Jonter Digital M50 Bluetooth Speaker User Manual USERS MANUAL

Shenzhen Jonter Digital Co., Ltd Bluetooth Speaker USERS MANUAL

USERS MANUAL

Download: Jonter Digital M50 Bluetooth Speaker User Manual USERS MANUAL
Mirror Download [FCC.gov]Jonter Digital M50 Bluetooth Speaker User Manual USERS MANUAL
Document ID2254748
Application IDah0wJR1sCBSSZSOpUx47Xg==
Document DescriptionUSERS MANUAL
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize10.57kB (132171 bits)
Date Submitted2014-04-29 00:00:00
Date Available2014-04-29 00:00:00
Creation Date2014-04-21 17:58:15
Producing SoftwareMicrosoft® Office Word 2007
Document Lastmod2014-04-21 17:59:13
Document TitleUSERS MANUAL
Document CreatorMicrosoft® Office Word 2007
Document Author: 微软用户

Bluetooth Speaker User Manual
Features
●
●
●
●
●
●
Supports LED status indicator lights , simple and elegant .
Bluetooth speakerphone , clear and fast.
Support AUX-IN function.
increase the use of low-frequency systems , making the low-frequency thick and powerful.
With IPX advanced waterproof.
The built-in battery + DC5V power supply , convenient and practical.
Power on / off function
Side of the machine "power switch" to the ON position, you can boot, shutdown can dial to the
OFF position.
Bluetooth modes of operation:
1, the boot, the machine will be a beep, and then enters a wait state pairing , with blue lights
flashing .
2 , open the phone or computer and other Bluetooth-enabled devices , Bluetooth click search , you
can find the Bluetooth name you want, you can connect directly to the point matching , and then
open the player can play music.
3 , press
button, you can select the next track .
4 , press the
key , you can select the previous track .
+" key, you can increase the volume.
6 , long press "- " key , you can reduce the volume.
5 , Long press: "
7 , short press "
" key , you can pause , and then click , you can play .
Speakerphone
When the phone call, short press "
" button, you can answer a call , press the hang up the
phone.
Charging function
When the machine appears on intermittent "beep" alarm , indicating the machine low and needs
recharging , the large female end of the adapter or with the USB cable to the 5V output power , the
other end of the Micro USB_5P head corresponding machine USB Block Access on , you can
charge .
Electricity
The machine uses battery power monitoring.
With the increased use of time, the battery will be reduced.
When the battery is about to run out, the machine will be intermittent "beep" low tone,
this time should be promptly charged.
Charging function
When you need to recharge, you must add USB5V power to charge the machine.
A short time without the use of the machine, try turning off the power.
Do not for a long time machine volume to maximum position.
Federal Communications Commission (FCC) Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generate, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one of the following measures:
 Reorient or relocate the receiving antenna.
 Increase the separation between the equipment and receiver.
 Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
 Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
FCC Caution: Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate this equipment.
RF exposure warning
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment.
The equipment must not be co-located or operating in conjunction with any other antenna or
transmitter.

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Warning                         : Invalid secondary xref table
Page Count                      : 3
Language                        : zh-CN
Tagged PDF                      : Yes
Author                          : 微软用户
Creator                         : Microsoft® Office Word 2007
Create Date                     : 2014:04:21 17:58:15+08:00
Modify Date                     : 2014:04:21 17:59:13+08:00
Producer                        : Microsoft® Office Word 2007
EXIF Metadata provided by EXIF.tools
FCC ID Filing: 2AB9SM50

Navigation menu