Junlan Electronic CABB6604 GLITTER LAMP WITH BLUETOOTH SPEAKER / GROOVY LAMP WITH BLUETOOTH SPEAKER User Manual 1

Shenzhen Junlan Electronic Ltd GLITTER LAMP WITH BLUETOOTH SPEAKER / GROOVY LAMP WITH BLUETOOTH SPEAKER 1

User Manual

Glitter Lamp Bluetooth SpeakerMODEL:ITSBL-509PLEASE READ CAREFULLY BEFORE OPERATING THIS EQUIPMENT KEEP IT IN A SAFE PLACE FOR FUTURE REFERENCE
IMPORTANT SAFETY INSTRUCTIONSDANGEROUS VOLTAGE:The lighting flash with arrowhead symbol withinan equilateral triangle is intended to alert the user to the presence ofuninsulated “dangerous voltage” within the product’s enclosure that maybe of sufficient magnitude to constitute a risk of electric shock to persons.ATTENTION:The exclamation point within an equilateral triangle is intended toalert the user to the presence of important operating and maintenance(servicing) instructions in the literature accompanying the appliance.WARNING:TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSETHIS UNIT TO RAIN OR MOISTURE.WARNING: USE UNDER SUPERVISION OF AN ADULT DUE TO LONGCORD This unit has a long cord that can be easily tripped on or pulled on,causing injury. Please make sure it is arranged so that it will not drape over atabletop, etc. Where it can be pulled on by children or tripped over accidentally.FCC STATEMENT:This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1)This device may not cause harmful interference, and(2)This device must accept any interference received, including interference that may cause undesired operation. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.CAUTION: TO REDUCE THE ELECTRIC SHOCK, DO NOT REMOVE THECOVER (OR BACK). NO USER SERVICEABLE PART INSIDE, REFERSERVICING TO QUALIFIED SERVICE PERSONNEL.CALIFORNIA PROP 65 WARNING:”WARNING” This product contains chemicals known to the State of California to cause birth defects or other reproductive harm. For more information on these regulations and a list of chemicals, log on the following website: http://www.oehha.ca.gov/prop65.htmlRISK OF ELECTRIC SHOCK DO NOT OPENCAUTION2
This equipment has been tested and found to comply with the limits for a ClassB digital device, pursuant to Part 15 of the FCC Rules. These limits aredesigned to provide reasonable protection against harmful interference in aresidential installation. This equipment generates, uses and can radiate radiofrequency energy and, if not installed and used in accordance with theinstructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particularinstallation. If this equipment does cause harmful interference to radio ortelevision reception, which can be determined by turning the equipment off andon, the user is encouraged to try to correct the interference by one or more ofthe following measures:●Reorient or relocate the receiving antenna.●Increase the separation between the equipment and receiver.●Connect the equipment into an outlet on a circuit different from that to whichthe receiver is connected.●Consult the dealer or an experienced radio/TV technician for help.FCC WARNING:Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.Before using the unit, be sure to read all operating instruction carefully, pleasenote that these are general precautions and may not pertain to your unit. Forexample, this unit may not have the capability to be connected to an outdoorantenna.1. Read these instructionsAll the safety and operating instructions should be read before the appliance isoperated.2. Keep these instructionsThe safety and operating instructions should be kept for future reference.3. Heed all warningsAll warnings on the appliance and in the operating instructions should beadhered to.4. Follow all instructionsAll operation and use instructions should be followed.5. Do not use this apparatus near waterThe appliance should not be used near water; for example, near a bath tub,washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimmingpool.FCC NOTICE:IMPORTANT SAFETY INSTRUCTIONS3
6. Clean only with dry clothThe appliance should be cleaned only as recommended by the manufacturer.7. Do not block any ventilation openings.Install in accordance with themanufacturer’s instructions.Slots and openings in the cabinet and in the back or bottom are provided forventilation, to ensure reliable operation of the product and to protect it fromoverheating. These openings must not be blocked or covered. The openingsshould never be blocked by placing the product on a bed, sofa, rug, or similarsurface. This product should never be placed near or over a radiator or heatsource. This product should not be placed in a built-in installation, such as abookcase or rack unless proper ventilation is provided or the manufacturer’sinstructions have been adhered to.8. Do not install near any heat sources such as radiators, heat registers,stoves, or other apparatus (including amplifiers) that produce heat.9. Do not defeat the safety purpose of the polarized or grounding-typeplug. A polarized plug has two blades with one wider than the other. Agrounding type plug has two blades and a third grounding prong. Thewide or the third prong are provided for your safety. If the provided plugdoes not fit into your outlet, consult an electrician for replacement of theobsolete outlet.10. Protect the power cord from being walked on or pinched particularlyat plugs, convenience receptacles, and the point where they exit from theapparatus.11. Only use attachments / accessories specified by the manufacturer.12. Use only with a cart, stand, tripod, bracket, or tablespecified by the manufacturer, or sold with the apparatus.When a cart is used, use caution when moving thecart/apparatus combination to avoid injuryfrom tip-over.An appliance and cart combination should be moved with care. Quick stop,excessive fore and uneven surfaces may cause the appliance and cartcombination to overturn.13. Unplug this apparatus during lightning storms or when unused forlong periods of time.To protect your product from a lightning storm, or when it is left unattended andunused for long periods of time, unplug it from the wall outlet and disconnectthe antenna or cable system. This will prevent damage to the product due tolightning and power-line surges.14. Refer all servicing to qualified service personnel. Servicing isrequired when the apparatus has been damaged in any way, such aspower-supply cord or plug is damaged, liquid has been spilled or objectshave fallen into the apparatus, the apparatus has been exposed to rain ormoisture, does not operate normally, or has been dropped.15. Power sourceThis product should be operated only from the type of power source indicated4
17. OverloadingDo not overload wall outlets and extension cords as this can result in a risk offire or electric shock.18. Object and liquid entryNever push objects of any kind into the product through openings as they maytouch dangerous voltage points or short out parts that could result in fire orelectric shock. Never spill or spray any type of liquid on the product.19.20.ServiceDo not attempt to service this product yourself as opening or removing coversmay expose you to dangerous voltage or other hazards. Refer all servicing toqualified service personnel.21.Replacement partsWhen replacement parts are required, be sure the service technician usesreplacement parts specified by the manufacturer or those that have the samecharacteristics as the original parts. Unauthorized substitutions may result infire or electric shock or other hazards.22.Safety checkUpon completion of any service or repairs to this product, ask the servicetechnician to perform safety checks to determine that the product is in properoperating condition.Damage requiring serviceUnplug this product from the wall outlet and refer service to qualified servicepersonnel under the following conditions.a)When the power- supply cord or plug is damaged.b)If liquid has been spilled or objects have fallen into the product.c)If the product has been exposed to rain or water.d)If the product does not operate normally by following the operatinginstructions. Adjust only those controls that are covered by the operatinginstructions, as an adjustment of other controls may result in damage and willrequire extensive work by a qualified technician to restore the product to itsnormal operation.e)If the product has been dropped or the cabinet has been damaged.f)When the product exhibits a distinct change in performance- this indicates aneed for service.on the marking label. If you are not sure of the type of power supply to yourhome, consult your appliance dealer or local power company. For productsintended to operate from battery power, or other source, refer to the operationinstructions.16. Power linesAn outside antenna system should not be located in the vicinity of overheadpower lines or other electric light or power circuits, or where it can fall into suchpower lines or circuits. When installing an outside antenna system, extremecare should be taken to keep from touching such power lines or circuits ascontact with them might be fatal.5
CARE AND OPERATION:The lamp speaker is designed to operate in an average room temperature of 22-25℃,make sure the lamp speaker is at room temperature before starting. Always operate theunit on a firm, flat and stationary surface. Do not operate the lamp speaker on any warmor hot surfaces.CAUTION:●The lamp speaker should never be operated for more than 24 hours at a time. Ifoperated for more than 24 hours, the base can get deformed from heat.●Do not add any fluid or solids to your lamp. The air space at the top of the lamp speakerhas been provided to allow for expansion.●Do not place the lamp speaker near sources of heat or cold such as heat and airconditioning vents. Always operate the lamp speaker only at room temperature. Operationor storage of lamp speaker in direct sunlight will cause colors to fade.●The lamp speaker operates at a very high temperature and the vessel is made of glass.Operate out of the reach of the children and pets.●Do not operate the lamp speaker with any other bulb except for the one provided by thismanufacturer’s customer service.●Do not leave the lamp speaker unattended. Do not run the lamp speaker while sleeping,as this is novelty item and it is not intended to be used as night light.●Do not replace with unauthorized bulb in this lamp speaker.●The lamp and speaker base will be hot while in use and after the unit has been turnedoff/unplugged. Do not touch the lamp speaker or the bulb while it is on.●Keep it out of the reach of the children and pets.●While lamp speaker is in operation, be sure not to move or shake it in order to avoidpermanently damaging the lamp speaker. The lamp speaker should never be heated byany other means, nor should it be cooled artificially. Do not use when the glass is crackedor damaged.●The space on the top of the lamp speaker is provided for expansion. Do not break theseal of the cap to fill it with liquid or solid. Breaking the seal will void your warranty and ruinthe product.●If the external flexible cable or cord of the base is damaged, do not attempt to replace ityourself. It should be replaced by the manufacturer, service agent or a similar qualifiedperson in order to avoid a hazard.CAUTION:6BE SURE TO READ AND KEEP THIS INSTRUCTIONS
PRODUCT OVERVIEWONOF FIO●Do not replace with unauthorized bulb in this lamp speaker.●The lamp and speaker base will be hot while in use and after the unit has been turnedoff/unplugged. Do not touch the lamp speaker or the bulb while it is on.●Keep it out of the reach of the children and pets.Do not take the glass vessel out although it can be taken out from the speaker base!●Do not put your fingers into the bulb cave, it is very hot, the temperature can reach up to above 100 .●℃℃℃℃℃℃℃Unplugged the speaker if you want to take out the glass vessel, and wait until the base, bulb cave and glass vessel get cold.●DANGER!Glass VesselBulb CaveVessel CapSpeaker Base(Very hot when in use or after use)(Very hot when in use or after use)(Very hot when in use or after use)7Do not stare at the bulb cave, it may hurt your eyes.●
ONOF FIO12345678PRODUCT OVERVIEW1. Vessel cap2. Glass vessel3. Volume up/next button4. Volume down/previous button5. Power on/off, play/pause button6. Bluetooth indicator7. Speaker8. Power switch8NOTE: The glass vessel may be fragile!Be careful!
BLUETOOTH OPERATION1. Plug the power plug into the wall outlet with power supply 120V~,60Hz.2. Push the power switch on AC cord to "ON" position. During playing:3. Press and hold the button on the speaker for seconds to power on the unit. The Bluetooth indictor will illuminate and flash blue, now the speaker is in pairing mode.4. Activate the Bluetooth on external Bluetooth device and try to search the speaker,5. The speaker will send a tone and the Bluetooth indicator will stay lit after successful connection.6. The speaker will automatically pair and connect with the last paired device if both the device and the speaker are activated and in range.ITSBL-509 the pairing name " " will appear on pairing list, select it and try connection.Press the button to pause, press it again to play again.Press the button to skip to next track.Press the button to skip to previous track.Press and hold the button to increase volume.Press and hold the button to decrease volume.9
is a trademark on a registered trademark of BluetoothSIG Inc. All other trademarks and trade names are those of their respective owners.SPECIFICATIONSSPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICEBluetooth working range..........................................(tested in open area)33ft(10m)Bulb life........................................................................................................2000HsBulb power.......................................................................................................20WAudio output..................................................................................................1X4W10TROUBLESHOOTING GUIDECheck the following before requesting service:SYMPTOM POSSIBLE CAUSE POSSIBLE SOLUTIONCan’t power onBT notunctioningThe external BT device hadNOT paired to the unit Pair the external BT device to the unitThe external BT device toofar from the unitPlace the external BT device close tothe unitfNo sound orsound weakSound distortionVolume level of the unit is lowVolume level of the unit is highVolume level of the paired/ connected device is in low levelVolume level of the paired/connected device too highRise the volume level of the paired/connected deviceReduce the volume level of the paired/connected devicePress and hold the button to decrease volumePress and hold the button to increase volumePush the power switch to "ON" position. Power switch is on"OFF" position Power source.................................................................................AC120V~;60HzBulb flux..........................................................................................................90 lm
WARRANTY11

Navigation menu