Junlan Electronic CABB6604 GLITTER LAMP WITH BLUETOOTH SPEAKER / GROOVY LAMP WITH BLUETOOTH SPEAKER User Manual 1

Download:
Mirror Download [FCC.gov]
Document ID	3315231
Application ID	E8LH2kxpfXGNVNr4m7yzdw==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	105.26kB (1315792 bits)
Date Submitted	2017-03-14 00:00:00
Date Available	2017-03-14 00:00:00
Creation Date	2016-12-17 17:18:16
Producing Software	Adobe PDF library 10.01
Document Lastmod	2017-03-09 17:15:29
Document Title	未标题-1
Document Creator	Adobe Illustrator CS6 (Windows)

Glitter Lamp Bluetooth Speaker
MODEL:ITSBL-509
PLEASE READ CAREFULLY BEFORE OPERATING THIS EQUIPMENT
KEEP IT IN A SAFE PLACE FOR FUTURE REFERENCE
IMPORTANT SAFETY INSTRUCTIONS
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE ELECTRIC SHOCK, DO NOT REMOVE THE
COVER (OR BACK). NO USER SERVICEABLE PART INSIDE, REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
DANGEROUS VOLTAGE:The lighting flash with arrowhead symbol within
an equilateral triangle is intended to alert the user to the presence of
uninsulated “dangerous voltage” within the product’s enclosure that may
be of sufficient magnitude to constitute a risk of electric shock to persons.
ATTENTION:The exclamation point within an equilateral triangle is intended to
alert the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the appliance.
WARNING:TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE
THIS UNIT TO RAIN OR MOISTURE.
WARNING: USE UNDER SUPERVISION OF AN ADULT DUE TO LONG
CORD This unit has a long cord that can be easily tripped on or pulled on,
causing injury. Please make sure it is arranged so that it will not drape over a
tabletop, etc. Where it can be pulled on by children or tripped over accidentally.
CALIFORNIA PROP 65 WARNING:”WARNING” This product contains chemicals
known to the State of California to cause birth defects or other reproductive harm.
For more information on these regulations and a list of chemicals, log on the
following website: http://www.oehha.ca.gov/prop65.html
FCC STATEMENT:
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1)This device may not cause harmful interference, and
(2)This device must accept any interference received, including interference
that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated
with minimum distance 20cm between the radiator & your body.
FCC NOTICE:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of
the following measures:
●Reorient or relocate the receiving antenna.
●Increase the separation between the equipment and receiver.
●Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
●Consult the dealer or an experienced radio/TV technician for help.
FCC WARNING:
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
IMPORTANT SAFETY INSTRUCTIONS
Before using the unit, be sure to read all operating instruction carefully, please
note that these are general precautions and may not pertain to your unit. For
example, this unit may not have the capability to be connected to an outdoor
antenna.
1. Read these instructions
All the safety and operating instructions should be read before the appliance is
operated.
2. Keep these instructions
The safety and operating instructions should be kept for future reference.
3. Heed all warnings
All warnings on the appliance and in the operating instructions should be
adhered to.
4. Follow all instructions
All operation and use instructions should be followed.
5. Do not use this apparatus near water
The appliance should not be used near water; for example, near a bath tub,
washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming
pool.
6. Clean only with dry cloth
The appliance should be cleaned only as recommended by the manufacturer.
7. Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
Slots and openings in the cabinet and in the back or bottom are provided for
ventilation, to ensure reliable operation of the product and to protect it from
overheating. These openings must not be blocked or covered. The openings
should never be blocked by placing the product on a bed, sofa, rug, or similar
surface. This product should never be placed near or over a radiator or heat
source. This product should not be placed in a built-in installation, such as a
bookcase or rack unless proper ventilation is provided or the manufacturer’s
instructions have been adhered to.
8. Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type
plug. A polarized plug has two blades with one wider than the other. A
grounding type plug has two blades and a third grounding prong. The
wide or the third prong are provided for your safety. If the provided plug
does not fit into your outlet, consult an electrician for replacement of the
obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly
at plugs, convenience receptacles, and the point where they exit from the
apparatus.
11. Only use attachments / accessories specified by the manufacturer.
12. Use only with a cart, stand, tripod, bracket, or table
specified by the manufacturer, or sold with the apparatus.
When a cart is used, use caution when moving the
cart/apparatus combination to avoid injury
from tip-over.
An appliance and cart combination should be moved with care. Quick stop,
excessive fore and uneven surfaces may cause the appliance and cart
combination to overturn.
13. Unplug this apparatus during lightning storms or when unused for
long periods of time.
To protect your product from a lightning storm, or when it is left unattended and
unused for long periods of time, unplug it from the wall outlet and disconnect
the antenna or cable system. This will prevent damage to the product due to
lightning and power-line surges.
14. Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way, such as
power-supply cord or plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been exposed to rain or
moisture, does not operate normally, or has been dropped.
15. Power source
This product should be operated only from the type of power source indicated
on the marking label. If you are not sure of the type of power supply to your
home, consult your appliance dealer or local power company. For products
intended to operate from battery power, or other source, refer to the operation
instructions.
16. Power lines
An outside antenna system should not be located in the vicinity of overhead
power lines or other electric light or power circuits, or where it can fall into such
power lines or circuits. When installing an outside antenna system, extreme
care should be taken to keep from touching such power lines or circuits as
contact with them might be fatal.
17. Overloading
Do not overload wall outlets and extension cords as this can result in a risk of
fire or electric shock.
18. Object and liquid entry
Never push objects of any kind into the product through openings as they may
touch dangerous voltage points or short out parts that could result in fire or
electric shock. Never spill or spray any type of liquid on the product.
19. Service
Do not attempt to service this product yourself as opening or removing covers
may expose you to dangerous voltage or other hazards. Refer all servicing to
qualified service personnel.
20. Replacement parts
When replacement parts are required, be sure the service technician uses
replacement parts specified by the manufacturer or those that have the same
characteristics as the original parts. Unauthorized substitutions may result in
fire or electric shock or other hazards.
21. Safety check
Upon completion of any service or repairs to this product, ask the service
technician to perform safety checks to determine that the product is in proper
operating condition.
22. Damage requiring service
Unplug this product from the wall outlet and refer service to qualified service
personnel under the following conditions.
a)When the power- supply cord or plug is damaged.
b)If liquid has been spilled or objects have fallen into the product.
c)If the product has been exposed to rain or water.
d)If the product does not operate normally by following the operating
instructions. Adjust only those controls that are covered by the operating
instructions, as an adjustment of other controls may result in damage and will
require extensive work by a qualified technician to restore the product to its
normal operation.
e)If the product has been dropped or the cabinet has been damaged.
f)When the product exhibits a distinct change in performance- this indicates a
need for service.
BE SURE TO READ AND KEEP THIS INSTRUCTIONS
CARE AND OPERATION:
The lamp speaker is designed to operate in an average room temperature of 22-25℃,
make sure the lamp speaker is at room temperature before starting. Always operate the
unit on a firm, flat and stationary surface. Do not operate the lamp speaker on any warm
or hot surfaces.
CAUTION:
●The lamp speaker should never be operated for more than 24 hours at a time. If
operated for more than 24 hours, the base can get deformed from heat.
●Do not add any fluid or solids to your lamp. The air space at the top of the lamp speaker
has been provided to allow for expansion.
●Do not place the lamp speaker near sources of heat or cold such as heat and air
conditioning vents. Always operate the lamp speaker only at room temperature. Operation
or storage of lamp speaker in direct sunlight will cause colors to fade.
●The lamp speaker operates at a very high temperature and the vessel is made of glass.
Operate out of the reach of the children and pets.
CAUTION:
●Do not operate the lamp speaker with any other bulb except for the one provided by this
manufacturer’s customer service.
●Do not leave the lamp speaker unattended. Do not run the lamp speaker while sleeping,
as this is novelty item and it is not intended to be used as night light.
●Do not replace with unauthorized bulb in this lamp speaker.
●The lamp and speaker base will be hot while in use and after the unit has been turned
off/unplugged. Do not touch the lamp speaker or the bulb while it is on.
●Keep it out of the reach of the children and pets.
●While lamp speaker is in operation, be sure not to move or shake it in order to avoid
permanently damaging the lamp speaker. The lamp speaker should never be heated by
any other means, nor should it be cooled artificially. Do not use when the glass is cracked
or damaged.
●The space on the top of the lamp speaker is provided for expansion. Do not break the
seal of the cap to fill it with liquid or solid. Breaking the seal will void your warranty and ruin
the product.
●If the external flexible cable or cord of the base is damaged, do not attempt to replace it
yourself. It should be replaced by the manufacturer, service agent or a similar qualified
person in order to avoid a hazard.
DANGER!
●Do not replace with unauthorized bulb in this lamp speaker.
●The lamp and speaker base will be hot while in use and after the unit has been turned
off/unplugged. Do not touch the lamp speaker or the bulb while it is on.
●Keep it out of the reach of the children and pets.
●Do not take the glass vessel out although it can be taken out from
the speaker base!
●Do not put your fingers into the bulb cave, it is very hot, the
temperature can reach up to above 100 ℃ .
●Do not stare at the bulb cave, it may hurt your eyes.
●Unplugged the speaker if you want to take out the glass vessel,
and wait until the base, bulb cave and glass vessel get cold.
Vessel Cap
Glass Vessel
(Very hot when in
use or after use)
Bulb Cave
(Very hot when in
use or after use)
Speaker Base
(Very hot when in
use or after use)
ON
OF F
PRODUCT OVERVIEW
1.
2.
3.
4.
5.
6.
7.
8.
Vessel cap
Glass vessel
Volume up/next button
Volume down/previous button
Power on/off, play/pause button
Bluetooth indicator
Speaker
Power switch
NOTE:
Be careful!
The glass vessel may be fragile!
ON
OF F
BLUETOOTH OPERATION
1. Plug the power plug into the wall outlet with power supply 120V~,60Hz.
2. Push the power switch on AC cord to "ON" position.
3. Press and hold the
button on the speaker for seconds to power on the unit.
The Bluetooth indictor will illuminate and flash blue, now the speaker is in
pairing mode.
4. Activate the Bluetooth on external Bluetooth device and try to search the speaker,
the pairing name "ITSBL-509 " will appear on pairing list, select it and try
connection.
5. The speaker will send a tone and the Bluetooth indicator will stay lit after
successful connection.
6. The speaker will automatically pair and connect with the last paired device if both
the device and the speaker are activated and in range.
During playing:
Press the
button to pause, press it again to play again.
Press the
button to skip to next track.
Press the
button to skip to previous track.
Press and hold the
button to increase volume.
Press and hold the
button to decrease volume.
TROUBLESHOOTING GUIDE
Check the following before requesting service:
SYMPTOM
Can’t power on
No sound or
sound weak
Sound
distortion
BT not
f unctioning
POSSIBLE CAUSE
Power switch is on"OFF" position
POSSIBLE SOLUTION
Push the power switch to "ON" position.
Volume level of the unit is low
Press and hold the
increase volume
button to
Volume level of the paired/
connected device is in low level
Rise the volume level of the paired/
connected device
Volume level of the unit is high
Press and hold the
decrease volume
Volume level of the paired/
connected device too high
Reduce the volume level of the paired/
connected device
The external BT device had
NOT paired to the unit
Pair the external BT device to the unit
The external BT device too
far from the unit
Place the external BT device close to
the unit
button to
SPECIFICATIONS
Power source.................................................................................AC120V~;60Hz
Audio output..................................................................................................1X4W
Bluetooth working range..........................................(tested in open area)33ft(10m)
Bulb life........................................................................................................2000Hs
Bulb flux..........................................................................................................90 lm
Bulb power.......................................................................................................20W
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE
is a trademark on a registered trademark of Bluetooth
SIG Inc. All other trademarks and trade names are
those of their respective owners.
10
WARRANTY
11

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Create Date                     : 2016:12:17 17:18:16+08:00
Creator                         : Adobe Illustrator CS6 (Windows)
Modify Date                     : 2017:03:09 17:15:29+08:00
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Format                          : application/pdf
Title                           : 未标题-1
Metadata Date                   : 2017:03:09 17:15:29+08:00
Creator Tool                    : Adobe Illustrator CS6 (Windows)
Thumbnail Width                 : 256
Thumbnail Height                : 256
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 2593 bytes, use -b option to extract)
Instance ID                     : uuid:c6ad8708-832a-4bf7-8002-18e80a2a4f5e
Document ID                     : xmp.did:71ED92BA39C4E611A915F3AE14570C9A
Original Document ID            : uuid:5D20892493BFDB11914A8590D31508C8
Rendition Class                 : proof:pdf
Derived From Instance ID        : uuid:2304d5ad-13c6-af41-8646-360ef867abec
Derived From Document ID        : xmp.did:0980117407206811822A897E387FE54C
Derived From Original Document ID: uuid:5D20892493BFDB11914A8590D31508C8
Derived From Rendition Class    : proof:pdf
History Action                  : saved
History Instance ID             : xmp.iid:71ED92BA39C4E611A915F3AE14570C9A
History When                    : 2016:12:17 17:18:10+08:00
History Software Agent          : Adobe Illustrator CS6 (Windows)
History Changed                 : /
Startup Profile                 : Print
Has Visible Overprint           : False
Has Visible Transparency        : False
N Pages                         : 1
Max Page Size W                 : 148.498429
Max Page Size H                 : 210.001652
Max Page Size Unit              : Millimeters
Swatch Groups Group Name        : 明亮
Swatch Groups Group Type        : 1
Swatch Groups Colorants Swatch Name: C=60 M=90 Y=0 K=0
Swatch Groups Colorants Mode    : CMYK
Swatch Groups Colorants Type    : PROCESS
Swatch Groups Colorants Cyan    : 60.000002
Swatch Groups Colorants Magenta : 90.000004
Swatch Groups Colorants Yellow  : 0.003099
Swatch Groups Colorants Black   : 0.003099
Producer                        : Adobe PDF library 10.01
Page Count                      : 11
For                             : Administrator,
Bounding Box                    : 0 0 0 0
Container Version               : 11
Creator Version                 : 16
Image Height                    : 0
Image Width                     : 0
Image Size                      : 0x0
Megapixels                      : 0.000000

EXIF Metadata provided by EXIF.tools