Junlan Electronic CAW03012 SAMSUNG POWERED WIFI SPEAKER DOCK User Manual
Shenzhen Junlan Electronic Ltd SAMSUNG POWERED WIFI SPEAKER DOCK
Contents
- 1. User Manual
- 2. User manual
User manual
SAMSUNG POWERED WIFI SPEAKER DOCK MODEL:CAW-03012 PLEASE READ THIS INSTRUCTION MANUAL CAREFULLY BEFORE OPERATION AND KEEP IT FOR FUTURE REFERENCE IMPORTANT SAFETY INSTRUCTIONS CAUTION: TO REDUCE THE RISK.OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK}. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. 'llle llghll119 llah wMI envwhead aymbol, wMlln on 9qul ....ral lr1ilngll, 19 lnl8ndld tD llort u.. to the p....nce tlf unli,sul•..,•..,... voltmgo" within th• product._ encl....,,.., thet moy be of autllclont mau- to conetlluta • rtek of el-. Th• """lomellon paint within mn oquHat.nl tr1ongl• I• Int. to a1..1 the uHr lo th• pruenN of Important operatln9 and m•int•nuc• (1•n,ici11g) inatruction in the literatura _.....,.... 111e_1..._. FCC Warnings \/\ARNING:Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Cl ass B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radiofTV technician for help. FCC NOTICE: To assure continued compliance, follow the attached installation instructions and use only shielded cables when connecting to other devices. Modifications not authorized by the manufacturer may void user's authority to operate this device. Befvre using the unit, be sure t.o rad all operating instructions carefully. Please note that th- are general precautions and may not pertain to your unit. For example, this unit may not have the capability to be connected to an outdoor antenna. 1. Read these instructions All the safety and operaling Instructions should be read before tha product Is operated. 2. Keep these instructions Tha salBly and operating lnstrudlons should ba nitalnad for future reference. 3. Heed aH warning All warnings on the product and in the operating insll\Jctions $hould be adhered to. 4. Follow all Instructions All operating and use instructions should be followed. 5. Do not use this apparatus near water Do not use the product near water and noisture, for example: near a bathtub.washbowl, kithan sink or laundiy tub; in a wet basement; or near a swimming pool. 6. Clean only with dry cloth Unplug this product from the wall ouUat before cleaning. Do not use llquld cleaners or aerosol cleaners. Use a diy cloth for cleaning. 1. Do not block any ventllatlon openlnp. Install In accordance with the manufactu,er's instructions. Slots and openings in the cabinet and in the back or bottom are provided for ventilation, to ensure raliabla operation of !ha product and to protect It from overheating. These openings must not be blocked or covered. The openings should navar be blocked by placing the product on a bed, sofa, rug or other similar surface. this product should nBVBr ba placed near or over a radiator or heat source. This product should not be placed In a bullUn lnstallatlon such as a bookcase or rack unless proper ventilation is provided or the manufacturer's Instructions have been adhered to. 8. Do not Install near any heat soun::es such as radiators, heat registers, stoves, or other apparatus pncludln1 amplifters) that produce heat. 9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. a grounding type plug has two blades and a third grounding prong. the wide blade or the third pron1 are provided for your safety. ifthe provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10. Protect the power cord from being walked on or pinched particularly at plup,convenience receptacles, and the point whera they exit from the apparatus. 11. Only use attachments/accessories specified by the manufacturer. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. FCC IO:OKU-CAW03012. 3 LOCATION OF CONTROLS MAIN UNIT: TOP VIEW FRONT VIEW REAR VIEW 10 11 1. Play/Pause (WiFi Pairing) Button 12 13 8. AUX IN Indicator 2. Previous (Volume Down) Button 9. SD/USB Indicator 3. Next (Volume Up) Button 10. SD Card Slot 4. Mode (Power On/Off) Button 5. Battery Indicator 11. AUX IN Jack 6. WiFi Indicator 12. USB Port 7. Bluetooth Indicator 13. DC IN Jack Specification Power supply.........................................................................................9.5V 2.2A Audio output...................................................................................................6WX2+10W (RMS) Running Time.......................................................................around 3.2 hours(with 50% volume) Recharging Time..................................................................................................around 3 hours Bluetooth working range..................................................................32 feet (tested in open area) Bluetooth version...................................................................................................................V4.1 WiFi working range...............................................................................................approx. 96 feet Accessories: 1 X AC/DC Adapter for the main unit (9.5V, 2.2A ) 1 X 3.5mm Stereo AUX IN Cable 1 X Instruction Manual RECHARGING During playing, press the battery indicator button to display the battery level. Battery Indicator Button The battery indicator will flash blue during low battery level. Battery Indicator Using the supplied Adapter to recharge through the DC IN jack at the rear of the main unit. The red indicator will light up when charging, it will turn blue after fully charged. Battery Indicator BLUETOOTH OPERATION Pairing the speaker with Bluetooth devices (phone or music device) 1. Press and hold the M button to turn on the unit. 2. Press the M button repeatedly to turn to Bluetooth mode, the Bluetooth indicator on front of the unit will light up and blink, and a tone sounds, now it is entering pairing mode. 3. Activate the Bluetooth function on your Bluetooth device (phone or music device). Please refer to the manufacturer’s instructions of your device. 4. Once you have activated Bluetooth on your device, select the speaker “CAW-03012” from the list of available Bluetooth devices. 5. Once paired successfully, Bluetooth indicator will stop blinking and a tone will be heard. 6. If pairing is unsuccessful, turn off the speaker first and then re-pair following above steps. 7. Once you have paired the speaker with a device, the speaker will remember this device and will pair automatically when the device’s Bluetooth is activated and in range. 8. If you want to pair it with a new device, press and hold the current pairing. button to disconnect the During playing: A:Press the or button to skip to previous or next track. B:Press the button to pause, press again to resume playing. C:Press and hold the or button to decrease or increase the volume. NOTE: During playing, please do not insert the AUX IN cable into the AUX IN Jack, or it will switch to AUX IN mode, the AUX IN indicator will light up, it will switch to WiFi mode when unplug the AUX IN cable. AUX IN OPERATION 1. Connected the external audio device to the unit by an audio connection cable with 3.5mm stereo mini jacks as: ~ Insert one end to the Phone; Line Out or AUX Out Jack on the external audio device. ~ Insert the other end to the AUX IN jack on the rear of the main unit. MP3 Mobile Phone Connect to the Phones; AUX Out; Line Out Jack of the external devices (Such like MP3 Player; cell phones; iPod/iPad ... etc) To AUX IN jack on the rear of the unit (Audio Connection Cable supplied) 2. Press and hold the M button to turn on the unit. 3. Press the M button repeatedly to turn to AUX IN mode, the AUX IN indicator on front of the unit will light up. 4. Play music as usual on your external device. NOTE: It will switch to AUX IN mode when AUX IN cable plugged into the AUX IN jack in any other modes( such as WiFi, Bluetooth, USB, SD, OPTICAL). USB/Sd OPERATION NOTE: Only the USB or SD Card inserted to the unit can the USB/SD mode be selected. The latter one inserted to the unit will be played first. REAR VIEW OF THE UNIT USB Sd 1. Insert the USB device or SD memory card into the USB port/card slot as shown above figure. 2. Press and hold the M button to turn on the unit. 3. Press the M button repeatedly to turn to USB/SD mode, the USB/SD mode indicator on front of the unit will light up. 4. The unit will automatically play the track after a few seconds. During playing: A:Press the or button to skip to previous or next track. B:Press the button to pause, press again to resume playing. C:Press and hold the or button to decrease or increase the volume. Setup PREPARATION Before connecting the mobile phone with the unit, search the VARO WIFI CONTROLLER from network by the following website: Android: http://fir.im/bvaro iOS: http://fir.im/varo VARO WIFI CONTROLLER Fig. 1 Download and install the App and set the language of mobile phone to English. The App icon will appear like the Fig.1 after successful installation. NOTE:Please make sure that there is no AUX IN cable plugged in AUX IN jack. CONNECT THE PHONE WITH THE UNIT Press and hold the M button to turn on the unit, the WiFi indicator will light up and blink. Activate the WiFi on the phone, search and connect the router (WiFi Source), Tap VARO WIFI CONTROLLER icon to activate and it will try to search the devices (Fig.A). Select the VIBE on Fig.B and tap CONNECT SPEAKER, tap Continue on Fig.C. Read the tips on Fig.D and tap NEXT. Fig.A Fig.B Fig.C 10 Fig.D Setup Select the same WiFi (router source) as the phone connected and tap LOGIN on Fig.E. Press and hold the button on the unit as instructed on Fig.F and tap Next to continue. Wait unit the progress bar reach 100% as instructed on Fig.G. Select to add another speaker or play music after successful connection as Fig.H. Fig.E Fig.G Fig.F Fig.H NOTE: There will be voice tone sounding during connection procedure like the following: " Searching for Wifi connection " " Waiting for Wifi connection " " Wifi connected " Using the screen instructions and the voice tone to make connection and operations. After connection completed, it will give instructions like Fig.I and tap Next to continue. Read the onscreen instructions on Fig.J, Fig.K, Fig.L and continue. Fig.I Fig.J Fig.K 11 Fig.L Setup Wait unit the progress bar reach 100% as instructed on Fig.G. If it displays like Fig.M, tap Try Again to repeate the above stated steps to reconnect. If it does not fail to connect, continue to set the SPEAKER LOCATION, tap Custom...column on Fig.N to rename the speaker location. Input the name and confirm on Fig.O. Fig.M Fig.O Fig.N 12 Glance at The Function of Each Icon On SPEAKER CONTROLS page (Fig.P), tap to return to home page. Tap Rename, browse the Speaker Info and Preset Content. Tap to Add a New Speaker to add more speaker as onscreen instructions. Tap Pause All to pause playing on all speakers, tap again to resume play all speakers. Tap volume level bar to adjust the volume, tap STEREO icon to set to LEFT channel or RIGHT channel. Speaker Info Page Home Page Fig.P on SPEAKER CONTROLS page to set solo or multi mode. Tap as onscreen instructions like Fig.Q. Drag down slowly from the top of the SPEAKER CONTROLS page window until the upward arrow head appears then release to update the SPEAKER CONTROLS page, if there is existing connected speaker, it will appear on the SPEAKER CONTROLS page. See Fig.R. Fig.Q. Fig.R. 13 Guide of Using App Functions On Home Page, tap Search to search the desired music shown on the below pictures. Home Page On Home Page, tap Favorites to to listen your favorite music, on music playing page, icon to add songs to Favorites. tap the icon to add songs to My Playlist, tap the On Home Page, tap My Music to listen from native music, My Playlist or Recently Played music. On Home Page, tap TuneIn to listen online radio, or other programes. On Home Page, tap iHeartRadio and sign up to listen iHeart radio. Favorites TuneIn My Music 14 iHeart Guide of Using App Functions On Home Page, tap Sportify to listen music. On Home Page, tap Add More Services to add the desired online programs platform. Tap Line in, Bluetooth, USB Devices or Optical to switch function mode on Fig.S. Tap Setings to check the Version and Feedback information on Fig.T. Sportify Fig.S Fig.T NOTE: Other detail functions like adding, cancel, delete, manage...customize, etc. can be operated according to the onscreen instructions. 15 FAQ Q: Can't stream music to the device? A: Make sure your phone or PAD are in the same Wi-Fi network as your device. If you use 3rd. music APP, please check if the APP supports Airplay, DLNA or Qplay protocol. Q: Can the APP system be controlled independently by two different phones/tablets at the same time or can it only be controlled with one? A:It can be controlled by different phones / tablets. Q: Can I play my MP3 music collection on the iphone? A: Yes. You just have to install the controller app on the iPhone. In the app, you will see an option to play music on "This iPhone". Q: What kinds of music format does it support? A: Most of the format is available. Such as MP3, WMA, AAC (AAC+), Apple lossless, FLAC, APE, etc. Q:Does it support multi-room playback? A: Yes. Playback the same song in multiple speakers with minimal latency (less than 5 ms) or different songs in multiple speakers with one App. Q: Does the wireless transmission have loss of sound quality? A:No. You mobile devices or other devices just send control instructions, and the adapter will download songs metadata, decoding it and then playback in local speaker, so there is no lose of the music quality through wireless transmission. Q: Does it support R&L channel? A: Yes, this is supported. You can find the sign in APP. 16
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Author : Administrator Create Date : 2013:11:15 14:12:29+08:00 Modify Date : 2016:09:08 13:41:53+08:00 Has XFA : No XMP Toolkit : Adobe XMP Core 5.6-c015 81.157285, 2014/12/12-00:43:15 Producer : Acrobat Distiller 7.0 (Windows) Creator Tool : PScript5.dll Version 5.2.2 Metadata Date : 2016:09:08 13:41:53+08:00 Format : application/pdf Title : C:\Documents and Settings\Administrator\桌面\复件 CMA 3559 BT Speaker JL 131115.doc Creator : Administrator Document ID : uuid:7721dc3d-4cc8-4ba4-8774-e1e23f9d9bf9 Instance ID : uuid:f4bd3149-be91-4852-9ab7-08a85b33fd2f History Action : editedScannedDoc, editedScannedDoc History When : 2016:09:06 17:01:30+08:00, 2016:09:08 13:41:53+08:00 History Parameters : Page:2, Page:2 Page Count : 16EXIF Metadata provided by EXIF.tools