Jing Mold Electronic Technology JME1125U Wireless Mouse User Manual JME 1125U

Jing Mold Electronic Technology (Shen Zhen) Co., Ltd. Wireless Mouse JME 1125U

User Manual

Download: Jing Mold Electronic Technology JME1125U Wireless Mouse User Manual JME 1125U
Mirror Download [FCC.gov]Jing Mold Electronic Technology JME1125U Wireless Mouse User Manual JME 1125U
Document ID1273809
Application IDUepF8ERslsfJtukk96Fllw==
Document DescriptionUser Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize7.26kB (90733 bits)
Date Submitted2010-04-28 00:00:00
Date Available2010-04-28 00:00:00
Creation Date2010-04-19 16:12:10
Producing SoftwareGPL Ghostscript 8.15
Document Lastmod2010-04-19 16:12:10
Document TitleMicrosoft Word - JME-1125U user Manual.doc
Document CreatorPScript5.dll Version 5.2
Document Author: lokher

JME-1125U
User Manual
2.4GHz Wireless Optical Mouse
JME-1125U User Manual
Thanks for purchasing this wireless optical mouse.
This creative and easy-to-use wireless mouse will bring
you a whole new wireless life experience. Be sure to
carefully read this User Manual first for the proper use
of the wireless mouse and then keep it for future
reference.
JME-1125U User Manual
System Requiements
Microsoft Windows XP/Vista/Seven or later version
An available USB port
Installation & Use
Plug the USB receiver into any available USB port
or hub connected to your computer.
The operating system identifies the receiver as a
“USB
Human
Interface
Device”
and
begins
installation automatically. When completed, the
system will prompt that “Your new hardware is
installed and ready to use.”
JME-1125U User Manual
Remove the mouse battery compartment cover,
and install batteries with the positive(+) & negative(-)
in the correct direction indicated by the AAA battery
compartment label.
Replace the battery compartment cover.
Switch on the mouse, the mouse should be functioning now. If not, please reestablish contact for
the mouse, hold down the left and right key of the
mouse for 5 seconds, when the receiver light, the
mouse is connected.
JME-1125U User Manual
Battery Low Indication
When the batteries voltage become low, the battery
indicating LED on the top of the mouse will blink. The
mouse can continue to operate for a period of time on
usage, but batteries should be replaced immediately.
JME-1125U User Manual
Troubleshooting
If the mouse does not work properly, please try the steps:
1. Before you install your wireless mouse, please make
sure the receiver installation is completed and the
receiver has start-up.
2. Please check to make sure the batteries are no dead.
3. Make sure the batteries are positioned correctly and
connected well.
4. Check if the switch has been switched on.
5. Make sure that the mouse is within the effective
range --10m
6. Press the connect button on the backside of the
mouse for 5 seconds. While the receiver blinks,
release the connect button.
FCC Statement
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1)This device may not cause harmful interference and
(2) This device must accept any interference received,
including interference that may cause undesired
operation.
JME-1125U User Manual
FCC Radiation Exposure Statement
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful
interference in a residential installation. This equipment
generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to
radio communications. However, there is no guarantee
that interference will not occur in a particular installation.
If this equipment does cause harmful interference
to radio or television reception, which can be
determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by
one or more of the following measures:
- Reorient or relocate the receiving antenna
- Increase the separation between the equipment and
receiver.
- Connect the equipment into an outlet on a circuit
different from that to which the receiver is
connected.
- Consult the dealer or an experienced radio/TV
technician for help.
JME-1125U User Manual
NOTE:
THE MANUFACTURER IS NOT RESPONSIBLE FOR
ANY RADIO OR TV INTERFERENCE CAUSED BY
UNAUTHORIZED
MODIFICATIONS
TO
THIS
EQUIPMENT. SUCH MODIFICATIONS COULD VOID
THE USER AUTHORITY TO OPERATE THE
EQUIPMENT.
Caution:
* Risk of explosion if battery is replaced by an incorrect
type.
* Dispose of used batteries according to the instructions.
* Changes or modifications not expressly approved by
the party responsible for compliance could void the
user's authority to operate the equipment.
JME-1125U User Manual
Thanks for using the wireless mouse. If have any
questions and suggestions with our product, please
telephone or Email to our service personals, we will
reply as soon as possible.

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Page Count                      : 9
Producer                        : GPL Ghostscript 8.15
Create Date                     : 2010:04:19 16:12:10
Modify Date                     : 2010:04:19 16:12:10
Title                           : Microsoft Word - JME-1125U user Manual.doc
Creator                         : PScript5.dll Version 5.2
Author                          : lokher
EXIF Metadata provided by EXIF.tools
FCC ID Filing: FPWJME1125U

Navigation menu