Jonter Digital M61F BLUETOOTH SPEAKER User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3912414
Application ID	1TNO7TcTaJK8LTp1+h/bpA==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	14.96kB (186967 bits)
Date Submitted	2018-07-04 00:00:00
Date Available	2018-07-04 00:00:00
Creation Date	2018-06-26 09:15:03
Document Lastmod	2018-06-26 09:15:03
Document Title	User Manual
Document Creator	WPS Office
Document Author:	Administrator

M61F English Manual
Package:
1. Bluetooth Speaker x 1 pc
2. Micro USB cable x 1 pc
3. 3.5mm Audio cable x 1 pc
4. User manual x 1 pc
Function panel:
1.
: Power ON/Power OFF
2.
: Volume Down/ Last Track
3.
: Volume Up/Next Track
4.
: Play/Pause/BT disconnect
5.
: Hands Free/Switch Modes
6.
: DC 5V IN Charging Port
7.
8.
: Aux in
：SD card slot
Bluetooth Mode:
1. Press and hold button
to turn the speaker ON/OFF. Under the Bluetooth mode, the
LED light will be Blue, when the speaker is on, the LED light will keep flashing quickly.
2. Turn on the BT function of your mobile device to find “M61F” , then make speaker and mobile
device connected. When it connected, the Blue LED light will keep lighting.
3. Press and hold button
to disconnect Bluetooth; Press button
to Pause or Play
media. When playing, the Blue LED will flash slowly.
4. Press button
5. Press button
to decrease volume; press and hold it to play the last track.
to
increase volume; press and hold it to play the next track.
6. When there is a coming call, press button
to answer it, then press it again to hang it up.
Press and hold it to reject a coming call.
AUX IN Mode:
1. After turn the speaker on, connect your mobile device with speaker via the audio cable, Under
the AUX in mode, the LED light will be blue and keep bright.
2. Press button
3.
to Pause or Play media
Press button
4. Press button
to decrease volume; press and hold it to play the last track.
to
increase volume; press and hold it to play the next track.
5. When there is a coming call, press button
to answer it, then press it again to hang it
up. Press and hold it to reject a coming call.
6. Press and hold
to switch to Bluetooth mode.
SD card Mode:
1. As long as you insert your SD card into the SD card slot, the speaker will turn into SD card
mode and play automatically, when playing it will flash quickly.
2. Press button
3.
to Pause or Play media
Press button
4. Press button
to decrease volume; press and hold it to play the last track.
to
increase volume; press and hold it to play the next track.
Pls. Note, under SD card mode, mode switching
and hands free function is not available.
Charging:
The speaker is with built in rechargeable battery, before using it, please make it full charged using
the USB cable. During the charging time, the LED light next to the charging port will be red, and it
will turn off when the speaker is full charged. It will make 2-3 hours to make the speaker full
charged.
CAUTION：
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
the battery shall not be exposed to excessive heat such as sunshine, fire or the like
NOTE: This equipment has been tested and found to comply with
the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are
designed to provide reasonable protection against harmful
interference in a
residential installation. This equipment generates uses and can
radiate radio
frequency energy and, if not installed and used in accordance with
the instructions,
may cause harmful interference to radio communications. However,
there is no
guarantee that interference will not occur in a particular installation.
If this
equipment does cause harmful interference to radio or television
reception, which
can be determined by turning the equipment off and on, the user is
encouraged to
try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from
that to which the
receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party
responsible for compliance
could void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may
cause undesired operation.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : No
Page Count                      : 4
Author                          : Administrator
Comments                        : 
Company                         : 
Create Date                     : 2018:06:26 09:15:03+01:15
Creator                         : WPS Office
Modify Date                     : 2018:06:26 09:15:03+01:15
Producer                        : 
Source Modified                 : D:20180626091503+01'15'
Subject                         : 
Title                           : 
Trapped                         : false

EXIF Metadata provided by EXIF.tools