Jing Mold Electronic Technology JME8265R Wireless Keyboard User Manual JME 8265R Manual
Jing Mold Electronic Technology (Shen Zhen) Co., Ltd. Wireless Keyboard JME 8265R Manual
User Manual
JME-8265R User’s Guide 2.4GHz Wireless Keyboard 1 R & TTE Compliance Statement This equipment complies with all the requirements of the DIRECTIVE 1999/5/EC OF THE EUROPEAN PARLIAMENT AND THE COUNCIL OF 9 March 1999 on radio equipment and telecommunication terminal equipment and the mutual recognition of their conformity (R & TTE). Federal Communications Commission Radio(FCC) Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions : (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution: *Risk of explosion if battery is replaced by an incorrect type. *Dispose of used batteries according to the instructions. *Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment 2 Feature Transmission mode:RF Frequency:2410~2473MHz RFchannel quantity:64 Center of Channel: 2410/2411…/2472/2473MHz Bandwidth of Channel: 1MHz Data Send timing: <500us Power:2 × AAA batteries Modulate mode:GFSK Effective distance:12m Quantity of connection ID:24Bits (8,388,608 ID can be used) Number of keys:99 keys Low battery indicating voltage:2.2V@5% System Requirements Microsoft Windows 98/ME/2000/XP/Vista or later version An available USB port 3 Installation & Use Plug the USB receiver into a computer’s USB port: □ Windows 98 SE/ME The system finds new device and prompts you to insert the operating system CD-ROM. Follow the instructions on the screen to install the required drivers. □ Windows 2000/XP/Vista The operating system identifies the receiver as a “USB Human Interface Device” and begins installation automatically. When completed, the system will prompt that “This device is ready to use!” Open the battery cover in the back 4 Put the batteries into the batteries casket according to the polarity markings inside the battery casket, lock the cover. For the first time of usage, you need to bind the keyboard to the receiver as below: With the keyboard close to the receiver within 50cm, press the binding button on bottom of the keyboard for about seconds, when the receiver’s led blinks 4 times, the keyboard is ready to be use. 5 In normal use, the led on the receiver blinks according to the wireless keyboard’s operation, if the keyboard and mouse are not in operation, the led is off. Keyboard LED function Num Lock Cap Lock Power----This LED is on when the keyboard is active. When the keyboard enter sleep mode or it lost connection to the receiver, the LED will be off. Low Battery----This LED will be lit if the battery power is low, you should replace the battery right now. Fn--Function Key Characters in blue are accessed through the Fn key which works like a shift key, to activate these 6 function, please hold-down “Fn” key before press these keys.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Page Count : 7 Producer : AFPL Ghostscript 8.54 Create Date : 2008:10:30 08:17:22+08:00 Modify Date : 2008:10:30 08:17:22 Title : JME-8265R Manual Creator : PDFCreator Version 0.9.3 Author : windows Subject :EXIF Metadata provided by EXIF.tools