Juniper Systems 19799AR BC04 User Manual

Juniper Systems, Inc. BC04

User Manual

ActiveSync, Excel, Hotmail, Internet Explorer, Microso, MSN, Outlook, PowerPoint, Visual Studio, Windows, Windows Media, Windows Mobile, Windows Mobile Device Center, Windows Vista, and the Windows logo are trademarks or registered trademarks of Microso Corporation in the United States and/or other countries. The Bluetooth® word mark is owned by the Bluetooth SIG, Inc. and any use of such marks by Juniper Systems, Inc. is under license. Acrobat and Reader are registered trademarks of Adobe Systems Incorporated in the United States and/or other countries. The names of actual companies and products mentioned herein may be the trademarks of their respective owners.© Copyright 09-2008 Juniper Systems, Inc. All rights reserved.P/N 20020-03 WARNING! Text set o in this manner indicates that failure to follow directions could result in serious injury.CAUTION: Text set o in this manner indicates that failure to follow directions could result in damage to equipment or loss of information.!!!!
Contents1 Getting StartedThe Anatomy of the Field PC 6Getting Started 72 Battery and PowerBattery Settings Screen 12Charging the Battery Pack 14USB/Power Dock 16Using Vehicle Power 183 Communicating with a Desktop ComputerCommunicating with a Desktop Computer 204 Using the HardwareUsing the Hardware 24Powering Off, Suspending, Resetting, and Restoring Factory Defaults 26Using the stylus 28Using the Touchscreen 29PC Card Installation 30Micro SD Card Installation 305 Programs and SettingsUnderstanding the Today Screen 34Entering Information 35Recognizing Status Icons 37Recognizing Soft Keys 38Performing Common tasks on the Field PC 40Contents iii
iv Field PC Owner’s ManualUsing On-Device Help 43Backing Up Data 44Connecting to a Desktop Computer 48Information for Software Developers 486 Bluetooth® Wireless CommunicationsBluetooth® Drivers and Profiles 50Supported Bluetooth® Profiles 567 Wi-Fi ConnectionsWi-Fi Connections 648 Care and MaintenanceCaring for Your Field PC 68Disposing of the Field PC and Battery Pack 739 Service InformationRepairing the Field PC 76Preparing for a Service Center Call 76A Product Specifications and WarningsProduct Specifications 78Battery Warnings 79Equipment Warnings 80B Certifications and Regulatory InformationRegulatory Information 82Limited Product Warranty 85 Index
1Getting Started 6  The Anatomy of the Field PC 7  Getting Started
6 Field PC Owner’s ManualThe Field PC is a rugged handheld computer designed for data collection from multiple environments. Equipped with Windows Mobile 6 it features a wide variety of applications soware and accessories.The Anatomy of the Field PCThe picture below shows some of the important features of the Field PC.812345791011CAUTION: Tampering with the jack screws will break the waterproof seal of the unit.!!6USB client (mini B)Touchscreen/displayTop lanyard cleatsBattery door latchesPower buttonBottom lanyard cleats78910USB host (full size A)12V DC jackStylus9-pin serial port12345611Back compartment door
Getting StartedInstall the Battery PackWhen you receive the Field PC, you must install and charge the NiMH baery pack before using. To do this, complete the following steps:1. Push up on the sliding latches on the sides of the Field PC to open the baery compartment door.2. Place the NiMH baery pack in the le side of the baery compartment, push down, and slide it all the way to the right. There is a small arrow on the boom right corner of the baery pack, make sure the arrow is pointing to the right when it is placed in the Field PC. Ch 1  Getting Started 7
8 Field PC Owner’s Manual3. Push the baery door closed until the slide latches click into place. If the latches are not securely in place the unit is no longer water tight. Note: Do not turn on the Field PC yet.4. Plug the AC wall charger that came with the Field PC into the wall socket.5. Remove the rubber protector from the Field PC’s external power input jack.
6. Plug the wall charger into the Field PC power jack located at the top of the case. The Charge Seings screen opens requesting you set the charge percentage. Select Enter percentage and capacity, set the baery charge to 10%, and leave the baery capacity at 4000. 7. Charge the baery pack at room temperature for at least 6 hours.Ch 1  Getting Started 9
10 Field PC Owner’s Manual
2Battery and Power 12  Battery Settings Screen 14  Charging the Battery Pack 16  USB/Power Dock 18  Using Vehicle Power
12 Field PC Owner’s ManualThis chapter teaches you about the rechargeable NiMH baery pack. It typically lasts 12 to 20 hours, and charges in 4–6 hours using a wall charger, vehicle charger (optional), or USB/PowerDock (optional).Battery Settings ScreenUnderstanding the Battery Settings ScreenThe baery charge percentage of the Field PC must be conrmed or manually set using the Baery Seings Screen. This screen appears whenever:The baery pack is removed and (re)installed.The “Power O” option is selected from the “Power Buon” menu (which appears aer holding the Power Buon for 8 seconds) and then the Field PC is powered back on.A Hard Reset is performed (by holding down the Power Buon for 10 seconds).A Clean Boot (Set to Factory Defaults) is performed.The charge of the baery pack is fully drained while in the Field PC, and the unit is then plugged into an AC wall charger or USB/Power Dock and turns on.Note: To access the Charge Seings screen, you can either tap the baery icon or go to Start > Seings > System tab > Power > Charge Seings tab.
Battery Settings OptionsThe New Baery Detected screen has four choices:Same baery, use last valuesFull baeryCharge unknownEnter percentage and capacityUse Same Baery if the Field PC was turned o and back on or if the baery was taken out and re-inserted without being recharged, this option uses the information the unit already has for the baery seing.Use Full Baery if the baery is fully charged.Use Charge Unknown if you do not know the charge of the baery.Note: The baery gauging will not be accurate with Charge Unknown until the baery is fully charged. The baery icon may not display the percentage of charge correctly.Use Enter percentage and capacity if you know the charge or if it is a new baery pack.Ch 2  Battery and Power 13
14 Field PC Owner’s ManualEnter the correct percentage if it is known and click Ok. If it is a new baery pack complete the following steps:1. Set the Percentage to 10 and leave the Baery Capacity at 4000. Note: The factory baery is 4000 mAh and so the default for the Capacity box is 4000. To learn more about this seing read the Baery Capacity section.2. Tap on Ok to save the seings and to close the screen.3. Plug unit into AC charger to charge the new baery. Once the baery pack is fully charged, the gauging is automatically set to 100%. Battery CapacityThe capacity is the amount of energy a fully charged baery can supply in milliamp-hours (mAh). The baery capacity of the factory Field PC baery pack is 4000 so the default seing for the baery capacity is 4000. If you are using a dierent baery pack, check its mAh rating commonly listed on the baery label. For optimum performance, use baery packs with a 3000 to 4000 mAh capacity. The higher the capacity the longer the charge is held. Note: As a baery pack ages, operation time is reduced. The capacity seing for an older baery pack can be adjusted downward to reduce charging time and to more accurately represent the baery capacity.Charging the Battery PackRecharging the NiMH Battery PackWe recommend charging the Field PC baery pack when it is not in use. The Field PC prevents the baery pack from being overcharged if le plugged into the wall charger.
Temperature Ranges for Charging the NiMH Battery PackThe Field PC NiMH baery pack is charged most eciently at temperatures ranging between 10° to 20° C (50° to 68° F) when the AC power adapter is used. The Field PC baery pack does not charge outside of the range 0° to 40° C (32° to 104° F).Using the Alkaline Battery Holder (optional accessory)To properly use the alkaline baery holder, complete the following steps: 1. Open the alkaline baery holder by pressing the tabs simultaneously on either side and pulling.2. Insert three unused AA alkaline baeries by following the + and – signs respectively. Note: It is important that only alkaline baeries are used. We recommend using non-rechargeable high quality alkaline baeries such as Duracell® Ultra or Energizer® Lithium.3. Close the alkaline baery holder by sliding the door in place and press down to snap it securely shut.Ch 2  Battery and Power 15
16 Field PC Owner’s Manual4. Follow the directions for changing a baery pack to install the alkaline baery holder. However, the charge seings screen will not pop up.The alkaline baery holder is to be used as an emergency, secondary source of power, not as the primary source. The baeries do not last as long as the standard baery pack and have a lower performance rate. The display heater cannot be enabled and the backlight is disabled when the baery power level is low. Please recycle used alkaline baeries in a responsible way.USB/Power DockThe USB/Power Dock charges the Field PC, and allows you to transfer and synchronize les between the Field PC and a desktop computer. The Power Dock is ordered separately. Listed below are the functions of the three LED indicators on the Power Dock:Function LED ColorPower Supply GreenCharging AmberUSB Communication Red
Power SupplyThe Power Dock uses the AC wall adapter that comes with the Field PC. Plug the Field PC power adapter into the dock, in the back on the right, and then into the wall. When the green LED indicator turns on, the Power Dock has power.ChargingThe Power Dock charges the Field PC. Place the Field PC into the Power Dock and the Field PC automatically turns on and begins charging, the amber LED is on. When the amber LED turns o, the Field PC is nished charging. The charging time is the same whether the Field PC is turned on or o.Note: Never operate the Field PC in the USB/Power Dock without a baery installed. The dock does not supply adequate power to the Field PC for normal operation. Do not use the Power Dock with alkaline baeries installed.USB Client (USB-B) 12V DC jackUSB Client (USB-B) 12V DC jackCh 2  Battery and Power 17
18 Field PC Owner’s ManualUSB CommunicationThe Power Dock also provides a USB connection from the Field PC to the desktop computer. The red LED indicator turns on when the USB connection between the Field PC and desktop computer is active.Using Vehicle PowerVehicle Mode should be used when the Field PC is connected to a vehicle power supply. By using Vehicle Mode the baery does not charge if the charge level is above 90%. This restriction makes sure the baery is not overcharged.To turn Vehicle Mode on (default is o), complete the following steps:1. Tap Start > Seings > System tab > Power > Charge Seings tab.2. Select In-Vehicle Charge Mode check box.3. Tap ok.WARNING: If Vehicle Mode is not used when charging in a vehicle, the baery may be overcharged resulting in permanent damage to the baery.!!
3Communicating with a Desktop Computer 20  Communicating with a Desktop Computer
20 Field PC Owner’s ManualThe Field PC can connect to a desktop computer using either ActiveSync® (for computers with Windows® 2000 and Windows® XP), or Windows Mobile® Device Center (for computers with Windows Vista™).Communicating with a Desktop ComputerInstall ActiveSync® on a Desktop Computer (Windows® 2000 and Windows® XP)Note: If you have Windows Vista™, see Install Windows Mobile Device® Center.Insert the Geing Started Disc into your desktop computer. A window appears on the display.Select your language. Follow the directions on the screen to install Windows® ActiveSync® 4.5.Note: Install ActiveSync® before aaching the USB cable to the desktop or Field PC.Creating an ActiveSync® Connection1. Plug USB Client end (mini B) of the USB communications cable into your Field PC.2. Plug the USB Host end (full size A) of the USB communications cable into your desktop computer.3. Establish an ActiveSync® partnership by following the instructions on the desktop computer screen.
Install Windows Mobile® Device Center on a Desktop Computer (Windows Vista™)To install the Windows Mobile® Device Center on a desktop computer with Windows Vista™ complete the following steps:1. Connect your device to your desktop computer.2. Download the Windows Mobile® Device Center Installer to your computer by clicking on the download link that appears in the pop-up window.3. Select “Run this program from its current location” and click OK.4. Follow the instructions on the screen.Creating Windows Mobile® Device Center ConnectionOnce Windows Mobile® Device Center has been installed, create a connection at any time by plugging one end of a USB cable into the computer and the other end into the Field PC. Windows Mobile® Device Center automatically opens. Follow the steps on the screen.Note: For more information about connecting to a computer using either ActiveSync® or Windows Mobile® Device center visit the Microso Windows Mobile® website.Ch 3  Communicating with a Desktop Computer 21
22 Field PC Owner’s Manual
4Using the Hardware 24  Using the Hardware 26  Powering Off, Suspending, Resetting, and Restoring Factory Defaults 28  Using the Stylus 29  Using the Touchscreen 30  PC Card Installation 30  Micro SD Card Installation
24 Field PC Owner’s ManualThis chapter discusses the hardware components of the Field PC. Specically, you will learn about: Keyboard functionsSuspending, powering o, and reseing the deviceUsing the stylusUsing the touchscreenUsing the PC card slotUsing the Micro SD card slotUsing the HardwareKeyboard FeaturesPictured below is a diagram of the Field PC keyboard. 12 3 45 76 891011121314HomeLeft soft keyMenuRight soft keyOKBacklightContrast/Brightness dimContrast/Brightness brightOrange shift keyBlue shift keyTasks managerTouchscreen enable/disableWindows start menuPower1234567891011121314
Some keys have standard functions as well as special functions accessed with the ORANGE and BLUE shi keys.Five keys are located below the display. These keys act as standard Windows Mobile keys unless the application program uses them as function keys. With the use of the ORANGE and BLUE shi keys, twelve function keys and three special function keys are available.Function Keys and Key SequencesThe Windows Mobile functions are the standard key outputs. These include the Home key, the Menu key, and the Tasks Manager key. The standard key outputs are functional unless an ORANGE or BLUE shi key is pressed. Shift Key Usage Note: Follow the same steps with the ORANGE shi key to access the orange printed keyboard characters.To access a single blue printed keyboard characters:Press and release the BLUE shi key followed by the key with the desired blue-leered character. To activate several blue-leered keys before returning to standard mode:Press and hold the BLUE shi key down while you press all the desired BLUE keys. Once the BLUE shi key is released, the keyboard reverts back to the standard mode. Communication PortsThe Field PC has the following communication ports located at the top of the case:9 pin serial portUSB A (host) portUSB B mini (client) portCh 4  Using the Hardware 25
26 Field PC Owner’s ManualConnector ProtectorsThe Field PC is sealed without the protectors, however the rubber connector protectors keep dirt and moisture out of the ports. Powering Off, Suspending, Resetting, and Restoring Factory DefaultsThe Power buon allows you to suspend, power o, or reset the device. A series of keyboard actions also lets you restore seings, and icons to their original factory defaults. Below are instructions for each action. Powering Off the DeviceWhen the device is powered o, it closes all programs and powers down all system components except for the real-time clock. Unlike suspend mode, the device resets when it is powered on again. Any unsaved data will be lost. To preserve baery power, we recommend you power o the device if it will be le unused for two weeks or longer.To power o the Field PC,1. Save all open les and close any running programs.2. Press and hold the Power buon until the Power Buon menu appears. Note: The Field PC cannot be powered o while it is plugged into the wall charger.
3. Tap Power O. A warning dialog appears. Tap OK. To power on your Field PC, hold down the Power buon until you see the screen light up. Note: The Baery Seings screen will appear when you power on your Field PC.Suspending the DeviceSuspending the Field PC is dierent from powering it o. When the device is suspended it goes to sleep, and when it is turned back on, the device resumes where it was before it was suspended. Some baery power is used during suspend. We recommend suspending your device if you plan to turn it o for less than two weeks as long as the Field PC is aached to wall charger every night and weekend.To suspend your device, press the Power buon briey and release. To resume the device from suspend mode, press the Power buon again. Resetting the DeviceFollow the steps below to reset the Field PC: 1. Save your open les and close any running programs. 2. Press and hold the Power buon until the Power Buon menu appears.3. Choose Reset. If your device locks up, you can reset the device by pressing the Power buon for 10 seconds or until the screen goes dark. Aer a few seconds, the device turns on again.Ch 4  Using the Hardware 27
28 Field PC Owner’s ManualRestoring the Device to its Factory StateFollow the steps below to restore user storage, seings, and icons on your Field PC to their original factory defaults.CAUTION: Restoring the Field PC to its original factory state permanently erases data saved on the Field PC, any soware you installed, and any changes you made to the Field PC (including seings changes).To perform a clean boot, which restores everything but the “storage” folder, select Reset from the Power Buon menu and immediately press and hold Ctrl + Alt + Del.To perform a storage clean, which cleans the “storage” folder, select Reset from the Power Buon menu and immediately press and hold down Ctrl + Alt + 2.Perform both a clean boot and a storage clean for a complete reset of factory seings.Using the stylusBelow are instructions for tasks using the stylus.To do this . . . Follow these stepsSelect an item Tap once.Open an item or le Tap the item or le twice.Open a context menu for an itemTap and hold the item. The context menu appears.Cut or copy Tap and hold until the context menu appears. Select Cut or Copy.Paste Tap and hold the area where you want to paste. Select Paste from the context menu that appears.Drag and drop Tap and drag the item to the destination. Li up the stylus.Select multiple items Drag the stylus over the items.!!
Using the TouchscreenThis section explains how to protect, calibrate, and disable the touchscreen.Protecting the TouchscreenThe touchscreen is sealed to protect your device against water and dust. To protect your touchscreen, we recommend that you apply a touchscreen protector. Calibrating the TouchscreenIf the touchscreen is not responding accurately to stylus taps, try calibrating the touchscreen manually using the following steps: 1. Tap Start > Seings > System tab.2. Scroll down and tap on the Screen icon. 3. When the Screen window appears, tap Align Screen. 4. Follow the directions to calibrate the touchscreen.5. Aer you calibrate the touchscreen, the Screen window appears again. Tap OK to exit the screen.Disabling the TouchscreenTo disable or enable the touchscreen, press the BLUE shi key then the TS key. Ch 4  Using the Hardware 29
30 Field PC Owner’s ManualPC Card InstallationA PC card can be used to expand the memory and peripheral capabilities of the Field PC. The PC card slot is also capable of taking an SD or CF card with an adapter. To install a card complete the following steps:1. Use a screwdriver to open the back compartment door.2. Insert the card socket-rst with the front of the card facing up. Gently push it in until it stops.3. Close the door to the card slot and reaach the back compartment door.Note: Be careful when inserting and removing cards. Excess force could damage the card and the card drive. To remove a card from the slot push the eject buon, grasp the card rmly and pull it out. Micro SD Card InstallationA Micro SD card holder is located at the back of the unit. Installing a card improperly can result in damage to the unit not covered by the warranty. To properly install a Micro SD card complete the following steps:1. Use a screwdriver to open the back compartment door.2. Gently li the ap located in the top right corner of the board protector.
3. Slide Micro SD card door to the right to open.4. Slide Micro SD card into the door with the connectors facing down and outward.CAUTION: Do not place Micro SD card directly into board connector or the card reader and the card may be damaged. 5. Gently shut door and slide it to the le to lock it in place.6. Close ap in board protector and securely reaach the back compartment door.!!Ch 4  Using the Hardware 31
32 Field PC Owner’s Manual
5Programs and Settings 34  Understanding the Today screen 35  Entering Information 37  Recognizing Status Icons 38  Recognizing Soft Keys 40  Performing Common Tasks on the Field PC 43  Using On-Device Help 44  Backing up Data 48  Connecting to a Desktop Computer 48  Information for Software Developers
34 Field PC Owner’s ManualThe Field PC uses the Windows Mobile® 6 operating system. This chapter explains how to use Windows Mobile® 6.Understanding the Today ScreenThe Today screen is the default screen you see when your device powers on. From the Today screen you can view or selectToday’s dateOwner informationMessagesTasksUpcoming appointmentsThe Today screen also allows you to lock or unlock your device. Locking the device disables your screen for easy cleaning. To lock the device, simply tap on the words “Device unlocked.” To unlock the device, tap on the word “Unlock” on the two screens that appear.
Using the Start MenuThe Start menu is the main access point to all programs in Windows Mobile®. It allows you to access les, programs, or system seings. To access the Start menu, tap the Start menu icon in the top le corner of your screen or press the Start menu buon on the keypad. The Start menu appears giving you links to programs, seings, and menus.Entering InformationAt the boom of the display, is a data entry icon. Tapping on the icon allows you to enter information using the stylus. Specically, you can choose to: Select alphanumeric characters from the on-screen Keyboard utility (the default input method). Use Leer Recognizer. This input method recognizes character strokes and gestures. Ch 5  Programs and Settings 35
36 Field PC Owner’s Manual Enter text using Block Recognizer. This utility recognizes leers from single strokes. Use Transcriber, a program that allows you to enter data using cursive, print, or mixed handwriting.Note: For more details about using each input method, go to Start > Seings > Input and choose the input method from the Input window.When you are ready to enter text, you can switch from the default input method (keyboard) by following these steps: 1. On the boom center of the screen, tap the arrow next to the input method icon (shown). If the input selector arrow is not displayed, tap the input method icon. 2. The input method menu appears. Tap the input method you want from the list of options.3. Using the selected input method, enter your text.
Recognizing Status IconsStatus icons show the status of operations on the Field PC. Status icons and their functions are listed in the following chart.  Icon  Name  Function    Charge indicator Tells you when the device is charging.    Speaker Tap to control volume.    Baery capacity Tap to see charge seings screen.    Touchscreen disabled Touchscreen is disabledFor an additional list of icons and their functions, follow these steps: 1. Tap Start > Help. 2. Select Contents located in the lower le corner. 3. Tap on Overview of the Today screen > What do those status icons indicate? Ch 5  Programs and Settings 37
38 Field PC Owner’s ManualRecognizing Soft Keys These context-sensitive keys appear as words, buons, or tabs on the menu bar. Tap on these keys to perform actions or open menus. Here you see so keys on the Today screen. Dimming or Turning Off the BacklightDimming or turning o the display backlight saves baery power when the device is running on a baery pack. To dim or turn o the backlight, follow these steps: 1.  Tap Start > Seings > System tab > Brightness. 2.  Select the Baery Power tab if it is not already selected. The Brightness window for baery power appears.3. Adjust the backlight by moving the slider up or down.
Adjusting the Backlight TimerBy default, the display backlight is set to turn o aer one minute of inactivity. To adjust the time when your backlight turns o, follow these steps:1. Tap Start > Seings > System tab > Backlight. The Backlight window appears. To change the timer for external power, tap the External Power tab.2.  Select or deselect the two options.3. If you selected the rst checkbox, choose the length of time before the backlight turns o.Adjusting the Contrast and BrightnessThe mono screen on the Field PC unit has the option to control the contrast. The color screen on the Field PC has the option to control the brightness. Press the ORANGE shi key and then the F4 to dim, or F5 to brighten, the contrast or brightness.Ch 5  Programs and Settings 39
40 Field PC Owner’s ManualPerforming Common tasks on the Field PCCreating a Name for the Field PCWe recommend creating a name for the Field PC so external devices like desktop computers or devices that use Bluetooth® wireless technology can dierentiate between devices. The Field PC is shipped with a name “FieldPCxxxxxxx” with xxxxxxx being the serial number.To create a dierent name, follow these steps:1. Tap Start > Seings > Systems tab.2. Tap About. 3. Select the Device ID tab at the boom of the screen.4. Type in a new device name.
Exploring FilesTo explore les stored on the Field PC, follow these steps:1. Tap Start > Programs > File Explorer. The File Explorer window appears. 2. If the drive you want does not already appear, tap on the drop-down menu in the top le to select it.3. Navigate the le directory by tapping on the folders and les you want. If you want to go up a level, tap on the Up so key at the boom of the screen.4. Use the Menu so key at the boom of the screen to manipulate les. Ch 5  Programs and Settings 41
42 Field PC Owner’s ManualApplications and Task ManagerClose Running Programs The Task Manager can be used to close unused programs to free memory on the device. We recommend closing any programs you are not using. Note: Tapping on the in the top right corner of a program only minimizes the program; the program continues to run in the background. To close one or more running programs, follow these steps:1. Go to Start > Programs > Task Manager.2. Select the program(s) you want to close.3. Tap End Task. Switching Between Running ProgramsTo switch between programs running on your Field PC, follow these steps while within the applications manager:1. Select the program you want to switch to.2. Tap the Menu so key and then Switch To. The program comes to the forefront.Viewing Memory Allocation for ProgramsTo see how much memory is available for programs and storage on the Field PC, go to the applications manager by either clicking the icon at the top or pressing the shortcut key. Tap the Main tab.
Available memory for storage and programs screen appears.Using On-Device HelpYou can access electronic help les on your Field PC from each screen. Windows Mobile® provides help information that is context-sensitive; the help information that appears on the help screen is directly related to what you are doing on the device.To access help les, follow these steps:1. Tap Start > Help.2. Select an option from the help menu that appears. Note: If the topic you want is not listed, try one of these options:Option 1: Choose Contents at the boom of the screen. A table of contents appears. Tap on the item you want. Option 2: Choose Search at the boom of the screen. Search allows you to search for specic topics within boundaries you set.Option 3: If you want help about a certain program on your mobile device, open the program rst, then tap Start > Help. The help menu items that appear are directly related to the application program.Note: If you need more assistance than a help le provides, visit the Microso website at www.microso.com/mobile.Ch 5  Programs and Settings 43
44 Field PC Owner’s ManualBacking Up Data Your Field PC is designed to protect your data. However, it is still a good idea to back up your data regularly by saving information to a desktop computer or to a micro SD or PC card.Backing Up to a Desktop ComputerTo copy les from your Field PC to a desktop computer, follow these steps:Using ActiveSync® (Windows® 2000 and Windows® XP)1. Re-establish an ActiveSync® connection. 2. In the ActiveSync window on your desktop computer, click Tools > Explore Pocket PC.3. A new window opens, showing the le directory for the Field PC.
4. Select the les on the Field PC you want to copy.5. Copy the les by choosing Edit > Copy or by right-clicking and choosing Copy.6. Paste the les onto the desktop computer.Using Windows Mobile® Device Center (Windows Vista™)1. If you have Windows Vista™, re-establish a Windows Mobile® Device Center connection. 2. In the window on your desktop computer, click File Management.3. A new window opens, showing the le directory for the Field PC. Ch 5  Programs and Settings 45
46 Field PC Owner’s Manual4. Select the les on the Field PC you want to copy.5. Copy the les by choosing Edit > Copy or by right-clicking and choosing Copy.6. Paste the les onto the desktop computer.Copying DataTo copy data from one directory to another (this includes to and from cards), follow these steps: 1. Select Start > Programs > File Explorer.2. The drop-down menu in the top le is a list of le directories. Choose the directory where the les you want to copy are located.
3. Highlight the les you want to copy and tap on Menu in the lower right. 4. Tap the stylus on the Edit option.5.  Choose Copy from the sub menu.6. Select the le directory you wish to copy to. 7. To paste, tap the Menu so key and choose Edit > Paste. 8. The les are now in both directories.Ch 5  Programs and Settings 47
48 Field PC Owner’s ManualConnecting to a Desktop ComputerRe-establishing an ActiveSync® ConnectionTo re-establish an ActiveSync® connection, follow these steps:Note: You can charge the unit while connected.1. Plug USB client end (mini B) of the USB communications cable into your Field PC.2. Plug the USB host end (full size A) into your desktop computer. ActiveSync® automatically establishes a connection between the Field PC and the desktop computer.3.  Follow the instructions on the desktop computer screen.Note: Microso ActiveSync® version 4.5 or later is required to connect to the Field PC.Re-establishing Windows Mobile® Device Center ConnectionComplete the following steps to reestablish a Windows Mobile® Device Center connection.1. Plug the USB host (full sized A) into available port on the desktop computer.2. Plug the other end, USB client (mini B) into the Field PC. Windows Mobile Device® Center will automatically open. 3. Follow the steps on the screen.Information for Software DevelopersInformation for soware developers and programers can be found at the Microso website. Information specic to the Field PC can be located at the website www.junipersys.com.
6Bluetooth® Wireless Communications 50  Bluetooth® Drivers and Profiles 56  Supported Bluetooth® Profiles
50 Field PC Owner’s ManualThis chapter explains dierent Bluetooth drivers and proles and how to create partnerships. Not every Field PC has an integrated Bluetooth radio. Bluetooth® Drivers and ProfilesMicroso® Bluetooth drivers are loaded onto your Field PC at the factory. These drivers support the following proles: serial port, le transfer, audio/visual control, dial up networking, object push, human interface device, and advanced audio distribution.Identify the Power Status of Bluetooth using Wireless ManagerBy default, Bluetooth is turned o. If you turn Bluetooth on and then suspend the device, Bluetooth turns o while the Field PC is suspended to save baery power. When you resume (turn on) the Field PC, Bluetooth turns on automatically. To determine the power status of the Bluetooth tap Start > Seings > Connections tab > Bluetooth > Mode tab.Make the Field PC Discoverable to another DeviceTo allow other devices that use Bluetooth wireless technology to detect the Field PC and communicate with it, you must make your device discoverable or establish a partnership with the other device.
Follow these steps to make your device discoverable:1. Tap Start > Seings > Connections tab.2. Tap Bluetooth.3. Select the Turn on Bluetooth checkbox, and then select the checkbox to Make this device discoverable to other devices.Create a Bluetooth PartnershipA partnership is created between the Field PC and another device that uses Bluetooth wireless technology to help exchange information securely. Follow the steps below to create a partnership: 1. Make sure the two devices are turned on, discoverable, and within at least 30 feet of one another.2. Tap Start > Seings and then tap the Connections tab.3. Tap Bluetooth > Devices tab > Add New Device. Your device searches for other devices with Bluetooth capabilities and displays them in the list.Ch 6  Bluetooth Wireless Communications 51
52 Field PC Owner’s Manual4. The name of the Bluetooth device appears. Tap the name, then tap Next.5. If the Bluetooth device has an assigned passkey, enter the number. If the device has not already been assigned a passkey but requires one, enter an alphanumeric passkey on the Field PC between 1 and 16 characters. Tap Next. Note: If you are unsure whether your device requires a passkey and whether one has already been assigned to your Bluetooth device, see the user documentation that came with the Bluetooth device. Important: If the Bluetooth device does not use a passkey, leave the passkey blank and tap Next. A message appears, asking if you want to add the device to the device list. Choose No and skip to step 7. Note: It is important to choose No when you are asked whether you want to add to the device to the device list; choosing Yes sends you back to the passkey screen.
6. Enter the same passkey on the Bluetooth device if required. 7. In the Partnership Seings screen on the Field PC, you can assign a new name to the Bluetooth device in the Display Name option.8. Select the service you want to use from the Services box, then tap Finish.Bluetooth Virtual COM PortsSome application programs connect using a virtual COM port (serial port) when making a Bluetooth connection. To make a connection possible for such programs, you must rst set up a virtual COM port on the Field PC. Once created, this virtual port can be used like any other COM port. For example, you can use a virtual COM port for programs that connect to a GPS receiver. When seing up a virtual COM port, you must specify if the COM port is an outgoing COM port or an incoming COM port. An outgoing COM port means that the Field PC initiates communication with the other device. For example, when you are using a Bluetooth GPS receiver, the Field PC initiates the request for data; thus, the virtual COM port connecting with the receiver would be an outgoing COM port. An incoming COM port means that the other device is initiating the communication with the Field PC. For example, a desktop computer might initiate a Bluetooth ActiveSync connection with the device via the virtual COM port.For more details about seing up outgoing and incoming COM Ports, read the following sections. Ch 6  Bluetooth Wireless Communications 53
54 Field PC Owner’s ManualSet up an Outgoing Bluetooth COM PortUse this option if you want to assign the virtual COM port as an Outgoing COM port (i.e., you want to use the Field PC to initiate communications with another device). Follow the steps below to set up an outgoing Bluetooth COM port. 1. Make sure you have paired with the serial port device you want to communicate with. To do this, follow the steps in the section called Create a Bluetooth partnership in this chapter. 2. Select the COM Ports tab. 3. Tap New Outgoing Port, the second option shown. 4. The Add a Device screen appears. Tap on the name of the device you want to set up as an outgoing port.
5. Select a numbered COM port from the list of ports that appear. If the port cannot be created, it is in use. Select a dierent numbered port.6. Important: Deselect the Secure Connection option below the list of COM ports, as shown above. Deselecting this option ensures that the device disconnects its Bluetooth connection only when you tell it to, and prevents the device setup from being deleted aer one connection.7. Tap Finish.Once the virtual COM port is assigned using the outgoing Bluetooth COM port, specify the COM port assignment within your application as explained in the user documentation for the application. An example follows.Suppose you are using a Bluetooth-enabled GPS receiver with the device and a navigation program on the Field PC. In this example, assume you have set up a virtual COM port between the Field PC and the GPS receiver and that you assigned the outgoing COM port as COM 6. To assign the COM port in your navigation program, you would then follow these steps:1. Locate the place in the navigation program where the COM port is chosen.2. Select COM Port 6 as the COM port for the Bluetooth GPS receiver.Ch 6  Bluetooth Wireless Communications 55
56 Field PC Owner’s ManualSet up an Incoming Bluetooth COM PortUse this option if you want to assign the virtual COM port as an Incoming COM port (i.e., you want another device to initiate communications with the Field PC). If you are connected with a Bluetooth device that supports serial communications, follow these steps to set up the incoming Bluetooth COM port:1.  Press the COM Ports tab.2. Tap on New Incoming Port. 3. Select a numbered COM port from the list. Note: If the port cannot be created, it is in use. Select a dierent numbered port.4. Important: Deselect (clear) the Secure Connection checkbox. Deselecting this option ensures that the device disconnects its Bluetooth connection only when you tell it to, and prevents the device setup from being deleted aer one connection.Supported Bluetooth® ProfilesThis section describes the Bluetooth® proles recognized by the Microso drivers installed on your Field PC. Drivers determine which devices your Field PC can communicate with. Note: Bluetooth cards are not recognized by Field PCs with integrated Bluetooth.This section is organized by Bluetooth prole, each of which is briey described below. Instructions for using each prole to create Bluetooth partnerships follow.Serial Port Prole (SPP). Similar to a serial cable, this prole acts as a liaison between two devices, such as the Field PC and a GPS receiver, using virtual ports. (These ports are described in the previous section.) 
Dial-Up Networking (DUN). This prole lets you connect to a computer through a cell phone or a Bluetooth-enabled modem.Human Interface Device (HID). This prole allows you to communicate between the Field PC and a Bluetooth keyboard or mouse. Object Push Prole (OPP). This prole lets you exchange les like data, audio, business cards, appointments, and contacts. Similar to the well-known object exchange prole (OBEX).Advanced Audio Distribution (A2DP). This prole allows output for high delity stereo audio to Bluetooth enabled headphones, as well as microphone audio back to handheld.File Transfer Prole (FTP). This prole lets you transfer les between handheld computers and/or desktop computers.Audio/Video Control. This prole is the control for the audio player, such as start, stop, play previous, play next, and volume.Serial Port Profile (SPP)This section explains how to:Communicate with another device using the Serial Port ProleCongure ActiveSync® to synchronize through the Serial Port ProleConnect to a desktop computer that has a Bluetooth donglePrint from the Field PC to a Bluetooth printer using the Serial Port ProleCommunicating with Another Device using the Serial Port ProfileFollow the instructions below to communicate with a device using the Serial Port Prole.1. On the Field PC, tap on the Wireless Manager icon to make sure Bluetooth is on and that the Field PC is discoverable. 2. In the Wireless Manager, tap Menu > Bluetooth Seings > Device tab > New partnership. Ch 6  Bluetooth Wireless Communications 57
58 Field PC Owner’s Manual3. Select your target device and tap Next to create a Bluetooth partnership with the target device. Note: Aer you have created a partnership with a device, the device automatically appears in the list of Bluetooth devices. You do not have to re-create a device partnership.4. Enter the passkey on the Field PC and on the device. (See the documentation for the device for details. If there is no passkey listed for the device, tap Next, then No.)5. On the Field PC, select Serial Port and tap Finish.6. The device appears on the list of partnerships.7. Choose the COM Ports tab. Choose New Outgoing Port and tap Next. Select a COM port that is available. 8. Important: Deselect (clear) the Secure Connection checkbox. Deselecting this option ensures that the device disconnects the Bluetooth connection only when you tell it to.9. Tap Finish to save the seings. Tap OK and Done to close the Wireless Manager application.Connecting to a Desktop Computer using a Bluetooth Dongle1. Make the Field PC discoverable.2. Select the COM Ports tab.3. Choose New Outgoing Port.4. Select the device and tap Next.5. Select an available COM Port.6. Important: Deselect (clear) the Secure connection option. Deselecting this option ensures that the device disconnects its Bluetooth connection only when you tell it to.7. Tap Finish to save your seings.8. On your desktop computer, right-click the Bluetooth icon on your menu bar. 9. Select Add Bluetooth device.
10. Select Let me choose passkey. 11. Type in a passkey.12. On the Field PC, type in the same passkey.13. Tap Next, OK, and Done.Print from the Field PC to a Bluetooth Printer using the Serial Port ProfileCurrently, not many Windows Mobile applications support direct printing. However, you can use third-party printing programs such as PrintBoy® to print data from the Field PC with a Bluetooth printer.Before you set up a third-party print application, you need to rst discover the Bluetooth printer. To do so, follow these steps:1. On the Field PC, make sure Bluetooth is on and that the Field PC is discoverable. 2. In the Wireless Manager, tap Menu then Bluetooth Seings.3. From the Devices tab, select New partnership. 4. When the printer appears on the list of devices, select it.5. Tap Next.6. Enter the passkey and tap Next.7. Select Serial Port.8. From the COM Ports tab, tap New Outgoing port.9. Select the printer.10. Tap New COM port.11. Deselect the Secure Connection option.You can now print using a third-party print application you install on the Field PC. For details about using the application to print, see the documentation that came with the application.Ch 6  Bluetooth Wireless Communications 59
60 Field PC Owner’s ManualDial-Up Networking (DUN) ProfileThis prole allows you to connect to the Internet using a cell phone dial-up connection or cordless modem. Instructions for partnering with both device types are described below.Connecting to the Internet using a Cell Phone Dial-Up Connection1.  Make your cell phone discoverable. (See the user documentation that came with your cell phone for instructions.)2.  On the Field PC, tap on the Wireless Manager icon on the Today screen. 3. Tap Menu > Bluetooth Seings.4. Select the Turn on Bluetooth checkbox.5. In the Devices tab, choose New Partnership.6. Select your cell phone from the list of devices and tap Next.7. Enter any passkey on the Field PC.8. Enter the same passkey and any other requested information on your cell phone.9. On the Field PC, select Dialup Networking, then tap Next.10. Tap Start > Seings > Connections tab > Connections.11. Choose Add a new modem connection. 12. Enter a name for the connection and select Bluetooth as the modem.13. Tap Next.14. Select the name of your cell phone, then tap Next.15. Enter the phone access number according to your phone carrier’s specications. Tap Next.16. Enter a user name, password, and domain as specied by your network administrator.17. Tap Advanced. 18. Fill in the remaining boxes as appropriate. Tap OK when you are done.19. Tap Finish. Now you should be able to connect to the Internet on the Field PC through your phone’s dialup connection.
Human Interface Device (HID) Profile1. Make sure Bluetooth is on or discoverable. Create a Bluetooth partnership with the device.2. Make sure the HID is ready for pairing and select New Partnership to search for a Bluetooth device.3. Select the name of the HID and tap Next.4. If the device has an assigned passkey or accepts a passkey you give it, enter the passkey on the Field PC and tap Next. If the device needs no passkey, leave the Passkey eld blank, tap Next, and choose No when you are asked whether you want the device to be added to the device list. Note: Saying No when you are asked whether you want to add the device to the device list allows you to proceed to the next screen; saying Yes returns you to the passkey screen.5. If appropriate, enter the same passkey on the HID to establish a partnership.6. Select Input Device. 7. Tap Finish. You now have a partnership with the HID. Note: If no partnership appears for the HID on the Devices tab screen, try reseing your Field PC. Object Push Profile (OPP) or BeamingYour Field PC uses Object Exchange File (OBEX) protocol to transfer or “push” electronic objects such as business cards from one Bluetooth-enabled device to another.Transferring Data from a Bluetooth-Enabled Device To send data (beam) from a Bluetooth-enabled device to the Field PC, follow these steps:1. Make sure the Field PC is discoverable.2. On the Bluetooth-enabled device, tap and hold the stylus on the lename you want to beam. A menu appears.3. Choose Beam File. The device nds the Field PC. 4. Send data from the device to the Field PC. The Field PC receives the data.Ch 6  Bluetooth Wireless Communications 61
62 Field PC Owner’s ManualTo send data from your Field PC to a Bluetooth device, follow these steps:1. Make sure the device is discoverable. (For instructions, see the user documentation that came with your device.)2. On the Field PC, make sure Bluetooth is on.3. In File Explorer, tap and hold on the name of the le you want to transfer, then choose Beam File from the menu that appears. 4. When the name of the device becomes visible, tap on the name. 5. On the Bluetooth device, accept the le. The le is transferred.More Information about BluetoothFor more information on Bluetooth proles visit hp://bluetooth.com.
7Wi-Fi Connections 64  Wi-Fi Connections
64 Field PC Owner’s ManualThis chapter teaches how to connect to networks and the internet through the built in Wi-Fi module. Not all Field PCs come with an integrated Wi-Fi module. Wi-Fi ConnectionsWhen the Field PC is connected through Wi-Fi, the icon appears in the tool bar.Connecting to Wi-Fi NetworkWhen entering an access point, a window pops up on your screen asking if the network connects to the internet or a private or corporate network. Choose the correct network and tap Connect. The choice is stored in the Connection Manager for future use.If the window does not pop up, you can actively look for a network connection by completing the following steps:1. Activate Wi-Fi by going to Start > Seings > Connections tab > Wireless Manager.
2. Turning the Wi-Fi on automatically scans the area for available networks.3. When the Field PC has completed the scan, a list of available networks and their strengths appears in Start > Seings > Connections tab > Wi-Fi Note: Click on this icon when you need help.Note: Click on this icon when you need help.Ch 7  Wi-Fi Connections 65
66 Field PC Owner’s Manual4. Tap on the desired network to connect.Note: If the network is password protected, a window appears for the password to be inserted. Managing ConnectionsTo adjust the Wi-Fi seings, access the Managing Connections window go to Start > Seings > Connections tab > Connections.
8Care and Maintenance 68  Caring for your Field PC 73  Disposing of the Field PC Battery Pack
68 Field PC Owner’s ManualThis chapter explains how to store, clean, and protect your Field PC and baery pack.Caring for Your Field PCStoring your Field PC and Battery PackWhen the Field PC is not being charged and is suspended, it draws a small amount of power. This power draw is used to maintain the memory (RAM) of the Field PC in the same state it was when it was suspended.When the baery reaches a low charge, the Field PC automatically comes out of suspend mode and powers o so there is no further drain on the baery. This feature protects your baery from damage if this charge level occurs. The Field PC resets when the baery is recharged and turned on.Data and programs are secure, as long as they have been saved, even if the baery pack becomes discharged. The Field PC does not depend on the baery to store the data for extended periods.Storing the Field PC for Less Than Two WeeksTo protect the les on your Field PC during storage periods of less than two months, complete the following steps:1. Close all application programs.2. Plug your Field PC into the AC wall adapter that was shipped with your Field PC, or place the unit into the USB/Power Dock that is plugged into the AC wall charger. Note: Charging the Field PC when it is not in use helps the Field PC to avoid inaccurate baery gauging and having the baery discharge to low levels.
Storing the Field PC for More than Two WeeksTo protect the Field PC during storage periods of two months or more, complete the following steps:1. Charge the baery to full capacity (100%).2. Close all running programs and turn o the Field PC.3. Remove the baery pack.4. Place the baery pack in a dry location. Taking your Field PC out of Extended StorageWhile storing the baery pack, it naturally discharges slightly while inactive. When you are ready to use your Field PC aer storing it for an extended period of time, complete the following steps:1. Insert the baery pack. 2. Turn on your Field PC.3. Enter 10% on the Baery Seings pop up screen.4. Tap on the Accept buon to save the new seing.5. Plug your Field PC into the external AC wall charger and charge the baery pack in your Field PC for at least 6 hours. Ch 8  Care and Maintenance 69
70 Field PC Owner’s ManualProtecting the Touchscreen Protect the touchscreen from impact, pressure, or abrasive substances that could damage it. To further protect the touchscreen, apply one of the screen protectors that came with your Field PC. When using any screen protector, be sure to replace the screen protector as oen as the screen protector packaging directs. To apply a screen protector, follow the directions on the package.Protecting the Field PC against Mechanical ShockThe Field PC is designed for protection from mechanical shock. It can be dropped from up to four feet (1.219 m) onto plywood. Shock protection is guaranteed only when the optional expansion pods and latches are securely fastened.Cleaning the Field PCIn some environments, the Field PC is exposed to substances, such as pitch or tar which require stronger cleaning supplies for removal. CAUTION: Some of the available cleaning supplies/chemicals on the market will damage the case. Safe Cleaners to UseThe Field PC can be cleaned safely with the following cleaners: Greased Lightening® Multi-Purpose Cleaner Orange Clean (Orange Glo® International)Fantastik® OxyPower® (SC Johnson)Orange Cleaner Oil Eater (Kao International, Ltd.)!!
Cleaning the CaseTo clean the case, it is recommended that you use warm water, mild detergent, and a toothbrush. Note: This method can be used when cleaning the keyboard. Do not use the brush on the display, it could be scratched.Cleaning the KeyboardDirt and debris can get underneath the keyboard bezel. To clean, use a coin (do not use a screwdriver) to pry the bezel up at the recess located at the boom of the keyboard. We recommend that you use warm water, mild detergent, and a toothbrush to clean the keyboard. The Field PC remains sealed during this process. Note: Do not direct a high pressure stream of water at the keyboard to clean it. This action could break the seal, causing water to get inside the Field PC.Ch 8  Care and Maintenance 71
72 Field PC Owner’s ManualReaach the bezel by inserting the top ridge and lowering the bezel down at onto the case. Press down along the sides while aligning the keys through the holes.Note: Aer you reaach the bezel, check each key to make sure it is completely free from the bezel. If any part of a key is caught underneath the bezel, you may not be able to turn the Field PC on or you may hear a continuous string of beeps.Cleaning the TouchscreenTo clean the touchscreen of the Field PC, complete the following steps:1. Press the BLUE shi key + TS (BkSp) key to disable the touchscreen.2. Use a clean coon cloth to wipe o the screen. Note: Do not use anything abrasive that could scratch the screen (including tissues and paper towels). 3. Press the BLUE shi key + TS (BkSp) key to enable the touchscreen.
Disposing of the Field PC and Battery PackThis product must not be disposed of with municipal waste. It is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment. If you cannot nd a location, contact the manufacturer for information about disposal.The Nickel Metal Hydride baery pack for your Field PC is recyclable. Avoid placing it in the trash or municipal waste system.To nd the nearest baery recycling center in the USA, visit the Rechargeable Baery Recycling Corporation’s website at www.rbrc.org/call2recycle/index.html or call 1-800-8-baery. The Field PC contains no mercury or cadmium. Ch 8  Care and Maintenance 73
74 Field PC Owner’s Manual
9Service Information 76  Repairing the Field PC 76  Preparing for a Service Center Call
76 Field PC Owner’s ManualThis chapter teaches you how to return and prepare your Field PC for repair. It also shows you where to nd information you need when making a call to a service center.Repairing the Field PCIf the Field PC is in need of repair, call your service center for a Return Materials Authorization number (RMA). Important: Do not aempt to service the device yourself. This action voids the warranty.Preparing for a Service Center CallWhen you contact a service center, you are asked to identify your device. Your device serial number and other identication information can be found by following these steps:1. Tap Start > Seings. The Seings window appears.2.  Tap the System tab.3.  Choose System Cong. The System Conguration window appears, listing the information you need for the service center. Note: The numbers in the above screen may not be the numbers on your Field PC.
AProduct Specifications and Warnings 78  Product Specifications 79  Battery Warnings 80  Equipment Warnings
78 Field PC Owner’s ManualProduct SpecificationsOperating System Microso® Windows Mobile® 6Processor Intel® XScale® PXA270, 624 MHzMemory 128 MB RAMPrimary Storage 512 MB, 1G, 2GDisplay Color 3.8” QVGA active matrix color TFT transective LCD with LED backlight; 320 x 240 pixelsDisplay Mono 4.1” QVGA with LED backlight; 320 x 240 pixelsTouchscreen Sealed, resistive, pressure sensitive, enable/disableExpansion and I/O slotsMicro SD; PCMCIA 3.3/5 volts of Type I or Type IIKeyboard All printable ASCII characters, 12 function keys Operating Temperature –4° to 131° F (–20° to 55° C)Storage Temperature –31° to 140° F (–35° to 60° C)Baery Charging Temperature32° to 104° F (0° to 40° C)Water, Sand and Dust proof ratingIP67 sealed against accidental immersion (1 m for 30 minutes)Baery Pack Rechargeable nickel metal hydride (NiMH)Communications ModuleSerial port 9-pin D-sub connector, USB Host (Full A), USB Client (Mini B), power input 12 volts DCCOM 1 Port 9-pin D-sub connector; full modem control signals, 5 V @ 200 mA available on DTR pin 4; controlled by DTR signal; conformal coated
Power Input 12 volts DC; Range 10-20 VDC; reverse polarity protection; over voltage protection; auto shut oWireless CommunicationsOptional integrated Bluetooth and 802.11 b/g WLAN (Wi-Fi)Internal Clock Integrated real time clock with baery backupEnunciators On system trayBattery WarningsFollow these additional safety guidelines:Use only baery packs approved for use with this device.Do not store or leave your device or baery pack near a heat source such as a radiator, replace, stove, electric heater, or other heat-generating appliance, or otherwise expose it to temperatures in excess of 140° F (60° C). Do not try to open the baery pack.Do not carry a baery pack in your pocket, purse, or other container where metal objects (such as car keys or paper clips) could short-circuit the baery pack terminals.Keep the baery pack contacts clean. If they get dirty, wipe them o with a so cloth. Dispose of the baery pack properly. See the section called Disposing of your Field PC and baery packs in this manual for instructions.Do not install the baery pack backwards so that the polarity is reversed.Do not connect the positive terminal and the negative terminal of the baery pack to each other with any metal object (such as wire).Do not solder directly onto the baery pack.Do not place the baery pack in direct sunshine. A  Product Specifications and Warnings 79
80 Field PC Owner’s ManualIn the rare event that the baery pack leaks and uid gets into the eye, do not rub the eye. Rinse well with water and immediately seek medical care.Risk of explosion if incorrect baery type is used.Equipment WarningsWARNING: To reduce the risk of personal injury, electrical shock, re or damage to the equipment:Plug the wall charger into an electrical outlet that is easily accessible at all times.Disconnect power from the equipment by unplugging the wall charger from the electrical outlet or unplugging the synchronization cable from the host computer.Do not place anything on the wall charger cord or any of the other cables. Arrange them so that no one may accidentally step on or trip over them.Do not pull on a cord or cable. When unplugging the wall charger from the electrical outlet, pull on the plug, not the cord.Use only wall chargers intended for the Field PC. Using any other external power source can damage your product and void your warranty.Using the Field PC in extreme temperaturesThe Field PC operates in ranges from –4° F to 131° F (–20° C to 55° C). To help your device function properly, store the device indoors when possible.Other tips:If the Field PC is exposed to temperatures below 14° F (–10° C), the device may slow down or the display backlight may become dim to reduce the load on the baery power. Extremely low or high temperatures may prevent the baery pack from charging. Charge the baery pack in temperatures between 32° F and 104° F (0° C and 40° C). For best results, charge the baery pack at room temperature (68° F or 20° C)!
BCertifications and Regulatory Information 82  Regulatory Information 83  Limited Product Warranty
82 Field PC Owner’s ManualRegulatory InformationFCCThis device complies with Part 15 of the FCC Rules. Operation of this equipment is subject to the following two conditions:1. The device may not cause harmful interference.2. This device must accept any interference received, including interference that may cause undesired operation.Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:Reorient or relocate the receiving antenna.Increase the separation between the equipment and receiver.Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.Consult the dealer or an experienced radio/TV technician for help.
CAUTION: Changes or modications to the Field PC that are not expressly approved by the manufacturer could void the user’s authority to operate the equipment.CAUTION: Only approved accessories may be used with this equipment. In general, all cables must be high quality, shielded, correctly terminated, and normally restricted to two meters in length. Wall chargers approved for this product employ special provisions to avoid radio interference and should not be altered or substituted. This device must not be co-located or operating in conjunction with any other antenna or transmier.This device operates in compliance with the FCC radiation exposure limits for an uncontrolled environment. Users must follow instructions provided in the user documentation to satisfy compliance with FCC RF exposure requirements.This device has been tested and meets the FCC RF exposure guidelines when used with the body worn accessories supplied with this product. Use of other accessories for body worn use may expose the user to RF radiation that exceeds the FCC guidelines.Industry CanadaThis Class B digital apparatus complies with Canadian ICES-003.Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.CE markingProducts bearing the CE marking comply with the 2004/108/EC (EMC Directive), 1999/5/EC (R&TTE Directive), 2006/95/EC (Low Voltage Directive) issued by the Commission of the European Community.!!B  Certifications and Regulatory Information 83
84 Field PC Owner’s ManualCE compliance of this device is valid only if powered with/by a CE-marked wall charger provided by the manufacturer. Compliance with these directives implies conformity to the following European Norms (in parentheses are the equivalent international standards and regulations):EN 55022 (CISPR 22)—Electromagnetic InterferenceEN 55024 (IEC 61000-4-2, 3, 4, 5, 6, 8, 11)— Electromagnetic ImmunityEN 61000-3-2 (IEC 61000-3-2)—Power Line Harmonics EN 61000-3-3 (IEC 61000-3-3)—Power Line FlickerEN 60950 (IEC 60950)—Product Safety ETS 300 328-2—Technical Requirements for 2.4 GHz Radio Equipment EN 301 489-1, -17—General EMC Requirements for Radio EquipmentEuropean UnionThe telecommunication functions of this device may be used in the following EU and EFTA countries: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Liechtenstein, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovak Republic, Romania, Slovenia, Spain, Sweden, Switzerland, and United Kingdom.Restrictions apply to the operation of the 802.11b/g radio in this device. Use of channel 14 is outside of the band of frequencies permied in the European Union and should not be used.FranceRestrictions apply to the operation of the Bluetooth radio in this device. This equipment may be used indoors. Due to the potential that this radio may transmit in excess of 10mW in the band 2454 to 2483.5 MHz, outdoor operation is restricted. The latest requirements may be found at: hp://www.art-telecom.fr
Limited Product Warranty Juniper Systems, Inc. (“JS”) warrants that the Field PC/Field PCs shall be free from defects in materials and workmanship, under normal intended use, for a period of 12 months from the date of shipment. The Field PC can be warranted up to 5 years (including the standard warranty period) through the purchase of an extended warranty. JS warrants that the following items shall be free from defects in materials and workmanship, under normal intended use, for a period of ninety (90) days from the date of shipment: baery packs,media containing the Field PC programs,desktop computer programs,user documentation, andaccessories. Extended warranties apply only to the Field PC, not baery packs, media containing the Field PC programs, desktop computer programs, user documentation, and accessories. Parts that are excessively worn are not covered under the extended warranty plan. These parts may include, but are not limited to, the keyboard elastomer and switch matrix, hand straps, touchscreens, and connector modules.Warranty ExclusionsThis warranty shall not apply if: (i) the product has been set up improperly or has been improperly installed or calibrated, (ii)  the product is operated in a manner that is not in accordance with the user documentation, (iii) the product is used for a purpose other than for which it was designed, B  Certifications and Regulatory Information 85
86 Field PC Owner’s Manual(iv) the product has been used in environmental conditions outside of those specied for the product, (v) the product has been subject to any modication, alteration, or change by or on behalf of customer (except and unless modied, changed or altered by JS or under direct supervision of JS), (vi) the defect or malfunction results from misuse or accident, (vii) the serial number on the product has been tampered with or removed, or (viii) the product has been opened or tampered with in any way. This warranty is exclusive and JS will not assume and hereby expressly disclaims any further warranties, whether express or implied, including, without limitation, any warranty as to merchantability, tness for a particular purpose, non-infringement or any warranties arising from the course of performance, dealing, or usage of trade. JS specically makes no warranties as to the suitability of its products for any particular application. JS makes no warranties that its products will meet your requirements or will work in combination with any hardware or applications soware products provided by third parties, the operation of its products will be uninterrupted or error free, or all defects in the product will be corrected. JS shall not be responsible for soware, rmware, information, or memory data contained in, stored on, or integrated with any products returned to JS for repair, whether under warranty or not.RemedyIn the event a defect in materials or workmanship is discovered and reported to JS within the specied warranty period, JS will, at its option, repair the defect or replace the defective part or product. Replacement products may be new or reconditioned. JS 
warrants any replaced or repaired product for a period of ninety (90) days from the date of return shipment, or through the end of the original warranty period, whichever is longer.Limitation of LiabilityTo the fullest extent allowed by law, the obligation of JS shall be limited to the repair or replacement of the product. JS shall in no event be liable for special, incidental, or consequential, indirect, special or punitive damages of any kind, or for loss of revenue or prots, loss of business, loss of information or data, or other nancial loss arising out of or in connection with the sale, installation, maintenance, use, performance, failure, or interruption of any product. Any responsibility and/or liability of JS shall, in connection with a warranted product, be limited in the maximum amount to the original purchase price.Warranty RepairsTo obtain repair or service on the Field PC, contact your authorized repair center within the applicable warranty period to receive a Return Material Authorization (RMA) number. Repairs returned without proper authorization may acquire an additional handling fee and/or delay in the repair. The customer is responsible to prepay all shipping costs when sending equipment to a repair center. JS will return the repaired equipment by the same method it was received with costs of shipping prepaid.Governing LawThis warranty is governed by the laws of Utah, and excludes the United Nations Convention on Contracts for the International Sale of Goods. The courts of Utah shall have exclusive personal jurisdiction in case of any disputes arising out of or in connection with this warranty.B  Certifications and Regulatory Information 87
88 Field PC Owner’s ManualServices and Materials Provided Under WarrantyAnalysis of problem by service technicianLabor and materials required to x defective partsFunctional analysis performed aer repairRepair turnaround within 10 working days of receipt unless special circumstances exist Shipping costs to return device to customer
Index
90 Field PC Owner’s ManualIndexAActiveSync 20Backing up Data 44Creating a connection 20Re-establishing Connection 48Alkaline Baery HolderInstall 15Applications Manager 24, 42Viewing Memory Allocation 42BBacking Up Data 44To Desktop Computer 44Backlight 24, 38Timer 39Baery Pack. See also Alkaline Baery HolderBaery Seings Screen 12Capacity 14Charging Temperature 15, 78Disposing of 73Install 7Percentage and Capacity 13Recharging 14Warnings 79Baery Seings Screen. See Baery PackBluetoothAdvanced Audio Distribution (A2DP) 57Audio/Video Control 57Beaming. See Object Push Prole (OPP)Create a Partnership 51Dial-Up Networking (DUN) 60Dial-Up Networking proleusing a cell phone to connect to the Internet 60Dongle 58
Drivers and Proles 50File Transfer Prole (FTP) 57Human Interface Device (HID) 61Incoming COM Port 56Internet using Dial-up Connection 60Make Discoverable 50Object Push Prole (OPP) 61Outgoing COM Port 54Passkey 52Print 59Serial Port Prole (SPP) 57Virtual COM Port 53Wireless Manager 50Bluetooth ProlesProles 56CCare and Maintenance 68Cleaning 70Protecting Against Mechanical Shock 70Protecting the touchscreen 70Storage 68Less Than Two Months 68More Than Two Months 69Taking Out 69CE Marking 83CF Card. See PC CardCommunicating with a Desktop Computer 20, 48. See also Ac-tiveSync and Windows Mobile Device CenterCommunications Module 78Connector Protectors 26Contrast/Brightness 24, 39Copying Data 46Creating a Name 40Index 91
92 Field PC Owner’s ManualDData Entry 35Block Recognizer 36Keyboard Utility 35Leer Recognizer 35Transcriber 36DisplayProduct Specications 78EEquipment Warnings 80Exploring Files 41GGeing Started Disc 20KKeyboard 24Cleaning 71Diagram 24Shi Keys 25Blue 24Orange 24MMemory 78Micro SD Card 30Microso Website 43NNew Baery Detected. See Baery PackOOn-device Help 43Operating System 78
PPC Card 30Power Buon 24, 26Powering O 26Reseing the Device 27Restoring Factory State 28Suspending 27Product Specications 78RRegulatory Information 82Repairing 76Return Materials Authorization (RMA) 76Return Materials Authorization. See RepairingSSD Card. See PC CardSo Keys 38Le 24Right 24Soware Developers Kit 48Start Menu 35Windows Buon 24Status Icons 37Baery Capacity 37Charge Indicator 37Speaker 37Touch Screen 37Stylus 28TTask Manager 42Close Unused Programs 42Switching Between Running Programs 42Index 93
94 Field PC Owner’s ManualTemperaturesBaery Charging 78Charging Baery Pack. See also Baery PackExtreme 80Operating 78Storage 78Today Screen 34Touch Screen 24, 29Calibrating 29Cleaning 72Disabling 29Protecting 29, 70UUSB/Power Dock 16Charging 17LED Indicators 16Power Supply 17USB Communication 18VVehicle Power 18Vehicle Mode 18WWi-Fi 64Connecting to Network 64Managing Connections 66Status Icons 64Windows Mobile Device Center 21Backing Up Data 45Creating a Connection 21Re-establish Connection 48

Navigation menu