Junlan Electronic CAW45320 ALEXA PORTABLE SPEAKER VOICE ACTIVATED WATER PROOF User Manual 1

Shenzhen Junlan Electronic Ltd ALEXA PORTABLE SPEAKER VOICE ACTIVATED WATER PROOF 1

Users manual

MODEL: MSH318 PLEASE READ BEFORE OPERATING THIS EQUIPMENT.OWNER'S MANUALALEXA PORTABLE SPEAKER VOICE ACTIVATED WATER PROOFSize: 148.5(W) x 210(H)mm (A5)
WARNING:TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.WARNING:TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, AND ANNOYING INTERFERENCE, USE THE RECOMMENDED ACCESSORIES ONLY.FCC NOTICE:This equipment has been tested and found to complywith the limits for a Class B digital device, pursuant topart 15 of the FCC Rules. These limits are designed toprovide reasonable protection against harmfulinterference in a residential installation. This equipmentgenerates, uses and can radiate radio frequency energyand, if no nstalled and use n accordance with theinstructions, may cause harmful interference to radiocommunications.However, there is no guarantee that interference will notoccur in a particular installation. If this equipment doescause harmful interference to radio or televisionreception, which can be determined by turning theequipment off and on, the user is encouraged to try tocorrect the interference by one or more of the followingmeasures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.FCC WARNING:To assure continued compliance, follow the attached installation instructions and use only shielded cables when connecting to other devices. Modifications not authorized by the manufacturer may void user`s authority to operate this device.CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOTEMOVE COVER (OR BACK). NO USER-SERVICEABLE ARTNSIDE EFER SERVICING T UALIFIED ERVICE PERSONNEL.The lightning flash with arrowhead symbolwithin an equilateral triangle is intended to alertthe user to the presence of uninsulateddangerous voltage within the product`senclosure that may be of sufficient magnitude toconstitute a risk of electric shock to persons.The exclamation point within an equilateraltriangle is intended to alert the user to thepresence of important operating andmaintenance(servicing) instructions in theliterature accompanying the appliance.S IPSO Q. RRt d iiCAUTIONRISK OF ELECTRIC SHOCK DO NOT OPENIMPORTANT SAFETY INSTRUCTIONS2To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna.Changes or modifications made to this equipment not expressly approved by (manufacturer name) may void the FCC authorization to operate this equipment FCC ID:OKUCAW45320
Before using the unit, be sure to read all operating instructions carefully. Please note that theseare general precautions and may not pertain to your unit.For example, this unit may not have the capability to be connected to an outdoor antenna. 1) Read these instructions. All the safety and operating instructions should be read before the product is operated.2) Keep these instructions. The safety and operating instructions should be retained for future reference.3) Heed all warnings. All warnings on the product and in the operating instructions should be adhered to.4) Follow all instructions. All operating and use instructions should be followed.5) Do not use this apparatus near water. Do not use this product near water and moisture, for example: near a bathtub, washbowl, kitchen sink or laundry tub; in a wet basement; or near a swimming pool.6) Clean only with dry cloth. Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a dry cloth for cleaning.7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. Slots and openings in the cabinet and in the back or bottom are provided for ventilation, to ensure reliable operation of the product and to protect it from overheating. These openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug or other similar surface. This product should never be placed near or over a radiator or heat source. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer's instructions have been adhered to.8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus(including amplifiers) that produce heat.9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.10)Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.11)Only use attachments/accessories specified by the manufacturer.12)Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. An appliance and cart combination should be moved with care. Quick stop, excessive force and uneven surfaces may cause the appliance and cart combination to overturn.13) Unplug this apparatus during lightning storms or when unused for long periods of time.To protect your product from a lightning storm, or when it is left unattended and unused for longperiods of time, unplug it from the wall outlet and disconnect the antenna or cable system. Thiswill prevent damage to the product due to lightning and power-line surges.14) Refer all servicing to qualified service personnel. Servicing is required when the apparatushas been damaged in any way, such as power-supply cord or plug is damaged, liquid hasbeen spilled or objects have fallen into the apparatus, the apparatus has been exposed to rainor moisture does not operate normally, or has been dropped.15) Power sourceThis product should be operated only from the type of power source indicated on the marking label.If you are not sure of the type of power supply to your home, consult your appliance dealer or localpower company. For products intended to operate from battery power, or other source, refer to theoperation instructions.16) Power lines An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal. IMPORTANT SAFETY INSTRUCTIONS3
17) Overloading Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock.18) Object and liquid entry Never push objects of any kind into the product through openings as they may touch dangerous voltage points or short out parts that could result in fire or electric shock. Never spill or spray any type of liquid on the product.19) Outdoor antenna grounding If an outside antenna is connected to the product, be sure the antenna system is grounded so as to Provide some protection against voltage surges and built up static charges. Section 810 of the National Electric Code ANSI/NFPA 70 provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge product, size of grounding conductors, location of antenna-discharge product, connection to grounding electrodes and requirements for the grounding electrodes.20)Service Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.21)Replacement parts When replacement parts are required, be sure the service technician uses replacement parts specified by the manufacturer or those that have the same characteristics as the original parts. Unauthorized substitutions may result in fire or electric shock or other hazards.22)Safety check Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition.3 24)Damage requiring service Unplug this product from the wall outlet and refer service to qualified service personnel under the following conditions. a) When the power-supply cord or plug is damaged. b) If liquid has been spilled or objects have fallen into the product. c) If the product has been exposed to rain or water. d) If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions, as an adjustment of other controls may result in damage and will require extensive work by a qualified technician to restore the product to its normal operation. e) If the product has been dropped or the cabinet has been damaged. f) When the product exhibits a distinct change in performance-this indicates a need for service.2)Note to CATV system installer This reminder is provided to call the CATV system installer's attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical. NOTE: Refer all servicing to qualified service personnel. Servicing is required when the unit has been damagen any way such as the following: the power-supply cord or plug has been damaged, liquid has beepilled into unit, the unit has been exposed to rain or moisture, the unit has been droppe r the unit doeot operate normally. IMPORTANT SAFETY INSTRUCTIONSd in s d o s n4
SOU RC EFM SCANSLE EP S NOOZE DIM MERWPSVOL UM E12345 6 7 8 9 10 11 12 13141516 17418 19ANTLine i n1A char ge on lyDC INDC 5V, 2A5Location of ControlsTOP VIEW:REAR VIEW:
21206Location of Controls1. LED Indicator Bar2. SOURCE ButtonPress repeatedly to select the playback source3. Microphone ButtonPress to active the Alexa Microphone4.Built-in MicrophonesFRONT VIEW:BOTTOM VIEW:
7Location of Controls5.SLEEP ButtonIn power on mode, press repeatedly to activate and set the sleep timer.6.FM SCAN ButtonIn first time use (or relocated the Clock to a new location), press to search and store theavailable FM stations.7. Microphone Off ButtonPress and hold to turn off the microphone press and hold again to turn it on.8.WPS (WPS, Play/Pause) ButtonIn Wifi connecting mode, press and hold to enter to the Wifi set upmode.In Wifi connected mode, press and hold to disconnect Wifi network.In audio playback mode, press to pause. Press again to resumenormal playback.9. (Power On/Off) ButtonPress and hold to turn on the Clock from standby mode, press and hold again to back tostandby mode.10. (Previous) ButtonIn Radio mode, press to play the previously stored Radio station.In music playback mode, press repeatedly to skip toprevioustracks.11. (Next) ButtonIn Radio mode, press to play the next stored Radio station.In music playback mode, press repeatedly to skip tonext tracks.12. SNOOZE ButtonWhen alarm goes off:Press to activatefunction, the alarm will turn back onautomatically nine (9)minutes later. This feature can be repeatedly until the Alarm is shut off.Or, press and hold approximately 1 second to shut off the Alarm.13. DIMMER ButtonPress repeatedly to adjust the brightness level of the display as desired.14. - (Volume Down) ButtonPress repeatedly to reduce the volume level as desired.15. + (Volume Up) ButtonPress repeatedly to rise the volume level as desired.16.17. USB PortTo recharging the external USB Device.18. Line in Jack19. ANT ( WireFM Antenna)20. Display21. Button Cell Compartment,.tothe snoozeIN JackDC
Follow these Battery Precaution when using a battery in this device:1. Use only the size and type of battery specified.6. Do not dispose of battery in fire. Battery may explodes or leak.7. Clean the battery contacts and also those of the device prior to battery installation.BATTERY PRECAUTIONS:2. Be sure to follow the correct polarity when installing the battery as indicated in the battery compartment. A reversed battery may cause damage to the device.3. Do not mix different types of batteries together (e.g. Alkaline and Carbon-zinc) or old batteries with fresh ones.4. If the batteries in the device are consumed or the device is not to be used for a long period of time, remove the batteries to prevent damage or injury from possible battery leakage.5. Do not try to recharge the battery not intended to be recharged; it can overheat and rupture. (Follow battery manufacturer’s instructions.)8. This product contains a coin/button cell battery. If the coin/button cell battery is swallowed, it can cause severe internal burn in just 2 hours and can lead to death.Keep new and used batteries away from children. If the battery compartment does not closesecurely, stop using the product and keep it away from children.If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.CR2032LITHIU M BATTERY3V................................................Fig.1 Fig.2 Fig.3 8Button Cell Installation (For Clock Back Up)If th AC power failure, this electronic clock is designed to continue operating internally(without showing the time on the Clock Display) with a CR2032 button cell (included). Install it(or replace it when it is drained) as follows:1.Loosenthe screw on the Button Cell Compartment witha Philipsscrewdriver (not included) asFig. 1 below.2.Press the tab on the door then lift it off.3.Install (or replace) thasFig. 2 below according to the polaritydiagram inside theButton Cell Compartment.4.Closethe door and tighten the screw on it as Fig. 3below.ere isebuttoncellshows
9Preparation:“Amazon Alexa”“MAGNAVOX Alexa Player”Alexa Devices<MSH318GENERALDo Not DisturbOffDevice Time ZonePacific Daylight Time(Los Angeleses)Follow-Up ModeMeasurement UnitsFahrenheit,MilesRegistered ToXXXX DeregisterAboutOffDevice LocationEdit nameDevice Time Zone<United StatesTIME ZONESAlaska Daylight TimeAnchorageCentral Daylight TimeChicagoEastern Daylight TimeNew York...ChangePacific Daylight TimeLos AngelesWiFi SetupTo synchronize the correct time to your Clock you must connect your device to the same connect to the same 2.4G Wi-Fi Network.Wifi network with the Note: All Devices must“MagnavoxAlexa”app following the instructions below. 1. Create and register an Amazon user account:(If you already have an Amazon account, you can skip this step. But, please make sure that you set in the same time zone your clock is located.)then install it following the on screen instructions from your mobile device. Download the app from the Apps Store into your mobile device During installation, you should register the time zone's region your clock will display. Otherwise, the actual time shown on the clock may be incorrect.Play or Apple Apps Store into your mobile device following the on screen instructions2. Download; install and register the app from the Googlefrom your mobile device.
ANTLine i n1A char ge on lyDC INDC 5V, 2A10Wifi Connection:Connect the unit to AC power as below:Connect the small plug from the AC/DC adaptor to the DC IN Jackon the rear ofthe Clock.To AC outletAC/DC AdapterTo the DC IN jackon the rear of the unit1. Make sure the time zone setting on your mobile device is samediffer to your Amazon time.as your Amazon account. Otherwise, the time showing on the Clock mayPress and hold the “ ”Button until the display is illuminated.Time“12:00”will appear on the display and blink. You will also hear an audible say“Power on; Wi-Fi mode”. The Wifi icon “ ” will appear on the display and blink.Powerprompt“Enteringset up mode; follow the instruction on the app tofinish set up”.2. Connect your mobile device to your 2.4G Wifi network.3.4.5.Connect the AC/DC adaptor to wall outlet having AC 100-240V~, 50/60Hz. Wait approximately 30 seconds (Or press and hold the Button) until you hear an audible prompt say“WPS ”
11Searching for MAGNAVOX Wireless Hi-Fi System..Please make sure your device is powered up.Your phone is connected to XXXX, same network.Add Deviceplease make sure your device is connected to thescan and search the available devices automatically.Experiencing any problems? Give us your feedback>>Connect SpeakerMSH318>ADD DEVICEPlease select your deviceSOURCEFM SCANSLEEP SN OOZE DI MMERWPSVOLUMEOpen the APP “MAGNAVOX Alexa Player” in your mobile device.Then it will start to Read the on screen instructions and Connect SpeakerMSH315V>ADD DEVICEPlease select your deviceAddDevicetouch the " " Button on the screen to continue. 6.Fig. A Fig. B7. The following Fig.A will appear. Touch the Button on the screen. The devices list will appear. Touch the on it. The follows Fig. B will appear. Touch the Button on the screen to continue.“V”“MSH318” “ConnectSpeaker”
12SETUPGo to your Phone's Wi-Fi settingsand select the Wi-Fi starting withMSH318_XXXX to connect.Then, come back to this App.Could not find MSH318_XXXX?SettingsWi-Fi MSH318_XXXX <Settings Wi-FiWi-FiCHOOSE A NETWORK...ABCDEFABC-XXXOther...iiiSETUPContinueMSH318_XXXXSOURCEFM SCANSLEEP SN OOZE DI MMERWPSVOLUME<seconds to put into setup mode.Press and hold the WPS button on your speaker for 5SELECT NETWORKChoose the network you want the device toPassword Please enter Wi-Fi passwordXXXXABC-XXX12345ABC123Continueuse. MAGNAVOX only supports 2.4G networks.8. The follows screen will appear. Touch thesetting menu.Button on it to enter to Wifi “Settings” If the connection is failure and the follows screen appear. Press and hold the Button approximately 5 seconds to restart the setting procedures.“WPS ” Clock) in the available Wifi devices list on your mobile device then touch it to enter.9. Find our Model number “MSH318_XXX” mobile device's screen to return to previous setting page. Wait a few seconds, the Wifi network list will appear. Select and touch the button of your 2.4G Button to continue.Notes: The Wifi network you selected 10. Touch the Button on the “RETURN”Wifi network. Then touch the “Continue”Password of the network may need enter if set. (XXX is the identify number of the existing your mobile device using. must same as the 2.4G network NOTE:
Cancel SetupTry Again13CONNECTEDCurrent Wi-Fi strength of device:100%NextCONNECT FAILHelp1.Your Phone is connected to wirelessnetwork xxxxx_XXXX and your speaker isconnected to XXXXX. Please go to yourPhone's WiFi Settings and connect toXXXX.2.Failed to setup your speaker. Please retryif you entered the password incorectly.Check help for alternate setup method forWiFi setup.If the connection is failure, the following screen Custom...BathroomBed RoomDining RoomDenFamily RoomFoyerGarageNAME DEVICEGardenMSH318_XXXXSign in with AmazonCancelYour device includes acess to Alexa.Connect your Amazon account toaccess personalized features.Alexa allows you to use your voice to play musicand get news, sports scores, weather and more-all hands-free.All you have to do is ask Alexa.11. Wait a few seconds, the follows screen will appear. Touch the "Next" Button on it to continue. will appear. Touch the “Try Again” Button on it to restart the settings follows the on screen instructions.12. The follows screen will appear, touch the Button on it to continue. “>”>13. The follows screen will appear, touch the Button on it to continue. "Sign in with Amazon"NOTE:
14<AMAZON LOGINCreate account NameYour email addressCreate a passwordShow passwordCreate your Amazon accountBy create an account, you agree to the terms and conditions below.15. If you do not have an Amazon on screen instructions.account, then to start registration and create a new Amazon account follows the<AMAZON LOGINEmail (phone for mobile accounts)Amazon passwordShow passwordKeep me signed in. DetailsSign inNew to Amazon?Create a new Amazon accountSign in Forgot password?<AMAZON LOGINAlexa processes and retains audio, interactions,and other data in the cloud to provide and improveour services.Alexa allows purchasing byLearn more.CancelAllowUse and All terms found here.By tapping"Allow", you agree to Amazon's Conidtions ofMSH318 would like accessto:Alexa Voice Servicevoice using your default payment and shipping settings. You can require a speakable confirmation code, turn off voice purchaing, and see product and order details in your Alexa App or on alexa.amazon.com.Select your country orNext17. The following screen will appear, select<AMAZON LOGINThis way, Alexa will give you more accurate responses.United StatesRegion<14. The follows screen will appear, sign in your Amazon account follows the on screen instructions. 16. When sign in, the following screen appear, touch the Button on it to continue.“Allow” and set the region you are, then touch touch Button “Create a new Amazon account”Button to continue.“Next”
15Please choose your preferedDeutschlanguage for Alexa.English (United States)English (United Kingdom)Settings".You can change the language later in "Amazon Alexa18. The following screen will appear, touch theHere are some of the many things you can ask Alexa.Alexa, what's the weather?Alexa, play my Flash Briefing.Alexa, what are some top-rated Indian restaurants?Alexa, set a timer for 20 mins.NextAlexa is ready19. The following screen will appear, touch NextWe value your privacy, so you can disable your microphone as shown inthe image above.To learn more and acess additional20. The following screen will appear. Then you can turn off the Alexa Microphone following App.How to switch between solo and multi mode?<DEVICE LISTRYou Belong with Me.Pause AllLBedroom I got it!Bedroomfeatures, download the Amazon Alexa “Power off”.button of the desired language.Button to skip this setting then go to next step.standby mode. You will hear an audible prompt say 22. Once the set up is finished, press and hold the Power Button to turn the Clock to the Button on it.“Next”the on screen instructions or touch the “Next”“I got it”21. The following screen will appear, touch the Button to complete the settings.“ ”
16OperationAlexa:Press and hold the “ ”Button approximately1second to turn onthe clockfrom standby mode. Icon “ ” will appear on thedisplay and you will hear an audibl say “Power on; Wi-Fi mode”.Wait approximately 30 seconds until the clock is automatically connected toyour Wi-fi network and Amazon, you will hear an audible say“Connected to your Wifi network”.Say“Alexa”tothemicrophoneorpress the“ ”Button,theIndicator Bar will illuminate. Ask your questions or instructions to themicrophone then wait reply fro . For example,(Alexa) Who are you?(Alexa) What's the time now?(Alexa) What's the news today?(Alexa) Play asong.(Alexa) Stop (or Pause) the song.ALARM:Alarm set:In Wifi connection mode, say“Alexa” to the microphone or press the“ ”Button, the Indicator Bar will illuminate. Then,(Alexa) Set an alarm.will reply: Alarm for what time?(Alexa) Eight AM.will reply: Alarm set for eight AM.When alarm is set and activated, the indicator “alarm1” will appearon thedisplay.When finished, press and hold the “ ”Button to turn the unit tostandbymode. You will hear an audibl say “Power off”.Powere promptpromptMicrophonefor a m Alexa You can ask:Powere promptMicrophone ask Alexa to:1.2.3.4.1.2.AlexaAlexaAfter the Clock was connected to Wifi network and sign in to Amazon as instructed earlier.
17More than one alarmcan be set, repeated the same proceduresuntil allalarms are set.IMPORTANT:When using the Alexa alarm clock (or timer), make sure the Clock is inpower on mode and connected to the Wifi network and Amazoncontinually. Otherwise, the alarm will not function.Snooze:When alarm goes off, press the SNOOZE Button, the Indicator Bar willilluminate and blink. The alarm will turn back on automatically nine (9)minutes later. This feature can be repeatedly until the Alarm is turned off.Shut off alarm:When alarm goes off, press and hold the SNOOZE Button to shut off alarm.The indicator “alarm1” will disappear on the display.Cancel alarm:In Wifi connection mode, say “Alexa” to the microphone or press the “ ”Button, the Indicator Bar will illuminate. Then,(Alexa) Cancel alarm.will reply: XX alarm cancel.If more than one alarm time was set, cancel it following her instructions.RADIO:Press and hold the “ ”Button approximately1 second to turn onthe clockfrom standby mode. Indicator “ ” will appear on the display andyou will hear an audibl say “Power on; Wi-Fi mode”.Press the “Source” Button repeatedly until the indicator “radio” appearson the display.In first time use (or relocated the Clock to a new location), search andstore the available FM stations by pressing the “FM SCAN” Button. TheClock will automatically search and store all available FM radio stationsthen play the first stored FM station.Microphone ask Alexa to:Powere prompt3.1.2.3.Alexa
18Press therepeatedly to select and playthe desiredstored radio station.Press the VOLUME +/- buttons to adjust volume level as desired.AUX/LINE IN:Listen music from the external Audio Player such as MP3 Player, Discman…ETC:In power off mode, connect one end of the Audio Connection Cable (notincluded) to the AUX Out / Line Out / Phone Jack on the external AudioPlayer.Connect the other end of the cable to the “Line in” Jack on the rear of theClock.In power on mode, press the “Source” Button repeatedly until the indicator“line-in” appear on the display.Play the music on the connected Player as usual. (Make sure the volumelevel of the connected Audio Player is turned to high level.)Press the VOLUME +/- buttons to adjust volume level as desired.Stream and play music through the Clock from Amazon:Press and hold the “ ”1 second to turn on theclockfrom standby mode. Icon “ ” will appear on the display and you willhear an audible say “Power on; Wi-Fi mode”.Wait approximately 30 seconds until the clock is automatically connected toyour Wi-fi network and Amazon, you will hear an audible say“Connected to your Wifi network”.orWhen finished, press and hold the “ ”to turn the unit tostandbymode. You will hear an audibl say “Power off”.When finished, press and hold the “ ”to turn the unit tostandbymode. You will hear an audible say “Power off”.(Back or Forward) buttonsPower Buttone promptPower ButtonpromptPower Button approximatelypromptprompt4.5.6.4.5.6.1.2.3.MUSIC PLAYBACK:1.2.The FM Wire Antenna on the rear of unit is for FM reception. If reception is weak, unwind it to full length and/or reassemble the other direction/location to improve reception.Antennas :You will also hear an audible prompt say Auxiliary Mode .“ ”
::19Say“Alexa”tothemicrophoneorpress the“ ”Button,theIndicator Bar will illuminate. Say your instructions to the microphone thenwait the reply from her.(Alexa) Play the song.Then select and play the musicYou can also stream and play music through the Clock from mobiledevice on your Wifi network by using the “MAGNAVOX Alexa Player” app.Press and hold the “ ”1 second to turn on theclockfrom standby mode. Icon “ ” will appear on the display and you willhear an audible say “Power on; Wi-Fi mode”.Wait approximately 30 seconds until the clock is automatically connected toyour Wi-fi network and Amazon, you will hear an audible say“Connected to your Wifi network”.Open the “MAGNAVOX Alexa Player” in your mobile device. Playthe music on your device or through other Music Store following the onscreen instructions.The Clock has a built-in USB Charger, connect the external USB Device tothe USB Port on the rear of the Clock for recharging.MicrophoneYou can say:following Alexa instructions.Power Button approximatelypromptyourappBUILT-IN USB CHARGER:4.5.3.1.2.3.To charging port of the external deviceUsing PROPER USB charging cable(not included)1A charge onlyTo USB Port on the rear of the ClockDIMMERSLEEP TIMERPress the “DIMMER” Button repeatedly to adjust the brightness level of the display as desired. on the display. Press the button repeatedly to set the sleep timer to 10 – 90 Press the Button to activate the sleep function, sleep timer will appearSLEEP“ ” minutes as desired. To turn off the sleep timer before the time is up, press andhold the Power Button to turn the Clock to standby mode.“ ”
Check the following before requesting service:SYMPTOM POSSIBLE CAUSE POSSIBLE SOLUTIONCan’t power onVolume level of paired/connected deviceis in low levelR ise the volume level of theconnected deviceVolume level of the connecteddevice too highReduce the volume level of theconnected deviceNo sound orsound weakSound distortionWi-Fi notfunctioningAmazon Alexanot functioningThe unit is not in the Amazon Alexaoperation modePower on the unit andenter to Amazon AlexaVolume level in minimum position Raise the volume level by pressing the + Button on the top of ClockVolume level too high a Reduce the volume level by pressing the - Button on the top of ClockFM weak receptionThe adapter is not plugged Plug the adapter properly20operate mode as page 163. Mild soap and a damp cloth may be used.1. To prevent fire or shock hazard, disconnect your unit from the AC wall outlet when cleaning.2. The finish on your unit may be cleaned with a dust cloth and cared for as other furniture. Use caution when cleaning and wiping the plastic parts.Troubleshooting GuideThe Clock is in standby mode Press and hold the " " Button to Cleaningnetwork and sign in Amazon account as page 9-15 network and had NOT sign in Amazon accountAdd the Clock into the Wi-FiThe Clock had NOT add in the Wi-Fiturn on the Clock from standby modeThe Clock and the mobile devices is not in the same 2.4G Wi-Fi networkSet the Clock and the mobile device in the same 2.4GWi-Fi networkUnwind the FM Wire Antenna to its full length and/or reassemble the other direction/location to improve reception
SPECIFICATIONS AND ACCESSORIES ARE SUBJECT TO CHANGEWITHOUT NOTICE21Power Source:Wi-Fi Operation Range:FM Radio Coverage:1 x Owner's Manualup to 96 feet in open area87.5-108.0 MHzGeneral SpecificationsAccessories1 x AC/DC Adaptor (Input: AC 100-240V~;50/60 Hz, 0.5A Max Output: DC 5V, 2A, )Clock Back Up: 1 x CR2032 Button CellUSB Charger Output: Wifi Type: IEEE 802.11 b/g/nDC 5V, 2A, DC 5V, 1A Max.
Craig Electronics warrants this product to be free from manufacturing defects in material and workmanship under normal use for a period of 180 days from date of purchase. If service is required, please return the product to the store where it was purchased for exchange; or, pack the unit in the original packing material with all accessories if applicable, a copy of your sales receipt and a Cashier’s check or Money Order for $15 (to cover shipping and handling costs) payable to Craig Electronics Inc. For consumers in Canada, please make sure that the cashier check or money order is redeemable through a U.S. bank. Ship your product freight pre-paid. Your unit will be repaired, replaced or if the unit cannot be repaired or replaced, a refund will be forwarded to you within four weeks of receipt of your unit. Please ship your unit to:Craig Electronics Inc.1160 NW 163 DriveMiami, Fl 33269This warranty is void if the product has been: a) Used in a commercial application or rental. b) Damaged through misuse, negligence, or abuse. c) Modified or repaired by anyone other than an authorized Craig service center. d) Damaged because it is improperly connected to any other equipment.Note: This warranty does not cover: a) Ordinary adjustments as outlined in the Owner’s Manual which can be performed by the customer. b) Damage to equipment not properly connected to the product. c) Any cost incurred in shipping the product for repair. d) Damage to the product not used in the USA.This warranty is not transferable and only applies to the original purchase. Any implied warranties, including the warranty of merchantability, are limited in duration to the period of this expressed warranty and no warranty whether expressed or implied shall apply to the product thereafter.Under no circumstance shall Craig be liable for any loss or consequential damage arising out of the use of this product. This warranty gives specific legal rights. However, you may have other rights which may vary from state to state. Some states do not allow limitations on implied warranties or exclusion of consequential damage. Therefore, these restrictions may not apply to you.This product has been manufactured by and is sold under the responsibility of Craig Electronics Inc, and Craig Electronics Inc is the warrantor in relation to this product. MAGNAVOX and SMART. VERY SMART are registered trademarks of Koninklijke Philips N.V. and are used under license from Koninklijke Philips N.V.To Obtain Service on your Productemail: magnavox@craigelectronics.comPrinted in China MSH318_WC_E0CL1_B0USLIMITED WARRANTY

Navigation menu