Joysway Hobby J3C0001 2.4GHz Pistol Grip Radio Control System User Manual J3C91

Download:
Mirror Download [FCC.gov]
Document ID	1953004
Application ID	iblf3VES1i34Zn4ZbGW/lg==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	407.44kB (5092974 bits)
Date Submitted	2013-04-29 00:00:00
Date Available	2013-04-30 00:00:00
Creation Date	2013-04-15 17:42:59
Producing Software	Adobe PDF library 9.90
Document Lastmod	2013-04-15 17:42:59
Document Title	J3C91说明书-----
Document Creator	Adobe Illustrator CS5

CAUTION
To work your R/C with your models correctly and safely,read this manual carefully and keep it in a safe
way as a reference introduction in the future
Warning:
1.This product is only equipped for radio controlled models.
2.The usage of this product should be approved by local relevant law or regulations.
3.we will not be responsible for the damages caused by unauthorized modification, adjustment or
replacement of parts of this product.
4.The manual maybe altered without prior notice. Please contact us if you have any corrections or
clarifications that should be made in the manual.
Before starting the transmitter, make sure the transmitter batteries are well loaded. The voltage of
transmitter batteries is never lower than 4.5V. And please check and confirm that the servos are all
well and properly connected.
Keep the radio system away from moist, high temperature and strong shake. Do not clean the product
with solvent.
The antenna does not touch anything else when power switch is turned on. Do not leave this product
and its accessories within the reach of small children.
Please use this product according to your local relevant law or regulation, we are not responsible for
any incidents or damages.
2.4G Binding
The Binding processing
Turn on the transmitter, then connect the power of receiver, pressing the receiver “BIND” button till the
light turn on GREEN which means the binding is successful. After that, it’s unnecessary to bind again.
Caution:
make sure the RX and TX is within one meter, and around 10 meters no similar devices.
If the light flashing, showing the binding failure. Please do again as above indication.
Transmitter introduction
Throttle reverse switch
Throttle trim-brake
Throttle trim-forward
Throttle traveling value-brake
Throttle traveling value-forward
Power indicator
Steering reverse switch
Steering trim-right
Steering trim-left
Steering traveling angle-right
Steering traveling angle-left
Steering dual rates
Power switch
Steering wheel
Throttle Trigger
Battery Box
Steering Dual Rates Setup
Function
Using this function to adjust servo travel. The default is 100%, adjusting value range: 20%-120%
Setting
Rotate the “ST.D/R” knob to the left end point means
steering servo of value reach minimum value.
Rotate the “ST.D/R” knob to the right end point means
steering servo of value reach maximum value.
EPA Adjustment
Function
Use this when performing left and right steering angle adjustments, throttle high side/brake side
operation amount adjustment during linkage. End Point Adjustment (EPA)
adjusting value range: 0%-100%
Setting
1.Steering (right side) adjustment
Rotate “ST/R” knob to the left end point means minimum value 0%,
right end point means maximum value 100%.
2.Steering (left side) adjustment
Rotate “ST/L” knob to the left end point means minimum value 0%,
right end point means maximum value 100%.
3.Throttle (brake side) adjustment
Rotate “TH-BRK” knob to the left end point means minimum value 0%,
right end point means maximum value 100%.
4.Throttle (forward side) adjustment
Rotate “TH-FWD” knob to the left end point means minimum value 0%,
right end point means maximum value 100%.
CAUTION:
When adjusting this function, make sure the direction is in agreement
with the car or boat direction, you can adjust by the “REV-NOR” button.
Trim Adjustment
Transmitter Batteries Installation
The transmitter requires 4 “AA” batteries. Do not mix old and new cells. To install the batteries, slide
open the battery door on the bottom of the Transmitter. Install the batteries in the holder as shown in
the diagram (see marks molded inside the case). Make sure to note the proper polarities on each cell.
Close the battery door.
IMPORTANT: Do not operate an R/C model with weak batteries as it could result in reduced range
and/or possible loss of control !
Receiver Connection Diagram
BATT.(5V)
ESC
SERVO2(TH.)
SERVO1(ST.)
Technology Data
2405MHz-2450MHz
2405MHz-2450MHz
:4.8V-6V
100 J
180
6V
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
To assure continued compliance, any changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate this equipment. (Example- use
only shielded interface cables when connecting to computer or peripheral devices).
This equipment complies with Part 15 of FCC RF Rules. Operation is subject to the following two
conditions:
1) This device may not cause interference and
2) This device must accept any interference, including interference that may cause undesired
operation of the device.
Caution:
Any changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate this equipment.
EU Declaration of Conformity
Hereby, Joysway Hobby (HK) Limited, declares that this device is in compliance with the essential
requirements and other relevant provisions of Directive 1999/5/EC.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 5.0-c060 61.134777, 2010/02/12-17:32:00
Format                          : application/pdf
Title                           : J3C91说明书-----
Creator Tool                    : Adobe Illustrator CS5
Create Date                     : 2013:04:15 17:42:59+08:00
Modify Date                     : 2013:04:15 17:42:59+08:00
Metadata Date                   : 2013:04:15 17:42:59+08:00
Thumbnail Width                 : 256
Thumbnail Height                : 44
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 4957 bytes, use -b option to extract)
Document ID                     : xmp.did:3BCD3247B0A5E211AB3B88F8702BF2F4
Instance ID                     : uuid:15d698c2-e720-4baa-a7aa-53f694a86119
Original Document ID            : uuid:65CAB611989BE2118AACA383E147D0C9
Rendition Class                 : proof:pdf
Derived From Instance ID        : uuid:9e5b571f-6afa-413b-a720-af3881fb444f
Derived From Document ID        : xmp.did:3ACD3247B0A5E211AB3B88F8702BF2F4
Derived From Original Document ID: uuid:65CAB611989BE2118AACA383E147D0C9
Derived From Rendition Class    : proof:pdf
History Action                  : saved, saved, saved, saved
History Instance ID             : xmp.iid:B57DE73A2B9CE211B7CFB463338210B0, xmp.iid:39CD3247B0A5E211AB3B88F8702BF2F4, xmp.iid:3ACD3247B0A5E211AB3B88F8702BF2F4, xmp.iid:3BCD3247B0A5E211AB3B88F8702BF2F4
History When                    : 2013:04:03 14:53:46+08:00, 2013:04:15 17:38:50+08:00, 2013:04:15 17:39:45+08:00, 2013:04:15 17:42:55+08:00
History Software Agent          : Adobe Illustrator CS5, Adobe Illustrator CS5, Adobe Illustrator CS5, Adobe Illustrator CS5
History Changed                 : /, /, /, /
Startup Profile                 : Print
N Pages                         : 1
Has Visible Transparency        : True
Has Visible Overprint           : False
Max Page Size W                 : 148.500152
Max Page Size H                 : 209.999929
Max Page Size Unit              : Millimeters
Font Name                       : Arial-BoldMT, ArialMT
Font Family                     : Arial, Arial
Font Face                       : Bold, Regular
Font Type                       : Open Type, Open Type
Font Version                    : Version 3.00, Version 3.00
Font Composite                  : False, False
Font File Name                  : ARIALBD.TTF, ARIAL.TTF
Plate Names                     : Cyan, Magenta, Yellow, Black, PANTONE 877 C, PANTONE 1655 C
Swatch Groups Colorants Tint    : 100.000000
Swatch Groups Colorants Cyan    : 80.000001
Swatch Groups Colorants Magenta : 5.000001
Swatch Groups Colorants Yellow  : 10.000002
Swatch Groups Colorants Black   : 0.000000
Swatch Groups Group Name        : 灰度
Swatch Groups Group Type        : 1
Swatch Groups Colorants Swatch Name: K=5
Swatch Groups Colorants Mode    : GRAY
Swatch Groups Colorants Type    : PROCESS
Swatch Groups Colorants Gray    : 12
Producer                        : Adobe PDF library 9.90
Page Count                      : 6
Creator                         : Adobe Illustrator CS5

EXIF Metadata provided by EXIF.tools