Johnson Controls Interiors HMIHL4 HomeLink Universal Garage Door Opener User Manual

Download:
Mirror Download [FCC.gov]
Document ID	1402095
Application ID	K4HBw+ENQHu62wTX0pvJPw==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	5.61kB (70122 bits)
Date Submitted	2011-01-10 00:00:00
Date Available	2011-01-10 00:00:00
Creation Date	2010-10-27 10:22:35
Producing Software	Acrobat Distiller 8.0.0 (Windows)
Document Lastmod	2010-10-27 10:22:35
Document Title	Microsoft Word - Daimler NEW HMI User Manual_25.10.2010_DE and ENG.docx
Document Creator	PScript5.dll Version 5.2.2
Document Author:	athomse

Daimler NEW HMI Homelink
Diamler HMLK HMI 2067207 FCC ID: CB2HMIHL4 Canadian ID:279B‐HMIHL4 Model:HMIHL4
Clear all channels:
1.
2.
Press button 1 and 3 at the same time for > 10 seconds. (LED is “yellow“)
LED switches to const. “green“, if all channels are cleared.
Train an original transmitter (OT):
1.
2.
3.
4.
5.
6.
All channels are cleared
Press the HomeLink button, which should be programmed, for ca. 1 second and release the button.
(LED blinks “yellow“)
Press the appropriate button of the original transmitter (OT)
LED switches const. to “green“, if a Fix‐Code System is successfully trained.
LED switches const to “yellow“, if a Rolling‐Code System is successfully trained. The “yellow” LED
indicates that the HomeLink must be synchronized with the OT receiver. If you press the button again
the LED blinks fast “green”
Failure during programming = LED switches to “red“
When a Homelink © IV button is pressed
1.
2.
3.
A Voltage Controlled Oscillator (VCO) is set to desired RF carrier frequency (recalled from the NVM).
The antenna is fine tuned by sweeping around the stored tuning point with a series of fine pulses of
approximately 300 uS in duration with 9.6 mS off.
The VCO signal is then modulated with the appropriate garage door opener bit code from the NVM.
FCC Compliance and Warning
This device complies with Part 15 of the FCC rules and with RSS‐210 of the Industry Canada. Operation is
subject to the following two conditions:
(1) This device may not cause harmful interference,
(2) This device must accept any interference that may be received including interference that may cause
undesired operation.
WARNING: The transmitter has been tested and complies with FCC and Industry Canada rules. Changes or
modifications not expressly approved by the party responsible for the compliance could void the user’s
authority to operate the device.”

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Creator Tool                    : PScript5.dll Version 5.2.2
Modify Date                     : 2010:10:27 10:22:35-04:00
Create Date                     : 2010:10:27 10:22:35-04:00
Format                          : application/pdf
Title                           : Microsoft Word - Daimler NEW HMI User Manual_25.10.2010_DE and ENG.docx
Creator                         : athomse
Producer                        : Acrobat Distiller 8.0.0 (Windows)
Document ID                     : uuid:15091e2f-6f62-4de8-a1bd-d3e66dddef96
Instance ID                     : uuid:ae3d6c08-a0d4-412a-aaae-89626fb10475
Page Count                      : 1
Author                          : athomse

EXIF Metadata provided by EXIF.tools