Johnson Controls Interiors MDGMY10 Mitsubishi BlueTooth HandsFree Module User Manual Assembly Instructions rev1

Download:
Mirror Download [FCC.gov]
Document ID	1173002
Application ID	Eg+vCkqu1nVfv+z/EOHdcQ==
Document Description	Installation Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	12.67kB (158331 bits)
Date Submitted	2009-09-22 00:00:00
Date Available	2009-09-30 00:00:00
Creation Date	2009-08-24 09:47:00
Producing Software	Acrobat Distiller 9.0.0 (Windows)
Document Lastmod	2009-08-24 09:47:00
Document Title	Microsoft Word - Assembly Instructions rev1.doc
Document Creator	PScript5.dll Version 5.2.2
Document Author:	pc-8741

Installation Manual
The module is installed while the car is being built.
Module is screwed into top of plastic bin cover with 2 Torx Head screws. Harness is plugged into
Module.
Radio harness is plugged into back of Radio. Radio is mounted into Instrument Panel with 4 screws.
Radio Face Plate harness is connected to Radio Face Plate. Radio Faceplate is snapped into place.
Vents are snapped into place.
Radiofrequency radiation exposure Information:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance of 20 cm between the radiator
and your body.
This transmitter must not be co‐located or operating in conjunction with any other antenna or
transmitter.
NOTICE:
This device complies with Part 15 of the FCC Rules and with RSS‐210 of Industry Canada.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation.
NOTICE:
Changes or modifications made to this equipment not expressly approved by (manufacturer name) may
void the FCC authorization to operate this equipment.
NOTICE:
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:




Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV technician for help.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Author                          : pc-8741
Create Date                     : 2009:08:24 09:47:00+02:00
Modify Date                     : 2009:08:24 09:47:00+02:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Producer                        : Acrobat Distiller 9.0.0 (Windows)
Creator Tool                    : PScript5.dll Version 5.2.2
Format                          : application/pdf
Title                           : Microsoft Word - Assembly Instructions rev1.doc
Creator                         : pc-8741
Document ID                     : uuid:3ada044c-ab1b-4757-9894-158202299a31
Instance ID                     : uuid:7d111ca5-6788-40c7-90ab-a880718152e9
Page Count                      : 3

EXIF Metadata provided by EXIF.tools