Jonter Digital M63F BLUETOOTH SPEAKER User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3911091
Application ID	iHQlxiCFZwLbg5OneGwQcQ==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	13.38kB (167296 bits)
Date Submitted	2018-07-03 00:00:00
Date Available	2018-07-03 00:00:00
Creation Date	2018-06-25 09:24:30
Document Lastmod	2018-06-25 09:24:30
Document Title	User Manual
Document Creator	WPS Office
Document Author:	灿

M63F English Manual
What’s Included
1. Bluetooth Speaker x 1 pc
2. Micro USB cable x 1 pc
3. 3.5mm Audio cable x 1 pc
4. User manual x 1 pc
Function panel:
1.
: Power ON/Power OFF
2.
: Volume Down/ Last Track
3.
: Volume Up/Next Track
4.
: Play/Pause/Hands Free
5.
:BT disconnect /Switch Modes
6.
: DC 5V IN Charging Port
7.
: Aux in
8.
：5V, 2A USB output
9.
: power indicator
Bluetooth Mode:
1. Press and hold button
to turn the speaker ON/OFF, Speaker will emit tones. And the
LED light will be white and flashing slowly.
2. Turn on the BT function of your mobile device to find “M63F” , then make speaker and mobile
device connected. When it connected, the LED indicator will turn to solid white. Press and hold
button
to disconnect Bluetooth.
3. Press button
to Pause or Play media.
4. Press button
to decrease volume; press and hold it to play the last track.
5. Press button
to
increase volume; press and hold it to play the next track.
6. When there is a coming call, press button
Press and hold it to reject a coming call.
to answer it, then press it again to hang it up.
AUX IN Mode:
1. After turn the speaker on, connect your mobile device with speaker via the audio cable, Under
the AUX in mode, the LED light will be solid red.
2. Press button
3.
Press button
to Pause or Play media
to decrease volume; turn to last track is not available
4.
Press button
to
increase volume; turn to next track is not available
Pls note: Hands free function is not available under aux in mode.
TWS function:
First time pairing Two speakers:
When you have 2pcs M63F and want to
units.
wirelessly pair them for stereo sound, power on the 2
Next, take one of the units to be the passive speaker, press button
other to be the master speaker, double press button
on it ; and take the
it will emit tones to indicate that
two-speaker pairing has been initiated. Wait around 3-5s for the units to pair. When paired, LED
indicator on passive speaker will turn to solid white, while the master speaker keeps flash slowly.
Then pair the master speaker to your phone by selecting M63F from the list of discovered
Bluetooth devices on your smart phone. Once connected, the master speaker will emit tones.
Press button
time.
on one of the speaker to turn it off, the other will be powered of at the same
Auto Re-pairing of the same two speakers:
Power on the two M61F units, waiting around 5s and speaker will automatically re-pair to each
other. The master speaker will emit tones and LED indicator will turn to flash slowly, while
indicator on the other unit will turn solid blue. If you phones is on and within BT range, the
speakers will automatically reconnect to it. The master speaker will emit tones when connected.
To un-repair two paired speakers, double press
on either speaker, the master speaker will
emit tones.
NOTE: This functionality is ONLY available with two speaker with a distance of up to 15ft from
each other. It only works when using Bluetooth as your audio source.
Charging:
The speaker is with built in rechargeable battery, before using it, please make it full charged using
the USB cable. During the charging time, the LED light next to the charging port will be red, and it
will turn off when the speaker is full charged. It will take 3-4 hours to make the speaker fully
charged.
CAUTION：
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
the battery shall not be exposed to excessive heat such as sunshine, fire or the like
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : No
Page Count                      : 5
Author                          : 灿
Comments                        : 
Company                         : 
Create Date                     : 2018:06:25 09:24:30+01:24
Creator                         : WPS Office
Modify Date                     : 2018:06:25 09:24:30+01:24
Producer                        : 
Source Modified                 : D:20180625092430+01'24'
Subject                         : 
Title                           : 
Trapped                         : false

EXIF Metadata provided by EXIF.tools