Junlan Electronic CAW37051 Wi-Fi&Bluetooth; Speaker with Amazon Alexa Voice Control User Manual 1
Shenzhen Junlan Electronic Ltd Wi-Fi&Bluetooth; Speaker with Amazon Alexa Voice Control 1
User Manual
2
FCCWARNING:
To assure continued operation, follow the attached installation instructions and
use only shield cables when connecting to other devices. Changes or
modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
MODE
WPS
ON OFF
AUX IN
DC 5V
TOP VIEW
REAR VIEW
1
2
3
4
5
6
7
8
9
10
11
12
1. LED Light Ring
2. Play/Pause,WPS Button
3. Previous/Volume Down Button
4. Next/Volume Up Button
5. MODE Button
7. Mode Indicator
8. Built-in Microphone
9. Charge Indicator
10. ON/OFF Switch
12. AUX IN Jack
11. DC IN Jack
6. Voice Control Button
PROdUCT OvERvIEW
3
POWER SOURCE:
There is a built in Li-ion rechargeable battery, recharge it if the battery is low.
1. Connect the Micro USB Plug from the supplied USB Connection Cable to the Micro
USB Port on the rear of unit.
2. Connect the full sized USB Plug from the supplied USB Connection Cable to the
USB Port on the USB Charger (During
When finished, it will turn off).
AUX IN:
To listen from an external Audio Player such as a MP3 Player, Discman …etc.
charging, the charge indicator on the top of
unit will turn RED,
1. Connect one end of the Audio Connection Cable to the AUX Out/Line Out/Phone
Jack on the external Audio Player.
2. Connect the other end of the cable to the AUX IN Jack on the rear of the unit.
3. Play the music on the connected Player as usual.
through the microphone on
Switch on the unit, wait the mode indicator blinks green only, press the MODE
button repeatedly until the Mode Indicator will turn INDIGO.
4
NOTES:
Your battery will last longer if you're following these simple guidelines for charging
and storing:
A.
Before first time use, charge it approximately
hours until the unit is fully
charged.
B.
Recharge and store the unit within the temperature range of 5°C~35°C
(40°F~95°F).
C.
Do not charge longer than 24 hours. Excessive charging or running the
unit until battery fully drains will damage battery. Battery life will be extended
if you keep the battery fully charged.
D.
Battery life naturally shortens slowly over time.
E.
The rechargeable battery incorporated in this product is not user
replaceable.
4
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and
operated with minimum distance between 20cm the radiator your body: Use only the supplied
antenna.
The App icon will appear as the figure on right after successful installation.
APP dOWNLOAd ANd INSTALLATION
MUzO Player
Download the MUZO Player from Apple App store for iOS devies.
Download MUZO Player from Google Play store for Android devices.
SETUP
The following operation base on iOS system. The operation of Android is similar.
NOTE:
CONNECTION
desired WiFi network (router).
Connect your iOS or Android device to the
2. Turn on the WiFi on your iOS or Android device(smart phone or tablet with WiFi function),
1. Switch on the unit, the mode indicator will blink blue and green for a few seconds, wait
until it blinks green only, now it is WiFi mode.
Read the screen instructions and press the to continue.
Searching for MUZO Wireless
Hi-Fi System.....
Please make sure your device is
powered up
Your phone is connected to WF9,
same network
"MUZO Cobblestone" isn't setup yet?
Wi-Fi Setup Wizard
please make sure your device is
connected to the
Wi-Fi Setup Wizard
3. Click the MUZO Player icon on your iOS or Android device.
It will start to scan and search the available speaker automatically.
6
to continue.
WIFI INFO
1Please enter Wi-Fi password:
Next
Wi-Fi: XXXX
<
Next
Password: Please enter Wi-Fi password
Press the
4. Inputing the WiFi password to make the speaker to connect to WiFi network(router),
Press the Next
<
Press the WPS key on device
WPS
PRESS TO ENTER SETUP M...
to put the device into network
setup mode.
Then click the "Next" button to
Next
2
5. on top of the speaker.
Press and hold the WPS button
button on your MUZO Player to continue.
7
during the connecting process.
6. There will be voice instructing like " searching for WiFi connection", " waiting for WiFi
connection"
PLEASE WAIT
3Wait for device to be
<
Cancel
connected to Wi-Fi...
Don't operate device during Wi-Fi setup.
Please wait for compltion of setup
patiently. It's usually finished in 60
seconds.
If you hear voice prompt for erro message.
please go back and retry
CONNECTED
Device is connected to XXXX
successfully
Current Wi-Fi strength of device:100%
Next
If connection fails, please try again and repeat the above connecting steps.
7. When the speaker is connected to the Wi-Fi (router) successfully, and the voice
sounds "Wi-Fi connected", the Indicator on top of the speaker will stay lit.
8
D
D
Search
Favorites
My music
TuneIn
iHeartRadio
Line In
Settings
Touch to search
Touch to listen the
collected favorite songs
Touch to listen native
songs
Touch to listen radio,
talks, sports, etc.
Touch to log on
Touch to switch to line
in mode
professional music
platform
Touch to log on
professional online
radio platform
online
songs
Touch to check version and feedback
TIDAL
Sportify
Touch to listen from
online songs platform
Bluetooth
Touch to switch to
Bluetooth mode
HOME PAGE INTERFACE
Click the " MUZO " on screen to enter homepage, operate as below instructions and the
screen instructions. Some platforms may need registration.
Touch to log in Amazon
Touch to add more
service
Amazon
9
1. Tap "Spotify" on MUZO homepage.
2. Input your account and password to log in.
3. Open the Spotify on your phone, tablet or PC, and play any song.
4. Tap the connect icon .
5. Pick your device from the list.
Before use, you have to create an spotify premium account for log in.
Before use, you have to create an iHeartradio account for log in.
Before use, you have to create a TIDAL account for log in.
1. Tap "iHeartradio" on MUZO homepage.
2. Input your account and password to log in.
3. Select the desired song and play.
1. Tap "TIDAL" on MUZO homepage.
2. Input your account and password to log in.
3. Select the desired song and play.
10
Licenses
The Spotify Software is subject to third party licenses found here:
www.spotify.com/connect/third-party-licenses.
SPOTIFY OPERATION
IHEARTRADIO OPERATION
TIDAL OPERATION
1. Touch on homepage, the log in window will pop up, input your account
AMAZON LINK PLAY ALEXA VOICE CONTROL
Before using Amazon linkplay Alexa voice control function, you must get an Amazon prime
account, creat an account on Amazon website.
Amazon
and password to log in.
2. If you have logged in before, the figures below will appear and operate as the tips.
3. Press the button on top of the speaker, then you can speak to it, the speaker will
respond to your question or requiement (command).
For example:
Press the button then ask the speaker, what's the weather like today?
The speaker will reply: the weather is not so cold.
Press the button then ask the speaker again, what's the time now?
The speaker will reply: it is 8 o'clock now.
Press the button then tell the speaker, play music.
The speaker will reply: here is the station we found. the music will be played.
4. Before asking or requiring the speaker, press the button first. Except the examples
stated above, you may ask the speaker to do more things desired.
Amazon login successful
Next
11
12
TROUBLESHOOTING
Check the following before requesting service:
SYMPTOM POSSIBLE CAUSE POSSIBLE SOLUTION
Can’t power on Built in battery drained Recharge the battery
Volume level of paired/connected device
is in low level
Rise the volume level of the
paired/connected device
Volume level of the connected/paired
device too high
Reduce the volume level of the
connected/paired device
BT not
unctioning
The external BT device had NOT paired to
the unit
Pair the external BT device to the
unit
The external BT device too far from the
unit
Place the external BT device
close to the unit
SPECIFICATTIONS
Power source:Built-in DC 3.7V, 2200mAh (7.4WH) rechargeable Li-ion Battery,
Recharge by DC 5V through Micro USB Port
BT Version: 4.1
BT Operation Distance: 32 Feet in open area
PACKAGE INCLUDES
1 x Us ’s Manual
1 x USB Connection Cable (For Charging Only)
1 x Audio Connection Cables with 3.5mm Plugs
SPECIFICATIONS AND ACCESSORIES ARE SUBJECT TO CHANGE
WITHOUT NOTICE
er
f
No sound or
sound weak
Sound
distortion
Wifi Operation Distance: Feet in open area96about
about
LIMITED WARRANTY
NAXA LIMITED WARRANTY (“Warranty”) — For Product Categories Listed in Chart Below (as applicable, “Product”).
Before returning your Product for service under this Warranty, please read the instruction manual carefully and visit our website at
www.naxa.com for product updates and extended support documentation (e.g., Frequently Asked Questions, Common
Troubleshooting Guides, etc …). If you are still having trouble with your Product, please contact Naxa Customer Support.
Warning: Some Products may contain components that are small enough to be swallowed. Please keep out of reach of children.
Subject to the terms and conditions herein, Naxa Electronics, Inc. (herein after called “Naxa”) warrants to the original purchaser of the
Product (“Customer”) that the Product will be free from defects in material or workmanship under normal, non-commercial use
(“Defects”) for the applicable Warranty Period listed below.
Warranty Period encompasses separate “Coverage Periods” for Parts and Labor as listed in the table below. Each Coverage Period
begins from the original date of Customer purchase. If Customer returns a defective Product (or any component thereof) during the
applicable Coverage Period, Naxa will, at its option: (1) repair the Product (or any component thereof) or; (2) replace the Product (or
any component thereof) with a new or refurbished Product (or any component thereof), in either case free of charge to Customer for
Parts and/or Labor during the specified Coverage Period only, and excluding the applicable shipping charges noted below for which the
Customer is responsible. The foregoing states the Customer’s exclusive remedy and Naxa’s sole liability for breach of the limited
warranty contained herein.
This warranty specifically excludes any product that has been subject to or has defects resulting from:(a)any neglect or misuse by a
Customer; (b) an accident, improper application, violation of operating instructions for the Product, or any other Customer-induced
damage; (c) the alteration or removal of any Product serial number; (d) any modification or repair to Product (or any component
thereof) by any party other than Naxa or a party authorized in writing by Naxa; (e) any damage to Product due to power surges,
incorrect electrical voltage, misconnection to any device, or malfunction of any device used with the Product (or, as applicable, any
component thereof); (f) cosmetic damage to the Product caused by normal wear and tear; (g) shipping damage that occurs while the
Product is in transit; (h) damage caused by heat sources, sunlight, electromagnetic conditions, or other climatic conditions; or (i) any
acts of God. Refurbished products are not covered by this Warranty.
Product is sold to Customer for personal, non-commercial use only. Product is not warranted for commercial or rental use. In addition,
Product is not warranted against failure, and should not be used by Customer for any application where there is a risk that any data
stored on Product will be breached or otherwise compromised, or the data stored on Product is relied upon for medical or lifesaving
applications. Naxa disclaims any Warranty for any of the foregoing uses to the fullest extent permitted by law. Customer assumes any
and all risks associated with such uses of Product, and agrees to indemnify Naxa for any damages claimed for such uses.
EXCEPT FOR THE EXPRESS WARRANTIES STATED ABOVE AND TO THE MAXIMUM EXTENT PERMITTED BY LAW, ALL PRODUCTS ARE
PROVIDED “AS IS”, AND NAXA DISCLAIMS ALL OTHER WARRANTIES, INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTY OF (I)
MERCHANTABILITY; (II) FITNESS FOR A PARTICULAR PURPOSE, OR; (III) NON-INFRINGEMENT OF THIRD PARTY RIGHTS. TO THE
MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT WILL NAXA BE LIABLE TO CUSTOMER OR ANY THIRD PARTY FOR
ANY INDIRECT, SPECIAL, INCIDENTAL, CONSEQUENTIAL, EXEMPLARY OR PUNITIVE DAMAGES, INCLUDING, WITHOUT LIMITATION, ANY
LOST PROFITS OR REVENUES, LOSS OR INACCURACY OF ANY DATA, OR COST OF SUBSTITUTE GOODS, REGARDLESS OF THE THEORY OF
LIABILITY (INCLUDING NEGLIGENCE) AND EVEN IF NAXA HAS BEEN ADVISED OF THE POSSBILITY OF SUCH DAMAGES, NAXA’S
AGGREGATE LIABILITY TO CUSTOMER FOR ACTUAL DIRECT DAMAGES FOR ANY CAUSE WHATSOEVER SHALL BE LIMITED TO THE
CUMULATIVE PRODUCT FEES PAID BY THAT CUSTOMER FOR THE PRODUCTS CAUSING THE DAMAGES, IF ANY.
This Warranty gives Customer specific rights, and Customer may also have other rights that vary from jurisdiction to jurisdiction.
All warranty returns must have an RMA number provided by Naxa Customer Support. An RMA number can be obtained by contacting
Naxa Customer Support by phone, email, or online by using the RMA ticketing system at www.naxa.com.
Naxa Electronics, Inc.
RMA Processing / Customer Support
2320 E. 49th St., Vernon, CA 90058
Email: support@naxa.com
Phone: (866) 411-6292
Web: www.naxa.com
Hours of Operation:
Monday – Friday
10:00 AM to 5:00 PM PST