Jotron AS TR8000 Tron AIS TR-8000 User Manual Operator and Installation Manual part 1
Jotron AS Tron AIS TR-8000 Operator and Installation Manual part 1
Contents
- 1. Technical Manual
- 2. Operator and Installation Manual part 1
- 3. Operator and Installation Manual part1
- 4. Operator and Installation Manual part 2
- 5. Operator and Installation Manual part 3
Operator and Installation Manual part 1
Table of Contents Revision History ........................................................................................ 6 Software revisions..................................................................................... 7 Introduction .............................................................................................. 8 3.1 Safety Instructions................................................................................................. 8 3.2 Compass Safe Distance ......................................................................................... 8 3.3 Copyright Notice.................................................................................................... 8 3.4 Disclaimer Notice .................................................................................................. 8 3.5 Disposal Instructions ............................................................................................. 9 3.6 Software and Hardware revisions ......................................................................... 9 3.7 Ingress protection ................................................................................................. 9 Operation general introduction ............................................................... 10 4.1 Equipment List ........................................................................................ 11 5.1 Standard Supply .................................................................................................. 11 5.2 Optional Supply ................................................................................................... 11 TR-8000 Description ................................................................................ 12 6.1 Functionality ........................................................................................................ 13 6.2 Transponder Unit ................................................................................................ 14 6.2.1 LED Indicators: ............................................................................................................... 15 6.2.2 Main functionality: ......................................................................................................... 15 6.2.3 VHF Antenna Connector ................................................................................................ 15 6.2.4 GPS Antenna Connector................................................................................................. 15 6.2.5 External Display (Ethernet) Connector .......................................................................... 16 6.2.6 Multipurpose Cable Glands............................................................................................ 16 6.3 About AIS in general ............................................................................................ 10 Display Unit ......................................................................................................... 17 Operational description .......................................................................... 18 7.1 On/Off button ..................................................................................................... 18 7.1.1 Clean Screen................................................................................................................... 18 7.1.2 Power off Display ........................................................................................................... 19 7.2 Display Unit menu system. .................................................................................. 20 7.2.1 Status Bar ....................................................................................................................... 20 7.2.2 Content Section.............................................................................................................. 21 7.2.3 Button Bar ...................................................................................................................... 21 7.2.4 Important Buttons shown in different Views: ............................................................... 22 TR-8000 Operator and Installation Manual 7.2.5 Indicating ICONS............................................................................................................. 23 7.2.6 Ship List .......................................................................................................................... 24 7.2.6.1 7.2.7 7.3 Graphical View ............................................................................................................... 26 Voyage Settings ................................................................................................... 28 7.3.1 Navigational Status ........................................................................................................ 29 7.3.2 Destination ..................................................................................................................... 30 7.3.3 ETA ................................................................................................................................. 31 7.3.4 Persons Aboard (optional) ............................................................................................. 31 7.3.5 Cargo Category ............................................................................................................... 31 7.3.6 Draught .......................................................................................................................... 32 7.4 Messages ............................................................................................................. 33 7.4.1 Received messages ........................................................................................................ 33 7.4.2 Popup when received message ..................................................................................... 34 7.4.3 Sent messages ................................................................................................................ 34 7.4.4 Write New message ....................................................................................................... 35 7.5 Column description....................................................................................................... 25 7.4.4.1 Message recipients “From list” ..................................................................................... 36 7.4.4.2 Message recipients “Enter MMSI”................................................................................ 37 7.4.4.3 Message recipients “Broadcast” ................................................................................... 37 Display Settings ................................................................................................... 38 Installation .............................................................................................. 39 8.1 Mechanical Mounting ......................................................................................... 39 8.1.1 Transponder unit............................................................................................................ 39 8.1.2 Display Unit .................................................................................................................... 40 8.1.3 8.2 8.1.2.1 Desktop Mounting ........................................................................................................ 40 8.1.2.2 Roof Mounting .............................................................................................................. 41 8.1.2.3 Flush/ Panel Mounting ................................................................................................. 42 Antennas ........................................................................................................................ 43 8.1.3.1 GPS Antenna ................................................................................................................. 44 8.1.3.2 VHF Antenna ................................................................................................................. 46 Cabling ................................................................................................................. 47 8.2.1 GPS antenna ................................................................................................................... 47 8.2.2 VHF antenna................................................................................................................... 48 8.2.3 Cable between Transponder and Display Unit .............................................................. 48 8.3 8.3.1 Wiring and Connections ...................................................................................... 49 Transponder ................................................................................................................... 50 8.3.1.1 Pictorial display of typical connections to the transponder ......................................... 51 TR-8000 Operator and Installation Manual 8.3.2 8.3.1.2 Label in transponder with connection tables ............................................................... 52 8.3.1.3 Power connection ......................................................................................................... 53 8.3.1.4 Sensor connections ....................................................................................................... 54 8.3.1.5 External display – ECDIS/Radar connections ................................................................ 55 8.3.1.6 Pilot / Aux. Display connection ..................................................................................... 56 8.3.1.7 Alarm Connection ......................................................................................................... 57 8.3.1.8 Detailed description of connections, fuses, factory reset etc. ..................................... 58 Display Unit: ................................................................................................................... 60 Initial configuration ................................................................................. 63 9.1 Short reference for initial configuration ............................................................. 63 9.2 Not all ships carry AIS .......................................................................................... 63 9.3 Use of AIS in collision avoidance ......................................................................... 63 9.4 Erroneous information ........................................................................................ 64 10 Operation Instructions ............................................................................ 65 10.1 Configuration Menu ............................................................................................ 65 10.1.1 Own Ship ........................................................................................................................ 65 10.1.1.1 Type of Vessel ............................................................................................................. 66 10.1.1.2 Ship Dimension and Antenna Position ....................................................................... 67 10.1.2 Display Settings .............................................................................................................. 68 10.1.2.1 Sleeping Targets.......................................................................................................... 68 10.1.2.2 Views .......................................................................................................................... 68 10.1.3 Regional Settings ............................................................................................................ 69 10.1.3.1 Current Region settings .............................................................................................. 69 10.1.3.2 View Regions .............................................................................................................. 70 10.1.3.3 Add Region.................................................................................................................. 71 10.1.3.4 Alarms ......................................................................................................................... 77 10.1.3.5 Alarm Relay Output .................................................................................................... 81 10.1.4 Indicators ....................................................................................................................... 82 10.2 Advanced Menu .................................................................................................. 83 10.2.1 Interface ......................................................................................................................... 83 10.2.1.1 Display/ Transponder IP ............................................................................................. 84 10.2.1.2 External display ........................................................................................................... 85 10.2.1.3 Aux. Display/Pilot Port ................................................................................................ 86 10.2.1.4 Baud rate .................................................................................................................... 87 10.2.1.5 Priorities...................................................................................................................... 88 10.2.1.6 Port Monitor ............................................................................................................... 89 TR-8000 Operator and Installation Manual 10.2.2 VHF link/Long Range ...................................................................................................... 90 10.2.2.1 Autonomous Long Range ............................................................................................ 90 10.2.2.2 Polled Long Range ...................................................................................................... 90 10.2.2.3 Silent mode ................................................................................................................. 91 10.2.2.4 Display SART in TEST mode ......................................................................................... 91 10.2.2.5 Test Communication ................................................................................................... 92 10.2.3 CPA/TCPA settings.......................................................................................................... 93 10.2.4 Internal GPS ................................................................................................................... 94 10.2.5 History Log ..................................................................................................................... 95 10.2.6 Self Test .......................................................................................................................... 96 10.2.7 System ............................................................................................................................ 97 10.2.7.1 Change password ........................................................................................................ 97 10.2.7.2 Update Firmware ........................................................................................................ 97 10.2.8 Current position ............................................................................................................. 98 11 Menu tree ............................................................................................... 99 12 List of VHF Channels .............................................................................. 100 13 Complied Standards .............................................................................. 101 14 Outline Drawings .................................................................................. 102 14.1 TR-8000 Transponder Unit ................................................................................ 102 14.2 TR-8000 Display Unit, Desktop or Overhead mount ......................................... 103 14.3 TR-8000 Display Unit, Flush/Panel mount ........................................................ 104 14.4 AIS Antenna Splitter .......................................................................................... 105 14.5 Procom CXL 2-1LW/h Maritime VHF Antenna .................................................. 106 14.6 Procom GPS 4 Antenna ..................................................................................... 107 14.7 SANAV – GPS Marine Antenna .......................................................................... 108 14.8 AC Marine VHF/GPS-B ....................................................................................... 109 15 Abbreviations and Definitions ............................................................... 110 16 Service Procedure ................................................................................. 114 16.1 Tron TR-8000 AIS Installation – registration form ............................................ 115 16.2 Trouble Description Form ................................................................................. 116 17 SERVICE AGENTS ................................................................................... 117 18 List of Figures ........................................................................................ 118 TR-8000 Operator and Installation Manual 1 Revision History Revision no. By Date Initial FIT 30.1.2012 FIT 7.2.2012 FIT 2.3.2012 FIT 17.4.2012 FIT 4.6.2012 FIT 19.6.2012 FIT 26.6.2012 Page(s) All Versions Reason for change Transponder Unit: HW: 1142-01 SW: 01.00.05 - 2141 Display Unit: HW: 1125-00 SW: 01.00.05 - 2140 Manual: A Initial release 6, 8, 53, 86, 96 Manual: B Typographic errors, missing references, corrected screenshots 17,37 Manual: C “Default Brightness“ behaviour change all Manual: D Changes related to approval process Manual: E - New screenshots -Optional items added -Added cable colour codes - Changes related to simplified zoom Manual: F -New Firmware Manual: G -New Firmware -Add cable sizes many 6,7 6,7,53,54 TR-8000 Operator and Installation Manual 2 Software revisions The TR-8000 is delivered with SW version according to table below which is filled in by either Jotron, our Distributor, Dealer or Installation company. When SW update is done according to instructions in Jotron TB 01-2012 (Technical Bulletin), an additional line of information will be filled in to reflect the latest change. There will be no need for retraining after SW upgrade is performed. The submeny that shows SW versions can be found selecting: (Configuration ) Advanced System Transponder unit 01.00.05 - 2141 Display unit 01.00.05 - 2140 By Date Change Jotron 30.1.2012 Initial release 01.00.05 - 2240 01.00.05 SVN: 2208 Jotron 4.6.2012 Transponder: - Improvements Display: - Simplified Zoom 01.00.05 - 2244 01.00.05 SVN: 2250 Jotron 19.6.2012 Transponder: - Memory Init. Display: - Added zoom - Fix:” Head up” Jotron 26.6.2012 Transponder: - Fix: “Test Comm.” - Fix: “TX malf.log” 01.00.05 - 2255 TR-8000 Operator and Installation Manual 3 3.1 Introduction Safety Instructions This equipment should be installed according to the instructions found in the installation part of this manual. The equipment should not be mounted in a way that exposes it for excessive heat from the sun or other sources. The equipment should not be mounted in a flammable environment. The equipment should not be mounted in a way that exposes it to direct rain or water. CAUTION! This equipment contains CMOS integrated circuits. Observe handling precautions to avoid static discharges which may damage these devices. Do not open equipment. Only qualified personell should service the equipment. 3.2 Compass Safe Distance Transponder unit: Standard Compass: Steering compass: Display unit: Standard Compass: Steering compass : 3.3 95cm 65cm 30cm 14cm Copyright Notice This manual, as well as the software described in it, is furnished under license and may be used or copied only in accordance with the terms of such license. The content of this manual is furnished for informational use only, is subject to change without notice, and should not be constructed as a commitment by Jotron AS. Except as permitted by such license, no part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, recording, or otherwise, without the prior written permission by Jotron AS. Please remember that existing artwork or images that you want to include in your project may be protected under copyright law. The unauthorized incorporation of such material into your new work could be a violation of the rights of the copyright owner. Please be sure to obtain any permission required from the copyright owner. 3.4 Disclaimer Notice The information in this book has been carefully checked and is believed to be accurate. However, no responsibility is assumed for inaccuracies. Jotron AS reserves the right to make changes without further notice to any products or modules described herein to improve reliability, function or design. Jotron AS does not assume any liability arising out of the application or use of the described product TR-8000 Operator and Installation Manual 3.5 Disposal Instructions The TR-8000 Transponder and Display shall be disposed according to local regulations regarding Electronic Waste Recycling in the country the equipment is taken ashore. At time of writing this manual (2012), there are some common regulations which allies: Europe: Directive 2002/96/EC (WEEE) Waste Electrical and Equipment Directive Equipment is labeled with this symbol: USA: Most states have implemented some kind of recycling act, but there is not yet a federal law about this issue. Elsewhere: Follow local regulations regarding disposal of electronic equipment 3.6 Software and Hardware revisions See chapter 1 & 2 3.7 Ingress protection Transponder unit: IP56 IPx6 IEC 60945, Exposed Display unit: IP54 IEC 60945, Protected TR-8000 Operator and Installation Manual 4 Operation general introduction Thank you for purchasing this Jotron AIS Class A transceiver. The Jotron TR-8000 has been developed to offer you the highest level of performance and durability and we hope that it will provide many years of reliable service. This product has been designed to meet the highest possible quality standards and should you encounter any problems with this product, please contact your local dealer who will be pleased to offer any assistance. 4.1 About AIS in general The system is based on the IMO regulation for AIS using Self Organized Time Division Multiple Access (SOTDMA) technology based on a VHF Data Link (VDL). The system operates in the following modes: o Autonomous (continuous operation in all areas) o Assigned (data transmission interval remotely controlled by authority in traffic monitoring service) o Polled (in response to interrogation from a ship or authority) o Silent (listening only, use with caution) The system is synchronized with GPS time (UTC) to avoid conflict among multiple users. If GPS data is not available, the system is self synchronized using the VDL. The VHF channels 2087 and 2088 are the main AIS channels in addition to local AIS frequencies. AIS transponders onboard ships exchange various data as specified by IMO and ITU on either frequency set up by : o The frequency management telecommand (DSC) o Special AIS messages sent from a AIS Base station. o Manual input of special region The normal transmit power is 12.5W, but under certain conditions, as during tanker loading (according to ISGOTT regulation), or the use of regional settings, a low power option (1W) is automatically selected. TR-8000 Operator and Installation Manual 10 5 Equipment List 5.1 Standard Supply 85500 TR-8000 AIS Class A : Stock No. 85300 85400 85041 85042 85720 86853 86854 86145 86848 86581 Name TR-8000 Transponder Unit TR-8000 Display Unit Mounting bracket, Display unit Locking ring, mounting bracket Curled knob, mounting bracket GPS Antenna, std GPS Antenna stainless stand Cable, 5m Patch RJ45 waterproof Operator and Installation Manual Power cable, TR-8000 Display unit Type SANAV SA-200 Qty. Plug Kit consisting of: TNC connector for RG214 cable BNC Connector “ RG214 cable Power connector …… 5.2 Optional Supply Stock No. 82484 Name VHF Antenna Type Procom CXL 2-1LW/h 84401 81768 86870 80665 92375 97521 81986 GPS/VHF combined antenna Jotron Signal Splitter Pilot cable for TR-8000 display AC/DC Power 100-240 VAC/ 24V DC 240V AC cable, Europe (for 80665) AC Power cable, UK. (for 80665) AC Power cable, USA (for 80665) AC Marine AIS/GPS-B TR-8000 Operator and Installation Manual Jotron Jotron Jotron Jotron Jotron 11 6 TR-8000 Description The Tron AIS TR-8000 consists of two separate units interconnected by Ethernet. The Transponder is the main unit, handling the basic AIS functionality, including sensors and RF functions, while the Display unit is used for setup and display of the AIS data. TR-8000 Operator and Installation Manual 12 6.1 Functionality The main features are: Safety of navigation by automatically exchanging navigational data between ships (Class A transponders), coast stations, Class B transponders and receiving positional data from AIS-SARTs (Search and Rescue beacons) and AtoNs (Aids to Navigation). Class A AIS transmitter and receiver (transponder) Class B compatible (receives all Class B messages) Short safety related messages and other short messages. 7” color LCD panel with LED backlight connects to transponder unit using Ethernet. Interfaces for AIS compatible radar, ECDIS/ECS/Chart plotter and/or PC selectable through RS422 (IEC 61162-2), RS232 or Ethernet (UDP). GPS and VHF antenna separate or combined, for easy installation available. Built-in GPS receiver for time synchronization and backup position. SD-Card slot for future upgrades. The information exchanged between ships using AIS transponders are: Static data: MMSI (Maritime Mobile Service Identity). IMO number (where available). Call sign and name. Length and beam. Type of ship. Location of position-fixing antenna on the ship. Dynamic data: Ships position with accuracy indication and integrity status. UTC. Course over ground (COG). Speed over ground (SOG). Heading. Navigation status (manual input). Rate of turn (where available). Voyage related data: Ships draught. Hazardous cargo (type). Destination and ETA (at masters discretion). TR-8000 Operator and Installation Manual 13 6.2 Transponder Unit The Transponder Unit contains all the core functionality of the AIS system and can function as a separate unit connected to other display solutions confirming with the Front View AIS message format. It consists of a splash proof Alumina casing with the following connection possibilities: VHF antenna and GPS antenna Display connector (Ethernet) External display connections (“Ecdis Port” and “Pilot/Aux Port”). Side View Sensor connections DGNSS/DGPS Beacon receiver connection Alarm relay Complies with the environmental requirements specified in IEC 60945 Ed.4 Exposed, and is certified for IP56 /IPX6. The operating temperature is from -25°C to +55°C and storage temperature from -30°C to +70°C The receiving section of the Transponder consists of three VHF receiver circuits, for continuous reception on both AIS channels (configurable from 154MHz-164MHz) and the DSC channel (ch70). The transmitter circuitry is connected to the same antenna terminal and is switched internally. Functionality for direct reporting with satellites (Long-range AIS broadcast) is implemented and operates when so configured by the competent authorities. The internal power supply of the Transponder is galvanically isolated in order to protect the internal circuitry and operates in a wide voltage input range from 10.8V – 31.2V. A backup power source can be connected if available. Automatically switching to backup power source will take place if the main source of power is lost. TR-8000 Operator and Installation Manual 14 6.2.1 LED Indicators: Transmission Reception Alarm Status 6.2.2 Main functionality: Transmit and receive AIS data packets over the VHF link Receive DSC messages Provide time and position data from internal GPS Receive and handle data from external sensors. Provide information about own and other ships positions to the display units, both the TR-8000 Display unit, and to high speed ports like “External Display” and “Pilot/Aux Display”. 6.2.3 VHF Antenna Connector This is a BNC type antenna connector to be connected directly to an external VHF antenna or antenna splitter to receive and transmit VHF frequencies. For more information see section 8.2.2 6.2.4 GPS Antenna Connector This is a TNC type antenna connector to be connected directly to an external GPS antenna or antenna splitter to receive GPS information. For more information see section 8.2.1 TR-8000 Operator and Installation Manual 15 6.2.5 External Display (Ethernet) Connector RJ45 type waterproof Ethernet connection For more information see section 8.3.1.5 6.2.6 Multipurpose Cable Glands The Transponder Unit is fitted with up to 9 multipurpose cable glands for waterproof, shielded connection with the unit. There are 3 different sizes in order for the best possible fit for different cable types. All wiring should be drawn in shielded cables connected to the chassis of the Transponder by the cable glands. The multipurpose connection glands are provided as in . Max Quantity Min Cable Outer Ø [mm] 3.5 4.5 Max Cable Outer Ø [mm] 12.5 Minimum Ø above braiding [mm] Recommended use Sensors Communication Power Table 1: Quantity and specification of multipurpose cable glands. TR-8000 Operator and Installation Manual 16 6.3 Display Unit Front View The Display unit is the user interface for the AIS system on the bridge. It is used to configure the TR-8000 system and to present AIS data about own and other ships, both graphically and in list form. The Display Unit consists of a splash proof housing with a 7 inch LCD colour display with touch screen. Splash proof connections for Main and Backup power, Pilot plug and Transponder (Ethernet) are present on the back side of the unit. The internal power supply is switched in order to obtain a high efficiency over the whole voltage input range from 10.8V – 31.2V. A Backup power source can be connected if available. This will be automatically switched in if the main source of power is lost. Rear View The main features of the Tron AIS Display Unit are: Give the user information about other ships with AIS in the vicinity. Enable the user to obtain information about other ships and send and receive safety messages to other ships with AIS Transponders. CPA/TCPA Enable the user to configure the AIS System. Alert the user about alarms from the AIS system. Pilot Port connection directly to the Display Unit. Certified to IP54 and IEC 60945 Ed.4 “Protected”. Operating temperature from -25°C to +55°C and storage temperature from -30°C to +70°C TR-8000 Operator and Installation Manual 17 7 Operational description The operational description chapter assumes that the TR-8000 Ais Transponder is fully installed using the instructions found in the Installation chapter. 7.1 On/Off button ON/OFF button handles 3 different options When ON/OFF is pushed, a popup menu is displayed with some display Options. Additionally, if the brightness is low, it will automatically be increased. This feature can be used if the user by some reason has too low visibility to adjust the brightness the regular way. If the Default Brightness button is pressed, the brightness will be set to a 50% value. Otherwise the current brightness level will be restored when the dialog is closed. 7.1.1 Clean Screen Clean Screen is a function which turns off all touch sensitivity, enabeling the user to clean the screen without pushing buttons unintentionally. TR-8000 Operator and Installation Manual 18 7.1.2 Power off Display If the Power off Display is selected, only the Display Unit is turned OFF and the AIS functionality of the Transponder will still be active. Note that the ship list will need some time to recover when turning the Display unit on again. This is dependent on when the messages from the different vessels are received. The message logs for sent and received messages will also be lost. Note that the Transponder unit will issue an alarm when the display is shut down, and there may be no means to acknowledge this alarm if the display is turned off! TR-8000 Operator and Installation Manual 19 7.2 Display Unit menu system. Status Bar Content Section Button Bar The main window contains three main sections. 7.2.1 Status Bar Dynamic navigational data (Position, Speed, Heading etc.) Clock Other informative icons (Tx,Rx, Nav status, Alarms etc. ) The Status bar is visible in all the sub menus. TR-8000 Operator and Installation Manual 20 7.2.2 Content Section Displays the current selected window and the corresponding data Example below shows Main View: Main View is a combination of Graphical and List view: North or Graphical List Press column to Sort Head Up Rings AToN Base Station AIS-SART Own Ship SAR Aircraft Selected Target Zoom Out Zoom In Vessels displayed Number of vessels received All menus, menu buttons and settings are displayed in this section. 7.2.3 Button Bar Contains all the functional buttons for above window: Config Messages Display Voyage Down Up Enter List The functionality of the buttons on the Button Bar is dependent on the content of the Content Section. TR-8000 Operator and Installation Manual 21 7.2.4 Important Buttons shown in different Views: Return to last menu without saving. Confirm, save data and return to last menu. If the Icon is not highlighted, indicates no data has changed The Home button will take you to Main view without saving. Enter – Show detailed information (“Page 1”) on selected item Will be shown when vessel is selected with Enter button and will show “Page 2” of information about vessel When “Page 2” of Vessel information is shown, this button can be used to switch back to “Page 1” Arrow Down –Select next item on a list Arrow Up –Select previous item on a list Arrow Right – Select item to the right Arrow Left – Select item to the left Configuration – of Own ship, Display, Regions, Alarms, Indicators and Advanced Messages – See Received and Sent messages, Reply to received and send New Display setting – Adjust Brightness or select Day/Night mode Voyage settings – Nav. Status, Destination, ETA, Draught, Cargo, Persons aboard Some of the functions cannot be altered without entering a password. There are two levels of passwords, a user password and an administrator password. The default passwords are “OP” and “SE”. TR-8000 Operator and Installation Manual 22 7.2.5 Indicating ICONS Receive data on either of the two AIS channels. If Inactive, shown as Transmit on either channel A or B shown as TxA or TxB. Icon shown is Inactive. Active is shown with Green color as the Rx icon above. Alarm Status: No alarms Alarm caused by one or more incidents from Table 3 Navigation Status: Under way using Engine At Anchor Not Under Command Restricted Manoeuvrability Constrained by her draught Moored Aground Fishing Sailing Transmission Modes : Silent Mode - Transmission is turned OFF Normal transmission mode (12.5W) Low Power (1 W) if Vessel type = “Tanker” and speed is below 3 knots and Navigation Status = “Moored” TR-8000 Operator and Installation Manual 23 7.2.6 Ship List The display unit receives data about all the ships with an active AIS transmitter in the area and presents this data in a list in the main window. The list displays the name or MMSI, range to own ship, bearing and age of presented data. When the graphical view is off, course and speed are also displayed. The list can be sorted on any of these criteria, but an AIS SART will always be presented at the top of the list. The columns “Name/MMSI”, “RNG”,”BRG” and “Age” are always present, but “SOG” and “COG” may be replaced by “CPA” and “TCPA” or added in addition (See paragraph 10.2.3 ) Example of all listed: TR-8000 Operator and Installation Manual 24 7.2.6.1 Column description Name/MMSI : Shows the MMSI (Maritime Mobile Service Identity) of the ship until its Name is received. Name is transmitted more seldom than MMSI numbers RNGNM: Is the Range to the Vessel in Nautical Miles (NM) BRG°: Bearing to the Vessel in degrees from your position SOGkn : Speed Over Ground in Knots COG°: Course Over Ground in degrees CPANM: Closest Point of Approach : An estimated point in which the distance between you and the other vessel are at its minimum value TCPAmin: Time To Closest Point of Approach : The time (in Minutes) until you reach the CPA Agemin: Shows how many minutes since last reception from this vessel TR-8000 Operator and Installation Manual 25 7.2.7 Graphical View The graphical display of the ship list plots the positions of other AIS targets relative to your own position in a frame on the left side. A vessel with neither a reported heading nor COG will be oriented toward the top of display area. The user is able to switch between North Up and Head Up, but if no heading or COG is available, or if the ship is anchored/moored, the North Up configuration will automatically be chosen. If a valid heading is received from external heading sensor (Gyro, Satellite compass or similar), own ship will be oriented according to this. If heading is lost, Course Over Ground (COG) will be second choice for own ships orientation on the display. The setup is done in the Display Settings menu. In this menu, it is also possible to toggle between Graphical and List view as default. In the display menu, the user can choose not to return to the graphical view when exiting menus. TR-8000 Operator and Installation Manual 26 Different types of targets are displayed with different icons. Active Vessel If the CPA/TCPA system is activated, ships on collision course are displayed with a red color and double thickness of the lines. Own ship is indicated in the same way as other ships, but is always in center. Sleeping target Smaller symbol than “Active Vessel” without a beam line Sleeping targets are defined based on either: Range more than X Nautical miles Class B Activation can be either of the definitions above and can be visible or not AIS base station AtoN An Aids to navigation buoy indicating that it is off position is indicated with a red color. AIS SART. Will be displayed with a red color. AIS TEST will be displayed with normal color. SAR Aircraft TR-8000 Operator and Installation Manual 27 7.3 Voyage Settings Red square shows button selected to get to this menu The Voyage Settings contains all the ship data to be entered or changed before or on each voyage. In order for the AIS system to function correctly, it is important to keep these parameters up to date. You may use one of these buttons: Navigational Status Destination ETA (Estimated Time of Arrival) Draught Cargo Category Persons Aboard to set correct information for the Voyage TR-8000 Operator and Installation Manual 28 7.3.1 Navigational Status The options available for the navigational status are as follows. Under way using engine, At anchor, Not under command 1, Restricted manoeuvrability 2, Constrained by her draught 3, Moored, Aground, Engaged in fishing 4 Under way sailing 5 Not Defined (Default) 6 Vessel not under command means a vessel which through some exceptional circumstance is unable to maneuver as required by these Rules and is therefore unable to keep out of the way of another vessel. Vessel restricted in her ability to manoeuver means a vessel which from the nature of her work is restricted in her ability to manouvre as required by these Rules and is therefore unable to keep out of the way of another vessel. The term “vessels restricted in their ability to manoeuvre” shall include but not be limited to: A vessel engaged in laying, servicing or picking up a navigation mark, submarine cable or pipeline; A vessel engaged in dredging, surveying or underwater operations; A vessel engaged in replenishment or transferring persons, provisions or cargo while underway; A vessel engaged in the launching or recovery of aircraft; A vessel engaged in mine clearance operations; A vessel engaged in a towing operation such as severely restricts the towing vessel and her tow in their ability to deviate from their course. Vessel constrained by her draught means a power-driven vessel which, because of her draught in relation to the available depth and width of navigable water, is severely restricted in her ability to deviate from the course she is following. Engaged in fishing means any vessel fishing with nets, lines, trawls or other fishing apparatus which restrict manoeuvrability, but does not include a vessel fishing with trolling lines or other fishing apparatus which do not restrict manoeuvrability. Under ways sailing means any vessel under sail provided that propelling machinery, if fitted, is not being used. Not Defined (Default) is used when TR-8000 is delivered from factory. Then none of above selections are made TR-8000 Operator and Installation Manual 29 7.3.2 Destination The destination of the voyage is to be entered here using a maximum of 20 characters. NOTE! Many countries require destination input is according to GUIDANCE ON THE USE OF THE UN/LOCODE IN THE DESTINATION FIELD IN AIS MESSAGES from IMO SN/Circ.244 Text from the Guidance: Recommended use of the UN/LOCODE 6. The recommended format is to indicate the port of departure at the first six positions of the data field followed by a separator and then the code for the next port of call. 7. In order to identify that it is a LOCODE, to separate the locations and to indicate the ‘from’ and ‘to’ ports, a ‘>’. symbol should be used as a separator. See example below. A ship is leaving Dubai bound for Rotterdam. Use of the UN/LOCODE would represent this voyage as below: “AE DXB>NL RTM” 8. If the next port of call is unknown, “?? ???” should be entered instead of the UN/LOCODE in the corresponding place in the data field. See example below: ”AE DXB>?? ???” 9. If the port of departure does not have a designated UN/LOCODE then “XX XXX” should be entered instead of the UN/LOCODE in the corresponding place in the data field. See example below: “XX XXX>US PBI” 10. If the next port of call does not have a designated UN/LOCODE the commonly accepted English name of the destination port should be entered, preceded by “===” (3 “equals signs”). If no such name is known, the locally used name should be entered. In this case, there may not be enough space available to indicate the port of departure. See example below: “===Orrviken” 11. If only the general area of destination is known the name or accepted abbreviation of the area preceded by “===” (“three equals signs”) should be entered. See example below: “NL RMT> === US WC” Indicating a destination on the United States West Coast. TR-8000 Operator and Installation Manual 30 7.3.3 ETA The Estimated Time of Arrival is displayed to other AIS units and should be updated if the expected arrival time is changed. 7.3.4 Persons Aboard (optional) This parameter indicates the number of persons aboard the ship at the given moment. This parameter is not sent to other ships or base stations, only through the Long Range Port which is normally not used (in 2011) 7.3.5 Cargo Category Identifies Hazardous cargo, depending on the ship class. See chapter 10.1.1.1for reference. TR-8000 Operator and Installation Manual 31 7.3.6 Draught The Draught parameter specifies the maximum depth of the ship in meters and decimeters. TR-8000 Operator and Installation Manual 32 7.4 Messages WARNING! Use of AIS text messages between ships must not be used to avoid collisions when time is critical. AIS systems are not required to have an audible alarm to indicate the arrival of all text messages. The use of AIS text messaging does not relieve the vessel of other requirements, such as the Vessel Bridge-to-Bridge Radiotelephone regulations or of the requirements to sound whistle signals and display lights or shapes in accordance with the International or Inland Navigation Rules. Usage During Emergencies - With respect to using AIS safety related text messages in emergency situations, users must be aware that they may not be received, recognized or acted upon as Global Maritime Distress Safety Systems (GMDSS) messages would be by the Coast Guard, other competent authorities or maritime first responders. Thus AIS must not be relied upon as the primary means for broadcasting distress or urgent communications, nor used in lieu of GMDSS such as Digital Selective Calling radios which are designed to process distress messaging. Nonetheless, AIS remains an effective means to augment GMDSS and provides the added benefit of being ‘seen’ (on radar or chart displays), in addition to being ‘heard’ (via text messaging) by other AIS users within VHF radio range (Ref: USCG Safety Alert 05-10). Red square shows button selected to get to this menu The messages Icon opens the 7.4.1 Received messages By pushing the buttons on the bottom bar, you can switch to: Sent messages Write New Reply Scroll up or down through received messages When you select one of the messages in the list, you will see the content in the right window If you press the button, the display will swap to: TR-8000 Operator and Installation Manual 33 7.4.2 Popup when received message Example showing “Popup” of received “Safety message” from AIS SART The message must be acknowledged by pressing “Close” button 7.4.3 Sent messages By pushing the buttons on the bottom bar, you can switch to: Received messages Write New Resend Scroll up or down through sent messages When you select one of the messages in the list, you will see the content in the right window There is also a “Status” field on each line showing: Message SENT OK Message transmission in PROGRESS Message transmission FAILED TR-8000 Operator and Installation Manual 34 7.4.4 Write New message Be advised, all messages in this context are SAFETY RELATED and should not be used for other purposes. For this reason, this functionality is protected by a user password. Default Password = OP Select here message recipients: From list (Of received ships) Enter MMSI (directly) Broadcast (to all) TR-8000 Operator and Installation Manual 35 7.4.4.1 Message recipients “From list” Select 1. Which ship 2. Confirm with Then a new window opens: 7.4.4.1.1 Write text When a target is selected, the keyboard window opens, and allows the user to write a message. The total allowed length is 156 characters. Confirm with Which opens the 7.4.4.1.2 Choose channels and SEND Select preference Send : TR-8000 Operator and Installation Manual 36 7.4.4.2 Message recipients “Enter MMSI” 1. 2. 3. 4. Enter MMSI Confirm with Write Text (as described above) Select Channel and Send (-“”-) 7.4.4.3 Message recipients “Broadcast” 1. Write Text (as described above) 2. Select Channel and Send TR-8000 Operator and Installation Manual 37 7.5 Display Settings Red square shows button selected to obtain to this menu In the Display settings menu, you can adjust Brightness level and switch between night and day mode. Each mode has its own brightnesslevel. In the low brightness end of the scale, the steps are more accurate to adapt to very low intensity levels. Touching the empty area at the left or right side of the display restores a 50% brightness level if the display gets too dark to see the actual buttons for this purpose. Restoring of 50% brightness level is also accessable by pressing the on/off button (see chapter 7.1) Press “Home” to return to Main Window again TR-8000 Operator and Installation Manual 38
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Page Count : 38 Creator : pdfsam-console (Ver. 2.4.0e) Producer : iText 2.1.7 by 1T3XT Modify Date : 2012:08:28 15:24:04+02:00 Create Date : 2012:08:28 15:24:04+02:00EXIF Metadata provided by EXIF.tools
Operator and Installation Manual part1
Table of Contents Revision History ........................................................................................ 6 Software revisions..................................................................................... 7 Introduction .............................................................................................. 8 3.1 Safety Instructions................................................................................................. 8 3.2 Compass Safe Distance ......................................................................................... 8 3.3 Copyright Notice.................................................................................................... 8 3.4 Disclaimer Notice .................................................................................................. 8 3.5 Disposal Instructions ............................................................................................. 9 3.6 Software and Hardware revisions ......................................................................... 9 3.7 Ingress protection ................................................................................................. 9 Operation general introduction ............................................................... 10 4.1 Equipment List ........................................................................................ 11 5.1 Standard Supply .................................................................................................. 11 5.2 Optional Supply ................................................................................................... 11 TR-8000 Description ................................................................................ 12 6.1 Functionality ........................................................................................................ 13 6.2 Transponder Unit ................................................................................................ 14 6.2.1 LED Indicators: ............................................................................................................... 15 6.2.2 Main functionality: ......................................................................................................... 15 6.2.3 VHF Antenna Connector ................................................................................................ 15 6.2.4 GPS Antenna Connector................................................................................................. 15 6.2.5 External Display (Ethernet) Connector .......................................................................... 16 6.2.6 Multipurpose Cable Glands............................................................................................ 16 6.3 About AIS in general ............................................................................................ 10 Display Unit ......................................................................................................... 17 Operational description .......................................................................... 18 7.1 On/Off button ..................................................................................................... 18 7.1.1 Clean Screen................................................................................................................... 18 7.1.2 Power off Display ........................................................................................................... 19 7.2 Display Unit menu system. .................................................................................. 20 7.2.1 Status Bar ....................................................................................................................... 20 7.2.2 Content Section.............................................................................................................. 21 7.2.3 Button Bar ...................................................................................................................... 21 7.2.4 Important Buttons shown in different Views: ............................................................... 22 TR-8000 Operator and Installation Manual 7.2.5 Indicating ICONS............................................................................................................. 23 7.2.6 Ship List .......................................................................................................................... 24 7.2.6.1 7.2.7 7.3 Graphical View ............................................................................................................... 26 Voyage Settings ................................................................................................... 28 7.3.1 Navigational Status ........................................................................................................ 29 7.3.2 Destination ..................................................................................................................... 30 7.3.3 ETA ................................................................................................................................. 31 7.3.4 Persons Aboard (optional) ............................................................................................. 31 7.3.5 Cargo Category ............................................................................................................... 31 7.3.6 Draught .......................................................................................................................... 32 7.4 Messages ............................................................................................................. 33 7.4.1 Received messages ........................................................................................................ 33 7.4.2 Popup when received message ..................................................................................... 34 7.4.3 Sent messages ................................................................................................................ 34 7.4.4 Write New message ....................................................................................................... 35 7.5 Column description....................................................................................................... 25 7.4.4.1 Message recipients “From list” ..................................................................................... 36 7.4.4.2 Message recipients “Enter MMSI”................................................................................ 37 7.4.4.3 Message recipients “Broadcast” ................................................................................... 37 Display Settings ................................................................................................... 38 Installation .............................................................................................. 39 8.1 Mechanical Mounting ......................................................................................... 39 8.1.1 Transponder unit............................................................................................................ 39 8.1.2 Display Unit .................................................................................................................... 40 8.1.3 8.2 8.1.2.1 Desktop Mounting ........................................................................................................ 40 8.1.2.2 Roof Mounting .............................................................................................................. 41 8.1.2.3 Flush/ Panel Mounting ................................................................................................. 42 Antennas ........................................................................................................................ 43 8.1.3.1 GPS Antenna ................................................................................................................. 44 8.1.3.2 VHF Antenna ................................................................................................................. 46 Cabling ................................................................................................................. 47 8.2.1 GPS antenna ................................................................................................................... 47 8.2.2 VHF antenna................................................................................................................... 48 8.2.3 Cable between Transponder and Display Unit .............................................................. 48 8.3 8.3.1 Wiring and Connections ...................................................................................... 49 Transponder ................................................................................................................... 50 8.3.1.1 Pictorial display of typical connections to the transponder ......................................... 51 TR-8000 Operator and Installation Manual 8.3.2 8.3.1.2 Label in transponder with connection tables ............................................................... 52 8.3.1.3 Power connection ......................................................................................................... 53 8.3.1.4 Sensor connections ....................................................................................................... 54 8.3.1.5 External display – ECDIS/Radar connections ................................................................ 55 8.3.1.6 Pilot / Aux. Display connection ..................................................................................... 56 8.3.1.7 Alarm Connection ......................................................................................................... 57 8.3.1.8 Detailed description of connections, fuses, factory reset etc. ..................................... 58 Display Unit: ................................................................................................................... 60 Initial configuration ................................................................................. 63 9.1 Short reference for initial configuration ............................................................. 63 9.2 Not all ships carry AIS .......................................................................................... 63 9.3 Use of AIS in collision avoidance ......................................................................... 63 9.4 Erroneous information ........................................................................................ 64 10 Operation Instructions ............................................................................ 65 10.1 Configuration Menu ............................................................................................ 65 10.1.1 Own Ship ........................................................................................................................ 65 10.1.1.1 Type of Vessel ............................................................................................................. 66 10.1.1.2 Ship Dimension and Antenna Position ....................................................................... 67 10.1.2 Display Settings .............................................................................................................. 68 10.1.2.1 Sleeping Targets.......................................................................................................... 68 10.1.2.2 Views .......................................................................................................................... 68 10.1.3 Regional Settings ............................................................................................................ 69 10.1.3.1 Current Region settings .............................................................................................. 69 10.1.3.2 View Regions .............................................................................................................. 70 10.1.3.3 Add Region.................................................................................................................. 71 10.1.3.4 Alarms ......................................................................................................................... 77 10.1.3.5 Alarm Relay Output .................................................................................................... 81 10.1.4 Indicators ....................................................................................................................... 82 10.2 Advanced Menu .................................................................................................. 83 10.2.1 Interface ......................................................................................................................... 83 10.2.1.1 Display/ Transponder IP ............................................................................................. 84 10.2.1.2 External display ........................................................................................................... 85 10.2.1.3 Aux. Display/Pilot Port ................................................................................................ 86 10.2.1.4 Baud rate .................................................................................................................... 87 10.2.1.5 Priorities...................................................................................................................... 88 10.2.1.6 Port Monitor ............................................................................................................... 89 TR-8000 Operator and Installation Manual 10.2.2 VHF link/Long Range ...................................................................................................... 90 10.2.2.1 Autonomous Long Range ............................................................................................ 90 10.2.2.2 Polled Long Range ...................................................................................................... 90 10.2.2.3 Silent mode ................................................................................................................. 91 10.2.2.4 Display SART in TEST mode ......................................................................................... 91 10.2.2.5 Test Communication ................................................................................................... 92 10.2.3 CPA/TCPA settings.......................................................................................................... 93 10.2.4 Internal GPS ................................................................................................................... 94 10.2.5 History Log ..................................................................................................................... 95 10.2.6 Self Test .......................................................................................................................... 96 10.2.7 System ............................................................................................................................ 97 10.2.7.1 Change password ........................................................................................................ 97 10.2.7.2 Update Firmware ........................................................................................................ 97 10.2.8 Current position ............................................................................................................. 98 11 Menu tree ............................................................................................... 99 12 List of VHF Channels .............................................................................. 100 13 Complied Standards .............................................................................. 101 14 Outline Drawings .................................................................................. 102 14.1 TR-8000 Transponder Unit ................................................................................ 102 14.2 TR-8000 Display Unit, Desktop or Overhead mount ......................................... 103 14.3 TR-8000 Display Unit, Flush/Panel mount ........................................................ 104 14.4 AIS Antenna Splitter .......................................................................................... 105 14.5 Procom CXL 2-1LW/h Maritime VHF Antenna .................................................. 106 14.6 Procom GPS 4 Antenna ..................................................................................... 107 14.7 SANAV – GPS Marine Antenna .......................................................................... 108 14.8 AC Marine VHF/GPS-B ....................................................................................... 109 15 Abbreviations and Definitions ............................................................... 110 16 Service Procedure ................................................................................. 114 16.1 Tron TR-8000 AIS Installation – registration form ............................................ 115 16.2 Trouble Description Form ................................................................................. 116 17 SERVICE AGENTS ................................................................................... 117 18 List of Figures ........................................................................................ 118 TR-8000 Operator and Installation Manual 1 Revision History Revision no. By Date Initial FIT 30.1.2012 FIT 7.2.2012 FIT 2.3.2012 FIT 17.4.2012 FIT 4.6.2012 FIT 19.6.2012 FIT 26.6.2012 Page(s) All Versions Reason for change Transponder Unit: HW: 1142-01 SW: 01.00.05 - 2141 Display Unit: HW: 1125-00 SW: 01.00.05 - 2140 Manual: A Initial release 6, 8, 53, 86, 96 Manual: B Typographic errors, missing references, corrected screenshots 17,37 Manual: C “Default Brightness“ behaviour change all Manual: D Changes related to approval process Manual: E - New screenshots -Optional items added -Added cable colour codes - Changes related to simplified zoom Manual: F -New Firmware Manual: G -New Firmware -Add cable sizes many 6,7 6,7,53,54 TR-8000 Operator and Installation Manual 2 Software revisions The TR-8000 is delivered with SW version according to table below which is filled in by either Jotron, our Distributor, Dealer or Installation company. When SW update is done according to instructions in Jotron TB 01-2012 (Technical Bulletin), an additional line of information will be filled in to reflect the latest change. There will be no need for retraining after SW upgrade is performed. The submeny that shows SW versions can be found selecting: (Configuration ) Advanced System Transponder unit 01.00.05 - 2141 Display unit 01.00.05 - 2140 By Date Change Jotron 30.1.2012 Initial release 01.00.05 - 2240 01.00.05 SVN: 2208 Jotron 4.6.2012 Transponder: - Improvements Display: - Simplified Zoom 01.00.05 - 2244 01.00.05 SVN: 2250 Jotron 19.6.2012 Transponder: - Memory Init. Display: - Added zoom - Fix:” Head up” Jotron 26.6.2012 Transponder: - Fix: “Test Comm.” - Fix: “TX malf.log” 01.00.05 - 2255 TR-8000 Operator and Installation Manual 3 3.1 Introduction Safety Instructions This equipment should be installed according to the instructions found in the installation part of this manual. The equipment should not be mounted in a way that exposes it for excessive heat from the sun or other sources. The equipment should not be mounted in a flammable environment. The equipment should not be mounted in a way that exposes it to direct rain or water. CAUTION! This equipment contains CMOS integrated circuits. Observe handling precautions to avoid static discharges which may damage these devices. Do not open equipment. Only qualified personell should service the equipment. 3.2 Compass Safe Distance Transponder unit: Standard Compass: Steering compass: Display unit: Standard Compass: Steering compass : 3.3 95cm 65cm 30cm 14cm Copyright Notice This manual, as well as the software described in it, is furnished under license and may be used or copied only in accordance with the terms of such license. The content of this manual is furnished for informational use only, is subject to change without notice, and should not be constructed as a commitment by Jotron AS. Except as permitted by such license, no part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, recording, or otherwise, without the prior written permission by Jotron AS. Please remember that existing artwork or images that you want to include in your project may be protected under copyright law. The unauthorized incorporation of such material into your new work could be a violation of the rights of the copyright owner. Please be sure to obtain any permission required from the copyright owner. 3.4 Disclaimer Notice The information in this book has been carefully checked and is believed to be accurate. However, no responsibility is assumed for inaccuracies. Jotron AS reserves the right to make changes without further notice to any products or modules described herein to improve reliability, function or design. Jotron AS does not assume any liability arising out of the application or use of the described product TR-8000 Operator and Installation Manual 3.5 Disposal Instructions The TR-8000 Transponder and Display shall be disposed according to local regulations regarding Electronic Waste Recycling in the country the equipment is taken ashore. At time of writing this manual (2012), there are some common regulations which allies: Europe: Directive 2002/96/EC (WEEE) Waste Electrical and Equipment Directive Equipment is labeled with this symbol: USA: Most states have implemented some kind of recycling act, but there is not yet a federal law about this issue. Elsewhere: Follow local regulations regarding disposal of electronic equipment 3.6 Software and Hardware revisions See chapter 1 & 2 3.7 Ingress protection Transponder unit: IP56 IPx6 IEC 60945, Exposed Display unit: IP54 IEC 60945, Protected TR-8000 Operator and Installation Manual 4 Operation general introduction Thank you for purchasing this Jotron AIS Class A transceiver. The Jotron TR-8000 has been developed to offer you the highest level of performance and durability and we hope that it will provide many years of reliable service. This product has been designed to meet the highest possible quality standards and should you encounter any problems with this product, please contact your local dealer who will be pleased to offer any assistance. 4.1 About AIS in general The system is based on the IMO regulation for AIS using Self Organized Time Division Multiple Access (SOTDMA) technology based on a VHF Data Link (VDL). The system operates in the following modes: o Autonomous (continuous operation in all areas) o Assigned (data transmission interval remotely controlled by authority in traffic monitoring service) o Polled (in response to interrogation from a ship or authority) o Silent (listening only, use with caution) The system is synchronized with GPS time (UTC) to avoid conflict among multiple users. If GPS data is not available, the system is self synchronized using the VDL. The VHF channels 2087 and 2088 are the main AIS channels in addition to local AIS frequencies. AIS transponders onboard ships exchange various data as specified by IMO and ITU on either frequency set up by : o The frequency management telecommand (DSC) o Special AIS messages sent from a AIS Base station. o Manual input of special region The normal transmit power is 12.5W, but under certain conditions, as during tanker loading (according to ISGOTT regulation), or the use of regional settings, a low power option (1W) is automatically selected. TR-8000 Operator and Installation Manual 10 5 Equipment List 5.1 Standard Supply 85500 TR-8000 AIS Class A : Stock No. 85300 85400 85041 85042 85720 86853 86854 86145 86848 86581 Name TR-8000 Transponder Unit TR-8000 Display Unit Mounting bracket, Display unit Locking ring, mounting bracket Curled knob, mounting bracket GPS Antenna, std GPS Antenna stainless stand Cable, 5m Patch RJ45 waterproof Operator and Installation Manual Power cable, TR-8000 Display unit Type SANAV SA-200 Qty. Plug Kit consisting of: TNC connector for RG214 cable BNC Connector “ RG214 cable Power connector …… 5.2 Optional Supply Stock No. 82484 Name VHF Antenna Type Procom CXL 2-1LW/h 84401 81768 86870 80665 92375 97521 81986 GPS/VHF combined antenna Jotron Signal Splitter Pilot cable for TR-8000 display AC/DC Power 100-240 VAC/ 24V DC 240V AC cable, Europe (for 80665) AC Power cable, UK. (for 80665) AC Power cable, USA (for 80665) AC Marine AIS/GPS-B TR-8000 Operator and Installation Manual Jotron Jotron Jotron Jotron Jotron 11 6 TR-8000 Description The Tron AIS TR-8000 consists of two separate units interconnected by Ethernet. The Transponder is the main unit, handling the basic AIS functionality, including sensors and RF functions, while the Display unit is used for setup and display of the AIS data. TR-8000 Operator and Installation Manual 12 6.1 Functionality The main features are: Safety of navigation by automatically exchanging navigational data between ships (Class A transponders), coast stations, Class B transponders and receiving positional data from AIS-SARTs (Search and Rescue beacons) and AtoNs (Aids to Navigation). Class A AIS transmitter and receiver (transponder) Class B compatible (receives all Class B messages) Short safety related messages and other short messages. 7” color LCD panel with LED backlight connects to transponder unit using Ethernet. Interfaces for AIS compatible radar, ECDIS/ECS/Chart plotter and/or PC selectable through RS422 (IEC 61162-2), RS232 or Ethernet (UDP). GPS and VHF antenna separate or combined, for easy installation available. Built-in GPS receiver for time synchronization and backup position. SD-Card slot for future upgrades. The information exchanged between ships using AIS transponders are: Static data: MMSI (Maritime Mobile Service Identity). IMO number (where available). Call sign and name. Length and beam. Type of ship. Location of position-fixing antenna on the ship. Dynamic data: Ships position with accuracy indication and integrity status. UTC. Course over ground (COG). Speed over ground (SOG). Heading. Navigation status (manual input). Rate of turn (where available). Voyage related data: Ships draught. Hazardous cargo (type). Destination and ETA (at masters discretion). TR-8000 Operator and Installation Manual 13 6.2 Transponder Unit The Transponder Unit contains all the core functionality of the AIS system and can function as a separate unit connected to other display solutions confirming with the Front View AIS message format. It consists of a splash proof Alumina casing with the following connection possibilities: VHF antenna and GPS antenna Display connector (Ethernet) External display connections (“Ecdis Port” and “Pilot/Aux Port”). Side View Sensor connections DGNSS/DGPS Beacon receiver connection Alarm relay Complies with the environmental requirements specified in IEC 60945 Ed.4 Exposed, and is certified for IP56 /IPX6. The operating temperature is from -25°C to +55°C and storage temperature from -30°C to +70°C The receiving section of the Transponder consists of three VHF receiver circuits, for continuous reception on both AIS channels (configurable from 154MHz-164MHz) and the DSC channel (ch70). The transmitter circuitry is connected to the same antenna terminal and is switched internally. Functionality for direct reporting with satellites (Long-range AIS broadcast) is implemented and operates when so configured by the competent authorities. The internal power supply of the Transponder is galvanically isolated in order to protect the internal circuitry and operates in a wide voltage input range from 10.8V – 31.2V. A backup power source can be connected if available. Automatically switching to backup power source will take place if the main source of power is lost. TR-8000 Operator and Installation Manual 14 6.2.1 LED Indicators: Transmission Reception Alarm Status 6.2.2 Main functionality: Transmit and receive AIS data packets over the VHF link Receive DSC messages Provide time and position data from internal GPS Receive and handle data from external sensors. Provide information about own and other ships positions to the display units, both the TR-8000 Display unit, and to high speed ports like “External Display” and “Pilot/Aux Display”. 6.2.3 VHF Antenna Connector This is a BNC type antenna connector to be connected directly to an external VHF antenna or antenna splitter to receive and transmit VHF frequencies. For more information see section 8.2.2 6.2.4 GPS Antenna Connector This is a TNC type antenna connector to be connected directly to an external GPS antenna or antenna splitter to receive GPS information. For more information see section 8.2.1 TR-8000 Operator and Installation Manual 15 6.2.5 External Display (Ethernet) Connector RJ45 type waterproof Ethernet connection For more information see section 8.3.1.5 6.2.6 Multipurpose Cable Glands The Transponder Unit is fitted with up to 9 multipurpose cable glands for waterproof, shielded connection with the unit. There are 3 different sizes in order for the best possible fit for different cable types. All wiring should be drawn in shielded cables connected to the chassis of the Transponder by the cable glands. The multipurpose connection glands are provided as in . Max Quantity Min Cable Outer Ø [mm] 3.5 4.5 Max Cable Outer Ø [mm] 12.5 Minimum Ø above braiding [mm] Recommended use Sensors Communication Power Table 1: Quantity and specification of multipurpose cable glands. TR-8000 Operator and Installation Manual 16 6.3 Display Unit Front View The Display unit is the user interface for the AIS system on the bridge. It is used to configure the TR-8000 system and to present AIS data about own and other ships, both graphically and in list form. The Display Unit consists of a splash proof housing with a 7 inch LCD colour display with touch screen. Splash proof connections for Main and Backup power, Pilot plug and Transponder (Ethernet) are present on the back side of the unit. The internal power supply is switched in order to obtain a high efficiency over the whole voltage input range from 10.8V – 31.2V. A Backup power source can be connected if available. This will be automatically switched in if the main source of power is lost. Rear View The main features of the Tron AIS Display Unit are: Give the user information about other ships with AIS in the vicinity. Enable the user to obtain information about other ships and send and receive safety messages to other ships with AIS Transponders. CPA/TCPA Enable the user to configure the AIS System. Alert the user about alarms from the AIS system. Pilot Port connection directly to the Display Unit. Certified to IP54 and IEC 60945 Ed.4 “Protected”. Operating temperature from -25°C to +55°C and storage temperature from -30°C to +70°C TR-8000 Operator and Installation Manual 17 7 Operational description The operational description chapter assumes that the TR-8000 Ais Transponder is fully installed using the instructions found in the Installation chapter. 7.1 On/Off button ON/OFF button handles 3 different options When ON/OFF is pushed, a popup menu is displayed with some display Options. Additionally, if the brightness is low, it will automatically be increased. This feature can be used if the user by some reason has too low visibility to adjust the brightness the regular way. If the Default Brightness button is pressed, the brightness will be set to a 50% value. Otherwise the current brightness level will be restored when the dialog is closed. 7.1.1 Clean Screen Clean Screen is a function which turns off all touch sensitivity, enabeling the user to clean the screen without pushing buttons unintentionally. TR-8000 Operator and Installation Manual 18 7.1.2 Power off Display If the Power off Display is selected, only the Display Unit is turned OFF and the AIS functionality of the Transponder will still be active. Note that the ship list will need some time to recover when turning the Display unit on again. This is dependent on when the messages from the different vessels are received. The message logs for sent and received messages will also be lost. Note that the Transponder unit will issue an alarm when the display is shut down, and there may be no means to acknowledge this alarm if the display is turned off! TR-8000 Operator and Installation Manual 19 7.2 Display Unit menu system. Status Bar Content Section Button Bar The main window contains three main sections. 7.2.1 Status Bar Dynamic navigational data (Position, Speed, Heading etc.) Clock Other informative icons (Tx,Rx, Nav status, Alarms etc. ) The Status bar is visible in all the sub menus. TR-8000 Operator and Installation Manual 20 7.2.2 Content Section Displays the current selected window and the corresponding data Example below shows Main View: Main View is a combination of Graphical and List view: North or Graphical List Press column to Sort Head Up Rings AToN Base Station AIS-SART Own Ship SAR Aircraft Selected Target Zoom Out Zoom In Vessels displayed Number of vessels received All menus, menu buttons and settings are displayed in this section. 7.2.3 Button Bar Contains all the functional buttons for above window: Config Messages Display Voyage Down Up Enter List The functionality of the buttons on the Button Bar is dependent on the content of the Content Section. TR-8000 Operator and Installation Manual 21 7.2.4 Important Buttons shown in different Views: Return to last menu without saving. Confirm, save data and return to last menu. If the Icon is not highlighted, indicates no data has changed The Home button will take you to Main view without saving. Enter – Show detailed information (“Page 1”) on selected item Will be shown when vessel is selected with Enter button and will show “Page 2” of information about vessel When “Page 2” of Vessel information is shown, this button can be used to switch back to “Page 1” Arrow Down –Select next item on a list Arrow Up –Select previous item on a list Arrow Right – Select item to the right Arrow Left – Select item to the left Configuration – of Own ship, Display, Regions, Alarms, Indicators and Advanced Messages – See Received and Sent messages, Reply to received and send New Display setting – Adjust Brightness or select Day/Night mode Voyage settings – Nav. Status, Destination, ETA, Draught, Cargo, Persons aboard Some of the functions cannot be altered without entering a password. There are two levels of passwords, a user password and an administrator password. The default passwords are “OP” and “SE”. TR-8000 Operator and Installation Manual 22 7.2.5 Indicating ICONS Receive data on either of the two AIS channels. If Inactive, shown as Transmit on either channel A or B shown as TxA or TxB. Icon shown is Inactive. Active is shown with Green color as the Rx icon above. Alarm Status: No alarms Alarm caused by one or more incidents from Table 3 Navigation Status: Under way using Engine At Anchor Not Under Command Restricted Manoeuvrability Constrained by her draught Moored Aground Fishing Sailing Transmission Modes : Silent Mode - Transmission is turned OFF Normal transmission mode (12.5W) Low Power (1 W) if Vessel type = “Tanker” and speed is below 3 knots and Navigation Status = “Moored” TR-8000 Operator and Installation Manual 23 7.2.6 Ship List The display unit receives data about all the ships with an active AIS transmitter in the area and presents this data in a list in the main window. The list displays the name or MMSI, range to own ship, bearing and age of presented data. When the graphical view is off, course and speed are also displayed. The list can be sorted on any of these criteria, but an AIS SART will always be presented at the top of the list. The columns “Name/MMSI”, “RNG”,”BRG” and “Age” are always present, but “SOG” and “COG” may be replaced by “CPA” and “TCPA” or added in addition (See paragraph 10.2.3 ) Example of all listed: TR-8000 Operator and Installation Manual 24 7.2.6.1 Column description Name/MMSI : Shows the MMSI (Maritime Mobile Service Identity) of the ship until its Name is received. Name is transmitted more seldom than MMSI numbers RNGNM: Is the Range to the Vessel in Nautical Miles (NM) BRG°: Bearing to the Vessel in degrees from your position SOGkn : Speed Over Ground in Knots COG°: Course Over Ground in degrees CPANM: Closest Point of Approach : An estimated point in which the distance between you and the other vessel are at its minimum value TCPAmin: Time To Closest Point of Approach : The time (in Minutes) until you reach the CPA Agemin: Shows how many minutes since last reception from this vessel TR-8000 Operator and Installation Manual 25 7.2.7 Graphical View The graphical display of the ship list plots the positions of other AIS targets relative to your own position in a frame on the left side. A vessel with neither a reported heading nor COG will be oriented toward the top of display area. The user is able to switch between North Up and Head Up, but if no heading or COG is available, or if the ship is anchored/moored, the North Up configuration will automatically be chosen. If a valid heading is received from external heading sensor (Gyro, Satellite compass or similar), own ship will be oriented according to this. If heading is lost, Course Over Ground (COG) will be second choice for own ships orientation on the display. The setup is done in the Display Settings menu. In this menu, it is also possible to toggle between Graphical and List view as default. In the display menu, the user can choose not to return to the graphical view when exiting menus. TR-8000 Operator and Installation Manual 26 Different types of targets are displayed with different icons. Active Vessel If the CPA/TCPA system is activated, ships on collision course are displayed with a red color and double thickness of the lines. Own ship is indicated in the same way as other ships, but is always in center. Sleeping target Smaller symbol than “Active Vessel” without a beam line Sleeping targets are defined based on either: Range more than X Nautical miles Class B Activation can be either of the definitions above and can be visible or not AIS base station AtoN An Aids to navigation buoy indicating that it is off position is indicated with a red color. AIS SART. Will be displayed with a red color. AIS TEST will be displayed with normal color. SAR Aircraft TR-8000 Operator and Installation Manual 27 7.3 Voyage Settings Red square shows button selected to get to this menu The Voyage Settings contains all the ship data to be entered or changed before or on each voyage. In order for the AIS system to function correctly, it is important to keep these parameters up to date. You may use one of these buttons: Navigational Status Destination ETA (Estimated Time of Arrival) Draught Cargo Category Persons Aboard to set correct information for the Voyage TR-8000 Operator and Installation Manual 28 7.3.1 Navigational Status The options available for the navigational status are as follows. Under way using engine, At anchor, Not under command 1, Restricted manoeuvrability 2, Constrained by her draught 3, Moored, Aground, Engaged in fishing 4 Under way sailing 5 Not Defined (Default) 6 Vessel not under command means a vessel which through some exceptional circumstance is unable to maneuver as required by these Rules and is therefore unable to keep out of the way of another vessel. Vessel restricted in her ability to manoeuver means a vessel which from the nature of her work is restricted in her ability to manouvre as required by these Rules and is therefore unable to keep out of the way of another vessel. The term “vessels restricted in their ability to manoeuvre” shall include but not be limited to: A vessel engaged in laying, servicing or picking up a navigation mark, submarine cable or pipeline; A vessel engaged in dredging, surveying or underwater operations; A vessel engaged in replenishment or transferring persons, provisions or cargo while underway; A vessel engaged in the launching or recovery of aircraft; A vessel engaged in mine clearance operations; A vessel engaged in a towing operation such as severely restricts the towing vessel and her tow in their ability to deviate from their course. Vessel constrained by her draught means a power-driven vessel which, because of her draught in relation to the available depth and width of navigable water, is severely restricted in her ability to deviate from the course she is following. Engaged in fishing means any vessel fishing with nets, lines, trawls or other fishing apparatus which restrict manoeuvrability, but does not include a vessel fishing with trolling lines or other fishing apparatus which do not restrict manoeuvrability. Under ways sailing means any vessel under sail provided that propelling machinery, if fitted, is not being used. Not Defined (Default) is used when TR-8000 is delivered from factory. Then none of above selections are made TR-8000 Operator and Installation Manual 29 7.3.2 Destination The destination of the voyage is to be entered here using a maximum of 20 characters. NOTE! Many countries require destination input is according to GUIDANCE ON THE USE OF THE UN/LOCODE IN THE DESTINATION FIELD IN AIS MESSAGES from IMO SN/Circ.244 Text from the Guidance: Recommended use of the UN/LOCODE 6. The recommended format is to indicate the port of departure at the first six positions of the data field followed by a separator and then the code for the next port of call. 7. In order to identify that it is a LOCODE, to separate the locations and to indicate the ‘from’ and ‘to’ ports, a ‘>’. symbol should be used as a separator. See example below. A ship is leaving Dubai bound for Rotterdam. Use of the UN/LOCODE would represent this voyage as below: “AE DXB>NL RTM” 8. If the next port of call is unknown, “?? ???” should be entered instead of the UN/LOCODE in the corresponding place in the data field. See example below: ”AE DXB>?? ???” 9. If the port of departure does not have a designated UN/LOCODE then “XX XXX” should be entered instead of the UN/LOCODE in the corresponding place in the data field. See example below: “XX XXX>US PBI” 10. If the next port of call does not have a designated UN/LOCODE the commonly accepted English name of the destination port should be entered, preceded by “===” (3 “equals signs”). If no such name is known, the locally used name should be entered. In this case, there may not be enough space available to indicate the port of departure. See example below: “===Orrviken” 11. If only the general area of destination is known the name or accepted abbreviation of the area preceded by “===” (“three equals signs”) should be entered. See example below: “NL RMT> === US WC” Indicating a destination on the United States West Coast. TR-8000 Operator and Installation Manual 30 7.3.3 ETA The Estimated Time of Arrival is displayed to other AIS units and should be updated if the expected arrival time is changed. 7.3.4 Persons Aboard (optional) This parameter indicates the number of persons aboard the ship at the given moment. This parameter is not sent to other ships or base stations, only through the Long Range Port which is normally not used (in 2011) 7.3.5 Cargo Category Identifies Hazardous cargo, depending on the ship class. See chapter 10.1.1.1for reference. TR-8000 Operator and Installation Manual 31 7.3.6 Draught The Draught parameter specifies the maximum depth of the ship in meters and decimeters. TR-8000 Operator and Installation Manual 32 7.4 Messages WARNING! Use of AIS text messages between ships must not be used to avoid collisions when time is critical. AIS systems are not required to have an audible alarm to indicate the arrival of all text messages. The use of AIS text messaging does not relieve the vessel of other requirements, such as the Vessel Bridge-to-Bridge Radiotelephone regulations or of the requirements to sound whistle signals and display lights or shapes in accordance with the International or Inland Navigation Rules. Usage During Emergencies - With respect to using AIS safety related text messages in emergency situations, users must be aware that they may not be received, recognized or acted upon as Global Maritime Distress Safety Systems (GMDSS) messages would be by the Coast Guard, other competent authorities or maritime first responders. Thus AIS must not be relied upon as the primary means for broadcasting distress or urgent communications, nor used in lieu of GMDSS such as Digital Selective Calling radios which are designed to process distress messaging. Nonetheless, AIS remains an effective means to augment GMDSS and provides the added benefit of being ‘seen’ (on radar or chart displays), in addition to being ‘heard’ (via text messaging) by other AIS users within VHF radio range (Ref: USCG Safety Alert 05-10). Red square shows button selected to get to this menu The messages Icon opens the 7.4.1 Received messages By pushing the buttons on the bottom bar, you can switch to: Sent messages Write New Reply Scroll up or down through received messages When you select one of the messages in the list, you will see the content in the right window If you press the button, the display will swap to: TR-8000 Operator and Installation Manual 33 7.4.2 Popup when received message Example showing “Popup” of received “Safety message” from AIS SART The message must be acknowledged by pressing “Close” button 7.4.3 Sent messages By pushing the buttons on the bottom bar, you can switch to: Received messages Write New Resend Scroll up or down through sent messages When you select one of the messages in the list, you will see the content in the right window There is also a “Status” field on each line showing: Message SENT OK Message transmission in PROGRESS Message transmission FAILED TR-8000 Operator and Installation Manual 34 7.4.4 Write New message Be advised, all messages in this context are SAFETY RELATED and should not be used for other purposes. For this reason, this functionality is protected by a user password. Default Password = OP Select here message recipients: From list (Of received ships) Enter MMSI (directly) Broadcast (to all) TR-8000 Operator and Installation Manual 35 7.4.4.1 Message recipients “From list” Select 1. Which ship 2. Confirm with Then a new window opens: 7.4.4.1.1 Write text When a target is selected, the keyboard window opens, and allows the user to write a message. The total allowed length is 156 characters. Confirm with Which opens the 7.4.4.1.2 Choose channels and SEND Select preference Send : TR-8000 Operator and Installation Manual 36 7.4.4.2 Message recipients “Enter MMSI” 1. 2. 3. 4. Enter MMSI Confirm with Write Text (as described above) Select Channel and Send (-“”-) 7.4.4.3 Message recipients “Broadcast” 1. Write Text (as described above) 2. Select Channel and Send TR-8000 Operator and Installation Manual 37 7.5 Display Settings Red square shows button selected to obtain to this menu In the Display settings menu, you can adjust Brightness level and switch between night and day mode. Each mode has its own brightnesslevel. In the low brightness end of the scale, the steps are more accurate to adapt to very low intensity levels. Touching the empty area at the left or right side of the display restores a 50% brightness level if the display gets too dark to see the actual buttons for this purpose. Restoring of 50% brightness level is also accessable by pressing the on/off button (see chapter 7.1) Press “Home” to return to Main Window again TR-8000 Operator and Installation Manual 38
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Page Count : 38 Creator : pdfsam-console (Ver. 2.4.0e) Producer : iText 2.1.7 by 1T3XT Modify Date : 2012:08:28 15:24:04+02:00 Create Date : 2012:08:28 15:24:04+02:00EXIF Metadata provided by EXIF.tools