Jing Mold Electronic Technology JME1125U Wireless Mouse User Manual JME 1125U

Jing Mold Electronic Technology (Shen Zhen) Co., Ltd. Wireless Mouse JME 1125U

User Manual

                            User Manual  2.4GHz Wireless Optical Mouse JME-1125U
JME-1125U User Manual  1Thanks  for purchasing  this wireless  optical mouse. This creative and easy-to-use wireless mouse will bring you  a  whole  new  wireless  life  experience.  Be  sure  to carefully read this User Manual first for the proper use of  the  wireless  mouse  and  then  keep  it  for  future reference.
JME-1125U User Manual  2  System Requiements                                     Microsoft Windows XP/Vista/Seven or later version   An available USB port    Installation & Use                                         Plug the USB receiver into any available USB port or hub connected to your computer.  The  operating  system  identifies  the  receiver  as  a “USB  Human  Interface  Device”  and  begins installation  automatically.  When  completed,  the system  will  prompt  that  “Your  new  hardware  is installed and ready to use.”
JME-1125U User Manual  3  Remove  the  mouse  battery  compartment  cover, and install batteries with the positive(+) & negative(-) in the correct direction indicated by the AAA battery compartment label.   Replace the battery compartment cover.   Switch on the mouse, the mouse should be func-tioning  now.  If  not,  please  reestablish  contact  for the mouse, hold down the left and right key of the mouse  for 5 seconds, when the receiver light, the mouse is connected.
JME-1125U User Manual  4  Battery Low Indication                             When  the  batteries  voltage  become  low,  the  battery indicating  LED  on the top of the mouse  will blink. The mouse can continue to operate for a period of time on usage, but batteries should be replaced immediately.
JME-1125U User Manual  5  Troubleshooting                                           If the mouse does not work properly, please try the steps:  1. Before you install your wireless mouse, please make sure  the  receiver  installation  is  completed  and  the receiver has start-up. 2. Please check to make sure the batteries are no dead. 3. Make sure the batteries are positioned correctly and connected well. 4. Check if the switch has been switched on. 5.  Make  sure  that  the  mouse  is  within  the  effective range --10m 6.  Press  the  connect  button  on  the  backside  of  the mouse  for  5  seconds.  While  the  receiver  blinks, release the connect button.  FCC Statement                       This  device  complies  with  Part  15  of  the  FCC  Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference and (2) This device must accept any interference received, including  interference  that  may  cause  undesired operation.
JME-1125U User Manual  6   FCC Radiation Exposure Statement      This  equipment  has  been  tested  and  found  to  comply with the limits for a Class B  digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide  reasonable  protection  against  harmful interference in a residential installation. This equipment generates,  uses  and  can  radiate  radio  frequency energy and, if not installed and used in accordance with the  instructions,  may  cause  harmful  interference  to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference   to  radio  or  television  reception,  which  can  be determined  by  turning  the  equipment  off  and  on,  the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna - Increase the separation between the equipment and receiver. -  Connect  the  equipment  into  an  outlet  on  a  circuit different  from  that  to  which  the  receiver  is connected. -  Consult  the  dealer  or  an  experienced  radio/TV technician for help.
JME-1125U User Manual  7 NOTE:   THE  MANUFACTURER  IS  NOT  RESPONSIBLE  FOR ANY  RADIO  OR  TV  INTERFERENCE  CAUSED  BY UNAUTHORIZED  MODIFICATIONS  TO  THIS EQUIPMENT.  SUCH  MODIFICATIONS  COULD  VOID THE  USER  AUTHORITY  TO  OPERATE  THE EQUIPMENT.   Caution: * Risk of explosion if battery is replaced by an incorrect type. * Dispose of used batteries according to the instructions. * Changes or modifications not expressly approved by   the  party  responsible  for  compliance  could  void  the user's authority to operate the equipment.
JME-1125U User Manual  8 Thanks  for  using  the  wireless  mouse.  If  have  any questions  and  suggestions  with  our  product,  please telephone  or  Email  to  our  service  personals,  we  will reply as soon as possible.

Navigation menu