JiangSu HuiTong Group JSHT-YKF431 BLE Remote Control Transmitter User Manual

JiangSu HuiTong Group Co.,Ltd BLE Remote Control Transmitter Users Manual

Users Manual

Remote control brief instructions1. Remote control appearance drawingYKF431-B002
2. Remote control pairingAfter powering on the remote control, the remote control gets intothe state of radio, at this time the host can search to a Bluetoothdevice which is named as BLE Remote Control Transmitter, thenselecting pairing , after successful pairing,we can normally usethe Bluetooth key and speech recognition3. Remote control speech recognitionAfter the matching of the remote control is successful, press thevoice key and say what you need to search. After you release thevoice key, the host will jump out of another voice content
4. Remote control to remove the pairingAfter pairing the remote control, if you need to remove thepairing information, press BACK, MENU, and LEFT for 9seconds at the same time, Then release the combination key,when the remote is re entered into the broadcast state and can bepaired with other host devicesFCC STATEMENT1. This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions:(1) This device may not cause harmful interference.(2) This device must accept any interference received, includinginterference that may cause undesired operation.2. Changes or modifications not expressly approved by the partyresponsible for compliance could void the user's authority tooperate the equipment.NOTE: This equipment has been tested and found to comply withthe limits for a Class B digital device, pursuant to Part 15 of theFCC Rules. These limits are designed to provide reasonableprotection against harmful interference in a residentialinstallation.This equipment generates uses and can radiate radio frequencyenergy and, if not installed andused in accordance with the instructions, may cause harmfulinterference to radio communications. However, there is noguarantee that interference will not occur in a particularinstallation. If this equipment does cause harmful interference toradio or television reception, which can be determined by turningthe equipment off and on, the user is encouraged to try to correctthe interference by one or more of the following measures:
Reorient or relocate the receiving antenna.Increase the separation between the equipment and receiver.Connect the equipment into an outlet on a circuit differentfrom that to which the receiver is connected.Consult the dealer or an experienced radio/TV technician forhelp.RF warning statement:The device has been evaluated to meet general RF exposurerequirement. The device can be used in portable exposurecondition without restriction.

Navigation menu