USERS MANUAL
TM-001 User’s Manual
Precautions of use
Before using the reader/writer and card, read the following precautions. Be
sure to adhere to the precautions to avoid malfunctions and failures caused
by misuse. Note that we shall bear no responsibilities for collateral damages
to the stored data caused by faults, malfunctions or failures of the
reader/writer.
Changes or modifications not expressly approved by the manufacturer for
compliance could void the user’s authority to operate the equipment.
1. Avoid using the reader/writer in the presence of strong
electromagnetic waves
The reader/writer supplies power to the card or tag via an electromagnetic
wave to communicate with the card or tag. Presence of strong
electromagnetic waves (especially waves with frequencies around 13.56
MHz) in the proximity of the reader/writer or card or tag will affect
communication between the reader/writer and card or tag, causing reduced
access area or inability to access the card. Be sure to test the reader/writer
using the actual power source in the installation location environment before
use.
2. Keep precision devices that may be affected by
electromagnetic waves away from the reader/writer
Since the reader/writer constantly emits an electromagnetic wave (of around
13.56 MHz), placing precision devices that may be affected by
electromagnetic waves near the reader/writer can cause malfunction or
failure of the devices. When operating the reader/writer, keep precision
devices away from the reader/writer. If such precision devices must be
located near the reader/writer, shield the precision devices with a metal
cover and be sure to test the devices to check for any influence.
3. Avoid using multiple readers in proximity to each other
The reader supplies power to the card or tag via an electromagnetic wave to
communicate with the card or tag and thus constantly emits an
electromagnetic wave (of around 13.56 MHz). Using multiple readers in
proximity to each other will cause interference, interrupt communication
between the card and reader, and prevent access to the card.
Others
- Use the reader/writer as a general-purpose communication tool (for
terminals) such as OA devices.
- Use the reader/writer in a place unaffected by organic solvents, oils or
water.
- Use the reader/writer in a place free of corrosive gases, toxic gases, or
flammable gases.
