Jetlun RD77762 ZigBee Temperature Humidity Sensor User Manual RD77762UG 1 1

Jetlun (Shenzhen) Corporation ZigBee Temperature Humidity Sensor RD77762UG 1 1

UserManual.wiki >

RD77762 User Manual

Users Manual

UserGuiderev1.0Temperature&HumiditySensorUserGuide(RD77762)88PARKGROVEDRIVE|SOSANFRANCISCO|CA|94080|USAT:+18664982703|F:+16503601977

Jetlun CorporationTemperature & Humidity Sensor User Guide rev 1.1 3 DOC#: UG-RD77762-1.0  Table of Contents 1.0ABOUT THIS GUIDE ............................................................................................................ 41.1BECOMING FAMILIAR WITH THIS USER GUIDE........................................................................ 41.1.1 Quick Reference............................................................................................................ 41.1.2 Icon Descriptions........................................................................................................... 41.2GETTING ADDITIONAL HELP ................................................................................................. 41.3SENDING FEEDBACK REGARDING THIS DOCUMENTATION...................................................... 42.0 PRODUCT OVERVIEW ....................................................................................................... 52.1PACKAGE CONTENTS ........................................................................................................... 52.2IMPORTANT SAFETY INFORMATION....................................................................................... 52.3FRONT PANEL...................................................................................................................... 52.3 SIDE PANEL ............................................................................................................................ 63.0INSTALLING THE JETLUN TEMPERATURE & HUMIDITY SENSOR.............................. 73.1 INSTALL THE TEMPERATURE & HUMIDITY SENSOR............................................................... 73.1.1 To Join the Network .......................................................................................................73.1.2 To Leave the network..................................................................................................... 74.0 TROUBLESHOOTING .............................................................................................................85.0 TECHNICAL SPECIFICATIONS ....................................................................................... 10 List of Figures Figure 1: Front Panel of the Temperature & Humidity Sensor....................................................... 6Figure 2: Side Panel of the applicne module ................................................................................. 6 List of Tables Table 1: Where to find information in this User Guide ................................................................... 4Table 2: Icon descriptions............................................................................................................... 4Table 3: Front Panel LED Description............................................................................................6Table 4: Back Panel of the Temperature & Humidity Sensor Description..................................... 6

Jetlun CorporationTemperature & Humidity Sensor User Guide rev 1.1 4 DOC#: UG-RD77762-1.0 1.0 ABOUT THIS GUIDE 1.1 Becoming familiar with this User Guide 1.1.1 Quick Reference The Jetlun Temperature & Humidity Sensor (RD77762) User Guide describes the following: Table 1: Where to find information in this User Guide Planning and Installing the Jetlun Temperature & Humidity Sensor Chapter 2 and 3 1.1.2 Icon Descriptions While reading through the User Guide, you may see various icons that call attention to specific items. Below is a description of these icons: Table 2: Icon descriptions NOTE: This mark indicates that there is a note of interest and is something that you should pay attention to while using the product. IMPORTANT: This mark identifies an indication that you should watch for, or reiterates something that you should always keep in mind. WARNING: This exclamation point indicates that there is a caution or warning and may be something that could damage your property or project. 1.2 Getting Additional Help To get information or assistance for problems that you encounter, please contact Jetlun Technical Support by emailing support@jetlun.com. Please always include with all inquiries the following information: • Product name, model number, part number (if applicable) and serial number • A description of the devices connected to your Gateway or a system configuration • The circumstances surrounding the error or failure • A detailed description of the problem and what has been done to try to resolve it 1.3 Sending Feedback regarding this Documentation We welcome your feedback on Jetlun Gateway documentation. This includes feedback on the structure, content, accuracy, or completeness of our documents, and any other comments you may have. Please send your comments to docs@jetlun.com.

Jetlun CorporationTemperature & Humidity Sensor User Guide rev 1.1 5 DOC#: UG-RD77762-1.0 2.0 PRODUCT OVERVIEW Thank you for choosing the JIM Temperature & Humidity Sensor (RD77762). The Temperature & Humidity Sensor is a ZigBee® sensor designed to monitor the current temperature and humidity of the ambient environment. When used in conjunction with the Jetlun Gateway, temperature and humidity can be reported to you on a regular basis. You can even configure email or SMS alerts to be sent to you if the temperature or humidity reaches certain set points. The JIM Temperature & Humidity Sensor has the following features: • ZigBee Wireless enabled • Reports temperature in Fahrenheit or Celsius • Low battery indicator 2.1 Package Contents When you first open the box, please check and confirm that the following items are all included: • 1x Temperature & Humidity Sensor RD77762 • 1x Quick Installation Guide • 1x Warranty Guide Contact the retailer where you made your purchase if any of these parts are incorrect, missing or damaged. Keep the carton, including the original packaging materials in case you need to return the unit for repair. 2.2 Important Safety Information Please read all documentation and retain documentation for future reference. Follow all warnings, alerts and instructions. Important: • DO NOT Use the RD77762 near water • DO NOT Place the RD77762 near any heat source such as radiators, heaters, stoves, or other apparatus that produce heat • DO NOT Open the device housing or alter the product in any way • DO NOT Dispose of electrical appliances as unsorted municipal waste. Contact your local government for information regarding separate collection facilities 2.3 Front Panel

Jetlun CorporationTemperature & Humidity Sensor User Guide rev 1.1 6 DOC#: UG-RD77762-1.0  Figure 1: Front Panel of the Temperature & Humidity Sensor Table 3: Front Panel LED Description The Power LED lights up RED when the battery volume is low. The Zigbee ACT LED blinks green when the temperature and humidity senseor receives/sends the data. The Zigbee ACT LED is solid green for 300 seconds when the temperature and humidity sensor joins the zigbee network. 2.4 Side Panel Figure 2: Side Panel of the applicne module Table 4: Back Panel of the Temperature & Humidity Sensor Description The Zigbee Network button is applied for the Temperature & Humidity Sensor to join or leave the network. Press the Zigbee Network button once to join the network if the sensor is not in the network. To remove the sensor from the network, press the Zigbee Network button once to leave the network.

Jetlun CorporationTemperature & Humidity Sensor User Guide rev 1.1 7 DOC#: UG-RD77762-1.0 3.0 INSTALLING THE JETLUN TEMPERATURE & HUMIDITY SENSOR Follow these quick steps to install your Jetlun Temperature & Humidity Sensor. 3.1 Install the Temperature & Humidity Sensor 3.1.1 To Join the Network Â STEP 1: Press and release the Zigbee network button for 3-5 seconds and then release the button. The Zigbee ACT LED should be blinking. Â STEP 2: The Temperature & Humidity Sensor will join the network within 1 minute. The Zigbee ACT LED should be solid green for 300 seconds. NOTE: If the Temperature & Humidity Sensor fails to join the ZigBee network, please enter the Gateway utility web interface and check the following items: 1. The Zigbee network is formed. 2. The Zigbee network allows the Zigbee device to join the network. 3. Retry Step 1 3.1.2 To Leave the network Â STEP 1: Press and hold the Zigbee network button for 8-10 seconds and then release the button. The ACT LED is blinking for about 3 seconds and then it is off. Â STEP 2: The Temperature & Humidity Sensor has left the network successfully when the ACT LED is off.

Jetlun CorporationTemperature & Humidity Sensor User Guide rev 1.1 8 DOC#: UG-RD77762-1.0 4.0 TROUBLESHOOTING Q. The Temperature & Humidity Sensor fails to join the Zigbee network? A: Check the configuration of the Gateway or RD75613 and assure that the network is formed. Then refer to section 3.1.1 (To join the network) of the manual and follow all steps to retry join the network Q. The Power LED is solid red or blinking red? A: The Red LED indicates low battery. Simply change out the old batteries with new ones and LED should automatically revert to green. Change out battery procesure: Â STEP 1: Screw out the screw in the bottom panel using screwdriver Â STEP 2: Open the bottom panel. Â STEP 3: Use the new battery instead the old one Â STEP 4: Close the bottom panel and screw the screw. Q: Join the Temperature & Humidity sensor to the Gateway Zigbee network through RD75613? A: The procedure is following: Â STEP 1: Form the Zigbee Network through the RD75613. 1. Enter the Gateway utility web Home Area Network > Control interface 2. Select the RD75613 (Appliance module) whose Zigbee network the temperature & humidity sensor will join and click the button 3. Enter the Zigbee network button, and enter the Chanel ID, Power Level and Pan ID. (If the Zigbee network is formed, you can directly jump to item 5.) Channel ID is digit from 11 to 26 Power Lever is digit from 1 to 3 Pan ID must be 4 bits Hex 4. Click the Form button. When the network is formed, the name of Form button is changed to “Leave”. 5. Select the Permit join choice and click Execute button. Explain of permit join choices: Deny: No sensors can join the network Join any time: All sensors can zigbee network at any time.

Jetlun CorporationTemperature & Humidity Sensor User Guide rev 1.1 9 DOC#: UG-RD77762-1.0 Permit join for XX seconds: Sensors can join the network within XX seconds. NOTE: Permit join setting should be reset when the appliance module is rebooting. Â STEP 2: Temperature & Humidity sensor joins the network 1. Press and release the Zigbee network button for 3-5 seconds and then release the button. The Zigbee ACT LED should be blinking. 2. The Temperature & Humidity Sensor will join the network within 1 minute. The Zigbee ACT LED should be solid green for 300 seconds NOTE: If the Temperature & Humidity Sensor fails to join the ZigBee network, please enter the Gateway utility web home area network > Control > Zigbee network interface (Refer the Step 1) and check the following items: 1. The Zigbee network is formed. 2. The Zigbee network allows the Zigbee device to join the network. 3. Retry Step 2 Â STEP 3: Temperature & Humidity sensor leaves the network 1. Press and release the Zigbee network button for 8-10 seconds and then release the button. The ACT LED is blinking for about 3 seconds and then it is off. 2. The Temperature & Humidity Sensor has left the network successfully when the ACT LED is off.

Glossary Zigbee is a low-speed, low powered 802.15.4 wireless mesh standard established by the Zigbee Alliance. The Zigbee Alliance is a non-profit Standard organization made up 300+ companies driving development of ZigBee wireless technology. For more information, visit www.zigbee.org. Zigbee is the only wirleess technology standard that has been listed under NIST as 1 of the 13 Smart Grid interoperability standards. For more information about NIST, please visit www.nist.gov.......6, 10, 11, 12 z FCC Notices 1. The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment. 2. This device complies with Part 15 of the FCC Rules. (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 3. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help.

Jetlun Corporation 88 Parkgrove Drive So San Francisco CA 94080 USA www.jetlun.com sales@jetlun.com support@jetlun.com 1-866-498-2703

Navigation menu