Junlan Electronic CAW37051 Wi-Fi&Bluetooth; Speaker with Amazon Alexa Voice Control User Manual 1

Download:
Mirror Download [FCC.gov]
Document ID	3339644
Application ID	XKP/h5pNpRyetmXlvaex5w==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	109.95kB (1374318 bits)
Date Submitted	2017-03-30 00:00:00
Date Available	2017-03-30 00:00:00
Creation Date	2016-12-17 17:18:16
Producing Software	Adobe PDF library 10.01
Document Lastmod	2017-03-28 14:59:53
Document Title	未标题-1
Document Creator	Adobe Illustrator CS6 (Windows)

FCC WARNING:
To assure continued operation, follow the attached installation instructions and
use only shield cables when connecting to other devices. Changes or
modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
PROdUCT OvERvIEW
TOP VIEW
WPS
MODE
REAR VIEW
10
DC 5V
ON OFF
11
AUX IN
12
7. Mode Indicator
8. Built-in Microphone
9. Charge Indicator
10. ON/OFF Switch
11. DC IN Jack
12. AUX IN Jack
1. LED Light Ring
2. Play/Pause,WPS Button
3. Previous/Volume Down Button
4. Next/Volume Up Button
5. MODE Button
6. Voice Control Button
POWER SOURCE:
There is a built in Li-ion rechargeable battery, recharge it if the battery is low.
1. Connect the Micro USB Plug from the supplied USB Connection Cable to the Micro
USB Port on the rear of unit.
2. Connect the full sized USB Plug from the supplied USB Connection Cable to the
USB Port on the USB Charger (During charging, the charge indicator on the top of
unit will turn RED, When finished, it will turn off).
NOTES:
Your battery will last longer if you're following these simple guidelines for charging
and storing:
A. Before first time use, charge it approximately 4 hours until the unit is fully charged.
B. Recharge and store the unit within the temperature range of 5°C~35°C
(40°F~95°F).
C. Do not charge longer than 24 hours. Excessive charging or running the
unit until battery fully drains will damage battery. Battery life will be extended
if you keep the battery fully charged.
D. Battery life naturally shortens slowly over time.
E. The rechargeable battery incorporated in this product is not user replaceable.
AUX IN:
To listen from an external Audio Player such as a MP3 Player, Discman …etc.
1. Connect one end of the Audio Connection Cable to the AUX Out/Line Out/Phone
Jack on the external Audio Player.
2. Connect the other end of the cable to the AUX IN Jack on the rear of the unit.
Switch on the unit, wait the mode indicator blinks green only, press the MODE
button repeatedly until the Mode Indicator will turn INDIGO.
3. Play the music on the connected Player as usual.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and
operated with minimum distance between 20cm the radiator your body: Use only the supplied
antenna.
SETUP
APP dOWNLOAd ANd INSTALLATION
Download the MUZO Player from Apple App store for iOS devies.
Download MUZO Player from Google Play store for Android devices.
The App icon will appear as the figure on right after successful installation.
MUzO Player
NOTE:
The following operation base on iOS system. The operation of Android is similar.
CONNECTION
1. Switch on the unit, the mode indicator will blink blue and green for a few seconds, wait
until it blinks green only, now it is WiFi mode.
2. Turn on the WiFi on your iOS or Android device(smart phone or tablet with WiFi function),
Connect your iOS or Android device to the desired WiFi network (router).
3. Click the MUZO Player icon on your iOS or Android device.
It will start to scan and search the available speaker automatically.
Read the screen instructions and press the
Wi-Fi Setup Wizard
Searching for MUZO Wireless
Hi-Fi System.....
Please make sure your device is
powered up
Your phone is connected to WF9,
please make sure your device is
connected to the same network
"MUZO Cobblestone" isn't setup yet?
Wi-Fi Setup Wizard
to continue.
4. Inputing the WiFi password to make the speaker to connect to WiFi network(router),
to continue.
Press the
Next
WIFI INFO
1 Please enter Wi-Fi password:
Wi-Fi: XXXX
Password: Please enter Wi-Fi password
Next
5. Press and hold the WPS button on top of the speaker.
Press the
Next
button on your MUZO Player to continue.
PRESS TO ENTER SETUP M...
2 Press the WPS key on device
to put the device into network
setup mode.
Then click the "Next" button to
WPS
Next
6. There will be voice instructing like " searching for WiFi connection", " waiting for WiFi
connection" during the connecting process.
PLEASE WAIT
3 Wait for device to be
connected to Wi-Fi...
Don't operate device during Wi-Fi setup.
Please wait for compltion of setup
patiently. It's usually finished in 60
seconds.
Cancel
If you hear voice prompt for erro message.
please go back and retry
7. When the speaker is connected to the Wi-Fi (router) successfully, and the voice
sounds "Wi-Fi connected", the Indicator on top of the speaker will stay lit.
If connection fails, please try again and repeat the above connecting steps.
CONNECTED
Device is connected to XXXX
successfully
Current Wi-Fi strength of device:100%
Next
HOME PAGE INTERFACE
Click the " MUZO " on screen to enter homepage, operate as below instructions and the
screen instructions. Some platforms may need registration.
Touch to search online
songs
Search
Touch to listen the
collected favorite songs
Favorites
Touch to listen native
songs
My music
Touch to listen radio,
talks, sports, etc.
TuneIn
Touch to log on
professional online
radio platform
iHeartRadio
Touch to log on
professional music
platform
Touch to listen from
online songs platform
Touch to log in Amazon
Sportify
TIDAL
Amazon
Touch to add more
service
Touch to switch to line
in mode
Line In
Touch to switch to
Bluetooth mode
Bluetooth
Settings
Touch to check version and feedback
SPOTIFY OPERATION
Before use, you have to create an spotify premium account for log in.
1. Tap "Spotify" on MUZO homepage.
2. Input your account and password to log in.
3. Open the Spotify on your phone, tablet or PC, and play any song.
4. Tap the connect icon
5. Pick your device from the list.
Licenses
The Spotify Software is subject to third party licenses found here:
www.spotify.com/connect/third-party-licenses.
IHEARTRADIO OPERATION
Before use, you have to create an iHeartradio account for log in.
1. Tap "iHeartradio" on MUZO homepage.
2. Input your account and password to log in.
3. Select the desired song and play.
TIDAL OPERATION
Before use, you have to create a TIDAL account for log in.
1. Tap "TIDAL" on MUZO homepage.
2. Input your account and password to log in.
3. Select the desired song and play.
10
AMAZON LINK PLAY ALEXA VOICE CONTROL
Before using Amazon linkplay Alexa voice control function, you must get an Amazon prime
account, creat an account on Amazon website.
1. Touch
Amazon on homepage, the log in window will pop up, input your account
and password to log in.
2. If you have logged in before, the figures below will appear and operate as the tips.
Amazon login successful
Next
3. Press the
button on top of the speaker, then you can speak to it, the speaker will
respond to your question or requiement (command).
For example:
Press the
button then ask the speaker, what's the weather like today?
The speaker will reply: the weather is not so cold.
Press the
button then ask the speaker again, what's the time now?
The speaker will reply: it is 8 o'clock now.
Press the
button then tell the speaker, play music.
The speaker will reply: here is the station we found. the music will be played.
4. Before asking or requiring the speaker, press the
button first. Except the examples
stated above, you may ask the speaker to do more things desired.
11
TROUBLESHOOTING
Check the following before requesting service:
SYMPTOM
POSSIBLE CAUSE
POSSIBLE SOLUTION
Can’t power on
Built in battery drained
No sound or
sound weak
Volume level of paired/connected device Rise the volume level of the
is in low level
paired/connected device
Sound
distortion
Volume level of the connected/paired
Reduce the volume level of the
device too high
connected/paired device
BT not
f unctioning
Recharge the battery
The external BT device had NOT paired to Pair the external BT device to the
the unit
unit
The external BT device too far from the
Place the external BT device
unit
close to the unit
SPECIFICATTIONS
Power source: Built-in DC
3.7V, 2200mAh (7.4WH) rechargeable Li-ion Battery,
5V through Micro USB Port
Recharge by DC
BT Version:
BT Operation Distance:
Wifi Operation Distance:
4.1
about 32 Feet in open area
about 96 Feet in open area
PACKAGE INCLUDES
1 x User ’s Manual
1 x USB Connection Cable (For Charging Only)
1 x Audio Connection Cables with 3.5mm Plugs
SPECIFICATIONS AND ACCESSORIES ARE SUBJECT TO CHANGE
WITHOUT NOTICE
12
LIMITED WARRANTY
NAXA LIMITED WARRANTY (“Warranty”) — For Product Categories Listed in Chart Below (as applicable, “Product”).
Before returning your Product for service under this Warranty, please read the instruction manual carefully and visit our website at
www.naxa.com for product updates and extended support documentation (e.g., Frequently Asked Questions, Common
Troubleshooting Guides, etc …). If you are still having trouble with your Product, please contact Naxa Customer Support.
Warning: Some Products may contain components that are small enough to be swallowed. Please keep out of reach of children.
Subject to the terms and conditions herein, Naxa Electronics, Inc. (herein after called “Naxa”) warrants to the original purchaser of the
Product (“Customer”) that the Product will be free from defects in material or workmanship under normal, non-commercial use
(“Defects”) for the applicable Warranty Period listed below.
Warranty Period encompasses separate “Coverage Periods” for Parts and Labor as listed in the table below. Each Coverage Period
begins from the original date of Customer purchase. If Customer returns a defective Product (or any component thereof) during the
applicable Coverage Period, Naxa will, at its option: (1) repair the Product (or any component thereof) or; (2) replace the Product (or
any component thereof) with a new or refurbished Product (or any component thereof), in either case free of charge to Customer for
Parts and/or Labor during the specified Coverage Period only, and excluding the applicable shipping charges noted below for which the
Customer is responsible. The foregoing states the Customer’s exclusive remedy and Naxa’s sole liability for breach of the limited
warranty contained herein.
This warranty specifically excludes any product that has been subject to or has defects resulting from:(a)any neglect or misuse by a
Customer; (b) an accident, improper application, violation of operating instructions for the Product, or any other Customer-induced
damage; (c) the alteration or removal of any Product serial number; (d) any modification or repair to Product (or any component
thereof) by any party other than Naxa or a party authorized in writing by Naxa; (e) any damage to Product due to power surges,
incorrect electrical voltage, misconnection to any device, or malfunction of any device used with the Product (or, as applicable, any
component thereof); (f) cosmetic damage to the Product caused by normal wear and tear; (g) shipping damage that occurs while the
Product is in transit; (h) damage caused by heat sources, sunlight, electromagnetic conditions, or other climatic conditions; or (i) any
acts of God. Refurbished products are not covered by this Warranty.
Product is sold to Customer for personal, non-commercial use only. Product is not warranted for commercial or rental use. In addition,
Product is not warranted against failure, and should not be used by Customer for any application where there is a risk that any data
stored on Product will be breached or otherwise compromised, or the data stored on Product is relied upon for medical or lifesaving
applications. Naxa disclaims any Warranty for any of the foregoing uses to the fullest extent permitted by law. Customer assumes any
and all risks associated with such uses of Product, and agrees to indemnify Naxa for any damages claimed for such uses.
EXCEPT FOR THE EXPRESS WARRANTIES STATED ABOVE AND TO THE MAXIMUM EXTENT PERMITTED BY LAW, ALL PRODUCTS ARE
PROVIDED “AS IS”, AND NAXA DISCLAIMS ALL OTHER WARRANTIES, INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTY OF (I)
MERCHANTABILITY; (II) FITNESS FOR A PARTICULAR PURPOSE, OR; (III) NON-INFRINGEMENT OF THIRD PARTY RIGHTS. TO THE
MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT WILL NAXA BE LIABLE TO CUSTOMER OR ANY THIRD PARTY FOR
ANY INDIRECT, SPECIAL, INCIDENTAL, CONSEQUENTIAL, EXEMPLARY OR PUNITIVE DAMAGES, INCLUDING, WITHOUT LIMITATION, ANY
LOST PROFITS OR REVENUES, LOSS OR INACCURACY OF ANY DATA, OR COST OF SUBSTITUTE GOODS, REGARDLESS OF THE THEORY OF
LIABILITY (INCLUDING NEGLIGENCE) AND EVEN IF NAXA HAS BEEN ADVISED OF THE POSSBILITY OF SUCH DAMAGES, NAXA’S
AGGREGATE LIABILITY TO CUSTOMER FOR ACTUAL DIRECT DAMAGES FOR ANY CAUSE WHATSOEVER SHALL BE LIMITED TO THE
CUMULATIVE PRODUCT FEES PAID BY THAT CUSTOMER FOR THE PRODUCTS CAUSING THE DAMAGES, IF ANY.
This Warranty gives Customer specific rights, and Customer may also have other rights that vary from jurisdiction to jurisdiction.
All warranty returns must have an RMA number provided by Naxa Customer Support. An RMA number can be obtained by contacting
Naxa Customer Support by phone, email, or online by using the RMA ticketing system at www.naxa.com.
Naxa Electronics, Inc.
RMA Processing / Customer Support
2320 E. 49th St., Vernon, CA 90058
Email: support@naxa.com
Phone: (866) 411-6292
Web: www.naxa.com
Hours of Operation:
Monday – Friday
10:00 AM to 5:00 PM PST

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Create Date                     : 2016:12:17 17:18:16+08:00
Creator                         : Adobe Illustrator CS6 (Windows)
Modify Date                     : 2017:03:28 14:59:53+08:00
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Format                          : application/pdf
Title                           : 未标题-1
Metadata Date                   : 2017:03:28 14:59:53+08:00
Creator Tool                    : Adobe Illustrator CS6 (Windows)
Thumbnail Width                 : 256
Thumbnail Height                : 256
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 2593 bytes, use -b option to extract)
Instance ID                     : uuid:3763f4cf-470a-4969-8ce0-557ddb07f08b
Document ID                     : xmp.did:71ED92BA39C4E611A915F3AE14570C9A
Original Document ID            : uuid:5D20892493BFDB11914A8590D31508C8
Rendition Class                 : proof:pdf
Derived From Instance ID        : uuid:2304d5ad-13c6-af41-8646-360ef867abec
Derived From Document ID        : xmp.did:0980117407206811822A897E387FE54C
Derived From Original Document ID: uuid:5D20892493BFDB11914A8590D31508C8
Derived From Rendition Class    : proof:pdf
History Action                  : saved
History Instance ID             : xmp.iid:71ED92BA39C4E611A915F3AE14570C9A
History When                    : 2016:12:17 17:18:10+08:00
History Software Agent          : Adobe Illustrator CS6 (Windows)
History Changed                 : /
Startup Profile                 : Print
Has Visible Overprint           : False
Has Visible Transparency        : False
N Pages                         : 1
Max Page Size W                 : 148.498429
Max Page Size H                 : 210.001652
Max Page Size Unit              : Millimeters
Swatch Groups Group Name        : 明亮
Swatch Groups Group Type        : 1
Swatch Groups Colorants Swatch Name: C=60 M=90 Y=0 K=0
Swatch Groups Colorants Mode    : CMYK
Swatch Groups Colorants Type    : PROCESS
Swatch Groups Colorants Cyan    : 60.000002
Swatch Groups Colorants Magenta : 90.000004
Swatch Groups Colorants Yellow  : 0.003099
Swatch Groups Colorants Black   : 0.003099
Producer                        : Adobe PDF library 10.01
Page Count                      : 13

EXIF Metadata provided by EXIF.tools