Jizhida Technology 388A Walkie Talkie (FRS) User Manual
Shenzhen Jizhida Technology Co., Ltd Walkie Talkie (FRS)
User Manual
Product USER'S MANUAL Channel/Menu Indicator Battery Level meter Tx/RX Icon CTCSS /DCS Scan Indicator Volume Vox indcator Key Lock Indicator Antenna Headset Jack (Headset not Included) LCD 1. Transmit call tone 2. Lock and unlock the keypad(when held down and not in a menu) 1. Power button Open or close Open walkie-talkie 2. Menu button Select menu options 1. PTT Button (Push to talk) 2. .Save a setting 1. Monitor Function 2. Scanning Function 1. Monitor Function 2. Scanning Function Speaker SIDE Start Guide Installation the battery 1. Make sure your radio is turned OFF. 2. Remove the battery compartment door. 3. Install the 4 NiMH rechargeable battery or 4 AAA Alkaline batteries into the battery compartment. 4.Replace the battery compartment door. Basic radio operations 1. Press 2. Press with 3. Press to turn on. to enter the channel settings, the channel display pattern starts flashing, to select. Press PTT to confirm and exit. twice to enter the setting. OFF for no code, 01~38 for CTCSS code, 39-99 for DCS code. 4. Press for 3 times to enter the Vox function selection. there are OFF, 1,2.3 these 3 gear sensitivity optional. 5. Press for 4 times to enter the CALL tone selection function. They are 01 to 10 sounds available. 6. Press for 5 times to enter the key tone selection function, select the button when the ON button will beep a tone, select the OFF button when there is no tone. 7. Press for 6 times to enter the launch end of the tone selection function, with to select. select ON to release the PTT will have a tone, the opposite choice of OFF there is no tone. 8. Press for 7 times and exit can also press PTT to confirm the exit menu. Note: It doesn’t has charging function , it can’t be charged directly through charger base and so on , it only can be charged by a NiMH vrechargeable battery. When installing the battery, please pay attention to the corresponding positive and negative placement! To set a call tone: Special Features Your radio can transmit different call tones to other radios in your group so you can alert them that you want to talk. Your radio has 10 call tones from which choose. Interference Eliminator Code Interference Eliminator Codes help minimize interference by providing you with a 2. Press until the code starts to flash. to change and hear the call tone. icon appears.The current call tone setting will flash. Voice Operated Transmission (Vox) to select the code 0-99 0R 99-0. Transmisson is initiated by speaking into the microphone of the radio instead of the 3. Press PTT to save the code setting. pushing the PTT button. You can set a different code for each channel using this procedure. Note: You must set the Interference Eliminator Codes to 0 on an FRS radio that uses Interference Eliminator Codes to communicate with other FRS radios that do not have Interference Eliminator Codes. Note: Note Level “N”(OFF)disables VOX Levels 1-3 set thesensitivity of the VOX circuit Use level 1 in quiet environments, and use level 3 in very noisy environments. You can find the appropriate sensitivity level by speaking into the microphone. TOT (TIME OUT Timer ) In order to prevent the use of the channel and save power, walkie-talkie has emission limit function, then the launch time is less than 180 seconds. To turn the channel scan ON: for 3 seconds or until displays and there is a "beep" tone. You can turn the radio on and off, you can't adjust the volume, menu, and monitor channels. All other functions are locked. for 3 seconds or until is no longer displayed. And 1.press to enter Scan mode. 2.press or PTT to turn off Scan mode. Note: there is a “beep" tone. Note: When locking , only the PTT and Eatures your radio to scan for active channels .when activity is detected, your radio radio continues scannig to other channels. Locking the Keypad To avoid accidentally changing your radio settings, press Scanning Channels lands (stays) on that channel for 5 seconds. To transmit on that channel ends, your When reached the default time , the radio stops launching with "beep" tone. To unlock the radio, press button until 2.Press 3.Press PTT to save . choice of code combinations. To set the code for a channel: 1. Press 1.Press During scanning , press the Safety and General Information are valid. key to change the direction of the scan. 1.If you carry any kind of personal medical device, consult a doctor before use. Setting and Transmitting Call Tones 2.To avoid the risk of burns, do not use the device if the aerial is damaged in any way. Your radio can transmit different call tones to other radios in your group so you can 3.Never use the device in close proximity to a radio to avoid interference. alert them that you want to talk. 4.Position the transmitter and antenna at least 25 mm from your mouth. 5.The device cannot be used to contact the emergency services. WARNING Device Type: Exposure Category: Antenna Type(s): Body-Worn Accessories: Face-Head Accessories: Modulation Type: Frequency Band: Target ERP Power: Power Source: Dimensions (L*W*H): Normal Operation: Portable SAFETY INFORMATION Your wireless hand-held portable transceiver contains a low power transmitter. This product sends out radio frequency (RF) signals when the Push-to-Talk (PTT) button is pressed. The device is authorized to operate at a duty factor not to exceed 50%. In August 1996, the Federal Communications Commissions (FCC) adopted RF exposure guidelines with safety levels for hand-held wireless devices. To control your exposure and ensure compliance with the general population or uncontrolled environment exposure limits, keep the radio at 2.5 cm away from the face, use non-approved accessories may cause the radio to exceed RF exposure limts. General Population/Uncontrolled Exposure External Antenna Belt Clip None FM 462.5625467.7125 MHz 462.55467.7125 MHz 462 MHz band:20 dBm; 467 MHz band: 19 dBm AAA*4 A*4 Alkaline battery DC 6.0V by AA A*4Alkaline Alkalie battery 14.6 cm (L) x 5.8 cm (W) x 3.6 cm (H) Face Up and Body-worn WARNING This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. IMPORTANT NOTE: Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment and should not be made. To comply with FCC requirements, transmitter adjustments should be made only by or under the supervision of a person certified as technically qualified to perform transmitter maintenance and repairs in the private land mobile and fixed services as certified by an organization representative of the user of those services. Replacement of any transmitter component (crystal, semiconductor, etc) not authorized by the FCC equipment authorization for this radio could violate FCC rules. Note: Use of this radio outside the country where it was intended to be distributed is subject to government regulations and may be prohibited. uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Create Date : 2018:05:21 16:04:50+08:00 Creator : Adobe Illustrator CS6 (Windows) Modify Date : 2018:07:26 11:09:59-07:00 Has XFA : No XMP Toolkit : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26 Format : application/pdf Title : 粉色对讲机_说明书A4 第四版 Metadata Date : 2018:07:26 11:09:59-07:00 Creator Tool : Adobe Illustrator CS6 (Windows) Thumbnail Width : 256 Thumbnail Height : 160 Thumbnail Format : JPEG Thumbnail Image : (Binary data 13962 bytes, use -b option to extract) Instance ID : uuid:9828edd7-e78e-4444-a660-85163de868bf Document ID : xmp.did:74045B0CCD5CE811A7B5FB314D2D6B9E Original Document ID : uuid:5D20892493BFDB11914A8590D31508C8 Rendition Class : proof:pdf Derived From Instance ID : uuid:98b72614-ae1c-46d2-b578-3125226f4887 Derived From Document ID : xmp.did:72045B0CCD5CE811A7B5FB314D2D6B9E Derived From Original Document ID: uuid:5D20892493BFDB11914A8590D31508C8 Derived From Rendition Class : proof:pdf History Action : saved, saved History Instance ID : xmp.iid:BF6F143A6753E81191159D8EA67C938B, xmp.iid:74045B0CCD5CE811A7B5FB314D2D6B9E History When : 2018:05:09 16:59:05+08:00, 2018:05:21 16:04:51+08:00 History Software Agent : Adobe Illustrator CS6 (Windows), Adobe Illustrator CS6 (Windows) History Changed : /, / Startup Profile : Print Has Visible Overprint : False Has Visible Transparency : True N Pages : 1 Max Page Size W : 210.001661 Max Page Size H : 284.999994 Max Page Size Unit : Millimeters Font Name : ArialNarrow-Bold, Arial-Black, ArialRoundedMTBold, Arial-BoldMT, ArialMT, Verdana, DengXian-Bold, AdobeSongStd-Light Font Family : Arial, Arial, Arial Rounded MT Bold, Arial, Arial, Verdana, 等线, Adobe 宋体 Std Font Face : Narrow Bold, Black, Regular, Bold, Regular, Regular, Bold, L Font Type : Open Type, Open Type, Open Type, Open Type, Open Type, Open Type, Open Type, Open Type Font Version : Version 2.40, Version 5.22, Version 1.51, Version 6.90, Version 6.90, Version 5.32, Version 1.15, Version 5.017;PS 5.002;hotconv 1.0.67;makeotf.lib2.5.33168 Font Composite : False, False, False, False, False, False, False, False Font File Name : ARIALNB.TTF, ariblk.ttf, ARLRDBD.TTF, arialbd.ttf, arial.ttf, verdana.ttf, Dengb.ttf, AdobeSongStd-Light.otf Plate Names : Cyan, Magenta, Yellow, Black Swatch Group Name : 默认色板组, 灰色, 明亮 Swatch Group Type : 0, 1, 1 Swatch Colorant Swatch Name : 白色, 黑色, CMYK 红, CMYK 黄, CMYK 绿, CMYK 青, CMYK 蓝, CMYK 洋红, C=15 M=100 Y=90 K=10, C=0 M=90 Y=85 K=0, C=0 M=80 Y=95 K=0, C=0 M=50 Y=100 K=0, C=0 M=35 Y=85 K=0, C=5 M=0 Y=90 K=0, C=20 M=0 Y=100 K=0, C=50 M=0 Y=100 K=0, C=75 M=0 Y=100 K=0, C=85 M=10 Y=100 K=10, C=90 M=30 Y=95 K=30, C=75 M=0 Y=75 K=0, C=80 M=10 Y=45 K=0, C=70 M=15 Y=0 K=0, C=85 M=50 Y=0 K=0, C=100 M=95 Y=5 K=0, C=100 M=100 Y=25 K=25, C=75 M=100 Y=0 K=0, C=50 M=100 Y=0 K=0, C=35 M=100 Y=35 K=10, C=10 M=100 Y=50 K=0, C=0 M=95 Y=20 K=0, C=25 M=25 Y=40 K=0, C=40 M=45 Y=50 K=5, C=50 M=50 Y=60 K=25, C=55 M=60 Y=65 K=40, C=25 M=40 Y=65 K=0, C=30 M=50 Y=75 K=10, C=35 M=60 Y=80 K=25, C=40 M=65 Y=90 K=35, C=40 M=70 Y=100 K=50, C=50 M=70 Y=80 K=70, PANTONE 185 C, C=0 M=0 Y=0 K=100, C=0 M=0 Y=0 K=90, C=0 M=0 Y=0 K=80, C=0 M=0 Y=0 K=70, C=0 M=0 Y=0 K=60, C=0 M=0 Y=0 K=50, C=0 M=0 Y=0 K=40, C=0 M=0 Y=0 K=30, C=0 M=0 Y=0 K=20, C=0 M=0 Y=0 K=10, C=0 M=0 Y=0 K=5, C=0 M=100 Y=100 K=0, C=0 M=75 Y=100 K=0, C=0 M=10 Y=95 K=0, C=85 M=10 Y=100 K=0, C=100 M=90 Y=0 K=0, C=60 M=90 Y=0 K=0 Swatch Colorant Mode : CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, Lab, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK Swatch Colorant Type : PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, SPOT, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS Swatch Colorant Cyan : 0.000000, 0.000000, 0.000000, 0.000000, 100.000000, 100.000000, 100.000000, 0.000000, 15.000000, 0.000000, 0.000000, 0.000000, 0.000000, 5.000000, 20.000000, 50.000000, 75.000000, 85.000000, 90.000000, 75.000000, 80.000000, 70.000000, 85.000000, 100.000000, 100.000000, 75.000000, 50.000000, 35.000000, 10.000000, 0.000000, 25.000000, 40.000000, 50.000000, 55.000000, 25.000000, 30.000000, 35.000000, 40.000000, 40.000000, 50.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 85.000000, 100.000000, 60.000000 Swatch Colorant Magenta : 0.000000, 0.000000, 100.000000, 0.000000, 0.000000, 0.000000, 100.000000, 100.000000, 100.000000, 90.000000, 80.000000, 50.000000, 35.000000, 0.000000, 0.000000, 0.000000, 0.000000, 10.000000, 30.000000, 0.000000, 10.000000, 15.000000, 50.000000, 95.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 95.000000, 25.000000, 45.000000, 50.000000, 60.000000, 40.000000, 50.000000, 60.000000, 65.000000, 70.000000, 70.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 100.000000, 75.000000, 10.000000, 10.000000, 90.000000, 90.000000 Swatch Colorant Yellow : 0.000000, 0.000000, 100.000000, 100.000000, 100.000000, 0.000000, 0.000000, 0.000000, 90.000000, 85.000000, 95.000000, 100.000000, 85.000000, 90.000000, 100.000000, 100.000000, 100.000000, 100.000000, 95.000000, 75.000000, 45.000000, 0.000000, 0.000000, 5.000000, 25.000000, 0.000000, 0.000000, 35.000000, 50.000000, 20.000000, 40.000000, 50.000000, 60.000000, 65.000000, 65.000000, 75.000000, 80.000000, 90.000000, 100.000000, 80.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 100.000000, 100.000000, 95.000000, 100.000000, 0.000000, 0.003100 Swatch Colorant Black : 0.000000, 100.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 10.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 10.000000, 30.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 25.000000, 0.000000, 0.000000, 10.000000, 0.000000, 0.000000, 0.000000, 5.000000, 25.000000, 40.000000, 0.000000, 10.000000, 25.000000, 35.000000, 50.000000, 70.000000, 100.000000, 89.999400, 79.998800, 69.999700, 59.999100, 50.000000, 39.999400, 29.998800, 19.999700, 9.999100, 4.998800, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.003100 Swatch Colorant Tint : 100.000000 Swatch Colorant L : 49.803902 Swatch Colorant A : 77 Swatch Colorant B : 49 Producer : Adobe PDF library 10.01 Page Count : 2 For : Ǵ, Bounding Box : -7 -812 1258 -37 Container Version : 11 Creator Version : 22EXIF Metadata provided by EXIF.tools