Jogtek TM-001 HF RFID MODULE User Manual

Jogtek Corp. HF RFID MODULE

USERS MANUAL

TM-001 User’s Manual Precautions of use Before using the reader/writer and card, read the following precautions. Be sure to adhere to the precautions to avoid malfunctions and failures caused by misuse. Note that we shall bear no responsibilities for collateral damages to the stored data caused by faults, malfunctions or failures of the reader/writer. Changes or modifications not expressly approved by the manufacturer for compliance could void the user’s authority to operate the equipment. 1. Avoid using the reader/writer in the presence of strong electromagnetic waves The reader/writer supplies power to the card or tag via an electromagnetic wave to communicate with the card or tag. Presence of strong electromagnetic waves (especially waves with frequencies around 13.56 MHz) in the proximity of the reader/writer or card or tag will affect communication between the reader/writer and card or tag, causing reduced access area or inability to access the card. Be sure to test the reader/writer using the actual power source in the installation location environment before use. 2. Keep precision devices that may be affected by electromagnetic waves away from the reader/writer Since the reader/writer constantly emits an electromagnetic wave (of around 13.56 MHz), placing precision devices that may be affected by electromagnetic waves near the reader/writer can cause malfunction or failure of the devices. When operating the reader/writer, keep precision devices away from the reader/writer. If such precision devices must be located near the reader/writer, shield the precision devices with a metal cover and be sure to test the devices to check for any influence.
3. Avoid using multiple readers in proximity to each other The reader supplies power to the card or tag via an electromagnetic wave to communicate with the card or tag and thus constantly emits an electromagnetic wave (of around 13.56 MHz). Using multiple readers in proximity to each other will cause interference, interrupt communication between the card and reader, and prevent access to the card. Others - Use the reader/writer as a general-purpose communication tool (for terminals) such as OA devices. - Use the reader/writer in a place unaffected by organic solvents, oils or water. - Use the reader/writer in a place free of corrosive gases, toxic gases, or flammable gases.

Navigation menu