Channel selection button. Power input (9V 200mA). 512354Line-InCONNECTING THE TRANSMITTER 1. Insert RCA Jacks or line-in connector of transmitter into the sound card audio output of supportive PC. 2. Plug the power source into transmitter power jack . 3. Play MP3 songs through MP3 software, which delivers MP3 sound out by transmitter module.Connect transmitter to PCPCWIRELESSAUDIO SENDERTRANSMITTERConnect transmitter to other audio output equipment 1. Insert RCA Jacks or line-in connector of transmitter module to supportive audio output devices, deliver the sounds from devices with transmitter module. 2. Plug the power source into transmitter power jack . MP3Line-InRLAudioVCR/VCD/DVDPLAYONOFFSPLPDVD PlayersCONNECTING THE RECEIVER Connect receiver to speaker1. Connect speaker's 3.5 mm stereo connector to the receiver's earphone.2. If the user's speaker is RCA cable based, then connect to the receiver's R/L output jacks.3. If the speaker cable connecting to the receiver's R/L output jacks is not RCA cable, one can consider using a 3.5 mm stereo to RCA cable converter. Then it can connect to the receiver's R/L output jacks. 4. Plug the power source into receiver's power input jack . EarphoneRLSpeakerAudioSpeakerConnect earphone's 3.5 mm stereo connector to the receiver's outputearphone. Connect receiver to earphoneEarphoneLine-In32
SPECIFICATIONSTRANSMITTER : Frequency range ........................................... 2400MHz~2483.5MHzModulation .................................................... FSKChannel number ........................................... 8Channel spacing .......................................... 9MHzChannel frequency ....................................... 2 410MHz, 2 419MHz~2473MHzFrequency stability ....................................... ± 100KHzRF output level ............................................. 10.6dBm Audio Input level ........................................... 4 Vp-p (Max.)Audio Input .................................................... RCA Jack (L&R), >10KW Frequency range .......................................... 2400MHz~2483.5MHzChannel number ........................................... 8Channel spacing ........................................... 9MHzChannel frequency ....................................... 2410MHz, 2419MHz~2473MHzFrequency stability ....................................... ±100KHzAnt. Type ...................................................... Inverted-FAudio Output level ....................................... 3.4 Vp-p (Max at 4Vp-p IN)Audio Output impedance ............................. RCA Jack (L&R), <1KWResponse (I/L) .............................................. 20Hz~20KHz, -1dBSNR (Signal Noise Ratio) ............................. 87dB (Typical)Power Requirement ..................................... 9V 200mA ACadapter RECEIVER : 54 1. This system is a wireless communication product. The installation location should have no blockage to avoid interfering with transmission and reception. The distance between sender and receiver should be greater than 30 metres to have every sender transmit its best signal strength. 2. Check if the LED of transmitter & receiver module are lightening, if DC-plug is inserted well and if there is power supply from adapter, as the MP3 sounds are not to be received through horns or earphones. 3. The AC adapter, which comes with this system, should not be plugged into the same outlet with other appliances to reduce interference probability. 4. Please send back to service dept, if problems are not able to be solved. NOTES FOR INSTALLING THIS SYSTEMFederal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: 1. Reorient or relocate the receiving antenna. 2. Increase the separation between the equipment and receiver. 3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 4. Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by theparty responsible for compliance could void the user's authority to operatethis equipment. This device complies with Part 15 of the FCC Rules. Operation is subject tothe following two conditions: (1) This device may not cause harmfulinterference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter IMPORTANT NOTE:  Ant. Type & Gain .......................................... Inverted-F / 0dBi

Navigation menu