Jebsee Electronics TR-7000 2.4GHz Wireless Audio Sender User Manual TR 7000

Jebsee Electronics Company Ltd 2.4GHz Wireless Audio Sender TR 7000

Manual

GHz
LIST OF PACKAGED CONTENTS
PRODUCT FEATURES
2. One receiver
1. One transmitter
3. Two power adapter
(output : 9V 200mA)
1
1. Transmitter / receiver as one set, it has stereo function.
2. Transmitter is RCA Jack, it can be connected to DVD, VCD, game, Hi-Fi, etc,
audio output.
3. It is transmitted at 2.4GHz (converts the original analog signal into digital, and
transmits via RF).
4. Receiver is RCA Jack; it outputs the received signal to speakers or broadcast
speakers.
5. Can be installed easily.
6. Low fidelity loss, good anti-interferece and transmission distance is greater
than 30 meters.
7. Eight channels; the receiver switches channel automatically if there is
interference.
Line-In
4
FEATURES
Transmitter
1. Right audio input (red)
2. Left audio input (white)
3. Earphone output
4 Channel selection button
. Power input (9V 200mA)
.
5
Receiver
1
2
3
5
WIRELESS
AUDIO SENDER
RECEIVER
WIRELESS
AUDIO SENDER
TRANSMITTER
1. Right audio input (red)
2. Left audio input (white)
3. Line-in input
4 Channel selection button
. Power input (9V 200mA)
.
5
1
2
3
5
4
Line-In
CONNECTING THE TRANSMITTER
1. Insert RCA Jacks or line-in connector of transmitter into the sound
card audio output of supportive PC.
2. Plug the power source into transmitter power jack .
3. Play MP3 songs through MP3 software, which delivers MP3 sound
out by transmitter module.
Connect transmitter to PC
PC
WIRELESS
AUDIO SENDER
TRANSMITTER
Connect transmitter to other audio output equipment
1. Insert RCA Jacks or line-in connector of transmitter module to
supportive audio output devices, deliver the sounds from devices
with transmitter module.
2. Plug the power source into transmitter power jack .
MP3
Line-In
R
L
Audio
VCR/VCD/DVD
PLAY
ON
OFF
SP
LP
DVD Players
CONNECTING THE RECEIVER
Connect receiver to speaker
1. Connect speaker's 3.5 mm stereo connector to the receiver's earphone.
2. If the user's speaker is RCA cable based, then connect to the receiver's
R/L output jacks.
3. If the speaker cable connecting to the receiver's R/L output jacks is not
RCA cable, one can consider using a 3.5 mm stereo to RCA cable
converter. Then it can connect to the receiver's R/L output jacks.
4. Plug the power source into receiver's power input jack .
Earphone
R
L
Speaker
Audio
Speaker
Connect earphone's 3.5 mm stereo connector to the receiver's output
earphone.
Connect receiver to earphone
Earphone
Line-In
3
2
SPECIFICATIONS
TRANSMITTER :
Frequency range ........................................... 2400MHz~2483.5MHz
Modulation .................................................... FSK
Channel number ........................................... 8
Channel spacing .......................................... 9MHz
Channel frequency ....................................... 2 410MHz, 2 419MHz~2473MHz
Frequency stability ....................................... ± 100KHz
RF output level ............................................. 10.6dBm
Audio Input level ........................................... 4 Vp-p (Max.)
Audio Input .................................................... RCA Jack (L&R), >10KW
Frequency range .......................................... 2400MHz~2483.5MHz
Channel number ........................................... 8
Channel spacing ........................................... 9MHz
Channel frequency ....................................... 2410MHz, 2419MHz~2473MHz
Frequency stability ....................................... ±100KHz
Ant. Type ...................................................... Inverted-F
Audio Output level ....................................... 3.4 Vp-p (Max at 4Vp-p IN)
Audio Output impedance ............................. RCA Jack (L&R), <1KW
Response (I/L) .............................................. 20Hz~20KHz, -1dB
SNR (Signal Noise Ratio) ............................. 87dB (Typical)
Power Requirement ..................................... 9V 200mA ACadapter
RECEIVER :
5
4
1. This system is a wireless communication product. The installation
location should have no blockage to avoid interfering with
transmission and reception. The distance between sender and
receiver should be greater than 30 metres to have every sender
transmit its best signal strength.
2. Check if the LED of transmitter & receiver module are lightening,
if DC-plug is inserted well and if there is power supply from
adapter, as the MP3 sounds are not to be received through horns
or earphones.
3. The AC adapter, which comes with this system, should not be
plugged into the same outlet with other appliances to reduce
interference probability.
4. Please send back to service dept, if problems are not able to be
solved.
NOTES FOR INSTALLING THIS SYSTEM
Federal Communication Commission
Interference Statement
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one of the following measures:
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
4. Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the
party responsible for compliance could void the user's authority to operate
this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth fo
r an uncontrolled environment. This equipment should be installed and
operated with minimum distance 20cm between the radiator & your body.
This transmitter must not be co-located or operating in conjunction with
any other antenna or transmitter
IMPORTANT NOTE:
Ant. Type & Gain .......................................... Inverted-F / 0dBi

Navigation menu